「ROM.」を含む例文一覧(6252)

<前へ 1 2 .... 93 94 95 96 97 98 99 100 101 .... 125 126 次へ>
  • When a battery pack 3 is connected to a charger 2, a microcomputer 17 requests a microcomputer 15 to send ID information and checks the ID information sent from the microcomputer 15 against the ID information stored in the ROM of the microcomputer 17f.
    電池パック3が充電装置2に接続されると、マイコン17は、マイコン15に対してID情報の送信要求を行い、マイコン15から送信されたID情報とマイコン17のROMに記憶されているID情報を照合する。 - 特許庁
  • A three-dimensional image processing part arranges objects related to an armadillo 64 in a world coordinate system which is a virtual three-dimensional space, discriminates a gorilla 61 as discrimination result, and reads out the relative coordinates related to the gorilla 61 from a movement table in a program ROM.
    3次元画像処理部は、アルマジロ64に関するオブジェクトを仮想3次元空間であるワールド座標系に配置して、判別結果であるゴリラ61を判別して、ゴリラ61に関する相対座標をプログラムROM内の動作テーブルから読み出す。 - 特許庁
  • The set data is acquired from the ROM or the like of the selected printer to update the set data of the color laser printer (S140) and the set data updating date is superscribed on the basis of date having performed this initializing processing (S150).
    そして、この選定されたプリンタのROMなどから設定情報を取得してカラーレーザプリンタの設定情報を更新すると共に(S140)この初期設定処理を実行した日時で設定情報更新日時を上書きする(S150)。 - 特許庁
  • With a reset signal from an external reset circuit, a transfer setting circuit 51 initializes the CPU 10 and outputs a cycle/burst select signal for selecting burst transfer and a transfer start signal to a ROM option control circuit 52.
    外部リセット回路からのリセット信号に基づき、転送設定回路51がCPU10を初期状態にすると共にバースト転送を選択するためのサイクル/バースト選択信号及び転送スタート信号をROMオプション制御回路52へ出力する。 - 特許庁
  • Also, when a defective place is specified, a program performing decoding of data is provided previously in a computer, it can be analyzed which bit of the ROM 4 is defective by decoding the data to a state before ciphering using the program.
    また、不良個所の特定を行う場合には予めデータの復号を行うプログラムをコンピュータ上で用意しておき、そのプログラムを用いてデータを暗号化前の状態に復号することによりROM4のどのビットが不良かを解析できる。 - 特許庁
  • The state checking part 241 of the flash memory part 221 enables a multiplexer 262 to write on the conditions that data are not written to the NOR-type flash memory 204 and a mode selection signal line 209 designates ROM writing.
    フラッシュメモリ部221の状態確認部241はNOR型フラッシュメモリ204にデータが書き込まれていないことおよびモード選択信号線209がROM書きを指定していることを条件としてマルチプレクサ262が書き込みを可能にする。 - 特許庁
  • To provide a designing method for semiconductor integrated circuit, which can easily transit to a corrected logic simulation and can easily manage the version of stored data as well when the stored data in a ROM module are corrected in logic design.
    論理設計時にROMモジュールの格納データを修正した場合に、容易に修正後の論理シミュレーションへ移行することが可能であり、格納データのバージョン管理も容易な半導体集積回路の設計方法を提供することにある。 - 特許庁
  • A sub ROM of a Pachinko slot machine has a performance table storing the plurality of game states (such as an internal winning symbol combination), performance images corresponding to the respective game states, and a plurality of bodily feeling patterns corresponding to the respective performance images.
    パチスロのサブROMは、複数の遊技状態(内部当籤役等)及び当該遊技状態のそれぞれに対応する演出画像、並びに、演出画像のそれぞれに対応付けられた複数の体感パターンを記憶する演出テーブルを有している。 - 特許庁
  • The software is provided and distributed to users through electronic media such as a CD-ROM and a communication line, so forms are not main materials unlike a paper-made advertisement name included calendar, which reduces an environmental load and is useful for environmental preservation.
    また使用ユーザーに対してCD−ROM等の電子媒体や通信回線にて、本発明のソフトの配給、配信をおこなう為、紙製広告名入れカレンダーのように用紙を主材料とせず、環境負荷が少なく、環境保全に役立つ。 - 特許庁
  • The automobile electronic controller compiles the currently received writing data and the previously temporarily stored writing data into data of rewriting region size (256 bytes) and rewrites a built-in flash ROM (flash memory) according to the received address.
    自動車用電子制御装置は、今回受け取った書き込みデータと、先に一時的に保存しておいた書き込みデータとをまとめて、書き換え領域サイズ(256byte)のデータとして、受け取ったアドレスに応じて、内蔵するフラッシュROM(フラッシュメモリ)の書き換えを行う。 - 特許庁
  • When a digital camera having a wireless communication function and a wired connection function and a printer are wired-connected (S1001), the digital camera acquires wireless setting information from the printer (S1005) and registers the acquired wireless setting information into a flash ROM.
    無線通信機能及び有線接続機能を有するデジタルカメラとプリンタと有線接続すると(S1001)、デジタルカメラはプリンタから無線設定情報を取得し(S1005)、取得した無線設定情報をフラッシュROMに登録する。 - 特許庁
  • A door control device 5 reads a speed command value corresponding to a position of the door from a ROM 8 based on an output of a pulse encoder 4, compares the command value with a real speed value, and controls a door motor 1 by a gate signal generation circuit 14 and a power circuit 2.
    ドア制御装置5はパルスエンコーダ4の出力から、扉の位置点に対応する速度指令値をROM8から読み出すとともに、実速度値と比較してゲート信号発生回路14及びパワー回路2を介してドアモータ1を制御する。 - 特許庁
  • Then the communication section 15 can transmit the second image information stored in the ROM to another second facsimile machine for designating the same N value as the N value as to the second image information transmitted to one of the second facsimile machines.
    そして、通信部15は、1台の第2ファクシミリ装置に送信した第2画像情報についてのN値と同じN値を指定するさらに他の第2ファクシミリ装置に対して、ROMに記憶された第2画像情報を送信可能である。 - 特許庁
  • In the sound data ROM 234 of a pachinko game machine 10, performance sound data for making a speaker 46 generate the performance sound at the time of variable display and the performance sound data for making the speaker 46 generate sound effects 1-4 are recorded.
    パチンコ遊技機10の音声データROM234には、スピーカ46に可変表示時演出音を発生させるための演出音データ、及びスピーカ46に効果音1から4を発生させるための演出音データが記録されている。 - 特許庁
  • The specific processor 101 is provided with a ROM 102 as a memory for storing a first boot program and a first main program which are executed by the specific processor 101 and a second boot program and a second main program which are executed by the other processor 104.
    特定プロセッサ101は、特定プロセッサ101が実行する第1のブートプログラムと第1のメインプログラム及び他のプロセッサ104が実行する第2のブートプログラムと第2のメインプログラムを格納するメモリとしてROM102を備える。 - 特許庁
  • The internal memory of the nature sound semiconductor ROM chip is divided into about 6 sections, the listener can externally select any of the sections by using pushbutton switches S1-S6 and the chip inside is configured so that various different nature sounds can respectively be endless for the listening operation.
    環境音半導体ROMチップは内部メモリーを6分割程度のセクションに分けて外部から押しボタンスイッチS1〜S6で選択できるようにして各種の異なった環境音がそれぞれエンドレス動作になるようにチップ内部を構成した。 - 特許庁
  • At acquiring inputted key information 62, a center server 12 refers to CD-ROM distribution information 16C, and extracts the data pertinent to the acquired key information 62 from the personal history database 16B, and transfers the data to the enterprise side terminal 72.
    入力されたキー情報62をセンタサーバ12が取得すると、CD−ROM配布情報16Cを参照し、取得したキー情報62に該当するデータを履歴書データベース16Bより抽出して企業側端末72に転送する。 - 特許庁
  • When an ECU 18 is manufactured, the resistance value Rs of the driving force transmitting device composing this driving force transmission control device with combination of the ECU 18 in every ECU 18 is recorded in the ROM 18h of the ECU 18.
    そして、ECU18の製造時に、個々のECU18毎に、そのECU18と組み合わせて駆動力伝達制御装置を構成する駆動力伝達装置の前記抵抗値Rsを、そのECU18のROM18hに記録させておく。 - 特許庁
  • A program storage region 8b is set to the flash memory 8 for storing image data separately from a data storage region 8a, where the control program for driving and controlling the CPU is stored in advance for eliminating an exclusive ROM.
    画像データ格納用のフラッシュメモリ8にデータ格納領域8aとは別にプログラム格納領域8bを設定し、ここにCPUを駆動制御する制御プログラムを予め格納して専用のROMを省略することを特徴とする。 - 特許庁
  • To provide a device and a method for equipment control which can control the operations of different kinds of equipment according to driver software without replacing a ROM mounted on a CPU substrate to control the operations of the equipment.
    機器の動作を制御するためのCPU基板上に搭載されているROMの交換などを行うことなく、ドライバソフトウェアに基づいて複数の種類の機器の動作を制御することが可能な機器制御装置および機器制御方法を提供する。 - 特許庁
  • A CPU 3 receives relative position information between a flow regulating valve 13 and a slide closure 14 from the position detecting part 16 of an encoder 9b and then judges a flow rate based on a position-flow corresponding table provided on a ROM 5 (step S4).
    CPU3は流量調整弁13とスライド閉止14の相対位置情報をエンコーダー9bの位置検出部16から受け、ROM5に備えられた位置−流量対応テーブルに基づいて流量を判定する(ステップS4)。 - 特許庁
  • An auxiliary IC 145 reads out compressed image data stored in a ROM 151 through a dedicated bus 152 instead of a CPU 140, decodes the read image data, and transfers the data to the CPU 140 through a local bus.
    補助IC145は、CPU140に代わってROM151に記憶されている圧縮された画像データを専用バス152を介して読み出し、この読み出した画像データを復号化してから、ローカルバスを介してCPU140に転送する。 - 特許庁
  • When the power of the information processor 1 is applied, the CPU 10 checks whether or not there is an error in the registry information in one of the regions, for example, the registry information on the A side, of the Flash ROM 12 which stores the registry information.
    情報処理装置1の電源が投入されると、CPU10は、レジストリ情報を記憶したFlash ROM12の領域のうちの1つの領域のレジストリ情報、たとえばA面のレジストリ情報にエラーがあるか否かをチェックする。 - 特許庁
  • The image processing device is composed of a page buffer, an engine, a font cache memory for temporarily caching font images corresponding to character codes, a receiving buffer, a font ROM 11 and HDD 12 storing fonts, a character generation unit, a character management unit, and a control unit.
    ページバッファ、エンジン、文字コードに対応するフォントイメージを一時的にキャッシュするフォントキャッシュメモリ、受信バッファ、フォントが入っているフォントROM11及びHDD12、文字生成部、文字管理部、制御部から構成される画像処理装置である。 - 特許庁
  • A hard disk controller 60 divides a magnetic disk 74 of a hard disk unit 70 into the ROM area 74a and the RAM area 74b, and the wireless type hard disk 10 is recognized by an external device as a SCSI device having two logic units.
    ハードディスクコントローラ60は、ハードディスクユニット70の磁気ディスク74をROM領域74aとRAM領域74bとに分け、外部装置に本無線式ハードディスク10を2つの論理ユニットを有する一つのSCSIデバイスとして認識させる。 - 特許庁
  • The CPU loads a setting change program stored in the ROM and data necessary for executing the program to the RAM, and executes processing for easily changing various settings according to attachment or detachment of a panel in accordance with the setting change program.
    CPUは、ROM内に記憶された設定変更プログラムおよびプログラムの実行のために必要なデータを、RAMへロードし、設定変更プログラムに従って、パネルの着脱にともない各種設定を容易に変更する処理を実行する。 - 特許庁
  • When a digital camera having a radio communication function and a wired connection function and a printer are connected by a wire (S1001), the digital camera acquires radio setting information from the printer (S1005) and registers the acquired radio setting information in a flash ROM.
    無線通信機能及び有線接続機能を有するデジタルカメラとプリンタと有線接続すると(S1001)、デジタルカメラはプリンタから無線設定情報を取得し(S1005)、取得した無線設定情報をフラッシュROMに登録する。 - 特許庁
  • To provide a holographic ROM system which increases write and read efficiencies by using a refractive material and makes the refractive material easily fixable and replaceable in order to achieve angular multiplexing.
    屈折物質を用いることによって書き込み及び読み出しの効率を増加させるとともに、その屈折物質を角多重化(angular multiplexing)のために容易に固定及び取り替えできるようにしたホログラフィックROMシステムを提供すること。 - 特許庁
  • A digital processing circuit 11 and a latch circuit 12 are formed on a single semiconductor substrate by being integrated with a CD-ROM decoder 19 composed of an input interface circuit 13, an error correcting/detecting circuit 14 and an output interface circuit 15.
    デジタル処理回路11及びラッチ回路12を、入力インタフェース回路13、誤り訂正/検出回路14及び出力インタフェース回路15からなるCD−ROMデコーダ19と共に単一の半導体基板上に集積化して形成する。 - 特許庁
  • The state transition type communication processing apparatus limits sizes of programs loaded to the internal RAM 409 to only modules related to respective states in all sequences to arrange a large-capacity communication program in an external ROM 408.
    状態遷移型通信処理装置において、内部RAM409にロードされるプログラムサイズを、全シーケンスのなかで各状態に関連したモジュールのみに限るようにして、大容量の通信処理プログラムを外部ROM408に配置する。 - 特許庁
  • Furthermore, the microcomputer 60 receives an audio input from an audio input line 82 via a selector 84, a DA/AD converter 86, and a memory controller 8, an MPEG processing section 62 applies MPEG compression processing to the audio input and the flush ROM 66 stores the processed audio input.
    また、オーディオ入力ライン82からのオーディオ入力をセレクタ84、DA/AD変換器86、メモリコントローラ8を介してマイコン60に入力し、MPEG処理部62でMPEG圧縮処理した後、フラッシュROM66に格納する。 - 特許庁
  • A control circuit 25 sequentially reads out the second data for performances corresponding to a performance pattern shown by display directive information being outputted from a display control circuit 21 sequentially from the ROM 27 to be loaded sequentially into prescribed addresses of a RAM 26.
    制御回路25は、表示制御回路21から出力される表示指示情報で示されている演出パターンに対応する第2の演出用データをROM27から順次読み出して、RAM26の所定のアドレスに順次書き込む。 - 特許庁
  • A portable telephone terminal has in a ROM 8 a telephone book list for registering telephone numbers to be dialed and an incoming call rejection list for registering telephone numbers of incoming calls whose ringing times are shorter than a threshold as objects of incoming call rejection.
    通話対象の電話番号を登録しておくための電話帳リストおよび呼出時間が閾値以下の着信呼を着信拒否対象の電話番号を登録しておくための着信拒否リストを自携帯電話端末のROM8内に備える。 - 特許庁
  • A ROM 2707 obtains a predetermined coefficient from among coefficients determined by pre-learning on the basis of the features of the representative vector, and a filter 2704 restores data of the block, in which the error is present, on the basis of the predetermined coefficient and the representative vector.
    ROM2707は、予め学習することにより決定されている係数の中から、所定の係数を、代表ベクトルの特徴に基づいて取得し、フィルタ2704は、その所定の係数と、代表ベクトルに基づいて、エラーが存在するブロックのデータを復元する。 - 特許庁
  • To provide a method or a corresponding device for controlling memory access in which the certain number of standby states is determined about a central controller (CPU) for performing memory access to memory devices (FLASH/ROM, RAM, IO module).
    本発明は、メモリ装置(FLASH/ROM、RAM、IOモジュール)にメモリアクセスするために、中央制御装置(CPU)についてある数の待ち状態が決定される、メモリアクセスを制御するための方法もしくは対応する装置に関する。 - 特許庁
  • The conversion module 20 applies a correction operation to the table value TB read from the ROM 30 and outputted by the CPU 10, and writes the corrected table value CTB into a table value of a lookup table (LUT) belonging to a macro 40.
    この変換モジュール20は、CPU10によってROM30から読み込まれて出力されるテーブル値TBに対して補正演算を施しつつその補正されたテーブル値CTBをマクロ40の持つLUTのテーブル値に書き込むモジュールである。 - 特許庁
  • To provide a tracking servo control device which adjusts spacing between beams by using a rotatable diffraction lens so as to perform tracking servos by DVD-ROM and DVD-RAM methods differing in track pitch, and to provide a control method therefor.
    本発明はトラックピッチが異なるDVD−ROMとDVD−RAMにDPP法でトラッキングサーボを行うようにビーム同士の間隔を回転可能な回折レンズを利用して調整するトラッキングサーボ制御装置、制御方法に関する。 - 特許庁
  • The waveform pattern, where a voltage component with a harmonic component contained in the induced voltage being set to positive torque is superposed onto the application voltage of the motor 4 in advance, is obtained, and the waveform patterns corresponding to various kings of motors are stored at a ROM 10a.
    予め誘起電圧に含まれる高調波成分を正トルクとするような電圧成分をモータ4の印加電圧に重畳した波形パターンを求め、かつ種々モータに対応した波形パターンを求めてROM10aに記憶している。 - 特許庁
  • When the word card 8 is inserted into an insertion part 16, a word pronunciation data 37 corresponding to a word number read by an optical sensor 39 is retrieved and outputted from the word ROM chip 35, and voices are output from a loudspeaker 43.
    単語カード8をカード挿入部16に挿入すると、光学センサ39によって読み取られた単語番号に対応する単語発音データ37が単語ROMチップ35から検索出力され、スピーカ43から音声出力される。 - 特許庁
  • A cipher collating circuit 25 compares comparison cipher data D2 inputted to an input circuit 21 with regular cipher data D1 in a ROM 27 and a function recovery circuit 26 recovers the function of the IC chip 2 when both match each other.
    入力回路21に入力された比較暗号データD2とROM27内の正規暗号データD1とを比較する暗号照合回路25を設け、両者が一致したときにICチップ2の機能を回復させる機能回復回路26を設ける。 - 特許庁
  • To provide a receiver for demodulating a wide band received signal with a ROM with a small capacity which can be loaded on a DSP.
    広いダイナミックレンジのA/D変換器でディジタル化した広帯域受信信号を、ROMに記憶された演算テーブルを用いてPM復調するには、必要なROMの容量が大きすぎて、DSPのROMに演算テーブルを搭載することが不可能である。 - 特許庁
  • To provide a semiconductor integrated circuit in which setting of reference voltage generated by a constant voltage generating circuit can be change even after a sealing process when information stored in a reference voltage information storing ROM is change.
    基準電圧情報格納ROMに記憶させる情報を変更するとき、封止工程後でも、定電圧発生回路が発生する基準電圧を、設定変更することができる半導体集積回路を提供することを目的とする。 - 特許庁
  • Therefore, it is easily discriminated whether the increase of laser current value is caused by the service life of the laser diode or the fault, damage and the like of electronic parts in the laser unit by analyzing maintenance data of the laser unit stored in the flash ROM 104.
    よってフラッシュROM104に記憶されたレーザユニットの保守用データを解析することによって、レーザ電流値の増大の原因をレーザダイオードの寿命とレーザユニット内の電子部品の故障・破壊等とで容易に判別することが可能になる。 - 特許庁
  • Detection values, obtained from a developer concentration sensor 24, an optical sensor 75 and an optical sensor 85 in a color image-forming unit or an operation signal from a photoreceptor/developing motor 25 are compared with predetermined values stored in a ROM, to determine the failure of the color image-forming unit.
    カラー作像ユニットにおける現像剤濃度センサ24、光学センサ75、光学センサ85からの検出値又は感光体・現像モータ25からの動作信号とROMに記憶された所定値とを比較し、カラー作像ユニットの故障を判断する。 - 特許庁
  • Thus, even when the address information of the register 32 is rewritten due to the influence of a noise, it is possible to return this address information to the initial value, and to prevent any unexpected data from being written in the ROM area 12 afterwards.
    これにより、ノイズの影響でレジスタ32のアドレス情報が書き換えられた場合であっても、これを初期値に戻すことができるため、以降、ROM領域12への意図しないデータの書き込みが行われてしまうことを防止できる。 - 特許庁
  • To provide a read-only optical information recording medium which has a suitable reflectivity as a reflection film of an optical information recording medium (for example, BD-ROM), is excellent in reproduction stability, and has an extremely durable reflection film.
    光情報記録媒体(例えばBD−ROM)の反射膜として適切な反射率を示すと共に、再生安定性に優れ、かつ耐久性にも極めて優れた反射膜を備えた、読み出し専用光情報記録媒体を提供する。 - 特許庁
  • When a wireless memory card 200 is registered in a server 400, a public key Ke404 for encrypting key data is stored in a memory 403 while a secret key Kd54 for decrypting the key data encrypted by the public key Ke404 is stored in a BIOS-ROM 17.
    サーバ400に無線メモリカード200を登録する際に、鍵データを暗号化する公開鍵Ke404をメモリ403に、公開鍵Ke404で暗号化された鍵データを復号化する秘密鍵Kd54をBIOS−ROM17に記憶する。 - 特許庁
  • In a controller 1, a ROM write-mode setting register 10 for setting ON/OFF modes of the switches 11-1 to 11-N is provided, and the switches 11-1 to 11-N are set to ON modes when a program is written into a memory array 2 by using sockets.
    コントローラ1に、スイッチ11−1〜11−NのON/OFFモードを設定するROM書きモード設定用レジスタ10を設け、ソケットを使用してのメモリアレイ2へのプログラムの書き込み時に、スイッチ11−1〜11−NをONモードとする。 - 特許庁
  • Operation commands corresponding to input operations via a key input part 4 are bundled by a CPU 62, a ROM 64, and a RAM 66 to generate an operation command sequence from the series of input operations, and the sequence is recorded in a command reproduction buffer 66B.
    CPU62、ROM64及びRAM66により、キー入力部4を介した各入力操作に対応する各操作コマンドが連ねられて一連の入力操作から一の操作コマンド列が生成され、コマンド再生バッファ66Bに記録される。 - 特許庁
  • In this information processor 1, a failure check program storage region 13b of an ROM 13 on a mother board 11 different from a hard disk 24 is made to store a failure check program, and when the device is started, the failure check program is executed.
    情報処理装置1において、ハードディスク24とは別個のマザーボード11上のROM13の障害点検プログラム記憶領域13bに障害点検プログラムを記憶させ、装置の起動時にこの障害点検プログラムを実行する。 - 特許庁
<前へ 1 2 .... 93 94 95 96 97 98 99 100 101 .... 125 126 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.