「Internal Control」を含む例文一覧(12271)

<前へ 1 2 .... 214 215 216 217 218 219 220 221 222 .... 245 246 次へ>
  • To provide an ignition system for an internal combustion engine, which prevents a failure due to a self-heating ignition coil in case an engine control unit (ECU) is out of order from any cause, and fails to supply a prescribed ignition signal, resulting in consecutive emission of ignition signals.
    本発明は、特に、エンジンコントロールユニット(ECU)が何らかの原因で故障し、規定通りの点火信号を供給できずに、連続した点火信号となった場合、点火コイル自体の加熱による故障を防止する内燃機関用点火システムに関するものである。 - 特許庁
  • To provide a valve timing control device of an internal combustion engine, capable of preventing the swinging amount of a cam phase from being gradually increased, while matching a detection value of the cam phase with a target phase, by an effect of torque generated by a phase advancing mechanism.
    進角機構が発生するトルクの影響によりカム位相の検出値が目標位相と一致した状態のまま、カム位相の揺動量が徐々に増大することを抑制することのできる内燃機関のバルブタイミング制御装置を提供する。 - 特許庁
  • To provide an exhaust emission control device for an internal combustion engine preventing a lowering of operability caused by self-ignition during fuel cut-off operation when slowing down even in a diesel engine and regenerating a NO_x absorbing catalyst while suppressing oil dilution.
    ディーゼルエンジンであっても、減速時におけるフューエルカット運転中に、自己着火による運転性の低下を防止するとともに、オイルダイリューションを抑制しながら、NOx吸収触媒を再生することができる内燃機関の排ガス浄化装置を提供する。 - 特許庁
  • To provide an exhaust emission control device for internal combustion engine in which a NOX absorbent is arranged in the engine exhaust system, whereby poisoning of the NOX absorbent with oxides can certainly be eliminated while unnecessary deterioration of the NOX absorbent is precluded.
    本発明は、内燃機関の排気系にNOx吸収材が配置された排気浄化装置において、NOx吸収材の不要な劣化を防止しつつNOx吸収材の酸化物による被毒を確実に解消することができる技術を提供することを課題とする。 - 特許庁
  • To execute an appropriate fail safe process even if abnormality occurs on a water temperature sensor in control of fuel supply to a flex fuel internal combustion engine compensating shortage of low temperature evaporation performance as main fuel by supply of auxiliary fuel.
    主燃料としての低温気化性能の不足を副燃料の供給により補うフレックス燃料機関への燃料供給を制御するにあたり、たとえ水温センサに異常等が生じている場合であれ、適正なフェールセーフ処理の実行を可能とする。 - 特許庁
  • To provide an internal combustion engine control device in which the deterioration of a ternary catalyst can be accurately detected without causing the deterioration of the exhaust gas by controlling the oxygen variation of the ternary catalyst to an amount a little larger than oxygen occlusion capacity of the deteriorated ternary catalyst specified by the law.
    法令が定めた劣化三元触媒の酸素吸蔵容量よりも少し多めに三元触媒の酸素変化量を制御し、排出ガスの悪化を招くことなく高精度に三元触媒の劣化を検出可能な内燃機関制御装置を得る。 - 特許庁
  • The fuel injection control device has the intake system injection valve 13 for injecting and supplying the fuel to an intake port 12, and the inner cylinder injection valve 14 for injecting the fuel to each combustion chamber 11 as an injection valve for injecting the fuel to the combustion chamber 11 of an internal combustion engine 10.
    内燃機関10の燃焼室11に燃料を噴射する噴射弁として、吸気ポート12に燃料を噴射供給する対吸気系噴射弁13と、各燃焼室11に燃料を噴射する対筒内噴射弁14とを備える。 - 特許庁
  • To strike a balance between prevention of generation of abnormal combustion at low speed revolution and prevention of decrease in power performance at high speed revolution, regardless of whether an intake air temperature is high or low, in a control device of an internal combustion engine with a supercharger.
    この発明は、過給機付き内燃機関の制御装置に関し、吸気温度の高低に関係なく、低回転時における異常燃焼の発生防止と高回転時における出力性能の低下防止とを良好に両立させることを目的とする。 - 特許庁
  • An ECU 16 performs the feedback control of the rotation speed by regulating the throttle opening using a feedback correction term eqi calculated according to a deviation between the actual rotation speed ene and the target rotation speed entcal of the internal combustion engine 10.
    ECU16は、内燃機関10の実際の回転速度eneと目標回転速度entcalとの偏差に応じて算出されたフィードバック補正項eqiを用いてスロットル開度を調整することで、回転速度のフィードバック制御を行う。 - 特許庁
  • To provide an exhaust emission control device for an internal combustion engine that promotes the atomization of additive injected from an additive injection valve, even when no space is secured between the additive injection valve and a catalyst for sufficiently mixing additive and exhaust gas together.
    本発明は、添加剤噴射弁と触媒との間で十分に添加剤と排気ガスとを混合させるスペースが確保されなくとも、添加剤噴射弁から噴射された添加剤の霧化の促進が行える内燃機関の排気ガス浄化装置を提供する。 - 特許庁
  • The internal combustion engine is formed so that learning control such that occurrence of abnormal combustion in combustion of an air-fuel mixture in the combustion chamber is detected and a target value of at least one of a target mechanical compression ratio and a target new air suction amount is updated, is performed.
    燃焼室において混合気が燃焼したときの異常燃焼の発生を検出し、目標機械圧縮比および目標吸入新気量のうち少なくとも一方の目標値を更新する学習制御を行うように形成されている。 - 特許庁
  • To provide a technique for controlling the generation of knocking and the decrease in a combustion stability even if the amount of an introduced EGR gas is different in each cylinder, in an ignition control system for a spark ignition internal combustion engine with an EGR mechanism.
    本発明は、EGR機構を備えた火花点火式内燃機関の点火制御システムにおいて、気筒毎にEGRガス導入量が相違する場合であってもノッキングの発生や燃焼安定性の低下を抑制することができる技術の提供を課題とする。 - 特許庁
  • To restrain deterioration of combustion in lagging the ignition timing in a control device of a direct injection type spark ignition internal combustion engine in which a required quantity of fuel is injected twice in parts in a compression stroke to perform stratified charge combustion.
    圧縮行程において必要燃料量を少なくとも二回に分割して噴射することにより成層燃焼を実施する筒内噴射式火花点火内燃機関の制御装置において、点火時期を遅角する際の燃焼悪化を抑制することである。 - 特許庁
  • To provide a technology capable of reducing unburned emissions into the atmosphere, for a combustion control system for a compression ignition internal combustion engine capable of switching among a plurality of operation modes including a diffusion combustion operation mode and a premixed combustion operation mode.
    本発明は、拡散燃焼運転モードと予混合燃焼運転モードを含む複数の運転モードを切換可能な圧縮着火式内燃機関の燃焼制御システムにおいて、大気中へ排出される未燃成分を低減可能な技術の提供を課題とする。 - 特許庁
  • To provide a fuel injection control device for an internal combustion engine capable of securing a good combustion condition by controlling the auxiliary injection of the fuel properly, thereby suppressing the combustion sound, and keeping the good exhaust gas characteristics.
    燃料の副噴射を適切に制御することによって、良好な燃焼状態を確保することができ、それにより、燃焼音を抑制できるとともに、排ガス特性を良好に保つことができる内燃機関の燃料噴射制御装置を提供する。 - 特許庁
  • When the internal pressure is applied during the vulcanization of the tire, the stopper means 36 makes the taper block 30 contact the side of the stopper means 36 to control the opening of the sector molds 20 of the split mold.
    即ち、下部ベースプレート13上に、リング状に形成されたストッパー手段36が設置し、タイヤ加硫時に内圧がかかった時にテーパーブロック30がリング状のストッパー手段36の側面に当接して分割型のセクターモールド20が開くのを抑える構造としたものである。 - 特許庁
  • To provide technology capable of reducing emission of white smoke as much as possible in a combustion control system for a compression ignition type internal combustion engine capable of changing over operation mode to a plurality of operation modes including a diffusion combustion operation mode and a premix combustion operation mode.
    本発明は、拡散燃焼運転モードと予混合燃焼運転モードを含む複数の運転モードを切換可能な圧縮着火式内燃機関の燃焼制御システムにおいて、白煙の排出量を可及的に低減可能な技術の提供を課題とする。 - 特許庁
  • To provide a device for control of an internal combustion engine, capable of properly controlling combustion timing by compression ignition when a combustion mode is switched from an SI combustion mode to an HCCI combustion mode to thereby suppress combustion noise so that merchantability is improved.
    燃焼モードがSI燃焼モードからHCCI燃焼モードに切り換えられたときに、圧縮着火による燃焼タイミングを適切に制御でき、それにより、燃焼音を抑制し、商品性を向上させることができる内燃機関の制御装置を提供する。 - 特許庁
  • An electronic control device 21 estimates the catalyst temperature Tc, reduces intake amount sucked into the internal combustion engine 10 when the catalyst temperature Tc becomes lower than a prescribed temperature α during execution of stratified combustion and suppresses lowering speed of the catalyst temperature Tc.
    電子制御装置21は、触媒温度Tcを推定し、成層燃焼の実行中に触媒温度Tcが所定温度αを下回ると、内燃機関10に吸入される吸気量を低減して、触媒温度Tcの低下速度を抑える。 - 特許庁
  • To provide a control device of an in-cylinder injection type spark ignition internal combustion engine capable of obtaining favorable homogeneous combustion by changing a combustion state based on characteristics of fuel when enhancing a tumble flux using fuel injected in a homogeneous combustion time.
    均質燃焼時に噴射した燃料でタンブル流を強化するにあたって、燃料の性状に基づき燃焼状態を変更することで、良好な均質燃焼を得ることが可能な筒内噴射式火花点火内燃機関の制御装置を提供する。 - 特許庁
  • Article 51-if I remember correctly-of the Financial Instruments and Exchange Act, which was established as a revision of the Securities and Exchange Act, has introduced a new legal framework that provides for the implementation of administration action when a problem is found in a company's internal control environment for business execution.
    また、改正後の金融商品取引法、確か第51条におきましては、証券会社の業務執行態勢に問題がある場合には、そのことを事由として行政処分を打てるような法的枠組みに変わったということでございます。 - 金融庁
  • 13. The audit client outsources maintenance services of their IT system. However, the audit team did not obtain a copy of service contract or a detailed arrangement letter. The team failed to ascertain the effectiveness of the internal control of this outsourced service, too.
    ・ 被監査会社は、業務用コンピュータの運用サービスを外部に委託しているが、当該委託に係る契約書(業務委託基本契約書等)やサービス仕様書などを入手していないほか、当該委託業務に係る内部統制の検証を行っていない。 - 金融庁
  • While reviewing the existing internal control standards abroad and giving attention to the consistency with the corporate legislation in Japan, the Committee discussed what should be the content of a workable standard accountable from an international perspective and best reflecting of our country's business practices.
    同部会では、諸外国における内部統制の基準等の内容を検討するとともに、我が国会社法制との整合性等にも留意し、国際的にも説明可能で、かつ、我が国の実情にあった実効性のある基準のあり方について、審議を行った。 - 金融庁
  • Internal control cannot provide absolute assurance with respect to the achievement of objectives due to the following inherent limitations, but it aims at achieving the objectives to a reasonable extent with the organized and integrated function of individual components as a whole.
    内部統制は、次のような固有の限界を有するため、その目的の達成にとって絶対的なものではないが、各基本的要素が有機的に結びつき、一体となって機能することで、その目的を合理的な範囲で達成しようとするものである。 - 金融庁
  • Deficiencies in company-level controls, if any, should be remediated while referring to, for example, exhibit number 1, ("Examples of Assessment Items for Company-Level Controls Over Financial Reporting") included in "II. Assessment and Report on Internal Control Over Financial Reporting."
    全社的な内部統制については、例えば、「Ⅱ 財務報告に係る内部統制の評価及び報告」参考1(財務報告に係る全社的な内部統制に関する評価項目の例)に掲げられた項目を参考に、問題があれば、必要な是正をする。 - 金融庁
  • When developing a plan for the assessment and reporting of internal controls, it is advisable toleave some additional time before the final assessment date (fiscal year end date), so that control deficiencies and material weaknesses identified in the assessment can be remediated in time.
    内部統制の評価及び報告の計画を作成するときには、内部統制の不備及び重要な欠陥を発見した場合に、これを是正することを想定して、最終的な評価の時点(期末日)まで一定の期間を確保しておくことが適切である。 - 金融庁
  • If the supplementary information on remedial actions taken after the fiscal year end date is added to the Internal Control Report, external auditors should perform, for example, the following procedures to evaluate the appropriateness of such information.
    内部統制報告書に期末日後に実施された重要な欠陥に対する是正措置が付記された場合、監査人は、当該是正措置に係る内部統制報告書の付記事項などの記載内容の妥当性を検討するため、例えば、以下の手続を実施する。 - 金融庁
  • 3) To put more emphasis on interactive dialogues with the financial instrument firms, including holding meetings with top management during on-site inspections, etc., with a view to encouraging their voluntary efforts toward developing stronger internal control functions.
    ③ 実効性のある内部管理態勢の整備に向けた金融商品取引業者等の自主的な取組みに資するよう、臨店検査の開始及び終了時点等において、経営陣を交えたミーティングを実施するなど双方向の対話等を重視した検査を行う。 - 金融庁
  • Particularly in cases where complaints, etc. are being made frequently by customers, whether confirmation is first being made of how internal rules (not only those for dealing with complaints, etc.) are publicized and enforced at branches, and whether the causes and problem areas in terms of control environments are being examined.
    特に、顧客からの苦情等が多発している場合には、まず社内規則(苦情等対処に関するものに限らない。)等の営業店に対する周知・徹底状況を確認し、実施態勢面の原因と問題点を検証することとしているか。 - 金融庁
  • Whether the Financial Instruments Business Operator properly manages counterparty risk by developing a comprehensive control environment for risk management, properly recognizing and evaluating the risks, conducting internal screening when a new product or a new business is introduced and establishing a system of checks and balances based on the clear allocation of roles and responsibilities.
    総合的なリスク管理態勢の整備、適切なリスク認識と評価、新商品・新規業務導入時の社内検証の実施、役割分担と権限の明確化による相互牽制体制の構築等により、取引先リスクが適切に管理されているか。 - 金融庁
  • (iii) Whether the securities company, etc. and its parent/subsidiary corporations, etc., with which the former exchanges non-disclosure information, have developed centralized systems for management of non-disclosure information, including appointing a person responsible for management of non-disclosure information within their internal control divisions;
    ③ 証券会社等及び非公開情報の授受を行う親子法人等のそれぞれにおいて、内部管理部門に非公開情報の管理を行う責任者を設置するなど、非公開情報の管理を一元的に行う体制が整備されているか。 - 金融庁
  • Whether appropriate measures have been taken to prevent practices that could promote the interests of specific rights holders at the expense of other rights holders, such as establishing an internal control system and procedures for the prevention of collusion between different types of business in a manner suited to the nature of the business.
    特定の権利者の利益を図るため他の業務の権利者の利益を害することとなる行為等を未然に防ぐため、業務内容に応じた弊害発生防止に関する社内管理体制を整備するなどの適切な措置が講じられているか。 - 金融庁
  • Whether appropriate measures have been taken to prevent practices that could promote the interests of specific rights holders at the expense of other rights holders, such as establishing an internal control system and procedures for the prevention of collusion between different types of business in a manner suited to the nature of the business.
    特定の権利者の利益を図るため他の業務の権利者又の利益を害することとなる行為等を未然に防ぐため、業務内容に応じた弊害発生防止に関する社内管理体制を整備するなどの適切な措置が講じられているか。 - 金融庁
  • I believe that there is already a publicized schedule out for that. What I'm asking about is not that issue, but the mention of the strategy that "necessary reforms will be implemented during 2010, including reviewing the accounting standards and internal control reporting systems for small and medium-sized enterprises, and substantially simplifying quarterly reporting requirements."
    それはもう工程表が出されておられると思うのですけれども、「中小企業に係る会計基準・内部統制報告制度の見直し、四半期報告の大幅簡素化など、所要の改革を2010年中に行う」というふうに文面があるのです。 - 金融庁
  • Use “(Attachment 1) Checklist for the Overall Internal Control System for Compliance with the Foreign Exchange Act, etc.” to check whether the institution has a system to comply with the Foreign Exchange Act, etc. (in relation to the obligation to identify customers of financial institutions, etc.) within the framework of the administrative risk management system.
    「(別添1)外為法令等遵守のための内部管理体制全般に係るチェックリスト」により、事務リスク管理体制の枠組みの中で、外為法令等(金融機関等の本人確認義務関係)を遵守する体制がとられているかチェックする。 - 財務省
  • Use “Checklist for the Overall Internal Control System for Compliance with the Foreign Exchange Act, etc.” to check whether a specified business operator has a system to comply with criminal proceeds transfer prevention laws and regulations (in relation to the obligation to give notification of suspicious transactions) within the framework of the administrative risk management system.
    「外為法令等遵守のための内部管理体制全般に係るチェックリスト」により、事務リスク管理体制の枠組みの中で、犯罪収益移転防止法令(疑わしい取引の届出義務関係)を遵守する体制がとられているかチェックする。 - 財務省
  • Use “ Checklist for the Overall Internal Control System for Compliance with the Foreign Exchange Act, etc.” to check whether a specified business operator has a system to comply with criminal proceeds transfer prevention laws and regulations (in relation to the notification obligation pertaining to foreign exchange transactions) within the framework of the legal compliance system.
    「外為法令等遵守のための内部管理体制全般に係るチェックリスト」により、法令等遵守体制の枠組みの中で、犯罪収益移転防止法令(外国為替取引に係る通知義務関係)を遵守する体制がとられているかチェックする。 - 財務省
  • A control unit 42, after the stop of power generation, if the temperature difference, between the temperature detected by a stack internal temperature sensor 37 and the temperature detected by a stack surrounding temperature sensor 38, exceeds a first prescribed value, cools the coolant and then introduces it into the fuel cell stack 22.
    コントロールユニット42は、燃料電池の発電停止後、スタック内部温度センサ37が検出した温度とスタック周囲温度センサ38が検出した温度との温度差が第1所定値を超えていれば、クーラントを冷却後、燃料電池スタック22へ導入する。 - 特許庁
  • To provide a throttle control device for an internal combustion engine capable of reducing weight of a boss part while maintaining function as a spring guide of a boss part and reducing weight of the boss part while maintaining function as the spring guide of the boss part and maintaining strength of the boss part.
    ボス部のスプリングガイドとしての機能を維持しつつボス部の軽量化を図ることと、ボス部のスプリングガイドとしての機能維持およびボス部の強度維持をしつつボス部の軽量化を図ることができる内燃機関のスロットル制御装置を提供すること。 - 特許庁
  • To provide an automatic frequency control system capable of quickly synchronizing the frequency of an internal clock of a mobile terminal with that of a clock of a base station to be a new connection destination when power for the mobile object is turned on or the terminal is restored from the outside of a range.
    移動端末が電源投入時、圏外からの復帰時、ハンドオーバ時などに、移動端末の内部クロックの周波数を新しい接続先の基地局のクロックの周波数に即座に同期させることを可能とする自動周波数制御方式を提供する。 - 特許庁
  • Therefore, even after power is interrupted and then the power is turned on (power recovery), a variation pattern is selected based on the variation pattern sorting table according to the kind and internal control state when power is interrupted, and the game amusement is achieved according to the condition when power is interrupted.
    その結果、電源断されて電源投入(復電)された後も電源断時の種別と内部制御状態に応じた変動パターン振分テーブルで変動パターンが選択されることになり、電源断時の状況に応じた遊技性を実現することができる。 - 特許庁
  • An electric double layer capacitor 1 has a power storage device body 2, an enclosure 3 housing the power storage device body 2 and internally storing an electrolyte with which the power storage device body 2 is impregnated, and a pressure control unit 4 which adjusts the internal pressure of the enclosure 3.
    電気二重層キャパシタ1では、蓄電デバイス本体2と、蓄電デバイス本体2を収容し、蓄電デバイス本体2に含浸される電解液が内部に溜められた外装体3と、外装体3の内圧を調整する圧力調整装置4とを有している。 - 特許庁
  • To provide a fuel injection control device for an internal combustion engine in which a desirable amount of fuel can be precisely injected by the second injection by securing a voltage boosting time for the second injection till the start of the second injection after the execution of the first injection.
    第1噴射の実行後、第2噴射が開始されるまでの間に、第2噴射のための電圧の昇圧時間を確保し、第2噴射によって所望量の燃料を精度良く噴射できる内燃機関の燃料噴射制御装置を提供する。 - 特許庁
  • To provide a method of controlling data output and the like, with which various internal data of control softwares can be outputted to outside at any time, and with which a trouble that otherwise consumes extraordinary time for analysis can be analyzed rapidly and solved, without degrading throughput of an exposure system.
    露光装置のスループットを落とすことなく、制御ソフトウェアの種々の内部データを常に外部へ出力可能であり、従来は解析に非常に時間を要したトラブルが迅速に解析、解決できるデータ出力制御方法等を提供する。 - 特許庁
  • When a discharge pressure of a prevention pump 20 is elevated by an increase in the number of revolutions of an engine after the spreading control of the chemical liquid starts, the internal pressure in a liquid entry line 52b can be maintained at the specified pressure or below by a safety valve 89 disposed in a return line 60.
    また、薬液の散布制御を開始した後、防除ポンプ20の吐出圧がエンジンの回転数の増加により高くなる時、戻りライン60に設けられた安全弁89で入液ライン52b内の内圧を一定以下に保つことができる。 - 特許庁
  • A circuit wiring body 1 having a grounding circuit, a power source circuit and an engine control unit 16, and further having an inner connector 10 and an outer connector 11 connected to these electrical units is attachably/detachably provided on an engine member of an internal combustion engine, for example, an engine head cover 2.
    内燃機関のエンジン部材例えばエンジンヘッドカバー2に、アース回路、電源回路及びエンジンコントロールユニット16を有すると共に、これら電装品に接続される内部コネクタ10及び外部コネクタ11を有する回路配索体1を脱着可能に設ける。 - 特許庁
  • To provide a control device of an internal combustion engine which can prevent a shock when an engine is stopped or the engine is started by controlling flare while considering the variation of the number of revolutions of the engine caused by the variation of a machine difference or deterioration with a time in start-up from an idling stop.
    アイドルストップからの始動時において、機差ばらつきや経時劣化などによるエンジン回転数の変動を考慮してフレアを制御することで、エンストや始動時のショックを防止することのできる内燃機関の制御装置を提供すること。 - 特許庁
  • The control device firstly sets the opening/closing timing of the intake valve of the group of cylinders (hereinafter referred to as "specific group of cylinders") to which the cylinder (referred to as "specific cylinder") reaching the closing timing of the intake valve at a first opening/closing timing belongs to the first opening/closing timing after starting of the internal combustion engine.
    この制御装置は、内燃機関の始動後最初に、第1開閉タイミングにおける吸気弁の閉弁タイミングに達する気筒(以下「特定気筒」)が属する気筒群(以下「特定気筒群」)の、吸気弁の開閉タイミングを、第1開閉タイミングに設定する。 - 特許庁
  • On the movable wall 22, a spring 23 is mounted in the variable volume controller 20 for supporting the movable wall 22; and when the internal pressure in the automatic control chamber 11 exceeds the force of the spring 23, the movable wall 22 moves in the direction of compressing the spring 23.
    可動壁22には可変ボリューム部20内に該可動壁22を支持するためのばね23が取り付けられ、自力室11の内部圧力がばね23のばね力を上回ると、可動壁22がばね23を圧縮する方向に動作するようになっている。 - 特許庁
  • To provide a technique to further improve a NOx reducing efficiency by combining a plurality of means to reduce an exhaust air-fuel ratio and setting a rate of a reducing the air-fuel ratio by each means to an appropriate value, in an exhaust emission control device for an internal combustion engine.
    内燃機関の排気浄化装置において、排気の空燃比を低下させる手段を複数組み合わせ、さらに各手段による空燃比低下の割合を適正な値に設定することによりNOx還元効率をより向上させる技術を提供する。 - 特許庁
<前へ 1 2 .... 214 215 216 217 218 219 220 221 222 .... 245 246 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.
  • 財務省
    Copyright(C) 財務省
    ※この記事は財務省ホームページの情報を転載しております。内容には仮訳のものも含まれており、今後内容に変更がある可能性がございます。
    財務省は利用者が当ホームページの情報を用いて行う一切の行為について、何ら責任を負うものではありません。
  • 金融庁
    Copyright(C) 2026 金融庁 All Rights Reserved.