「Casing」の共起表現一覧(1語右で並び替え)

Casing

1語右で並び替え

該当件数:154件

  • different cover and includes a special 3-piece casing, a DVD that contains the music videos of Color
  • roleum industry to cut a complete section of a casing, a liner or all others tubular components in a
  • ting of the gun emplacement, and then the deck casing above the pressure hull.
  • ept of Davros being rebuilt within a new Dalek casing after the remains of his original body had bee
  • During drilling, the casing also guides the drill bit and drive shaft in a
  • h perforations that have been made through the casing and cement (the casing is a larger metal pipe
  • With explosives sealed inside a sheet metal casing and fitted with a pressure-actuated fuze, Tell
  • ore and rises up the annulus between the steel casing and the formation.
  • angular, thin fragments, which, along with the casing and detonator fragments, deccelerate rapidly i
  • It is significantly lighter than casing and does not require a drilling rig to run in
  • ESC-B with the improvements to the solid motor casing and an uprated Vulcain engine would deliver 27
  • te with the traditional brass GWR safety valve casing and copper-capped chimney.
  • The annular (ring-shaped) region between the casing and the drill stem is filled with drilling mud
  • any that detects the bond of the cement to the casing and formation via a principle based on resonan
  • not designed for long-term storage as both the casing and uranium metal core react with water, it is
  • eadlamp, sealed to prevent gas penetrating the casing and being ignited by electrical sparks.
  • e with the traditional copper GWR safety valve casing and copper-capped chimney.
  • s include completion tools, completion fluids, casing and tubular services, production chemical serv
  • stern of the submarine, cut through her outer casing and sliced open the pressure hull.
  • rlic, salt, and red pepper, fed into a sausage casing and allowed to dry for several weeks.
  • have a simple burster charge to split open the casing and spray fragments of WP through the air, whe
  • d rather like many automatic pistols, it has a casing and spring around the barrel; the whole casing
  • fers to any void between any piping, tubing or casing and the piping, tubing, or casing immediately
  • is pumped into the space (annulus) between the casing and the borehole to a depth sufficient to reta
  • However, the sand soon filled up the casing, and despite repeated attempts to clear it, th
  • Expanded casing applications concentrate on reducing the teles
  • x National Heritage, which placed a protective casing around its Victorian structure.
  • ery" with a conveyor belt built into the outer casing as pioneered by the converted M-class submarin
  • 65mm (.32 ACP) cartridge having a crimp in the casing at the base of the bullet.
  • ce safe, at times having to ease the distorted casing back with a hammer and chisel where it had mel
  • terior finish components such as doors, window casing, baseboard, mantels, and crown molding.
  • also removing eight new parts; and the barrel casing be made in one piece, to eliminate a minor dou
  • ng) refers to pumping kill-weight mud down the casing beneath closed blowout preventers in a kick-co
  • the Mark 8 had been nicknamed the LC or Light Casing bomb, which was then expanded to "Elsie".
  • grow up and where his father started a sausage casing business.
  • ngefinders, the LC5 is housed in a more modern casing, but retains identical controls.
  • a copper encased bullet tip and/or bullet side casing by clothing threads when the bullet first pene
  • lers and give a running clearance for the pump casing can be made by turning a nut threaded on the s
  • slurries than the displacement mud inside the casing causes the U-tube effect.
  • irradiates the U-238 tamper (or the U-238 bomb casing), causing it to undergo a fission reaction, pr
  • The M20 relied on a perforated artillery shell casing, combined with a rear vented breech using prop
  • The inner casing contained the explosive while the outer contai
  • DSI Casing Cutter details
  • Casing design for each size is done by calculating th
  • ons were brought about by machinery within the casing, each depending on wheels and shafts, hooks, p
  • For some purposes ( casing elevators, and loading pipe into and out of th
  • In place of a pastry casing enclosing the pie, a topping of mashed potatoe
  • It was a conical casing enclosing a shaped charge and containing 562 g
  • ion has been included with a protective silver casing, engraved on the front is the shape of a dog t
  • Note the amount of the casing exposed.
  • id-fuel rocket during boost, with the rocket's casing, following exhaustion of its propellant and th
  • casing formed on site in the borehole
  • Production tubing protects wellbore casing from wear, tear, corrosion, and deposition of
  • Packers may also be used to protect the casing from pressure and produced fluids, isolate sec
  • On both sides, there is a metal casing from which riders can grab small metal rings.
  • The casing hanger is that portion of a wellhead assembly
  • Casing Hangers may also be suspended within the wellh
  • Casing hangers must be designed to take the full weig
  • Its casing has five color options.
  • The back of the battery casing holds the phone's antenna so that its metal bo
  • e sure the cement flows all the way around the casing in order to prevent channeling.
  • tair was a solid-fuel rocket with a fiberglass casing, initially developed for use as the third stag
  • tubing is run into the drilled well after the casing is run and cemented in place.
  • The well casing is a steel pipe-liner that contains oil as it
  • The device's casing is made of plastic which is packed with plasti
  • A Mark 39 casing is on display in the Cold War Gallery of the N
  • A Mark 7 casing is on display in the Cold War hangar at the Na
  • It serves to ensure that the casing is properly located.
  • The casing is to be decorated with the faces of Jesus and
  • The outer casing is now made in a rubber compound to resist scr
  • The organ casing is the work of Messrs Moeller, organ builders
  • You can do this by casing it in [silicone]."
  • r a short ways, and usually lined with a metal casing known as a scabbard.
  • a British Sea Dart missile, despite a Sea Dart casing later being found "several hundred yards" away
  • Four magnets were attached to the casing made of hemp cloth, along with an external fuz
  • A high-performance casing material is required so the weapon survives th
  • Multiple strings in a casing may maintain a manageable shape for the tubing
  • king just before that occurs because the split casing may look unappetizing and the sausage may then
  • A typical piece of casing might be described as 9-5/8" 53.5# P-110 LT&C
  • his standard humbucker is fitted in the larger casing of the original pickup, using wax to fill the
  • recessed areas, and is often found inside the casing of expensive watches.
  • aphic evidence, it is likely that the exterior casing of the artillery shell itself was made of tita
  • P3 battery, creating a bulge in the lower rear casing of the appliance.
  • the gravity bomb role, it was fitted into the casing of the Yellow Sun weapon, even though the Red
  • cross a piece of galvanized steel, such as the casing of a lamp post or road divider, one observes t
  • contained 55 identical copies of scanned front casing of Xbox 360 version of Leisure Suit Larry: Box
  • gives view into the interior and the cylindric casing of the auditorium and its stairways, and the t
  • essive vortexing of the fluid as it leaves the casing of the pump
  • K2 smashed a hole in the forward casing of K12 and buckled her bows for about 6 feet (
  • . P. Mander in the 1950s, using the 1717 organ casing once belonging to All Hallows Bread Street.
  • ntly sized rubber plugs pumped down inside the casing open and then later close the sliding valves.
  • ges are used to propel the flares out of their casing, or to eject pyrophoric fluids from their cont
  • to describe a drinking cup made from that seed casing, or in a similar shape.
  • d to wrap around the tool joint of drill pipe, casing or lift nipples (for collars) to facilitate th
  • h hinged collars and bow springs help keep the casing or liner in the center of the wellbore to help
  • its periscope being destroyed and some of its casing plates penetrated by splinters.
  • ce the kill-weight mud has reached the bit the casing pressure is manipulated to keep drill pipe pre
  • s that allows monitoring of the drill pipe and casing pressures throughout the job, and facilitates
  • nt, centrifugal hole shaker, fitting tools for casing, Production tubing and technical inspection; g
  • care must therefore be taken when designing a casing programme that will meet the requirements of t
  • d the most traditional type features a natural casing, providing a distinctive "snap" when bitten.
  • The tower was covered in a asbestos cement casing, received a black band and was shortened by 2
  • The TX-16 shared a common forward and aft casing sections with the TX-14 and TX-17/24 and in th
  • of its design, including its large screen and casing, seem to have been reappropriated for use in t
  • tis Truck Lines, Quality Shipyards, and Benton Casing Services, Houma companies of which Lyons was p
  • time when exhibitions were traditionally show casing several artists at a time.
  • ablished 1907 when Reuben C. Baker developed a casing shoe that revolutionized cable tool drilling.
  • Few wells actually produce through casing, since producing fluids can corrode steel or f
  • by a priori knowledge of the rate at which the casing sinks and the time of each recorded data value
  • the O'Hanlon gang, giving him information and casing sites for him to rob.
  • e American Petroleum Institute standardizes 14 casing sizes from 4.5 inches (11.43 cm) to 20 inches
  • b variations of color, bracelet, movement, and casing sizes.
  • or the unerring precision of the joints of the casing stones (the blocks of the core show tools mark
  • No casing stones have been found, suggesting that the py
  • ge structural blocks and another for the white casing stones.
  • tubing is therefore installed inside the last casing string and the tubing annulus is usually seale
  • Bell nipple: An enlarged pipe at the top of a casing string that serves as a funnel to guide drilli
  • To reduce the loss of diameter each time a new casing string or liner is set, a cold working process
  • he squeezing pressure is applied to the entire casing string in what is known as a bradenhead squeez
  • When the casing string has been run into the wellbore it is hu
  • A liner is a casing string that does not extend to the surface, be
  • If casing strings are cemented off-center, there is a hi
  • sually made with the shortcrust or puff pastry casing that is associated with most savoury pies (e.g
  • Casing that is not bound has a higher resonant vibrat
  • e final examination, finishing, adjusting, and casing the movements.
  • And they made a wooden casing the surface of which represented the horizon,
  • tside the window, and the discovery of a shell casing therein confirm what Holmes has suspected - a
  • together by his loyal Dalek forces with a new casing, they inform Davros he has claimed the mantle
  • centimeters in diameter and is held inside the casing through the use of expandable packing devices.
  • lowborn artisan, to fashion a beautiful silver casing to hold the plain original cup that Jesus used
  • ek in the cult has a specific marking on their casing to set them apart from the others.
  • His company in Coventry manufactured mortar casing to Armscor's specifications, and also sub-cont
  • machine is fitted with a security shutter and casing to protect it from vandalism.
  • ston assembly and to the stationary compressor casing using auxiliary mechanical springs with zero v
  • When thoroughly cooked, its casing usually splits open.
  • he QEH) is through a massive sculpted concrete casing, visible from outside the entrance to The Hayw
  • barrow is supported by three concentric stone casing walls that appear to have overlapped each othe
  • ace damage, including collapsed or parted well casing, was observed only on 14 of 1,725 active wells
  • The shell casing was molded from cast iron and formed into a pi
  • A casing was set with a gate valve, and after running a
  • nition feed was enclosed in a drum, the recoil casing was lightened, and the cooling jacket was modi
  • The casing was some 21 feet (6.4 metres) long, 48 inches
  • The Sovereign was unusual because the casing was made from pressed steel.
  • For example, a large bomb casing was filled with small sticks of incendiary (bo
  • A Mark 90 depth charge casing was lost and never recovered, but it was not f
  • In 1853, the brick casing was removed from the tower by Philip Charles H
  • Additionally the casing was redesigned reducing its weight from approx
  • g on how the ground crew set a dial inside the casing when it was loaded onto an aircraft.
  • are typically welded onto the first string of casing, which has been cemented in place during drill
  • on the nose turned to release a spring loaded casing which, on opening, scattered 100 or more incen
  • Another thing to watch out for is the casing width - it may be too tight for a plate pintle
  • A cutaway diagram of a Yellow Sun casing with Red Snow warhead
  • was always envisaged that the Yellow Sun bomb casing would be adapted for successor warheads to min
  • coil, and, during the return stroke, the empty casing would be thrown backward by levers, and a cam