「STRESS」を含む例文一覧(22485)

<前へ 1 2 .... 318 319 320 321 322 323 324 325 326 .... 449 450 次へ>
  • After the weld overlay material is put to the bucket tips by means of multiplex calipers in order, the buckets are removed, stress is eliminated 60, and the weld overlay material is machined, so that the repaired tenon is formed.
    バケット先端に対して多重パスでかつ順次に溶接肉盛材料を施工した後に、バケットは、取外され、応力除去(60)され、溶接肉盛材料が機械加工されて改修したテノンを形成する。 - 特許庁
  • To provide a substrate for optical fiber alignment and an optical fiber array capable of advantageously preventing increase in transmission loss, damage, disconnection or the like of an optical fiber caused by stress concentration generated at a tip part of the optical fiber.
    光ファイバの先端部位で生ずる応力集中に起因した光ファイバの伝送損失の増大や損傷、断線等の発生を有利に防止し得る光ファイバ整列用基板と光ファイバアレイを提供する。 - 特許庁
  • Thus, the generation of the internal stress of the sensor can be suppressed in spite of a difference in thermal expansion between the glass substrate and selenium, and a deterioration in a selenium film and a reduction in photoresponsiveness caused by a temperature change or the like can be suppressed.
    これにより、ガラス基板とセレンとの熱膨張差にかかわらず、センサの内部応力の発生が抑えられ、温度変化等によるセレン膜の劣化や光応答性の低下を抑えることができる。 - 特許庁
  • Though the force applied for fixing the standard plate acts on the outer peripheral section of the standard plate, the reference plane on the inside of the low-rigidity section is hardly deformed, because stress concentration is caused in the low-rigidity section by the force.
    基準板の固定のための力が基準板の外周部に作用するが、この力により低剛性部に応力集中が生じ、その低剛性部の内部にある基準平面には変形が殆ど生じない。 - 特許庁
  • For example, when the width of the threshold voltage distribution is made to be smaller with the increase of the interval of the threshold voltage distribution by the instruction of a writing command, voltage stress due to writing can be reduced to improve the reliability in information security.
    例えば、書込み用コマンドの指示により閾値電圧分布の間隔を大きくするほど、閾値電圧分布の幅を小さくすれば、書込みによる電圧ストレスを小さくでき、情報保持の信頼性が高くなる。 - 特許庁
  • To improve strength and bending rigidity of the rear side without generating high tensile stress at the sealing portion in a housing used for an FED or the like, and improve mechanical strength of the whole housing, and solve various problems due to exposure of the side part of the rear support structure.
    FED等に用いる外囲器において、封着部に高い引張応力を発生させることなく背面側の強度と曲げ剛性を向上させ、外囲器全体の機械的強度の向上を図る。 - 特許庁
  • To provide a circumferential-directional strength measuring instrument for a fuel sheath tube, capable of measuring the stress/strain characteristics, when a circumferential-directional load is applied in the irradiated fuel sheath tube of a light water type nuclear reactor, using a remote operation.
    照射された軽水型原子炉用の燃料被覆管の円周方向負荷時の応力−ひずみ特性を遠隔操作によって測定できる燃料被覆管の円周方向強度測定装置を提供する。 - 特許庁
  • When a force in a direction where component lands 18 are bent is imposed on the flexible printed wiring board 10, stress is concentrated on the opening edge 22 of an opening 20 in a cover lay 14 so as to allow the component lands 18 to be almost disconnected.
    フレキシブルプリント配線板10に部品ランド18を折り曲げる方向の力が負荷されると、カバーレイ14の開口部20の開口縁22に応力が集中し、部品ランド18が断線しそうになる。 - 特許庁
  • To provide a reinforcement material and reinforcement method of a concrete column body, which allows a portion of a concrete column body exhibiting a large bending stress to be efficiently, easily, and reliably reinforced without restriction from the surrounding environment.
    周辺環境の制約を受けることなく、コンクリート柱体に大きな曲げ応力の作用する部分を、効率的に容易かつ確実に補強できるコンクリート柱体の補強材および補強方法を提供する。 - 特許庁
  • Thus, the difference in the coefficient of thermal expansion is suppressed between the intermediate layer 30 including the CrN layer 34 and the cBN film 50 including the cBN layer 54, and separation of the cBN film 50 caused by the thermal stress can be prevented.
    従って、CrN層34を含む中間層30と、cBN層54を含むcBN膜50と、の間における熱膨張差が抑制され、熱応力によるcBN膜50の剥離が防止される。 - 特許庁
  • Therefore, even if an envelope is formed covering the element 1 later, expansion or shrinkage stress of the envelope due to the change in temperature does not work on the light-emitting surface 8, and the deterioration of optical output characteristic is also prevented.
    よって、この後発光素子1を覆うように外囲器を形成した際にも、外囲器の温度変化による膨張又は収縮応力が発光面8に作用せず、光出力特性の劣化が防止される。 - 特許庁
  • Another antifouling chemical for the receptacle pan is characterized by containing natural saccharides and/or natural proteins of a compressive stress of at least 150 g, measured by a rheometer, in a concentration of at most 20 mass% at 25°C.
    また、他のグリル受け皿汚れ防止剤は、25℃において20質量%以下の濃度で押圧応力が150g以上となる天然多糖類及び/又は天然タンパク質を含有することを特徴とする。 - 特許庁
  • The pipes are each formed of a material having a yield stress σ_ys of 200 MPa or more and a pipe strength (2(t/D)σ_ys) of 5-15.5 MPa, desirably, where t is a pipe thickness (mm) and D is a pipe outer diameter (mm).
    前記パイプは、降伏応力σ_ysが200MPa以上の材質からなり、パイプ強度(2(t/D)σ_ys)が5〜15.5MPaであるのが望ましい(tはパイプ肉厚(mm)、Dはパイプ外径(mm))。 - 特許庁
  • The steel wire is such one that the circumferential surface thereof is plated with brass, wherein the roundness of the wire circumferential surface as the substrate of the plated brass is brought to ≤1.50 μm and the surface residual stress on the wire circumferential surface is applied on the compressed side.
    ワイヤの周面にブラスめっきを施したスチールワイヤにおいて、該ブラスめっきの下地であるワイヤ周面の真円度を1.50μm以下に、かつ該ワイヤ周面における表面残留応力を圧縮側とする。 - 特許庁
  • To effectively absorb an aftershock of a hit ball, avoiding the depletion of stress of the hit ball, simplifying the assembling of a weight, improving the comfortable feeling when grabbing a club, improving the accuracy of the hit ball and secure the performance of the hit ball as a whole.
    打球の余振を有効に吸収し、打球の応力の減損を避け、重りの組立を簡単にし、クラブの握持の快適感を増やし、打球の正確性を高め、さらに全体の打球の性能を確保する。 - 特許庁
  • Thereby position of the temperature element 103 can be displaced by abundance of the air gap 105 to reduce the stress imposed on the joint 110 even if cold cycle repeatedly arises in the temperature sensor 100.
    これにより、温度センサ100に冷熱サイクルが繰り返し生じた場合にも、空隙105の存在分だけ感温体103の位置が変位可能となり、接合部110に係る応力を緩和させられる。 - 特許庁
  • In this way, according to a blast furnace operation, the stuck material 11 functioned as the heat insulating wall on the step part 10, can be piled up and stuck, and the heat stress acted on the lower end surface of the copper stave 3 can be mitigated.
    これにより、高炉操業に伴って、段部10上に断熱壁として機能する付着物11を堆積付着させることができ、銅ステーブ3の下端面に作用する熱応力を緩和することができる。 - 特許庁
  • The deformation quantity of the expanded parts 122a increases and the deformation quantity of the narrow width parts 122b reduces, as a result, the stress concentration on the boundary of the expanded width parts 122a and the narrow width parts 122b is relaxed.
    拡幅部122aの変形量が増加した結果、狭幅部122bの変形量は減少し、結果として拡幅部122aと狭幅部122bとの境界における応力集中が緩和される。 - 特許庁
  • The surface of the part 110 within the surface treated region 136 is in a condition of residual compressive stress to prevent crack initiation at the boundary between the treated patch 132 and the remainder of the part 110.
    処理パッチ132と部品110の残る部分との境界における亀裂の始まりを妨げるように、表面処理領域136の内側における部品110の表面は、残留圧縮応力の状態にある。 - 特許庁
  • The stress sensitive element is constituted of: a crystal being the piezoelectric material; a vibration arm 20; and a beam 10b which is connected with both the ends of the vibration arm 20 through connecting parts 10a, 10c which are integrally formed with the vibration arm 20.
    圧電材料である水晶によって構成され、振動腕20と、この振動腕20と一体形成され、連結部10a、10cを介して振動腕20の両端に接続される梁部10bと、を備える。 - 特許庁
  • In this IH cooking pot 1, the thermal stress is dispersed to individual small sector plates 6 and the thermal distortion of the sector plates 6, i.e., the heating unit 5, becomes small, thereby making full use of the material of the sector plates 6.
    このIH調理用鍋1では、熱応力が個々の小さな分割プレート6に分散し、分割プレート6つまり発熱体5の熱歪みが小さくなるとともに、分割プレート6の材料が無駄にならない。 - 特許庁
  • To provide an electrophotographic apparatus mounted with a photoreceptor and an intermediate transfer medium capable of realizing superior service life characteristics and superior picture quality, when a developer image is transferred, while applying shearing stress.
    現像剤像に剪断応力を加えながら転写を行った場合に優れた寿命特性及び優れた画質を実現可能な感光体と中間転写媒体を搭載した電子写真装置を提供すること。 - 特許庁
  • To considerably reduce a vibrational stress due to resonance in all vibration mode in an operation region of an axial compressor, and prevent performance reduction of an entire stationary blade cascade.
    軸流圧縮機の運転範囲において、すべての振動モードにおける共振による振動応力を大幅に低減でき、かつ静翼列全体の性能低下を回避できる軸流圧縮機の静翼列を提供する。 - 特許庁
  • To lighten factors which bring about adverse effect on the health, such as abnormal drying of indoor air, inequality of room temperature distribution, air contamination caused by exhaust gas, smoke of cigarette, or building material, an offensive smell, increase of plus ions caused by electric products, mental stress, etc.
    室内空気異常乾燥や室温分布不均等、排ガスや煙草の煙や建材による空気汚染、臭気、電気製品によるプラスイオン増加、心のストレス等の健康に悪影響を齎らす因子を軽減する。 - 特許庁
  • The rolling part is made of steel of which the lower limit ΔKth of the stress intensity factor ranges corresponding to the progress of tensile fatigue crack in an induction-hardened section is 6.2 MPa√m or higher.
    鋼からなる転動部品であって、この鋼の高周波焼入硬化部における、引張型疲労き裂進展に対する応力拡大係数範囲の下限界値ΔKthが6.2MPa√m以上の範囲内にある。 - 特許庁
  • To completely abolish transferring a lot of sludge like swarf produced during plastic lens shaping into a waste recovery container, to reduce work stress, and to improve working environment.
    プラスチックレンズを玉型加工する際に多量に発生する切削粉等スラッジの廃棄物回収容器への移し替え作業の全廃且つ、作業ストレスの軽減化及び作業環境の改善を提供する切削粉回収装置。 - 特許庁
  • To provide a motor which is efficient and produces low vibration and low noise by suppressing an increase in iron loss arising from stress concentration on a stator core due to shrink fitting or press fitting and the nonuniformity of a gap due to deformation.
    焼きばめ圧入による固定子鉄心への応力集中による鉄損増加と変形による空隙の不均一化を抑制して高効率で低振動、低騒音な電動機を提供することを目的とする。 - 特許庁
  • To provide a steel sheet excellent in fatigue crack resisting performance, having enhanced resistance to propagation of cracks inherent in a weld zone of a welded structure or the like, the propagation occurring caused by repeated stress applied to the cracks, and to provide a production method thereof.
    溶接構造物等の溶接部等に内在するき裂が繰り返し応力を受けて進展することに対する抵抗性を高めた耐疲労破壊性能に優れた鋼板とその製造方法の提供。 - 特許庁
  • When the axial length L3 of the guide part 12e is within 5-30% of the length L1 of the roller 11, stress is balanced between the respective parts, and the service life of the retainer 12 can be extended to the utmost.
    よって、案内部12eの軸線方向長さL3が、ころ11の長さL1の5〜30%であると、各部の応力バランスをとりながら、保持器12の寿命を最大限延長することができる。 - 特許庁
  • With this structure, the rubber main body part 32 of the elastic body 24 fixed to the reducing diameter part 26 and an inner cylinder 20 is previously compressed along the radial direction to eliminate the tensile stress left in the rubber main body part 32.
    これにより、縮径部26と内筒20とにそれぞれ固着された弾性体24のゴム本体部32を径方向に沿って予圧縮し、ゴム本体部32に残留していた引張り応力を消失できる。 - 特許庁
  • To lower an instantaneous high stress at the beginning of insertion to engage a connector by connecting each male terminal to each female terminal by pressure contact.
    コネクタを嵌合させて各オス端子が各メス端子に圧接接続される挿入し始め時における瞬間的な高い応力を低く抑える分岐接続箱のオス端子とコネクタのメス端子との接続構造を提供する。 - 特許庁
  • (4) A creep damage rate is calcite from a load stress, calculated from the size (a diameter and a thickness) and the pressure of the water-wall tube, a superheat temperature, an overheat time, and the strength of the material, and a remaining life is diagnosed.
    (4)水壁管の寸法(径及び肉厚)及び内圧より算出した負荷応力と過熱温度、過熱時間及び当該材料の強度よりクリープ損傷率を算出し、残余寿命を診断する。 - 特許庁
  • Large stress concentration does not occur in the exposed part 4a of the coated optical fiber even when the adhesive is deformed by heat because the exposed part 4a is bonded by the soft adhesive 13 so that the intensity of restraint of the adhesive 13 is low.
    光ファイバ芯線露出部分4aは柔らかな接着剤13によって接着されているので拘束度が低く、接着剤が熱変形しても、当該部分に大きな応力集中が起きない。 - 特許庁
  • To provide a negative electrode in which stress can be alleviated while adhesiveness between a negative electrode current collector and a negative electrode active material layer is secured and characteristics can be improved, provide a battery using it, and a manufacturing methods of those.
    負極集電体と負極活物質層との密着性を確保しつつ応力を緩和し、特性を向上させることができる負極およびそれを用いた電池、並びにそれらの製造方法を提供する。 - 特許庁
  • To provide a reinforcing structure for effectively, easily and inexpensively reinforcing and preventing a crack and a structural crack by external force and internal stress applied to a member, and joining and reinforcing the mutual members.
    部材に加わる外力及び内部応力によるひび割れや構造クラックの補強や防止、部材同士の接合及び補強が有効的かつ簡易的に可能で、さらに低コストにて行える補強構造を提供する。 - 特許庁
  • The toughness and the strength of the structural body are enhanced since local large deformation and high stress generated at the rib 13 in the vicinity of the knot area 20 are reduced when an out-of-plane shearing load is applied to the structural body.
    構造体に面外せん断荷重が作用した場合、結節領域20近傍のリブ13に発生する局部的な大変形や高応力が低減されるため、構造体の剛性と強度が向上する。 - 特許庁
  • Since the hard cover member 2 is fixed to the hard base metal 1 by engagement of the engagement pawl and portion to be engaged, such deformation is prevented that the cover comes off the base material or turns due to stress when used.
    硬質のカバー部材2が硬質の基材1に係合爪と係合部との係合によって固定されているので、使用時の応力によって基材から外れたり、回動したりする変形が防止される。 - 特許庁
  • Thus, in printing, even when a stress is generated along the rotating directions of the first and second plate cylinders 1, 2, the sheet M is not moved, but a printing sheet P can be printed as desired.
    これにより、印刷の際に、孔版原紙Mに対して第一及び第二版胴1,2の回転方向に沿う応力が生じても、孔版原紙Mが移動することがなく、印刷用紙Pに対して所望の印刷が行える。 - 特許庁
  • To provide mounting structure capable of reinforcing a mounted component on a board to be protected surely from an external force, and capable of restraining a board distortion to reduce a stress applied to the mounted component on the board.
    基板上の実装部品を補強して外力から確実に保護するとともに、基板歪を抑制して基板上の実装部品が受ける応力を低減することができる実装構造を提供する。 - 特許庁
  • To provide a connector for circuit board of high reliability embodied in a simple structure to assure easy operation of press working, wherein generation of poor performance of connection can be prevented originating from solder cracking, etc., even if an external stress is applied.
    プレス加工が容易となる簡単な構造で、外部からの応力を受けても半田クラックの発生などの接続不良が生じるのを防止できる信頼性の高い、基板接続用コネクタを提供する。 - 特許庁
  • Therefore, the contacting area with the minor end face 3b of the inner ring 3 can be secured and the rigidity of the inner ring 3 be established, and it is possible to suppress the stress generated at the inside corner and to enhance the durability of the hub ring 2.
    これにより、内輪3の小端面3bとの接触面積を確保し内輪3の剛性を図ると共に、隅部に発生する応力を抑制し、ハブ輪2の耐久性を向上させることができる。 - 特許庁
  • On the basis of a shearing force due to a long-term load determined by a reinforced concrete member, a structural element of the reinforced concrete member, and an allowable residual crack width under a long-term stress, an allowable short-term shearing force is determined.
    鉄筋コンクリート部材で定められる長期荷重によるせん断力と、前記鉄筋コンクリート部材の構造要素と、長期応力下での許容残留ひび割れ幅とから、許容される短期せん断力を求める。 - 特許庁
  • To quickly and highly accurately determine iron loss when determining an optimum shape of a soft magnetic material to be used for an electric apparatus based on the iron loss of the soft magnetic material considering influence of stress.
    電気機器に用いられる軟磁性材料の最適な形状を、応力による影響を考慮した当該軟磁性材料の鉄損に基づいて決定するに際し、当該鉄損を高速に且つ精度良く求める。 - 特許庁
  • To reduce a stress of a user when adjusting the positions of therapeutic elements by notifying adjustment allowances of the positions of the therapeutic elements to the user according to the positions of the therapeutic elements and techniques executed by the therapeutic elements.
    施療子の位置と施療子が実行している手技とに応じて、施療子の位置をどの程度調節できるかを使用者に知らせ、施療子の位置調節を行うに際しての使用者へのストレス低下させる。 - 特許庁
  • In the viscoelastic material model, the relation between stress and distortion is defined, and the number of average segments N per molecular chain differs between loaded deformation and unloaded deformation for expressing energy loss.
    前記粘弾性材料モデルは、応力とひずみとの関係が定義され、1本の分子鎖当たりの平均セグメント数Nは、負荷変形時と除荷変形時とで異なることによりエネルギーロスが表現可能である。 - 特許庁
  • To provide a layered ceramic capacitor which can have superior breakdown voltage by improving the structure of an internal electrode lead-out part which is structurally weak, when subjected to a mechanical stress, and a method for manufacturing the capacitor.
    積層セラミックコンデンサの構造上、機械的なストレスに弱いと椎測される内部電極取り出し部の構造を改良し、耐電圧性に優れる積層セラミックコンデンサとその製造方法を提供すること。 - 特許庁
  • A preform 18 has ≥1,150 ppm OH content, ≤5 nm/cm stress birefringence, ≥1×10^18 molecule/cm^3 H_2 content, ≤20 ppm Cl content and max. 500 ppb content of trace impurities of Cr, Co, Fe, Ni, Cu, V, Zn, Al, Li, K and Na and contains no layered structure.
    OH含有量≧1150ppm、応力複屈折≦5nm/cm、H_2含有量≧1×10^18分子/cm^3、Cl含有量≦20ppm、微量不純物元素Cr、Co、Fe、Ni、Cu、V、Zu、Al、Li、K、Na含有量最大500ppbであり、且つ、実質的に層状構造を含まないプリフォーム18とする。 - 特許庁
  • To lower surface energy while relieving stress by partially controlling film strength in the film thickness direction in a step for forming the protective film of a magnetic recording medium and to provide a protective film excellent in wear resistance.
    本発明は、磁気記録媒体の保護膜を形成する工程において、膜方向の部分的に膜強度を制御して応力を緩和しながら表面エネルギーを下げ、耐摩耗性に優れた保護膜を提供する。 - 特許庁
  • To provide a semiconductor device capable of preventing a stress from locally concentrating to an external connecting terminal on a post, and thereby capable of preventing a damage of the external connecting terminal from occurring.
    ポスト上の外部接続端子に対して局所的に応力が集中するのを防止することができ、これにより外部接続端子の損傷の発生を防止することができる半導体装置を提供する。 - 特許庁
  • To provide a method of manufacturing interior parts for a vehicle which can reduce residual stress between a resin base material and a skin material to prevent deformation and does not cause fracture and seeing-through of the skin material.
    本発明は、樹脂基材と表皮材の間の残留応力を減らして変形を防ぎ、また、表皮材の破断や透けの生じない車両用内装部品の製造方法を提供することを目的とする。 - 特許庁
<前へ 1 2 .... 318 319 320 321 322 323 324 325 326 .... 449 450 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.