「Internal Control」を含む例文一覧(12271)

<前へ 1 2 .... 207 208 209 210 211 212 213 214 215 .... 245 246 次へ>
  • To provide a control device of an internal combustion engine capable of restraining a driving element part from reaching its limit temperature, by predicting that the driving element part for supplying electric power to an electric oil pump reaches its limit temperature.
    電動オイルポンプに電力を供給するための駆動素子部がその限界温度に達することを予測するとともに、駆動素子部がその限界温度に達することを抑制することを可能とする内燃機関の制御装置を提供する。 - 特許庁
  • To provide a control device for an internal combustion engine capable of improving drivability and exhaust gas characteristics by suitably controlling concentration of fuel in a cylinder and stably performing combustion by self-ignition in a compression ignition combustion mode.
    圧縮着火燃焼モードにおいて、気筒内の燃料の濃度を適切に制御し、自己着火による燃焼を安定して行うことによって、ドライバビリティおよび排ガス特性を向上させることができる内燃機関の制御装置を提供する。 - 特許庁
  • In the control device of the internal combustion engine for calculating a target throttle opening by using the request torque and request efficiency, a correction part 20 is arranged to limit the request efficiency so that combustion condition in a cylinder stays within a combustion limit.
    要求トルクと要求効率とを用いて目標スロットル開度を算出する内燃機関の制御装置において、筒内の燃焼条件が燃焼限界内に収まるように、要求効率に制限を設ける修正部20を備える。 - 特許庁
  • To enable fine control of degree of stratification of gas existing in a cylinder and enable combustion satisfactorily reducing exhaust emission by using stratification of the gas in the cylinder in relation to a cylinder injection internal combustion engine.
    この発明は、筒内噴射式内燃機関に関し、筒内に存在するガスの成層度の細かな制御を可能とし、筒内のガスの成層化を利用して排気エミッションの低減を良好に図れる燃焼を可能とすることを目的とする。 - 特許庁
  • To gently control the over-speed of a multiple cylinder internal combustion engine with fuel injectors corresponding to an increase in engine speed, maintain a proper supply amount of fuel and stabilize the condition of combustion.
    燃料インジェクターを備えた多気筒内燃機関において、オーバー回転を回転数の増加に対応して穏やかに制御できるようにする共に、適正な燃料供給量を確保し、燃焼状態を安定させることを目的としている。 - 特許庁
  • To provide a control device of an engine system obtaining output by synergy between an internal combustion engine and a motor, which can effectively prevent troubles caused in respective elements by excessive torque occurring during deceleration of a vehicle or the like.
    内燃機関及びモータの協働によって出力を得るエンジンシステムにおいて、車両の減速時等において発生する余剰なトルクに起因して各要素に生じる不具合を効率的に防止することのできる制御装置を提供する。 - 特許庁
  • To provide a control device easily and accurately acquiring a catalyst warm-up index value representing the degree of progress of a catalyst warming up condition and appropriately controlling an internal combustion engine based on the catalyst warm-up index value.
    触媒の暖機状態の進行程度を示す触媒暖機指標値を簡単に且つ精度良く取得することができ、更に、その触媒暖機指標値に基づいて内燃機関を適切に制御することができる制御装置を提供すること。 - 特許庁
  • This internal combustion engine has a fuel injection valve 4 jetting fuel into an intake port; and a tumble control valve 11 producing tumble flow inside a combustion chamber, and fuel is jetted and supplied from an exhaust process final stage to an intake process initial stage.
    吸気ポートに燃料を噴射する燃料噴射弁4と、燃焼室内にタンブル流を生起するタンブル制御弁11とを備えた内燃機関において、排気行程末期から吸気行程初期にかけて燃料を噴射供給する。 - 特許庁
  • To provide a valve timing control device for an internal combustion engine capable of generating an optimum rate of fuel consumption in any running condition and of avoiding the combustion becoming unstable in particular in a low-load operation.
    この発明は、どんな走行条件においても、最良の燃料消費量とすることが可能であり、特に、低負荷時において燃焼が不安定になるのを避けることが可能な内燃機関のバルブタイミング制御装置を実現することを目的とする。 - 特許庁
  • To provide a control device for an internal combustion engine suppressing sintering of precious metal catalyst in a three way conversion catalytic device arranged in an engine exhaust system and sufficiently suppressing oil rise in a cylinder and oil drop.
    フューエルカット時において、機関排気系に配置された三元触媒装置における貴金属触媒のシンタリングを抑制すると共に、気筒内でのオイル上がり及びオイル下がりも十分に抑制することができる内燃機関の制御装置を提供する。 - 特許庁
  • The control system for a cylinder direct injection type spark ignition internal combustion engine includes an injector for cylinder injection that injects fuel in a direction to increase tumbles in a combustion chamber formed with tumbles with air taken into the combustion chamber.
    筒内直接噴射火花点火式内燃機関の制御システムは、燃焼室に吸入される空気でタンブルが形成された燃焼室内において、タンブルを強化する方向に燃料を噴射する筒内噴射用のインジェクタを備える。 - 特許庁
  • To provide technology capable of inhibiting dilution of lubricating oil while inhibiting increase of combustion noise in a fuel injection control system for an internal combustion engine provided with a fuel injection valve capable of injecting fuel directly into a cylinder.
    本発明は、気筒内へ直接燃料を噴射可能な燃料噴射弁を備えた内燃機関の燃料噴射制御システムにおいて、燃焼騒音の増加を抑制しつつ潤滑油の希釈を抑制可能な技術の提供を課題とする。 - 特許庁
  • To provide a control device of an internal combustion engine capable of maintaining an engine rotational speed in a stable state even when a combustion mode is switched from a stratified combustion mode to a uniform combustion mode during the feedback operation of the engine rotational speed at idle.
    アイドル運転での機関回転数のフィードバック制御中、燃焼モードを成層燃焼モードから均一燃焼モードに切り換えたときでも、機関回転数を安定した状態に維持できる内燃機関の制御装置を提供する。 - 特許庁
  • To provide an EGR control device of an internal combustion engine capable of improving an exhaust gas characteristic, and capable of restraining a combustion sound, by properly controlling EGR, by setting the target EGR ratio in response to an actual combustion state.
    実際の燃焼状態に応じて目標EGR率を設定することによって、EGRを適切に制御でき、それにより、排ガス特性の向上や燃焼音の抑制を実現することができる内燃機関のEGR制御装置を提供する。 - 特許庁
  • To improve catalyst deterioration suppression effect by slowing progress of oxidation condition of a catalyst at a time of execution of fuel cut while avoiding fixing of a throttle valve in relation to a control device for an internal combustion engine.
    この発明は、内燃機関の制御装置に関し、スロットルバルブの固着を回避しつつ、燃料カット実行時に触媒の酸化状態が進行するのを遅らせることができ、これにより、触媒の劣化抑制効果をより向上させることを目的とする。 - 特許庁
  • To provide a control device of an internal combustion engine capable of suppressing deterioration of torque fluctuation on the contrary when adjusting an EGR (exhaust gas recirculation) gas supply quantity to suppress the torque fluctuation.
    この発明は、トルク変動を抑制するためにEGRガス供給量の調節を行う際にトルク変動が却って悪化してしまう事態が発生するのを抑制することができる内燃機関の制御装置を提供することを目的とする。 - 特許庁
  • To successfully ensure engine brake force when an exhaust valve is operated while stopping an intake valve in a valve closing state during deceleration with fuel cut, in a control device for an internal combustion engine with a supercharger.
    この発明は、過給機付き内燃機関の制御装置に関し、フューエルカットを伴う減速時に吸気弁を閉弁状態で停止させつつ排気弁を稼働状態とした際に、エンジンブレーキ力を良好に確保できるようにすることを目的とする。 - 特許庁
  • To satisfactorily materialize improvement of combustion and improvement of fuel economy by effectively inhibiting contraction of turbulence of in-cylinder gas at an early stage in relation to a control device for an internal combustion engine provided with a variable valve mechanism.
    この発明は、可変動弁機構を備える内燃機関の制御装置に関し、筒内ガスの乱れが早期に縮流するのを効果的に抑制でき、これにより、燃焼の改善、ひいては燃費の改善を良好に実現させることを目的とする。 - 特許庁
  • A piston temperature controller for the cylinder injection type internal combustion engine provided with the piston cooling means is provided with a control means for stopping cooling by the piston cooling means temporarily in a piston cooling region when normal operation is performed.
    ピストン冷却手段を備えた筒内噴射式内燃機関のピストン温度制御装置において、通常運転時のピストン冷却領域内で一時的に該ピストン冷却手段による冷却を停止する制御手段を設けたことを特徴とする。 - 特許庁
  • To provide a control device of an internal combustion engine capable of improving exhaust gas characteristics and drivability by securing stable air-fuel ratio and combustion state in a stratified combustion mode and in switching a combustion mode.
    成層燃焼モード中および燃焼モードの切換時において、安定した空燃比と燃焼状態を確保することができ、それにより、排気ガス特性およびドライバビリティを向上させることができる内燃機関の制御装置を提供する。 - 特許庁
  • To provide a control device for a compression ignition type multi-cylinder internal combustion engine appropriately controlling combustion conditions in all cylinders based on detection results of a combustion condition in a specific cylinder and providing good engine output.
    特定の気筒における燃焼状態の検出結果に基づいて全気筒における燃焼状態を適正に制御し、良好な機関出力を得ることのできる圧縮着火式の多気筒内燃機関の制御装置を提供する。 - 特許庁
  • To satisfactorily inhibit deterioration of catalyst caused by execution of fuel cut by effectively reducing the temperature of a catalyst before execution of fuel cut in a control device for an internal combustion engine.
    この発明は、内燃機関の制御装置に関し、燃料カットの実施に先立ち触媒の温度を効果的に低下させることができ、これにより、燃料カットの実施に起因して触媒が劣化するのを良好に抑制することを目的とする。 - 特許庁
  • To provide a combustion controller for a compression-ignition direct-injection engine and an engine control system, which improve combustion characteristics of the internal combustion engine, especially combustion characteristics relating to main ignition timing of main fuel supplied by main injection.
    内燃機関の燃焼特性、特にメイン噴射により供給されたメイン燃料のメイン着火時期に関する燃焼特性を改善することのできる圧縮着火式筒内噴射エンジンの燃焼制御装置及びエンジン制御システムを提供する。 - 特許庁
  • With regard to the full enforcement of the Financial Instruments and Exchange Act and the implementation of rules concerning internal control that you mentioned, we have released a Q&A collection and the like, believing that it is important to correct misinterpretations and misunderstandings.
    例示をいただいた金商法の全面施行であるとか内部統制ルールの実施については、実態を踏まえて、行き過ぎた解釈や誤解を解くことが重要だということで、Q&Aのようなものを発表させていただいたわけです。 - 金融庁
  • 2. The main office of the firm did not properly monitor whether or not the local offices appropriately assumed the firm's internal procedures concerning the acceptance and continuance of audit engagements. The main office did not request the local offices to report the results of the ongoing evaluation of the quality control system conducted by them either.
    ・ 品質管理のシステムの運用状況を把握するための具体的な措置が講じられていないことなどから、地方事務所における監査契約の締結状況、品質管理のシステムの監視結果等の把握が不十分である。 - 金融庁
  • Therefore, when designing and operating internal control, organizations should, based on a full understanding of the characteristics of the IT-based information systems, undertake preparations in an orderly manner, and, at the same time, consider how incidents could be examined appropriately after the fact.
    したがって、内部統制の整備及び運用に当たっては、ITを利用した情報システムの特性を十分に理解し、予め計画的に準備を進めるとともに、適切な事後の検証方法等について検討しておく必要がある。 - 金融庁
  • ・ Is the information on control deficiencies obtained through the monitoring activities appropriately reported to senior managers involved in such activities and persons who are responsible for managing such activities and relevant internal controls and taking remedial actions?
    ・モニタリングによって得られた内部統制の不備に関する情報は、当該実施過程に係る上位の管理者並びに当該実施過程及び関連する内部統制を管理し是正措置を実施すべき地位にある者に適切に報告されているか。 - 金融庁
  • External auditors should understand the process of the management’s determination of significant locations/business units to be included in the scope of assessment, and review whether the management has adequately selected significant locations or business units based on Chapter II, “Assessment and Report on Internal Control Over Financial Reporting.”
    監査人は、経営者が評価対象とする重要な事業拠点の決定過程を理解し、経営者が重要な事業拠点を「Ⅱ 財務報告に係る内部統制の評価及び報告」に照らして、適切に選定しているか確認する。 - 金融庁
  • ・ The process of developing, procuring or modifying the new system or software should be appropriately recorded and retained. In the case of modification, records on the status of internal control design over the old system or software must be updated.
    ・新たなシステム、ソフトウェアの開発、調達又は変更について、その過程が適切に記録及び保存されるとともに、変更の場合には、変更前のシステム、ソフトウェアに関する内部統制の整備状況に係る記録が更新されていること - 金融庁
  • In addition, from the perspective of further improving the efficiency and effectiveness of inspections, it is necessary to conduct inspections focused more on the quality of the internal control system, while ensuring fair trade and the protection of the interests of the public and investors.
    そして、証券検査の効率性と実効性の一層の向上を図る観点から、取引の公正確保を基本としつつ、公益の確保や投資者保護をも念頭に、内部管理態勢に着目した検査も一層充実させていく必要がある。 - 金融庁
  • In a group-wide inspection focused on intra-group transactions, the SESC will verify the quality of the internal control function, regarding the handling of customer information and the management of conflicts of interest.
    同一のグループ内の金融商品取引業者等に対して実施するグループ一体型検査におけるグループ内取引の検証に際しては、顧客情報の取扱いや利益相反取引の防止など、内部管理態勢の状況にかかる検証を行う。 - 金融庁
  • c. The foreign securities company must be staffed and organized so that it can execute business operations appropriately, including having personnel necessary for conducting transaction-at-exchange operations in an appropriate manner allocated to appropriate divisions, and having managers in charge of internal control and other matters appropriately allocated to divisions independent from sales divisions.
    c.取引所取引業務の適確な遂行に必要な人員が適切な部門に配置され、内部管理等の責任者が営業部門から独立して配置されるなど、適正に業務を遂行できる組織体制、人員構成にあること。 - 金融庁
  • Use “(Attachment 1) Checklist for the Overall Internal Control System for Compliance with the Foreign Exchange Act, etc.” to check whether an institution has a system to comply with foreign exchange laws and regulations (in relation to economic sanctions such as asset freeze) within the framework of the legal compliance system.
    「(別添1)外為法令等遵守のための内部管理体制全般に係るチェックリスト」により、法令等遵守体制の枠組みの中で、外為法令(資産凍結等経済制裁関係)を遵守する体制がとられているかチェックする。 - 財務省
  • Use “(Attachment 1) Checklist for the Overall Internal Control System for Compliance with the Foreign Exchange Act, etc.” to check whether an institution has a system to comply with foreign exchange laws and regulations (in relation to economic sanctions such as asset freeze) within the framework of the administrative risk management system.
    「(別添1)外為法令等遵守のための内部管理体制全般に係るチェックリスト」により、事務リスク管理体制の枠組みの中で、外為法令(資産凍結等経済制裁関係)を遵守する体制がとられているかチェックする。 - 財務省
  • Use “Checklist for the Overall Internal Control System for Compliance with the Foreign Exchange Act, etc.” to check whether the institution has a system to comply with the Foreign Exchange Act, etc. (in relation to the obligation to identify customers of financial institutions, etc.) within the framework of the legal compliance system.
    「外為法令等遵守のための内部管理体制全般に係るチェックリスト」により、法令等遵守体制の枠組みの中で、外為法令等(金融機関等の本人確認義務関係)を遵守する体制がとられているかチェックする。 - 財務省
  • Use “ Checklist for the Overall Internal Control System for Compliance with the Foreign Exchange Act, etc.” to check whether the institution has a system to comply with foreign exchange laws and regulations (in relation to the Special International Financial Transactions Account) within the framework of the legal compliance system.
    「外為法令等遵守のための内部管理体制全般に係るチェックリスト」により、法令等遵守体制の枠組みの中で、外為法令(特別国際金融取引勘定関係)を遵守する体制がとられているかチェックする。 - 財務省
  • Use “(Attachment 1) Checklist for the Overall Internal Control System for Compliance with the Foreign Exchange Act, etc.” to check whether the institution has a system to comply with foreign exchange laws and regulations (in relation to オフショア 2 the Special International Financial Transactions Account) within the framework of the administrative risk management system.
    「外為法令等遵守のための内部管理体制全般に係るチェックリスト」により、事務リスク管理体制の枠組みの中で、外為法令(特別国際金融取引勘定関係)を遵守する体制がとられているかチェックする。 - 財務省
  • An initialization and power source control section 221 in the printer 200 initializes the internal status of the printer 200 or turns off a power source circuit 240 of the printer 200 if it is detected that the power source of personal computer 100 is turned off or the USB cable is disconnected.
    パーソナルコンピュータ100の電源のターンオフ又はUSBケーブルの抜けが検出されると、プリンタ200内の初期化・電源制御部221が、プリンタ200の内部状態を初期化するか、又はプリンタ200の電源回路240をターンオフする。 - 特許庁
  • A main control circuit 71 of this game machine, under conditions of finishing an RB (Regular Bonus) game state generated when an RB1 is satisfied, changes an internal lottery table to that to be used under an RT1 (Replay Time) operation till executing a unit game 100 times.
    遊技機の主制御回路(71)は、RB1の成立を条件に発生するRB遊技状態が終了することを条件に、100回の単位遊技が行われるまでの間、内部抽籤テーブルをRT1作動中用に切り換える。 - 特許庁
  • To provide a fuel injection amount control device for an internal combustion engine hardly degrading its emission by bringing an average air-fuel ratio of the engine closer to an appropriate air-fuel ratio even when an alcohol containing fuel is used and a non-uniformity of the fuel-air ratio among cylinders is increased.
    アルコール含有燃料が使用されて気筒別空燃比の不均一性が大きくなったとしても、機関の平均空燃比を適切な空燃比に近づけることができ、エミッションが悪化し難い燃料噴射量制御装置を提供する。 - 特許庁
  • To provide a control system for an internal combustion engine capable of stably controlling an ignition period, a fuel injection period and a fuel injection quantity at all times even in an engine having large variation of engine revolution, or in an operating area and an operating condition of large variation of engine revolutions.
    エンジン回転数の変動が大きなエンジンや運転領域、運転状態においても、常に安定した点火時期、燃料噴射時期および燃料噴射量の制御を行うことが可能な内燃機関の制御システムを提供する。 - 特許庁
  • To provide an intake control system for an internal combustion engine capable of suppressing a change in intake pressure caused by a change in a target intake air amount even in a transient operating state that the target intake air amount ia varied and stably and accurately controlling intake pressure thereby.
    目標吸気量が変動する過渡運転状態においても、目標吸気量の変更に伴う吸気圧の変動を抑制でき、それにより、吸気圧を安定して精度良く制御できる内燃機関の吸気制御装置を提供する。 - 特許庁
  • To make an internal combustion engine compact, by avoiding concentrated arrangement of a driving means on one side in the axial direction of a shift drum, in a shift control device of a vehicular transmission in which the driving means for rotatingly driving the shift drum is connected to the shift drum.
    シフトドラムに、該シフトドラムを回動駆動する駆動手段が連結される車両用変速機の変速制御装置において、シフトドラムの軸方向一方側への駆動手段の集中配置を回避して、内燃機関のコンパクト化を可能とする。 - 特許庁
  • Even in such a unit game, an internal winning combination is drawn by the control of the main CPU 42, and when the display combination of BB (bonus game) is generated by the combination of patterns by the stop of reels 4a-4c, the bonus game is executed by interruption.
    このような単位ゲームにおいても、メインCPU42の制御によって、内部当籤役の抽選が行われ、リール4a〜4cの停止による図柄の組み合わせでBB(ボーナスゲーム)の表示役が発生すると、ボーナスゲームが割り込みで実行される。 - 特許庁
  • To provide an air-fuel ratio control system for an internal combustion engine capable of controlling an actual air-fuel ratio not to slip off a target air-fuel ratio even when an air-fuel ratio sensor outputs an output value different from the actual air-fuel ratio.
    本発明は、空燃比センサ出力が実空燃比とは異なる出力値を出力した場合であっても、実空燃比が目標空燃比からずれることを抑制することができる内燃機関の空燃比制御装置を提供することを目的とする。 - 特許庁
  • This control device sets ignition timing after a top dead center in a compression stroke when an internal combustion engine is started in a cold state where an early-stage temperature rise is requested for a catalytic converter, and carries out super retard combustion where fuel is injected before the ignition timing and after the top dead center in the compression stroke.
    触媒コンバータの早期昇温が要求される内燃機関の冷間始動時に、点火時期を圧縮上死点後に設定するとともに、点火時期前でかつ圧縮上死点後に燃料を噴射する超リタード燃焼を行う。 - 特許庁
  • Through operation control of a pressure modification device, when the internal combustion engine generates the phenomenon of misfire in (S101: YES), compared with the case where no phenomenon of misfire occurs (S101: NO), pressure of the oil in the oil supply passage is set to high pressure (S103).
    圧力変更装置の作動制御を通じて、内燃機関における失火現象の発生時に(S101:YES)、同失火現象の非発生時と比較して(S101:NO)、オイル供給通路内のオイルの圧力を高圧に設定する(S103)。 - 特許庁
  • In a circulation path 2 provided in a cooling system of an automobile, a motor-driven water pump WP1 and a motor-driven water pump WP2 which are controlled and driven by an electronic control device 10 are arranged in each of an upstream side and a downstream side of an internal combustion engine 1.
    自動車の冷却系統に設けられた循環経路2において、内燃機関1の上流側と下流側とには、電子制御装置10により駆動制御される電動ウォータポンプWP1,WP2が1台ずつ配設されている。 - 特許庁
  • To provide a cooling device for internal combustion engine wherein a water temperature is controlled so as to control knocking for suppressing deterioration of fuel consumption to the maximum extent by considering the deterioration of fuel consumption caused by a phase lag of an ignition timing together with the deterioration of fuel consumption caused by reduction of the water temperature.
    点火時期遅角による燃費悪化と水温低下による燃費悪化とを考慮して燃費悪化を最大限に抑制したノッキング制御を可能にする水温制御を実現した、内燃機関の冷却装置を提供する。 - 特許庁
  • To prevent predetermined components adsorbed onto an adsorbent from being unintendedly desorbed during the period between the completion of adsorbing operation and the start of desorbing operation in an exhaust emission control device for an internal combustion engine.
    この発明は、内燃機関の排気浄化装置に関し、吸着動作の終了時から脱離動作の開始時までの期間中に、吸着材に吸着されている所定の成分の意図していない脱離を防止できるようにすることを目的とする。 - 特許庁
<前へ 1 2 .... 207 208 209 210 211 212 213 214 215 .... 245 246 次へ>

例文データの著作権について

  • 金融庁
    Copyright(C) 2026 金融庁 All Rights Reserved.
  • 財務省
    Copyright(C) 財務省
    ※この記事は財務省ホームページの情報を転載しております。内容には仮訳のものも含まれており、今後内容に変更がある可能性がございます。
    財務省は利用者が当ホームページの情報を用いて行う一切の行為について、何ら責任を負うものではありません。
  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.