標準線源等を測定し、測定結果X 及び測定結果に伴う計数誤差による標準偏差σX の推定値を得る。基準値濃度における X/σX が10 以上となるように、試料容器及び測定時間を設定する。また、測定容器のみのブランクを設定した条件で測定し、検出限界値が基準値の1/5 の濃度以下であることを確認する。測定結果X、σX、及び検出限界値の算出方法は「文部科学省編放射能測定シリーズNo.7 ゲルマニウム半導体検出器によるガンマ線スペクトロメトリー」に記載の方法、あるいは国際的に認められた方法に従う。 Perform a measurement of volume radioactivity standard , etc., to estimate the measurement result X, and the standard deviation of measurement result originating in the counting error σXt. Sample vessels and measurement time shall be set so that the value X/σX at the standard limit becomes 10 or larger. Perform another measurement of an empty vessel under the conditions set above to confirm that the detection limit is equal to or below 1/5 of the standard limit. Calculate the measurement result X, σX, and the detection limit according to the method described in “Gamma-ray Spectrometry using Germanium Semiconductor Detectors” of MEXT's Radiation Measurement Method Series 7 or an internationally accepted method. - 厚生労働省