「INTER」を含む例文一覧(8763)

<前へ 1 2 .... 137 138 139 140 141 142 143 144 145 .... 175 176 次へ>
  • The FATF remains concerned by Sao Tome and Principe's failure to meaningfully address the deficiencies in its AML/CFT regime, particularly relating to terrorist financing, and its recent lack of engagement with the Inter-Governmental Action Group against Money Laundering in West Africa (GIABA).
    FATFは、サントメ・プリンシペが、同国の資金洗浄・テロ資金供与対策体制、特にテロ資金供与対策に関する欠陥に十分な対応をとっていないこと、及び近時のGIABA(西アフリカのFATF型地域体)との連携の欠如を、引き続き懸念している。 - 財務省
  • In addition, Japan has been making a large contribution to regional development initiatives: this includes Japan’s leading role in the establishment of the Asian Development Bank (ADB) in 1966, and accession to the membership in the Inter-American Development Bank (IDB) in 1976 and in the African Development Bank (AfDB) in 1983.
    また、世界の各地域における開発に関しても、我が国は1966年にアジア開発銀行(ADB)の設立を主導するとともに、1976年に米州開発銀行(IDB)、1983年にアフリカ開発銀行(AfDB)に加盟するなど、大きな貢献を行ってきました。 - 財務省
  • We also support further actions to enhance the transparency of IMF surveillance through, inter alia, more general use of Public Information Notices following Article IV consultations and Reports on the Observance of Standards and Codes (ROSCs).
    我々は、また、特に4条協議後のパブリック・インフォメーション・ノーティス(PIN)のより一般的な利用、国際基準の遵守状況に関する報告書(ROSCs)を通じ、IMFのサーベイランスの透明性を高めるための更なる行動についても支持する。 - 財務省
  • When inter-image coding processing is performed, reference image signals S11 are successively written into an image memory 112 via a switch 111, and compensation of the motion of the image is performed by using the reference image S11 and an input image S10 as with a normal case.
    画像間符号化処理を行う場合には、スイッチ111を介して参照画像信号S11を画像メモリ112に順次書込み、この参照画像S11と入力画像S10を使った画像の動き補償を通常通り行う。 - 特許庁
  • To provide an inter-layer deviation prevention tool for an oil-immersed paper capacitor core, and an oil-immersed paper capacitor bushing that, even when a center conductor with a capacitor core having been wound therearound is set perpendicular, can easily and securely prevented the center conductor from being detached and fallen from between layers.
    コンデンサコアの巻き付けを終了した中心導体を垂直とした場合にも、層間のずれ落ちを簡単かつ確実に防止することができる油浸紙コンデンサコア用層間ずれ防止具及び油浸紙コンデンサブッシングを提供する。 - 特許庁
  • To provide an optical phase detection apparatus capable of detecting an inter-bit phase state of a carrier of a modulation optical signal, an optical phase control apparatus for controlling a carrier phase on the basis of phase detection information of the carrier, and an optical transmission apparatus.
    変調光信号のキャリアのビット間位相状態を検知できる光位相検知装置と、キャリアの位相検知情報に基づいてキャリア位相を制御するキャリア位相を制御する光位相制御装置及び光送信装置を提供する。 - 特許庁
  • A laser radar system is equipped with a radar signal processing/control part for controlling an axis adjusting mechanism for scanning the emission direction of the laser light to right and left directions and the vertical direction and calculating the inter-vehicle distance from the time difference between emission and reception of the laser light.
    レーザレーダシステムは、レーザ光の出射方向を左右方向および垂直方向に走査する軸調整機構を制御し、レーザ光の出射と受光の時間差から車間距離を算出するレーダ信号処理・制御部を備える。 - 特許庁
  • Further, the layout design of the mask patterns of the ROM module is executed so that the file name of the data file with the stored data recorded thereon can be visibly engraved on the inter-layer oxide film provided with a contact hole for determining the data value of the ROM module.
    更に、ROMモジュールのデータ値を決定づけるコンタクトホールが設けられる層間酸化膜に、格納データが記録されたデータファイルのファイル名が視認可能な態様で刻み込まれるように、ROMモジュールのマスクパターンのレイアウト設計を行う。 - 特許庁
  • To provide a star-delta starter prevented in an inter-phase short circuit caused by the simultaneous start of a star electromagnetic contactor and a delta electromagnetic contactor even if a power supply voltage is lowered during delta operation when performing the changeover of a star delta by using a changeover switch.
    スターデルタの切換を切換スイッチで行う際に、デルタ運転中に電源電圧の低下が生じてもスター用電磁接触器とデルタ用電磁接触器が同時投入による相間短絡を防止したスターデルタ始動装置を提供する。 - 特許庁
  • To realize a master disk aligner which can suppress vibration during rotation by eliminating the off-centering of a master resist disk, can prevent the axial deflection of a turntable and makes high-accuracy inter-track pitch obtainable with a relatively simple apparatus and by a simple process.
    レジスト原盤の偏芯を除去して回転時の振動を抑えると共に、ターンテーブルの軸ぶれを防止し、高精度なトラックピッチ間隔を得ることができる原盤露光装置を、比較的簡単な装置と単純な工程により実現する。 - 特許庁
  • The engine 30 is of a rear intake and front exhausting type, a centrifugal type turbo charger 44 has an exhaust turbine 72 arranged at the DPF container 46 and a compressor 56 arranged at a side opposite to a vehicle width direction, and an inter-cooler 58 is arranged at a side of the compressor 56.
    エンジン30は後方吸気、前方排気方式であり、遠心型のターボチャージャー44は、排気タービン72がDPF容器46側に、これとは車幅方向反対側にコンプレッサー56が配設されており、インタークーラー58がコンプレッサー56側に配設されている。 - 特許庁
  • An inter-electrode distance adjustment unit includes: a first connector 260a connected to a first electrode 220a; a second connector 260b connected to a second electrode 220b; and a first shaft pin 262a connecting the first and second connectors 260a and 260b to each other.
    電極間距離調節ユニットは第1電極220aに連結された第1コネクター260aと第2電極220bに連結された第2コネクター260b、第1及び第2コネクター260a,260bを連結される第1軸ピン262aを含む。 - 特許庁
  • To provide a digital cordless phone where slave units can make inter- slave-unit direct speech and extension speech at the same time without the need for revising an existing master unit and for a mode revision instruction from the master unit.
    既存の親機に変更を加えることなく、また親機からのモード変更指示を必要とすることなく、複数の子機間で同時に子機間直接通話や内線通話を行うことができるデジタルコードレス電話装置を提供することを目的とする。 - 特許庁
  • Then, an inter-bit interference extraction test for the semiconductor memory loaded on the memory module can be performed based on the mat information.
    メモリモジュール製造時にメモリモジュールのSPDに半導体メモリのマット情報を記録し、装置でのメモリ試験でSPDに記録したマット情報を読み出し、このマット情報は、メモリモジュールに搭載された半導体メモリ用のビット間干渉摘出試験を実施する。 - 特許庁
  • Based on the output signal from a laser radar sensor 14 arranged near the front grill of the vehicle, the inter-vehicle distance d between a vehicle running in a specified range ahead of a datum vehicle and the datum vehicle is detected for detecting a relative vehicle speed Rxy.
    車両のフロントグリル近傍に配設されたレーザレーダセンサ14の出力信号に基づいて、自車両の前方の所定領域内に存在する前方車両と自車両との車間距離dを検出し、相対速度Rxyを検出する。 - 特許庁
  • To easily obtain an enlarged copy without generating jaggy, to reduce data volume to be dealed with and to easily execute data transmission utilizing a communication means such as an inter-connection network (internet).
    ジャギーの発生なしに拡大した複製が容易に得られ、しかも取り扱うデータ量も少なく、インターネット等の通信手段を利用したデータ伝送が容易できる、画像データ作成方法、原画復元方法及びそれらの装置を提供するにある。 - 特許庁
  • The current injection device 32 injects an inter-order harmonic current, in the order of non integral number of times of the fundamental wave synchronized with the fundamental wave voltage of a power distribution system to a drop point A into a consume facility 14, having the distributed power supplies 30.
    電流注入装置32は、分散電源30を有する需要家設備14への引込点Aに、当該配電系統の基本波電圧に同期しており、かつ当該基本波の非整数倍次数の次数間高調波電流を注入する。 - 特許庁
  • A bit line contact hole is also opened in a process where a capacitor forming area is opened in a second inter layer insulating film 19, and a conductor buried in the contact hole is used as a contact plug when forming a storage node electrode and a plate electrode later.
    第2層間絶縁膜19にキャパシタ形成領域を開口する工程においてビット線コンタクトホールも開口し、その後のストレージノード電極およびプレート電極形成時に先のコンタクトホール内に埋め込まれた導体をコンタクトプラグとして用いる。 - 特許庁
  • To provide a power generation controller of a vehicle generator in which a constant creeping distance can be ensured even when a control IC with a narrow terminal spacing is mounted, and occurrence of inter-terminal leak and faults incident thereto can be prevented.
    端子間隔が狭い制御ICを搭載する場合であっても一定の沿面距離を確保することができ、端子間リークやこれに伴う不具合の発生を防止することができる車両用発電機の発電制御装置を提供すること。 - 特許庁
  • The inter-wire waterproofing jig 16 is provided with a holding part 18 having storing spaces 17, 18 arranged in parallel which can store wires 15 put in a row, and nozzle holes 17a, 18a injecting seal adhesive (not shown in a figure) toward the storing spaces 17, 18.
    電線15を1列に並べて収納可能な並列された収納空間17、18を有する保持部18と、保持部19に設けられ、図示しないシール剤を収納空間17、18に向かって噴射するノズル孔17a、18aとを備えた電線間防水治具16を設けた。 - 特許庁
  • A lower end part of a capacitor core 2 is formed in steps, and the inter-layer deviation prevention tool is mounted which comprises a plurality of ring-shaped members 3 receiving lower surfaces of the steps of the capacitor core 2 and columnar members 4 arranged between the ring-shaped members 3.
    コンデンサコア2の下端部を多段状に形成し、コンデンサコア2の段部下面を受ける複数のリング状部材3と、これらのリング状部材3の間に配置された柱状部材4とからなる層間ずれ防止具を装着する。 - 特許庁
  • When the game card is purchased, after the portable telephone K is brought close to either an inter-stand machine 12 or a card selling machine 16 and the identification information of the portable telephone K is made to be read, the password is transmitted to a system controlling apparatus 21 from the portable telephone K.
    遊技カードを購入する際には、台間機12またはカード販売機16に携帯電話機Kを近づけて、携帯電話機Kの識別情報を読み取らせた後、携帯電話機Kからシステム管理装置21に暗証番号を送信する。 - 特許庁
  • In a system where a receiving side has a command interface which shifts an inter-chip interface to a power saving state, when data transfer is completed, a command to shift a receiving-side interface to a low power consumption state is transmitted in the data transfer completion.
    受信側がチップ間インターフェースを省電力状態に移行させるコマンドインターフェースを持つシステムで、データ転送完了時に受信側インターフェースを低消費電力状態に移行させるコマンドをデータ転送完了時に送信する。 - 特許庁
  • To provide a mutually connecting structure for two printed circuit boards arranged at a certain spacing at a low manufacturing cost, assuring automatic installation and capable of establishing the connection even with varying inter-board distance.
    所定の間隔を置いて配置した2枚のプリント基板を電気的に接続する構造であって、製作コストが安く、しかも自動組み付けが出来、又プリント基板間距離が変化しても接続可能なプリント基板の相互間接続構造の提供。 - 特許庁
  • A recording/reproducing device A is provided with an input part 1, a broadcast receipt part 3 connected to an antenna 5, a control part 7, a content storage part 17, an inter-content information storage part 21, a presentation content decision part 11, an output part 15, and a display part 23.
    記録再生装置Aは、入力部1と、アンテナ5に接続される放送受信部3と、制御部7と、コンテンツ蓄積部17と、コンテンツ間情報蓄積部21と、提示コンテンツ決定部11と、出力部15と、表示部23と、を有している。 - 特許庁
  • At this time, the projected core parts of the rotor 3 are jointed through the ring member 5, so that the strength of this part against centrifugal force can be ensured even when the thickness of the ring member 5 corresponding to an inter-pole bridge part is made small as compared with the conventional one.
    これにより、回転子3の突出した各鉄心部分はリング部材5を介して連結されることにもなり、従来に比して磁極間ブリッジ部に相当するリング部材厚さを薄くしてもこの部分の耐遠心力強度は確保される。 - 特許庁
  • Between a scan line 2 and a signal line 3 at the crossing part of an almost L-shaped plane of both the lines 2 and 3, a gate insulating film 12, intrinsic amorphous silicon layer 21, inter-line insulating film 22 composed of a silicon nitride and n+ silicon layer 23 are provided in this order.
    走査線2と信号線3との平面ほぼL字状の交差部における両線2、3間には、ゲート絶縁膜12、真性アモルファスシリコン層21、窒化シリコンからなる線間絶縁膜22及びn^+シリコン層23がこの順で設けられている。 - 特許庁
  • To provide a device and a method for calculating inter-vector distance, a program and a recording medium which classify a document into a corresponding one of a predetermined genres at a high speed.
    文書を、あらかじめ定めたジャンル群の内の該当するジャンルに分類する文書分類を高速に行うことを可能とするベクトル間距離算出装置、ベクトル間距離算出方法、プログラム及び記録媒体を提供することを目的とする。 - 特許庁
  • Notch circuits Nc11 and Nc12 constituted of the serial coupling capacitors C1 and C2 and the inductors L11 and L12 are serially connected through the inter-stage coupling capacitor Cc, and an attenuation pole due to the serial resonance of the notch circuits Nc11 and Nc12 is indicated.
    直列結合コンデンサC1,C2とインダクタL11,L12とからなるノッチ回路Nc11,Nc12は段間結合コンデンサCcで縦続接続されており、ノッチ回路Nc11,Nc12の直列共振による減衰極を示す。 - 特許庁
  • Relay servers 21 and 22 are respectively connected to internal networks 11 and 12, and communication between those respective internal networks is limited to inter-relay server cooperation means 213 and 223 so that the existence of information servers 31 and 32 connected to the internal networks can be concealed.
    内部ネットワーク11,12ごとに中継サーバ21,22を接続し、各内部ネットワーク間の通信を中継サーバ間連携手段213,223に限定することで、内部ネットワークに接続された情報サーバ31,32の存在を隠蔽する。 - 特許庁
  • This traveling controller acquires a traffic state including a vehicle density of a road on which a vehicle travelings (S16), and performs traveling control of the vehicle such that an inter-vehicle distance becomes difficult to be shorten as the vehicle density of the road approaches to a critical density (S18, S22, S26).
    車両が走行する道路の車両密度を含む交通状態を取得し(S16)、道路の車両密度が臨界密度に近づくほど車間距離が短くなりにくくなるように車両の走行制御を行う(S18、S22,S26)。 - 特許庁
  • A pattern P particularly adapted to the speed of image formation and a pattern elongated in the sub-scanning direction so that precise measurement of the positional shift amount is allowed (preferably, a pattern in which the pattern P is repeated a plurality of times) are used as the two types for the inter-color registration correction pattern.
    色間レジ補正パターンには、画像形成の速度を特に重視したパターンPと、正確に位置ズレ量を測定ができるよう副走査方向に長いパターン(好適には、パターンPを複数回繰り返したパターン)と、の2種類を用いる。 - 特許庁
  • The inter-connector 15 is provided with an airtight-emphasized portion 15a consisting of a material having a composition formula: Sr_1-3x/2La_xTi_1+yO_3-δ and a conductivity serious-consideration portion 15b having a conductivity higher than that of the airtight-emphasized portion 15a.
    インターコネクタ15は、組成式:Sr_1−3x/2La_xTi_1+yO_3−δを有する材料からなる気密性重視部分15aと、気密性重視部分15aよりも導電率が高い導電率重視部分15bとを備えている。 - 特許庁
  • To easily realize a communication method which enables keeping security protection, through the installation of a computer within an intranet utilizing an existing facility constructed over the internet and a communication technology, in constructing inter-system communication by utilizing internet communication.
    インターネット通信を利用してシステム間通信を構築する場合に、インターネット上に構築されている既存の設備や通信技術を利用して、コンピュータをイントラネット内に設置して機密保持を保つことができる通信方式を簡単に実現する。 - 特許庁
  • The semiconductor device for electric power in an embodiment includes a p-type collector layer 1, an n-type base layer 3, a p-type base layer 4, an n-type source layer 5, a gate electrode 8, an inter-layer insulating film 9, a collector electrode 11, and an emitter electrode 12.
    実施形態の電力用半導体装置は、p形コレクタ層1と、n形ベース層3と、p形ベース層4と、n形ソース層5と、ゲート電極8と、層間絶縁膜9と、コレクタ電極11と、エミッタ電極12と、を備える。 - 特許庁
  • To provide a traveling support system and traveling support device of a vehicle which can appropriately support inter-vehicle operation judgement at an intersection or the junction of a Y-shaped road or the like and can suitably prevent the occurrence of the contact accident of the vehicles or the like.
    交差点やY字路等の交差路での車両間の運行判断を適正に支援してそれら車両間の接触事故等の発生を好適に予防することのできる車両の走行支援システムおよび走行支援装置を提供する。 - 特許庁
  • Inter-processor communication is used as penalty, and the result of the combination of the processor and the task for preventing penalty most is adopted so that it is possible to realize the consistency of the whole system between the data cache and the shared memory while using the most efficient processing procedure.
    プロセッサ間での通信をペナルティとして、最もペナルティを避けたプロセッサとタスクの組合せの結果を採用することで、最も効率の良い処理手順を使いつつ、データキャッシュ−共有メモリ間のシステム全体の整合性をとる。 - 特許庁
  • The electronic stringed instrument has a plurality (four) of sounding indication trigger means 10 for indicating sounding on a body 1 and also has inter-fret operators (pitch specifying means) 20 arrayed in columns corresponding to the respective sounding indicating means.
    電子弦楽器は、ボディ1において発音指示を行う複数(4つ)の発音指示トリガ手段10を有し、ネック2において前記各発音指示手段に対応する列状に配列されたフレット間操作子(音高指定手段)20を有する。 - 特許庁
  • This address conversion circuit 100 performs address conversion from a logical address into a physical address only one time in response to one vector instruction to generate a physical base address, and subsequently, sequentially adds an inter-element distance to the physical base address to sequentially generate physical addresses.
    アドレス変換回路100は、1つのベクトル命令に対し論理アドレスから物理アドレスへのアドレス変換を1回のみ行い物理ベースアドレスを生成し、その後、前記物理ベースアドレスに要素間距離を順次加算し、物理アドレスを順次生成する。 - 特許庁
  • To improve the precision of the width of an inter-digital electrode, especially, at the boundary of divisional exposure and to improve the reliability of a lateral electric field system while reducing display unevenness at the border of the divisional exposure.
    櫛形電極の幅の精度を面内、特に分割露光の境界で上げて、横方向電界方式において、この分割露光の境界部の表示ムラを低減しながら信頼性の高い液晶表示装置およびその製造方法を提供する。 - 特許庁
  • The above decision is made on the basis of presence/no presence of excess of speed, rapid deceleration, long continuous driving, inter-vehicle distance of a predetermined value or less, the operation of an ABS, the operation of a vehicle attitude stability controller, the operation of automatic brake controller and lowering of arousal.
    判定は、例えば、速度超過、急減速、長時間の連続運転、所定値以下の車間距離、ABSの作動、車両姿勢安定制御装置の作動、自動制動制御装置の作動、覚醒度の低下のいずれかの有無を判定する。 - 特許庁
  • When it is determined that at each of S16 to S19, the inter MB is selected, MB type is not present, the skip MB can be set, and the differential vector is within the threshold, the skip MB is set (S20); otherwise the skip MB is not set.
    S16〜S19でそれぞれインターMBが選択され、MBタイプが存在せず、スキップMBが設定可能で、差分ベクトルが閾値以内であると判断された場合には、スキップMBに設定し(S20)、それ以外ではスキップMBに設定しない。 - 特許庁
  • The base station unit of its own station is provided with a search function that searches for a synchronous channel sent from a base station unit of another cell and a base station unit of another private system so as to autonomously conduct inter-base-station synchronization, scrambling code assignment and frequency assignment.
    自局の基地局装置に他セルの基地局装置や他の自営システムの基地局装置から送信される同期チャネルに対してサーチ機能を設け、自律的に基地局間同期、スクランブリングコード割当てや周波数割当てを行う。 - 特許庁
  • To provide a multi-beam optical scanning apparatus, which is capable of reducing an inter-light-beam illuminance difference at the same image height on a surface to be scanned and forming a high-definition and high-quality image where no unevenness in density of image exists, and an image forming apparatus using the multi-beam optical scanning apparatus.
    被走査面上における同じ像高での複数ビーム間の照度差を低減し、濃度ムラのない高精細で高画質な画像を形成できるマルチビーム光走査装置及びそれを用いた画像形成装置を得ること。 - 特許庁
  • The test circuit 1 has output switches 4_1-4_n which are switched by a controller 7 so that they are sequentially connected during a test, and inter-pads switches 6_1-6_n which are controlled by the controller 7 to connect all output pads 3_1-3_n to a test pad 5 during the test.
    この試験回路1は、試験時にコントローラ7によって順次接続するよう切り換えられる出力スイッチ4_1〜4_nと、試験時にコントローラ7によってすべての出力パッド3_1〜3_nをテストパッド5に接続するパッド間スイッチ6_1〜6_nとを有する。 - 特許庁
  • To provide an inter-layer insulating film and a radiation-sensitive resin composition suitable for forming a microlens, which have a high radiation-sensitive sensitivity and an excellent development margin, and with which a pattern thin film with excellent adhesion with a ground can be easily formed.
    高い感放射線感度と優れた現像マージンを有しそして下地との密着性にも優れたパターン状薄膜を容易に形成することができる、層間絶縁膜およびマイクロレンズの形成に好適な、感放射線性組成物を提供する。 - 特許庁
  • To provide a simple and highly productive method of producing a multilayered coating film having extremely excellent inter-layer adhesion, by applying a plurality of coating liquids altogether without using a gelling agent or the like for adjusting the viscosity of a coating liquid in laminating the same.
    粘度を調整して積層させるゲル化剤などを用いることなく、複数の塗工液を一括で塗布することにより、層間の密着性に極めて優れる多層塗工膜を、簡便かつ生産性良く製造する方法を提供すること。 - 特許庁
  • To provide an ALC block as an inter-molded block body to be used in manufacturing an ALC panel having a specified design, facilitating work in manufacturing a bent ALC panel, in particular, and having uniform strength.
    本発明は特定の意匠を有するALCパネルを製造する際に用いられる中間成形ブロック体であって、特に曲面ALCパネルを製造する際に加工が容易であり、かつ均一な強度を持ったALCブロックを目的とする。 - 特許庁
  • The layout design method for a semiconductor integrated circuit includes a dummy cell arrangement step (S2) of arranging a dummy cell (an inter-power-source capacity cell and a buffer cell) in a region where object wiring between a first logic cell and a second logic cell of layout data is arranged.
    半導体集積回路のレイアウト設計方法は、レイアウトデータにおける第1の論理セルと第2の論理セルの間の対象配線が配置される領域に、ダミーセル(電源間容量セル、バッファセル)を配置するダミーセル配置ステップ(S2)を含む。 - 特許庁
  • A frequency transmission band attenuation notch filter 5 with a steep characteristic to attenuate a transmission band of a transmission band to a frequency band transmission band and a reception inter-stage filter 6 for a reception image frequency band are inserted between a low noise amplifier 4 and a mixer 7.
    ローノイズアンプ4とミキサー7の間に周波数帯送信帯域に対しては送信帯域を減衰する急峻な周波数送信帯域減衰ノッチフィルター5を、受信イメージ周波数帯域に対しては受信段間フィルター6を挿入する。 - 特許庁
<前へ 1 2 .... 137 138 139 140 141 142 143 144 145 .... 175 176 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.
  • 財務省
    Copyright(C) 財務省
    ※この記事は財務省ホームページの情報を転載しております。内容には仮訳のものも含まれており、今後内容に変更がある可能性がございます。
    財務省は利用者が当ホームページの情報を用いて行う一切の行為について、何ら責任を負うものではありません。