To obtain a resin composition for optical fiber coating, capable of keeping liquid without crystallizing even under low temperature storage, having both of high Young's modulus and high elongation and capable of providing slightly yellowing cured material. 低温保存下でも結晶化せずに液状を保ち、かつ高ヤング率・高伸長を兼ね備え、難黄変性の硬化物を与える光ファイバ被覆用樹脂組成物を提供する。 - 特許庁
To provide an ultra low dielectric constant (k) film which has a dielectric constant of not greater than 2.7 and exhibits improved mechanical properties such as improved elastic modulus and hardness, and also provide a method of manufacturing the film. 誘電率が2.7以下であり、弾性計数および硬度の改善等、機械的特性を向上させた超低誘電率(k)膜、および膜の製造方法を提供する。 - 特許庁
To provide a curable composition having a low modulus and low recovery properties, without causing problems of bubble formation, deterioration in an outward appearance, etc., and capable of being suitably used as an adhesive, a sealing material, etc. 低モジュラス及び低復元性を有し、気泡発生及び外観悪化等の問題がなく、接着剤やシーリング材等として好適に用いられる硬化性組成物を提供する。 - 特許庁
To obtain an insulative covering material composition which is cured easily with active energy beam radiation, realizes high productivity and of which the cured product has a high tensile elastic modulus and a low dielectric constant. 活性エネルギー線の照射で容易に硬化し生産性が高く、並びにその硬化物の引張り弾性率が大きく低誘電率である絶縁被覆材料組成物の提供。 - 特許庁
To produce a low-cost copper alloy for a connector having excellent stress corrosion cracking resistance, 0.2% proof stress, tensile strength, electric conductivity, Young's modulus, stress relaxation resistance, pressability, or the like, and to provide its production method. 耐応力腐食割れ性、0.2%耐力、引張強さ、導電率、ヤング率、耐応力緩和特性、プレス性等に優れた低コストのコネクタ用銅合金およびその製造法を提供する。 - 特許庁
To provide a heat-resistant resin composition which has good heat resistance, scarcely changes thermal expansion coefficient and elastic modulus at high temperature, and hardly causes cracks and peeling, and to provide a method for producing the same. 耐熱性がよく、高温での熱膨張係数及び弾性率の変化が少なく、クラックや剥離が発生しにくい耐熱性樹脂組成物、その製造方法を提供する。 - 特許庁
A cushioning film 6 consisting of a material smaller in Young's modulus and hardness than those of quartz is formed on the surface of a reinforcing member 3 of the optical fiber parts, and the thickness of the film is made ≥5 μm. 光ファイバ部品の補強部材3の表面に、石英よりもヤング率および硬度の小さい材料からなる緩衝膜6が形成され、厚さ5μm以上とする。 - 特許庁
The chuck part 3 is made of a material having Young's modulus ranging between 200 GPa and 250 GPa, a coefficient of thermal expansion of 14-18×10^-6/°C, and has a high rigidity and grasping force. チャック部3の材料はヤング率が200GPa〜250GPaの範囲内にあり、かつ熱膨張率が14から18×10^-6/°Cの範囲内にあり、高い剛性と把持力を有する。 - 特許庁
To provide a photocurable resin composition which is suitably used in a cast molding method, is instantly curable, shows a moderate elastic modulus and an excellent elongation and is excellent in hydrolysis resistance. 注型成形方法に好適な、瞬時に硬化可能で、適度な弾性率と優れた伸び性を示し、さらに耐加水分解性に優れた光硬化性の樹脂組成物を提供する。 - 特許庁
It is advantageous that the first adhesive layer and the second adhesive layer have ≥1×10^5 N/m^2 storage elastic modulus and the third adhesive layer has ≤3×10^4 N/m^2. 第一の粘着層と第二の粘着層は貯蔵弾性率を1×10^5N/m^2以上とし、第三の粘着層は貯蔵弾性率を3×10^4N/m^2以下とするのが有利である。 - 特許庁
To provide a method for producing a polyvinyl alcohol-based fiber with high tenacity and high Young's modulus, by a high-speed spinning process suitably giving polyvinyl alcohol-based undrawn yarn which is highly effectively drawn at a high speed. 高強度高ヤング率なポリビニルアルコール系繊維が得られ、かつ高効率高速延伸可能なポリビニルアルコール系紡糸原糸を得るのに適した高速紡糸法を提供する。 - 特許庁
To provide a manufacturing method for an adhesive sheet used for manufacturing a build-up printed wiring board excellent in copper adhesive strength, heat resistance, elastic modulus and reliability by a substractive method and an additive method. サブトラクティブ法、アディティブ法にて銅接着力、耐熱性、弾性率、信頼性に優れたビルドアッププリント配線板を作製するための接着シートの製造方法を提供する。 - 特許庁
The laminated film made of a polyolefinic resin is constituted by providing a surface layer on at least the single surface of a base material layer and the 10% strain/stress relaxation ratio thereof is 30% or more and the tensile elastic modulus thereof is 100-700 MPa and the bending elastic modulus of the resin composition constituting the surface layer is higher than that of the resin composition constituting the base material layer. 基材層の少なくとも片面に表面層を有するポリオレフィン系樹脂製積層フィルムであって、フィルムの10%歪み応力緩和率が30%以上、引張弾性率が100〜700MPa、かつ表面層を構成する樹脂組成物の曲げ弾性率が基材層を構成する樹脂組成物の曲げ弾性率より高い積層フィルム。 - 特許庁
To provide a resin composition that has excellent heat resistance, moreover has excellent mechanical properties, such as impact resistance, flexural modulus of elasticity, tensile strength or the like, and excellent flame retardancy by overturning the common knowledge that it is impossible to improve the impact resistance, flexural modulus of elasticity, flame retardancy or the like, as retaining the genuine heat resistance of thermoplastic resin. 熱可塑性樹脂本来の耐熱性を保持したままで、その耐衝撃性、曲げ弾性率、難燃性などを向上させるのは矛盾することで、不可能であると考えられていたのを覆し、優れた耐熱性を有し、しかも耐衝撃性、曲げ弾性率、引っ張り強度などの機械特性や難燃性などに優れた樹脂組成物およびその成形体を提供する。 - 特許庁
By adding a fibrous substance and a high polymer improved material to the soil free from uniaxial compressive strength, both moisture content and wet density are small in comparison with only cement hardener addition, and while having the uniaxial compressive strength equivalent or stronger in one hand, a modulus of deformation thereof makes smaller than the original modulus of deformation, and a breaking strain thereof makes larger than the original breaking strain. 一軸圧縮強さを有しない土に繊維質物質と高分子系改良材を添加することにより、セメント固化材添加のみの場合に比べて含水比並びに湿潤密度がともに小さく、一方で同等もしくはそれ以上の一軸圧縮強さを有し、その変形係数を元の変形係数よりも小さくし、その破壊ひずみを元の破壊ひずみよりも大きくする。 - 特許庁
This thermosetting resin composition containing 100 pts.wt. thermosetting resin, 1-200 pts.wt. curing agent of the thermosetting resin and 0.1-600 pts.wt. organized phyllosilicate is provided by setting to have ≤0.5 GPa tensile modulus of elasticity at 20°C after curing and also ≤3 GPa tensile modulus of elasticity at (-)20°C after curing. 熱硬化性樹脂100重量部と、熱硬化性樹脂の硬化剤1〜200重量部と、有機化層状珪酸塩0.1〜600重量部とを含む熱硬化性樹脂組成物であって、硬化後の20℃における引張弾性率が0.5GPa以下とされており、かつ硬化後の−20℃における引張弾性率が3GPa以下とされている、熱硬化性樹脂組成物。 - 特許庁
To provide a massage machine providing an appropriate massage effect by giving a soft contact feeling to therapeutic portions in a massaging operation by therapeutic elements, improving safety as the massage machine, allowing a user to select an elastic modulus of a therapeutic element support body, and allowing the user to change it to an arbitrary elastic modulus. 施療子によるマッサージ動作において、施療部位にソフトな接触感覚を与えることができると共に、マッサージ機としての安全性を高めることができ、しかも施療子支持体の弾性係数を選択することができるものとし、使用者が任意の弾性係数を有するものに変更することにより、適切なマッサージ効果を得ることができるようにしたマッサージ機を提供する。 - 特許庁
The base for the adhesive sheet is used to mount the semiconductor chip having the projection electrode on a surface, and has a hard layer and soft layers laminated on both sides of the hard layer, wherein the hard layer has a tensile modulus of ≥0.5 GPa at 40 to 80°C, and the soft layers have a tensile modulus of 10 kPa to 300 MPa at 40-80°C. 表面に突起電極を有する半導体チップの実装に用いられる接着シート用基材であって、硬質層と、該硬質層の両側に積層された柔軟層とを有し、前記硬質層は、40〜80℃での引張り弾性率が0.5GPa以上であり、前記柔軟層は、40〜80℃での引張り弾性率が10kPa〜300MPaである接着シート用基材。 - 特許庁
With respect to viscoelasticity of the electrophotographic low temperature fixable toner to temperature variation obtained by a viscoelasticity measuring device, the lowest one of inflection points from upward convexity to downward convexity on a measured curve of storage modulus G' appears at 45-60°C, and a storage modulus G' of the toner at 180°C is 1×10^2-5×10^3 Pa. 粘弾性測定装置によって得られた温度変化に対する粘弾性特性において貯蔵弾性率G’の測定曲線の上に凸から下に凸に移行する変曲点の内最も低い温度で現れるものが45〜60°Cであり、かつ180℃での貯蔵弾性率G’180が1×10^2〜5×10^3Paであることを特徴とする電子写真用の低温定着性トナー。 - 特許庁
This anisotropically conductive adhesive film 1A is composed of a first nonconductive adhesive layer 2, second nonconductive adhesive layer 3 having lower modulus of elasticity after cured than modulus of elasticity of the first nonconductive adhesive layer 2 after cured and conductive particles 4 dispersed in at least one side of the first nonconductive adhesive layer 2 and the second nonconductive adhesive layer 3. 異方導電性接着フィルム1Aが、第1の絶縁性接着剤層2と、硬化後の弾性率が第1の絶縁性接着剤層2の硬化後の弾性率よりも低い第2の絶縁性接着剤層3と、第1の絶縁性接着剤層2又は第2の絶縁性接着剤層3の少なくとも一方に分散している導電粒子4からなる。 - 特許庁
This thermosetting die-bonsing film 3 is used for manufacturing a semiconductor device, and includes at least an epoxy resin; a phenol resin; an acrylic copolymer; and a filler with a storage elastic modulus in the range of 10 kPa to 10 MPa prior to thermosetting at 80-140°C; and a storage elastic modulus in the range of 0.1-3 MPa, prior to thermosetting at 175°C. 熱硬化型ダイボンドフィルム3は、半導体装置の製造の際に用いる熱硬化型ダイボンドフィルム3であって、エポキシ樹脂、フェノール樹脂、アクリル共重合体及びフィラーを少なくとも含み、80℃〜140℃における熱硬化前の貯蔵弾性率が10kPa〜10MPaの範囲内であり、175℃における熱硬化前の貯蔵弾性率が0.1MPa〜3MPaの範囲内である。 - 特許庁
The silicone rubber roller is surfaced with dimethylsilicone rubber having a storage modulus E' in a range of >1.0×10^6 to <1.5×10^7 dyn/cm^2 and a loss modulus E" in a range of >1.0×10^5 to <7.5×10^5 dyn/cm^2 and containing ferric chloride. 貯蔵弾性率E’が1.0×10^6dyn/cm^2よりも大きく1.5×10^7dyn/cm^2よりも小さな範囲にあり、損失弾性率E”が1.0×10^5dyn/cm^2よりも大きく7.5×10^5dyn/cm^2よりも小さな範囲にあり、塩化第二鉄を含有するジメチルシリコーンゴムを少なくとも表面に有することを特徴とするシリコーンゴムローラ。 - 特許庁
This propylene polymer composition is such one as to be compounded with 3-30 wt.% of an ethylene-unsaturated carboxylic acid copolymer ionomer and have a storage modulus at 195°C E'195 of ≥10 MPa and the ratio of storage modulus at 175°C to that at 195°C:E'175/E'195 of ≤3.5. エチレン・不飽和カルボン酸共重合体アイオノマーを3〜30重量%配合したプロピレン重合体組成物であって、195℃における貯蔵弾性率E’_195の値が10MPa以上で、かつ175℃における貯蔵弾性率E’_175と195℃における貯蔵弾性率E’_195の比E’_175/E’_195が3.5以下であることを特徴とするプロピレン重合体組成物。 - 特許庁
This high molecular weight atactic polypropylene produced by using a metallocene catalyst comprising a metallocene compound, an activating compound and if necessary an organic aluminum compound, has a type A durometer hardness of ≤HAD 60 measured by a method based on JIS K7215 and the following relational expression between a storage elastic modulus (E'160) at 160°C and a storage elastic modulus (E'25) at 25°C. メタロセン化合物、活性化化合物、及び所望により使用する有機アルミニウム化合物とからなるメタロセン触媒を用いて製造し、JIS K7215に準拠して測定したタイプAのデュロメーター硬度がHDA60以下であり、160℃における貯蔵弾性率(E’_160)と25℃における貯蔵弾性率(E’_25)との間に下記の関係式を有するようにポリプロピレンを構成する。 - 特許庁
The composite film has a metal oxide-containing layer (layer M) on at least one surface of a biaxially stretched polyester film, and shows all light transmission of 10 to 75% and a ratio of storage modulus at 60°C to storage modulus at 160°C of 1.5 to 5.0 in dynamic viscoelasticity measured at a frequency of 1 Hz in the lengthwise direction of the film. 二軸配向ポリエステルフィルムの少なくとも片面に金属系酸化物を含む層(M層)を有し、該フィルムの全光線透過率が10〜75%の範囲内であり、かつ、フィルム長手方向に周波数1Hzで測定した動的粘弾性において、(温度60℃の貯蔵弾性率)/(温度160℃の貯蔵弾性率)の比が1.5〜5.0であることを特徴とする複合フィルムとする。 - 特許庁
In particular, a material having Young's modulus of 1×10^4 kg/mm^2 or above is employed in the electrode layer 58, and the film thickness of the electrode layer 58 is set at 0.3 μm or above, preferably at 1 μm or above. 特に、電極層58をヤング率が1×10^4kg/mm^2以上の材料とし、かつ、電極層58の膜厚を0.3μm以上、好ましくは1μm以上とすると良い。 - 特許庁
A cloth with 5% modulus characteristics of not more than 0.200 kg per 50 mm width of a sample collected at 45° against the length direction of the cloth is used as a conductive or insulating cloth. 導電性又は絶縁性布帛として、5%モジュラス特性が、布帛の長さ方向に対して45°の角度で採取した試料の50mm幅当たり、0.200kg以下である布帛を使用する。 - 特許庁
The Young's modulus E of the base rubber 16A of the tread part 16 is largely determined (100×105 through 150×105 Pa), and a half width βW of the base rubber 16A is determined to be 55-80% of a belt half width BW. トレッド部16のベースゴム16Aのヤング率Eを大きく設定(100×10^5 〜150×10^5 Pa)し、ベースゴム16Aの半幅βWをベルト半幅BWの55〜80%に設定する。 - 特許庁
As for the first layer 11a, an elastic modulus G' measured by a shear method at a frequency of 10 Hz and a temperature of 20°C in a dynamic viscoelasticity measurement is in a range of 3.0×10^4 Pa to 5.0×10^5 Pa. 第1層11aは動的粘弾性測定により、周波数10Hz、温度20℃でせん断法で測定した弾性率G’が3.0×10^4Pa〜5.0×10^5Paの範囲にある。 - 特許庁
To provide a vibration insulation rubber composition improving creep resistance while keeping tensile physical properties and low dynamic-to-static modulus ratio after heat aging; and to provide vibration insulation rubber provided by vulcanizing the rubber composition. 本発明は、熱老化後の引張物性及び低動倍率を保持しつつ、耐クリープ性を向上し得る防振ゴム組成物、及び該ゴム組成物を硬化させてなる防振ゴムを提供することを目的とする。 - 特許庁
The golf club head 1 made of an amorphous metal comprises at least part of a face part that satisfies the relationship y≥0.006x+60 when Young's modulus is x (unit: kgf/mm2) and tensile strength is y (unit: kgf/mm2). ヤング率をx(単位:kgf /mm^2 )、引張強度をy(単位:kgf /mm^2 )としたときに、少なくともフェース部の一部が、 y≧0.006x+60 の関係を満たす非晶質金属からなるゴルフクラブヘッド1である。 - 特許庁
To obtain an aniline-aldehyde resin to be compounded with rubber, providing excellent toughness without reducing hardness and modulus, causing low heat build-up, and having activities as a deterioration-inhibiting agent; and to obtain a rubber composition using the resin. 硬度、モジュラスを低下させることなく、靱性に優れ、低発熱性であり、劣化防止剤としての作用も有するゴム配合用アニリン・アルデビド樹脂およびこれを用いたゴム組成物を提供する。 - 特許庁
Since high rigidity rubber 28A and low rigidity rubber 28B are laminated in the leg part 28, compression modulus of elasticity in the direction of vehicle weight support when the vehicle performs run-flat running is higher than a case where only low rigidity rubber is used. 脚部28には、高剛性ゴム28Aと低剛性ゴム28Bとが積層されているため、ランフラット走行時における車重支持方向の圧縮弾性率が、低剛性ゴムのみの場合より高い。 - 特許庁
To provide a curable resin composition which has excellent heat resistance, particularly undergoes no changes in its storage elastic modulus (G') within the range from low to high temperatures and is excellent in workability with a low viscosity and in storage stability. 本発明は、耐熱性に優れ、特に、低温から高温まで貯蔵弾性率(G′)に変化がなく、低粘度で作業性に優れ、貯蔵安定性にも優れる硬化性樹脂組成物を提供する。 - 特許庁
The TiB_2 base Ti-Si-C based composite ceramic is provided with a phase comprising TiB_2, TiC and Ti_3SiC_2 and has the characteristics of high Young's modulus, high hardness and high fracture toughness. TiB_2、TiC及びTi_3SiC_2からなる相を備え、高ヤング率、高硬度、高破壊靭性の特性を有することを特徴とするTiB_2基Ti−Si−C系複合セラミックス。 - 特許庁
At least on the first seal plate 11 among the first and the second seal plates 11 and 12, a metal layer 20 with lower Young's modulus than the inner member 1 is formed on the surface of a magentic body, a steel plate. 第1,第2のシール板11,12のうち、少なくとも第1のシール板11を、磁性体からなる鋼板の表面に、内方部材1よりもヤング率の低い金属層20を形成したものとする。 - 特許庁
The sound insulating material comprises a polyurethane foam which has a Young's modulus of 1.5×10^5 to 3.5×10^5 N/m^2, density of 60 to 130 kg/m^3 and ventilation resistance of 1,000 to 8,000 Ns/m^3. 本発明の防音材は、ポリウレタンフォームからなり、ヤング率が1.5×10^5〜3.5×10^5N/m^2、密度が60〜130kg/m^3、通気抵抗が1000〜8000Ns/m^3である。 - 特許庁
To obtain an active energy radiation-curing resin composition which has a moderate viscosity suitable for printing, or the like, and yields a cured product showing a low elastic modulus and an excellent restoring force after shape deformation. 低弾性率でありながら形状変化後の復元性に優れた硬化物を与え、印刷等に使用可能な適度な粘度を有する活性エネルギー線硬化型樹脂組成物を提供すること。 - 特許庁
The constrained damping material having a damping layer and a restricted layer features to use a viscoelastic body whose loss modulus (E") is from 2.00 E+09 to 2.00 E+11 for the aforementioned damping layer. 制振層と拘束層とを有する拘束型制振材において、前記制振層に損失弾性率(E”)が2.00E+09〜2.00E+11の粘弾性体を用いたことを特徴とする。 - 特許庁
To provide a thermosetting die-bonding film having both a high adhesive force and a storage elastic modulus required for semiconductor device manufacturing, as well as, a dicing-die-bonsinging film equipped with the thermosetting die-bonding film. 半導体装置の製造に必要な貯蔵弾性率と高い接着力を併せ持つ熱硬化型ダイボンドフィルム、及び当該熱硬化型ダイボンドフィルムを備えたダイシング・ダイボンドフィルムを提供する。 - 特許庁
This IC card incorporates at least an IC chip in its inside, the IC chip is provided with a reinforcing board through adhesive, and the adhesive consists of two or more types of adhesives whose elastic modulus is different. ICカードは、内部に、少なくともICチップを内蔵し、このICチップに接着剤を介して補強板が設けられ、接着剤が弾性率の異なる2種以上の接着剤から構成されてなる。 - 特許庁
To provide a method for producing a CNT-containing resin composite which educes the original physical properties of CNT and has a high elastic modulus, and a highly elastic resin composite and a resin film. 本発明はCNT本来の物性を引き出し、高弾性率を有するCNT含有樹脂複合体の製造方法、及び高弾性樹脂複合体、樹脂フィルムを提供することを目的とする。 - 特許庁
The thermosetting resin has a postcure tensile modulus of 0.001-1 GPa at 35°C and a precure resin fluidity of 5-50% under heat and pressure at 150°C and 2.94×10^-1 MPa. 硬化後引張り弾性率が35℃において0.001〜1GPaであり、硬化前において、150℃、2.94×10^−1MPaの加熱加圧時における樹脂流動率が5〜50%である熱硬化性樹脂。 - 特許庁
To obtain a high-modulus glass or glass ceramic of SiO2-B2O3-RO-R2O- ZrO2-TiO2-Nb2O5-La2O3 base, suitable as an optical glass or a substrate for fixed disks. SiO_2−B_2O_3−RO−R_2O−ZrO_2−TiO_2−Nb_2O_5−La___2O_3系をベースとした、高い弾性率を有し、固定ディスク用基板や光学ガラスとして適したガラス及びガラスセラミックスを提供する。 - 特許庁
The substrate layer has a glass transition temperature of 100-160°C, a heat conductivity of ≥0.10 W/(m×K), a light transmittance of ≤30% at the wavelength of 355 nm, and a Young's modulus of 5-20 GPa. なおかつ基材層は、ガラス転移温度が100〜160℃、熱伝導率が0.10W/(m・K)以上、波長355nmでの光線透過率が30%以下であり、ヤング率が5〜20GPaである。 - 特許庁
This cavity is formed in the shape of extending in one direction along an outside surface of a base body, and a part adjacent to an end part of the cavity in the base body, is set larger in an elastic modulus than the other part. この空洞は、空洞は、基体の外表面に沿って一方向に延在した形状であり、基体における空洞の端部に隣接した部位は、他の部位よりも弾性率が大きい。 - 特許庁
The head 1B consists of a large head of a 280 cm^3 volume and includes a high rebounding part 8 made from a metallic material having a Young's modulus E of 30 to 110 (GPa) at least a part of the face 3. 前記ヘッド1Bは、体積が280cm^3 以上の大型ヘッドからなり、かつ前記フェース部3の少なくとも一部にヤング率Eが30〜110(GPa)の金属材料からなる高反発部8を含む。 - 特許庁
The conductor 4 is arranged so that the total denier number becomes 5000 to 8000 and an elastic modulus of the belt when extending the belt up to 3% from 1% becomes 1800 to 4500 kgf per one rib. 心線4は、総デニール数が5000〜8000であり、ベルトを1%から3%まで伸張する際のベルト弾性率が1リブあたり1800〜4500kgfとなるように設けられている。 - 特許庁
To provide a method for producing an excellent optical film having large tear strength and elastic modulus and capable of beforehand preventing fracture of a film and reducing dimensional change of the film by moisture absorption. 本発明の目的は、引裂き強度と弾性率が大きく、フィルムの破断を未然に防ぎ、かつ吸湿によるフィルム寸法変化を低減できる優れた光学フィルムの製造方法を提供する。 - 特許庁
The cellulose ester film for protection of a polarizing plate has 2,800 to 4,000 MPa elastic modulus under water-absorbed condition and 20 to 850 g/m^2×24 h or lower moisture permeability at 40°C and 90% RH. 吸水弾性率が2800〜4000MPaであり、且つ40℃、90%RHでの透湿度が20〜850g/m^2・24h以下であることを特徴とする偏光板保護用セルロースエステルフィルム。 - 特許庁