Since the spacer 12 reaches the same Young's modulus as that of the adhesive 2 after curing the adhesive 2, and when the adhesive 2 is contracted by a temperature change, stress received from the spacer 12 to the sensor chip 3 can be reduced and the temperature characteristics of the sensor chip 3 can be improved. これによると、接着剤2の硬化後においては、スペーサ12は接着剤2と同じヤング率となるので、温度変化による接着剤の収縮時にセンサチップ3がスペーサから受ける応力を低減でき、センサチップ3の温度特性を改善できる。 - 特許庁
The polishing pad characterized by having a moisture content of 1% or less, and a stability of aging characteristic that the tensile storage elastic modulus of a polishing layer four hours later after it is dipped in water is 1.05 times or less that of polishing 24 hours later, is used. 含水率が1%以上であり、かつ、水浸漬開始より4時間時の研磨層の引張貯蔵弾性率が24時間時の研磨層の引張貯蔵弾性率の1.05倍以下である経時特性安定性を有することを特徴とする研磨パッドを用いる。 - 特許庁
With this structure, for example, interface using metal or ceramic materials can be used in combination with an advantage of the compound structure, such as low specific gravity and high Young's modulus at a position and in a direction requiring high strength and high stability and high electrical resistance. かかる構成により、例えば、金属またはセラミック材料を用いる従来のインターフェイスを、高強度、高安定性および高電気抵抗を必要とする位置および方向で、低比重、高ヤング係数のような複合構造の利点と合わせて使用できる。 - 特許庁
The nonwoven fabric laminate 10 is obtained by laminating a polypropylene nonwoven fabric 12 and a thermoplastic resin film 11 composed of a thermoplastic resin, and shows the 10 % modulus of not less than 65 N/50 mm in the MD direction as measured by a method complying with JIS-L1096. 不織布積層体10は、ポリプロピレン不織布12と、熱可塑性樹脂からなる熱可塑性樹脂フィルム11とを積層してなり、JIS−L1096に準拠した方法で測定したMD方向の10%モジュラスが65N/50mm以上である。 - 特許庁
By selecting a stress absorbing material having a certain modulus and a certain degree of inherent flexibility, the present inventors believe the resettable fuse is better able to expand to its full capacity upon exposure to an excessive current. ある特定の弾性率及びある程度の固有可撓性を有する応力吸収材料を選択することによって、このリセッタブル・ヒューズは、過剰な電流にさらされたときに、良好に最大限まで膨張することができることを本発明者は確信する。 - 特許庁
To provide a glass ceramic sintered compact which can be fired together with low resistance metals such as silver, copper and gold and has high strength, high Young's modulus, high fracture toughness, high thermal conductivity and high chemical resistance, and to provide a wiring board using the sintered compact. 銀、銅、金等の低抵抗金属との同時焼成が可能であり、高い強度、高いヤング率、高い破壊靭性、高い熱伝導率、かつ高耐薬品性を有するガラスセラミック焼結体、およびかかる焼結体を用いた配線基板を提供する。 - 特許庁
To provide a polymer suitably used for film formation and its producing method and a composition including the same for forming a film capable of baking in a short time and imparting a film having low dielectric constant, excellent in heat resistance, modulus of elasticity and resistance to cracking. 膜形成に好適に用いられる重合体及びその製造方法、この重合体を含有し、短時間焼成が可能であり、耐熱性、弾性率及びクラック耐性に優れ、低誘電性の膜を得ることができる膜形成用組成物を提供する。 - 特許庁
The heat storage material-microencapsulated solid material is such that microcapsules including a heat storage material are made to adhere to one another together with a binder, wherein the modulus of the binder is lower than that of a resin constituting the film of the microcapsules. 蓄熱材を内包する蓄熱材マイクロカプセルを結着剤とともに固着せしめた蓄熱材マイクロカプセル固形物において、該結着剤の弾性率が該蓄熱材マイクロカプセルを形成するカプセル皮膜構成樹脂の弾性率よりも小さい値を持つ結着剤を用いる。 - 特許庁
Even when the fixation temperature is lower than that in the conventional manner, the viscoelastic modulus of the toner becomes within an extent fit to the fixation, and the toner is moderately deformed by heating and pressurizing the toner, and the toner is satisfactorily fixed in a wide fixation temperature area without causing the toner offset and the defective fixation. 定着温度が従来に比して低くてもトナーの粘弾性率が定着に適した範囲となり、加熱及び加圧によってトナーが適度に変形し、広い定着温度領域でトナーオフセットや定着不良がなく良好に定着することができる。 - 特許庁
The slimming wear 1 comprises an upper garment formed of a body part 10 and right and left pairs of sleeves 11, 11, wherein the upper garment is provided with highly elastic areas 20-23 where a padding cloth is integrally superimposed to increase the modulus of elasticity. 伸縮性布地によって形成した胴体部10と左右一対の袖11、11とにより上衣を形成し、この上衣に、当て布を一体的に重合して弾性率を高くした高弾性領域20〜23を設けて痩身衣類1を形成する。 - 特許庁
An elastic seal by a superelastic β-based titanium alloy has a very small elastic modulus, can deform flexibly to a shape of a cone-like valve body, has a characteristic that it resets to the original form after deformation, and thereby the reliability of sealing can be raised. 超弾性β系チタン合金による弾性シールは、弾性係数が非常に小さく、コーン状弁体の形状に対してフレキシブルに変形することが出来、変形後も元の形に復帰するという性質を有するので、シールの信頼性を上げることが出来る。 - 特許庁
(°C) in the DSC curve of the crystalline resin with the flexural modulus of elasticity of 9,000 kg/cm2 or more at 23°C]. ただし、Aは23℃での曲げ弾性率が9000Kg/cm^2以上の結晶性樹脂のDSC曲線における結晶化ピーク温度(℃)、Bは23℃における曲げ弾性率が9000Kg/cm^2以上の結晶性樹脂のDSC曲線における融解ピーク温度(℃)である。 - 特許庁
An adjusting member 152 which is small in the area in the plane view and small in the vertical elastic modulus is arranged at the portion corresponding to a portion where the press load per unit area of the upper die 9 in the plane view between the upper die 9 and the slide 4 is small. 上型9とスライド4との間の、平面視における上型9の単位面積あたりのプレス荷重が小さい部分に対応する部分には、平面視における面積が小さく、かつ、縦弾性係数が小さい調節部材152を配設する。 - 特許庁
The thermosetting die-bonding film 3 used for bonding a semiconductor chip to an object to be bonded has an integrated value of tensile storage elastic modulus of 1-50 GPa, in the range of temperature of 25-120°C, after carrying out thermosetting on conditions of 1 hour at 120°C. 半導体チップの被着体への固着に用いる熱硬化型ダイボンドフィルム3であって、120℃、1時間の条件で熱硬化させた後の25〜120℃の範囲での引張貯蔵弾性率の積分値が、1GPa〜50GPaである熱硬化型ダイボンドフィルム3。 - 特許庁
To provide a copolymerized aromatic polyester which, compared with polyethylene-2,6-naphthalenedicarboxylate or the like, can exhibit a lower humidity expansion coefficient if at the same Young's modulus, and has excellent dimensional stability with respect to an environmental change, and to provide a biaxially oriented polyester film using the copolymerized aromatic polyester. ポリエチレン−2,6−ナフタレンジカルボキシレートなどに比べ、同じヤング率ならより低い湿度膨張係数を発現できる、環境変化に対する優れた寸法安定性を有する共重合芳香族ポリエステルおよびそれを用いた二軸配向ポリエステルフィルムの提供。 - 特許庁
A rubber layer 4 whose tensile modulus of elasticity is 30-60 MPa when it is 100% stretched is continuously arranged inside in the radial direction of the tire of the radial carcass layer 2 around a tire equatorial plane with the width of 70-90% to the width of the circumferential belt layer 3. 100%伸張時の引張弾性率が30〜60MPaであるゴム層4が、ラジアルカーカス層2のタイヤ半径方向内側に、タイヤ赤道面を中心として、周方向ベルト層3の幅に対し70〜90%の幅にて、連続的に配置されている。 - 特許庁
To provide a flame-retardant polyester resin composition that exhibits excellent flame retardancy, especially a self-extinguishing property without containing a halogen atom-containing flame retardant and also is excellent in mechanical performance, such as elastic modulus, flexural strength, and impact strength, and a method for producing the same. ハロゲン原子含有難燃剤を含有しなくとも優れた難燃性、特に自己消火性を示し、しかも弾性率、曲げ強度および衝撃強度等の機械的性能に優れた難燃性ポリエステル樹脂組成物およびその製造方法を提供すること。 - 特許庁
To provide a diene-based rubber composition which provides a vulcanizate excellent in processability, and excellent in elongation at break, an elastic modulus, and heat build-up, and therefore is effectively used as a molding material etc., of belt cushion of a pneumatic tire and/or that of an upper soft bead filler. 加工性にすぐれ、破断伸び、弾性率および発熱性にすぐれた加硫物を与えることができ、したがって空気入りタイヤのベルトクッションおよび/または上部軟質ビードフィラーの成形材料等として有効に用いられるジエン系ゴム組成物を提供する。 - 特許庁
To provide an acid-modified polypropylene resin and a resin composition for a prepreg, which have excellent impregnation properties into carbon fibers and adhesiveness with the carbon fibers and which are high in strength and elongation of a matrix phase, in order to provide a composite material for a structural material having drastically enhanced strength and elastic modulus. 強度や弾性率が飛躍的に高い構造材用複合材を提供するために、炭素繊維への含浸性と接着性に優れかつ母相の強伸度が高いプリプレグ用酸変性ポリプロピレン樹脂及び樹脂組成物を提供する。 - 特許庁
The second adhesive layer 9 consists of an insulation resin layer of which a glass transition temperature is 135°C or higher, a linear expansion coefficient is 100 ppm or lower at the glass transition temperature or lower, and an elastic modulus at room temperature is 500 MPa to 2 GPa. 第2の接着剤層9はガラス転移温度が135℃以上で、かつガラス転移温度以下の線膨張係数が100ppm以下であると共に、常温弾性率が500MPa以上2GPa以下である絶縁樹脂層で構成されている。 - 特許庁
A plastic clad optical fiber 1 has a clad layer 3 formed by curing a curable resin composition and arranged on an outer periphery of a core layer 2 composed of quartz glass, and equilibrium elastic modulus of the clad layer 3 is not less than 30 MPa and not more than 35 MPa. 石英ガラスからなるコア層2の外周に、硬化性樹脂組成物を硬化することにより形成されたクラッド層3を設けたプラスチッククラッド光ファイバ1であって、前記クラッド層3の平衡弾性率が30MPa以上35MPa以下である。 - 特許庁
To provide a molding material which has good bending strength, a high thermal deformation temperature and excellent moldability and also has good impact resistance, impact resistance (Charpy impact strength) after retention and high stiffness (bending elastic modulus), and to provide a molded article. 良好な曲げ強度、高い熱変形温度、及び優れた成形加工性といった性能と、更に良好な耐衝撃性と滞留後の耐衝撃性(シャルピー衝撃強度)及び高い剛性(曲げ弾性率)を有する成形材料及び成形体を提供する。 - 特許庁
To provide a molding material which has performance such as high rigidity (flexural elastic modulus), good flexural strength, high thermal deformation temperature, and excellent moldability, and further good impact resistance (Charpy impact strength) and dimensional stability, and to provide a molded article. 高い剛性(曲げ弾性率)、良好な曲げ強度、高い熱変形温度、及び優れた成形加工性といった性能と、さらに良好な耐衝撃性(シャルピー衝撃強度)及び寸法安定性を有する成形材料及び成形体を提供すること。 - 特許庁
The polypropylene cap is made of a resin composition including 70 to 95 wt.% of a homopolypropylene and 5 to 30 wt.% of a modifier composed of a polyolefine-based elastomer, and has a flexural modulus of 800 to 2,000. ホモポリプロピレンを70乃至95重量%、及びポリオレフィン系エラストマーから成る改質材を5乃至30重量%の量で含有する樹脂組成物から成り、曲げ弾性率が800乃至2000の範囲にあることを特徴とするポリプロピレン製キャップ。 - 特許庁
To provide a molding material and a molding having characteristics such as high stiffness (flexural modulus), good flexural strength, high heat distortion temperature, and excellent molding processability, and further good impact resistance (Charpy impact strength), biodegradability, and burning characteristics. 高い剛性(曲げ弾性率)、良好な曲げ強度、高い熱変形温度、及び優れた成形加工性といった性能と、さらに良好な耐衝撃性(シャルピー衝撃強度)、生分解性及び燃焼特性を有する成形材料及び成形体を提供する。 - 特許庁
To provide an acrylic copolymer having a heat resistance equivalent to or more than that of PMMA and sufficiently a high degree of elastic modulus at an ordinary temperature, having a low softening temperature than a thermal decomposition temperature thereof, sufficiently excellent in moldability and also having a sufficiently high impact resistance. PMMAと同等又はそれ以上の耐熱性及び十分に高度な常温弾性率を有し、軟化温度が熱分解温度よりも低く、十分に成形性に優れ、しかも十分に高度な耐衝撃性を有するアクリル型共重合体を提供する。 - 特許庁
To provide a polylactic acid-containing resin composition providing a molded article having excellent flexural modulus and impact strength, hardly causing delamination of the surface at injection molding, and exhibiting excellent ability for inhibiting the generation of aldehydes of volatile materials. 優れた曲げ弾性率と衝撃強度を持つ成形体を形成することができ、しかも射出成形時に表面が剥離せず、揮発性物質であるアルデヒド類に対する優れた発生抑止性能を示すポリ乳酸含有樹脂組成物を提供する。 - 特許庁
To provide a molding material and a molded body, which have performance such as high rigidity (bending modulus of elasticity), good bending strength, and high heat distortion temperature, further good shock resistance (Charpy impact strength), excellent molding processability, and oil adhesion proofness. 高い剛性(曲げ弾性率)、良好な曲げ強度、及び高い熱変形温度といった性能と、さらに良好な耐衝撃性(シャルピー衝撃強度)、優れた成形加工性、及び油分付着防止性とを有する成形材料及び成形体を提供する。 - 特許庁
To provide a carbon fiber-reinforced propylene-based composite material that improves flexural strength while maintaining a good flexural modulus by using a specific modified propylene-based polymer with a reduced amount of a low-crystalline or a low-molecular-weight component; and a molding thereof. 低結晶性又は低分子量成分の量を低減した特定の変性プロピレン系重合体を用いることにより、良好な曲げ弾性率を保持しつつ、曲げ強度の向上した炭素繊維強化プロピレン系複合材料及びその成形体を提供する。 - 特許庁
To provide an epoxy resin composition that gives a resin cured material having a high elastic modulus, high heat resistance and high toughness as a matrix resin for a fiber reinforced composite material, and to provide a fiber-reinforced composite material showing high tensile strength and compressive strength. 繊維強化複合材料用のマトリックス樹脂として高い弾性率と高い耐熱性および高い靭性を示す樹脂硬化物を与えるエポキシ樹脂組成物ならびに高い引張り強度および圧縮強度を示す繊維強化複合材料を提供する。 - 特許庁
To prepare a rubber composition having high adhesiveness to metal, having high modulus and high resistance to set and heat and suitably usable in a composite product consisting of rubber and metal by including highly hydrogenated acrylonitrile-butadiene copolymer rubber. 金属との接着性が高く、高モジュラス、高耐セット性および高耐熱性を有するため、ベルト、タイヤ、ロール、型物等のゴムと金属の複合体、特に真鍮(黄銅)、青銅メッキ鋼板との複合ゴム製品に好適に用いることのできるゴム組成物の提供。 - 特許庁
To provide a liquid resin composition exhibiting good adhesiveness and low modulus of elasticity, and a semiconductor device excellent in reliability such as solder crack resistance by using the liquid resin composition as a semiconductor die-attaching material or an adhesive for a heat dissipation member. 良好な密着性を示すとともに弾性率の低い液状樹脂組成物及び該液状樹脂組成物を半導体用ダイアタッチ材又は放熱部材用接着剤とすることにより耐半田クラック性等の信頼性に優れた半導体装置を提供する。 - 特許庁
To provide a diene-based rubber composition excellent in processability, suitably usable as a vulcanization molding material of a sidewall of a pneumatic tire, etc., and can give a vulcanization-molded article having a high elastic modulus and excellent in fatigue resistance without increasing heating value. 加工性にすぐれ、空気入りタイヤのサイドウォール等の加硫成形材料として好適に使用し得るジエン系ゴム組成物であって、発熱量を増加させることなく、高弾性率を有し、かつ耐疲労性にすぐれた加硫成形品を与え得るものを提供する。 - 特許庁
The hybrid carbon fiber-reinforced composite material 1 comprises carbon fibers of different properties, wherein it comprises a high-modulus carbon fiber 3 and a high-strength carbon fiber 4 and at least one layer each of the two fibers is laminated with its orientation aligned in the same direction. 異なる性質の炭素繊維からなるハイブリッド炭素繊維強化複合材料1であって、高弾性炭素繊維3と高強度炭素繊維4からなり、少なくとも両繊維の各一層の配向方向が同一方向に揃えられて積層されている。 - 特許庁
This method for producing chopped fibers is characterized by using a fiber in 20-50 wt.% water-containing state as a highly elastic fiber in continuously cutting the highly elastic fiber having ≥30,000 MPa tensile modulus of elasticity. 本発明のチョップドファイバーの製造方法は、引張弾性率が30000MPa以上の高弾性繊維を連続的に切断する際に、該高弾性繊維として、20〜50重量%の水分含有状態にある繊維を用いることを特徴とするものである。 - 特許庁
To provide an elastic washer made of polyurethane with meeting the requirements of the compression elastic modulus and initial compression set for elastic washer, exhibiting a small drop of the compression set after a hydrolysis durability test, and a small drop of the fastening force with elapse of the time. 弾性ワッシャーに要求される圧縮弾性率、初期の圧縮永久歪を満足し、かつ加水分解耐久性試験後の圧縮永久歪の低下が小さく、締結力の時間経過による低下の小さなポリウレタン製の弾性ワッシャーを提供する。 - 特許庁
To provide a composition for a raw material of a glass fiber for manufacturing the glass fiber, capable of obtaining the glass fiber high in strength and modulus of elasticity, restricting spinning temperature to low, and also sufficiently widening a processing temperature range. ガラス繊維の製造に用いられる原料配合物であって、強度及び弾性率の高いガラス繊維を得ることができ、紡糸温度を低く抑えて作業温度範囲を充分に広くすることも可能なガラス繊維用原料配合物を提供すること。 - 特許庁
To actualize a level of a pencil hardness of 3H-4H by controlling an elastic modulus in a specific range without altering a film thickness of a hard coat layer when producing a functional film provided with a functional inorganic membrane on the surface thereof. 機能性無機薄膜層を表面に設けた表面硬度に優れる機能性フィルムを製造するのに、ハードコート層の膜厚を変えることなく、その弾性率を特定の範囲に制御することによって、鉛筆硬度が3H〜4Hの水準を実現すること。 - 特許庁
To provide a frequency synthesizer which is capable of shortening a lockup time and reducing power consumption simultaneously by reducing the lower limit of the setting range of the total number of division frequencies and increasing a reference frequency, while keeping the modulus of a prescaler high. プリスケーラのモジュラスを大きく維持したまま、可変分周器の総分周数の設定範囲の下限を低減させて基準周波数を高くすることで、ロックアップタイムの短縮と消費電力の削減とを両立する周波数シンセサイザ、を提供する。 - 特許庁
The difference of elongation for fracture is given between the tension members 4 by making one tension member 4 and the other tension members 4 different in one of elastic modulus, elongation at fracture points, strength at fracture points, and excess length. そして、抗張力体4の破断時の差を、抗張力体の弾性率、破断点の伸び、破断点の強度、余長の何れか1つを一方の抗張力体4と他方の抗張力体4で異ならせることで、各抗張力体に破断時の差を持たせる。 - 特許庁
The car seat member is produced by using a polyolefin resin composition which contains 0.3-5 mass parts of titanium dioxide and 0.03-2 mass parts of black pigment based on 100 mass parts of polyolefin and has a flexural modulus of at least 900 MPa. ポリオレフィン樹脂100質量部に対して0.3〜5質量部の二酸化チタン及び0.03〜2質量部の黒色顔料を含んでなり、曲げ弾性率が900MPa以上である、ポリオレフィン樹脂組成物を用いて自動車シート部材を製造する。 - 特許庁
A conductive electrode pattern is formed on the tubular front surface made of high polymer materials, one or more electrode protecting layers are formed on it, and the outermost peripheral layer of the electrode protecting layers is constituted of a material having tensile elastic modulus of not less than 300 MPa. 高分子材料の管状物表面に、導電性を有する電極パターンを形成し、その上に1層以上の電極保護層を形成し、この電極保護層の最外周層を引張弾性率300MPa以上の材料で構成する。 - 特許庁
The optical compensation sheet has an optical anisotropic layer made of a composition containing a liquid crystal compound on a transparent support made of polymer film such as cellulose acylate film, wherein elastic modulus in at least one direction of the transparent support is 3 GPa or less. セルロースアシレートフィルム等のポリマーフィルムからなる透明支持体上に液晶化合物を含む組成物からなる光学異方性層を有する光学補償シートであって、該透明支持体の少なくとも一方向の弾性率が3GPa以下である光学補償シート。 - 特許庁
To prepare a cellulose ester film suitable for a polarizing plate-protecting film in a liquid crystal image-display device, and the like, which has a high elastic modulus, can suppress shrinkage of the polarizing plate and is excellent in flatness, and a manufacturing method therefor. 液晶画像表示装置における偏光板用保護フィルムなどに好適なセルロースエステルフィルムの弾性率を高くすることができて、偏光板の収縮を抑制することができる、平面性に優れたセルロースエステルフィルム及びその製造方法を提供する。 - 特許庁
To prevent the disconnection of wiring or retard its progress due to thermal stress caused by a difference between the linear expansion coefficient and the Young's modulus of a sealing material and a mounting board when the sealing material is filled into a gap formed between the semiconductor device and the mounting board. 半導体装置と実装基板の間に形成された間隙に封止材を充填した際の、封止材と実装基板の線膨張係数および弾性係数の相違に起因した熱応力による配線の断線を防止、あるいはその進行を遅らせる。 - 特許庁
The stretched thermoplastic polyester resin sheet has 9 GPa or more of a elastic modulus in the stretching direction and 3.5% or more of breaking extension in the stretching direction and right angle direction measured in conformity to the JIS K 7113 tensile test method. JIS K 7113の引張試験方法に準拠して測定した、延伸方向の弾性率が9GPa以上であり、延伸方向と直角方向の破断伸びが3.5%以上であることを特徴とする延伸熱可塑性ポリエステル系樹脂シート。 - 特許庁
To provide a dipped product which improves modulus and gas barrier properties while maintaining the tensile strength and the elongation of a film, and can obtain, above all in gloves, a feeling of wearing and removability equal to or more than the gloves made of a vinyl chloride resin. 皮膜の引張強さや伸び率を維持しつつ、モジュラスと気体の遮断性とを向上させることができ、とりわけ手袋においては、塩化ビニル樹脂製の手袋と同等またはそれ以上の装着感や着脱性を得ることのできる浸漬製品を提供する。 - 特許庁
Since the interaction of the coarse lattice nonwoven fabrics 5 and that of the fine lattice nonwoven fabrics 4 are sufficiently obtained when an impact is applied to the sandwich structure 1, the elastic modulus and impact energy absorbing characteristics of the sandwich structure 1 are enhanced. サンドイッチ構造体1に衝撃が加わった際における粗格子不織布5同士の相互作用、および微細格子不織布4同士の相互作用が充分に得られるので、サンドイッチ構造体1の弾性率および衝撃エネルギー吸収特性が高くなる。 - 特許庁
To provide a two-component system polyurethane sealing material that facilitates the mixing work on mixing operation in no need of plasticizer for softening with reduced occurrence of bubbles after curing and reduced staining on the coated surfaces and gives low modulus and high elongation and excellent cold curing behavior. 可塑剤による軟化を必要とせず、混合作業時の混合容易性を与え、硬化後に発泡が少なく、塗装表面の汚染が少なく、低モジュラス、高伸度性を与え、低温硬化性に優れる2成分形ポリウレタン系シーリング材を提供する。 - 特許庁
The modulus of viscoelasticity of the toner becomes within a range suitable for the fixation even when the fixing temperature is lower than that in the conventional manner, and the toner is properly deformed by heating and pressuring, and excellently fixed without causing toner offset and faulty fixation in a wide fixing temperature range. 定着温度が従来に比して低くてもトナーの粘弾性率が定着に適した範囲となり、加熱及び加圧によってトナーが適度に変形し、広い定着温度領域でトナーオフセットや定着不良がなく良好に定着することができる。 - 特許庁