3.Configuring the DHCP serverAbout the DHCPserver DHCPサーバーについて - Gentoo Linux
Starting the DHCPserver DHCPサーバーの起動 - Gentoo Linux
Configuring the DHCPserver DHCPサーバーの設定 - Gentoo Linux
Installing the DHCPserver DHCPサーバーのインストール - Gentoo Linux
Troubleshooting the DHCPserver DHCPサーバーのトラブルシューティング - Gentoo Linux
To start the dhcpserver type: )DHCPサーバーを起動するには: - Gentoo Linux
DHCPSERVER DHCPサーバ - 特許庁
Code Listing5.1: Setting up a DHCPserver コード表示5.1:DHCPサーバの設定 - Gentoo Linux
Code Listing3.3: Installing the dhcpserver コード表示3.3:DHCPサーバーのインストール - Gentoo Linux
MULTIPLEXED DHCP (Dynamic Host Configuration Protocol) SERVER 多重化DHCP(DynamicHostConfigurationProtocol)サーバ - 特許庁
# /etc/init.d/dhcp start To add the dhcpserver to your start-up scripts type:
DHCPサーバーを起動スクリプトに追加するには: - Gentoo Linux
DHCPSERVER SYSTEM DHCPサーバシステム - 特許庁
DHCPSERVER DEVICE DHCPサーバ装置 - 特許庁
DHCP SUBSTITUTE SERVER DHCP代理サーバ - 特許庁
Code Listing3.10: Adding the dhcpserver to the master's default run level # rc-update add dhcp default
コード表示3.10:マスターのデフォルトランレベルにDHCPサーバーを追加する - Gentoo Linux
Code Listing3.9: Starting the dhcpserver on the master
コード表示3.9:マスター上のDHCPサーバーを起動する - Gentoo Linux
5.LAN Services (because we're nice people)DHCP Server LANサービス(私たちは善良な人々だから) DHCPサーバ - Gentoo Linux
Code Listing3.12: Sample dhpc server error
コード表示3.12:DHCPサーバーエラーの例 - Gentoo Linux
If you are using DHCP, dhclient(8) usually rewrites resolv.conf with information received from the DHCPserver.
DHCP を利用している場合、dhclient(8) は通常 resolv.conf を DHCP サーバから受け取っ た情報で書き換えます。 - FreeBSD
There is only one configuration file you will have to edit before starting the DHCP server: /etc/dhcp/dhcpd.conf. DHCPサーバーを起動する前に編集しなければならないファイルは一つだけです:/etc/dhcp/dhcpd.conf。 - Gentoo Linux
DHCP is a means of obtaining network information (IP address, DNS servers,Gateway, etc) from a DHCPserver.
DHCPは、DHCPサーバからネットワーク情報(IPアドレス、DNSサーバ、ゲートウェイ、その他)を取得する手段です。 - Gentoo Linux
The primary purpose of the DHCPserver is to assign IP addresses. DHCPサーバーの主な目的は、IPアドレスを割り当てることです。 - Gentoo Linux
The DHCP substitute server 2 is disposed between the DHCPserver 1 and the DHCP client 3. DHCPサーバ1とDHCPクライアント3との間にDHCP代理サーバ2を配置する。 - 特許庁
For dhcpd, just run emerge dhcp (or any other DHCPserver of your choice). Make sure that the correct interface is selected in /etc/conf.d/dhcpd, and configure it for your basic needs. では、DHCPをemergeして必要な基本設定を行いましょう。 - Gentoo Linux
METHOD FOR SUPERVISING DHCPSERVER DHCPサーバを監視する方法 - 特許庁
REMOTE ACCESS SERVER APPARATUS AND DHCPSERVER APPARATUS リモートアクセスサーバ装置およびDHCPサーバ装置 - 特許庁
The DHCPserver is the first computer the slaves will communicate with when they PXE boot. DHCPサーバーは、スレーブがPXEブートで、最初に通信するコンピュータです。 - Gentoo Linux
When a DHCPserver #2 assigns an IP address A to a certain client computer, then a failure occurs in the DHCPserver #2 and the DHCPserver #2 is put into a communication-unabled state with the other DHCPserver, the DHCPserver #2 is disconnected from a logical ring configured of a plurality of DHCP servers. DHCPサーバ#2が、あるクライアントコンピュータに対してIPアドレスAを割り当てた後、障害が発生し、他のDHCPサーバと連絡不能に陥り、複数のDHCPサーバで構成される論理的リングから外れる。 - 特許庁
The DHCPserver can assign IP addresses based on hosts ethernet MAC addresses. DHCPサーバーは、MACアドレスに基づいてIPアドレスを割り当てることができます。 - Gentoo Linux
Thus we turn to a full-featured DHCPserver as provided by the ISC folks. ISCが提供する完全な機能を持ったDHCPサーバに切り替えます。 - Gentoo Linux
DHCPSERVER, METHOD FOR MANAGING IP ADDRESS, AND SERVER PROGRAM DHCPサーバー、IPアドレスの管理方法、サーバープログラム - 特許庁
DNS SERVER, DHCPSERVER, TERMINAL AND COMMUNICATION SYSTEM DNSサーバ、DHCPサーバ、端末および通信システム - 特許庁
A DHCPserver #0 performs the reassignment of an IP address instead of the DHCPserver #2. DHCPサーバ#0は、DHCPサーバ#2の代わりにIPアドレスの再割り当てを行う。 - 特許庁
DHCP OPERATION SYSTEM AND METHOD, AND DHCPSERVER DHCP運用システム、DHCP運用方法およびDHCPサーバ - 特許庁
A DHCPserver 22 selects one IP address out of plural IP addresses. DHCPサーバ22は、1つ以上のIPアドレスの中から1つのIPアドレスを選択する。 - 特許庁
LOAD SHARING METHOD AND DHCPSERVER DEVICE 負荷分散方法およびDHCPサーバ装置 - 特許庁
When an MN performs roaming, an IP address is allocated by a DHCPserver, and an x-HA logs in. MNがローミングする時、DHCPサーバによりIPアドレスが割り当てられ、x−HAにログインする。 - 特許庁
Also forcing the kernel to browse the network for a dhcpserver. TFTPサーバーを起動するには、次のようにします: - Gentoo Linux
In a network system comprising at least a DHCPserver 101 and a DHCP client 102, the DHCPserver 101 stops supply of power to a PHY section 121 of a LAN adaptor 111 directly connected to the DHCP client 102 and supplies the power again to the PHY section 121 after a lapse of a prescribed time when network information is revised. 少なくともDHCPサーバ101とDHCPクライアント102とにより構成されるネットワークシステムにおいて、DHCPサーバ101は、ネットワーク情報が変更された場合、DHCPクライアント102と直接接続されているLANアダプタ111のPHY部121への電源供給をオフし、所定時間経過後、オンさせる。 - 特許庁
# emerge dhcp If your network already has a DHCPserver installed you will have to edit the configuration file to get the PXE boot to function correctly. もし、DHCPサーバーのインストールが済んでいるなら、PXEブートが正しく機能するように設定ファイルを編集します。 - Gentoo Linux
This only works if you have a DHCPserver in your network (or if your provider provides a DHCPservice). これはDHCPサーバーがネットワーク内に存在する場合にのみ動きます(または、プロバイダがDHCPサービスを提供している場合)。 - Gentoo Linux
A B4 device 10 receives a DHCP-PD packet from a DHCP-PD server 20 by transmitting a DHCP request to the DHCP-PD server 20. B4装置10は、DHCP要求をDHCP−PDサーバ20に送信することにより、DHCP−PDサーバ20から、DHCP−PDパケットを受信する。 - 特許庁
ADDRESS MANAGEMENT METHOD IN PLURALITY OF DHCP SERVERS, DHCPSERVER, AND PROGRAM 複数のDHCPサーバにおけるアドレス管理方法、DHCPサーバ及びプログラム - 特許庁
When an MN (mobile node) performs roaming, an IP address is allocated by a DHCPserver, and an x-HA (external home agent) logs in. MNがローミングする時、DHCPサーバによりIPアドレスが割り当てられ、x−HAにログインする。 - 特許庁
The DHCPserver 2 deletes the DHCP information at the designated allocation position. DHCPサーバ2は、指示された収容位置のDHCP情報を削除する。 - 特許庁
Since we're using dnsmasq for our DHCPserver, and it includes a DNS server,you've got nothing left to do here!
DHCPサーバにdnsmasqを使用しており、これにはDNSサーバが含まれているので、ここで行うことは何もありません。 - Gentoo Linux
DHCP CLIENT/SERVER DEVICE AND METHOD OF PROVIDING DHCPSERVER SERVICE ON NETWORK ネットワーク上においてDHCPサーバーサービスを提供するDHCPクライアント/サーバーデバイスおよび方法 - 特許庁