「STRESS」を含む例文一覧(22485)

<前へ 1 2 .... 89 90 91 92 93 94 95 96 97 .... 449 450 次へ>
  • Also, transverse deflection of the jumper wire caused by wind pressure is reduced so that stress generated in the jumper wire may be reduced.
    また、風圧によるジャンパ線の横振れが低減され、ジャンパ線に発生する応力を低減できる。 - 特許庁
  • To provide a nonvolatile semiconductor storage apparatus in which voltage stress at the time of write-in/erasure can be reduced.
    書込み/消去時の電圧ストレスを低減できる不揮発性半導体記憶装置を提供すること。 - 特許庁
  • To realize image forming corresponding to the stress state of developer and to restrain occurrence of the defect of image quality.
    現像剤のストレス状態に応じた画像形成を可能とし、画質ディフェクトの発生を抑制する。 - 特許庁
  • To obtain the accurate viscoelastic characteristic value of a test piece itself in consideration of the viscoelastic characteristics of a stress rod.
    応力棒の粘弾性特性を考慮して、試験片そのものの正確な粘弾性特性値を得る。 - 特許庁
  • The average of the internal stress of each layer formed on the substrate 1 is equal to or less than 2× 10^8 Pa.
    基板1上に形成された各層の内部応力の平均は、2×10^8Pa以下である。 - 特許庁
  • To provide an electromagnetic steel sheet superior in fatigue characteristics with low core loss under high frequency condition after stress relief annealing.
    歪取り焼鈍後の高周波鉄損が低く、疲労特性に優れた電磁鋼板を提供する。 - 特許庁
  • To obtain a semiconductor module which relieves a thermal stress applying on a solder layer and enhances a reliability.
    はんだ層に作用する熱応力を緩和し、信頼性の向上した半導体モジュールを得ること。 - 特許庁
  • To provide a highly reliable photoelectric conversion device having flexibility and resistance to external stress.
    フレキシブル性を有し、外部ストレスに対して耐性がある信頼性の高い光電変換装置を提供する。 - 特許庁
  • To effectively release stress concentration in a tooth bottom part 50 to enhance reliability and durability.
    歯底部50における応力集中を有効に緩和して、信頼性・耐久性の向上を図る。 - 特許庁
  • To provide a cross-linkable nitrile rubber composition giving rubber cross-linked products which have extremely large tensile stress.
    引張応力が極めて大きなゴム架橋物を与える架橋性ニトリルゴム組成物を提供すること。 - 特許庁
  • (3) The rib 3 is not disposed in an area B on which the shearing stress τ (shearing load Fy) does not exert.
    (3)せん断応力τ(せん断荷重Fy)が作用しない領域Bにはリブ3を配置しない。 - 特許庁
  • To provide a pad electrode structure which can reduce film stress, while maintaining the functions of a barrier metal layer.
    バリアメタル層の機能を維持しながら、被膜応力を低減し得るパッド電極構造を提供すること。 - 特許庁
  • The adiposity inhibitor contains the collagen peptide as an active ingredient, and is used in combination with the exercise stress.
    肥満防止剤として、コラーゲンペプチドを有効成分とし、また運動負荷と組み合わせて使用する。 - 特許庁
  • To provide a semiconductor acceleration sensor having stress absorbing efficiency enhanced and excelling in temperature characteristics.
    応力の吸収効率を向上させて温度特性の優れた半導体加速度センサを提供すること。 - 特許庁
  • WELDABLE ALUMINUM ALLOY FOR FORGING HAVING EXCELLENT STRESS CORROSION CRACKING RESISTANCE, AND FORGED PART USING THE SAME
    耐応力腐食割れ性に優れた溶接可能な鍛造用アルミニウム合金およびそれを用いた鍛造品 - 特許庁
  • To provide a semiconductor deice that ensues a stable operation against heat or stress transmitted to a package.
    パッケージへ伝達された熱や応力に対して安定した動作が可能な半導体装置を提供する。 - 特許庁
  • To perform welding in such a manner that welding quality is not affected, and to reduce welding residual stress.
    溶接品質に影響を及ぼさないように溶接するとともに溶接残留応力を低減する。 - 特許庁
  • As the result, the internal stress of the ta-C film can be relaxed, and the toughness of the ta-C film can be improved.
    その結果、ta−C膜の内部応力が緩和され、ta−C膜の靱性が向上する。 - 特許庁
  • To provide a sputtering target having excellent oxidation resistance, corrosion resistance, electromigration resistance and stress migration resistance.
    耐酸化性、耐腐食性、耐エレクトロマイグレーション性、耐ストレスマイグレーション性に優れたスパッタリングターゲットを提供する。 - 特許庁
  • The flexible substrate 50 is joined with a stress relaxation block 560 on the connection part with the terminal 81.
    フレキシブル基板50には、端子部81との接続部上に、応力緩和ブロック560が接合されている。 - 特許庁
  • Then, this inner stress shuts off the core and no light passes through an optical waveguide within the fuse.
    そして、この内部応力によりコアが遮断されてヒューズ内の光導波路に光が通らなくなる。 - 特許庁
  • Thus, the reliability is markedly improved for the electric field stress while extending the life of the chip.
    このため、動作時の電界ストレス信頼性が著しく向上し、寿命延長を図ることができる。 - 特許庁
  • In the heating process (S5), atoms of a first layer 81 are rearranged, distortion is removed, and the stress is alleviated.
    加熱工程(S5)では、第1層81の原子の再配列、歪の除去、応力の緩和が行なわれる。 - 特許庁
  • To provide a reed valve for an engine reducing stress generated on a reed when the reed is seated.
    リード着座時にリードに与えられる応力を低減することができるエンジン用リードバルブを提供する。 - 特許庁
  • Thereby, a stress generated on the flexible substrate can be suppressed and the panel lifting can be prevented.
    これにより、フレキシブル基板に発生する応力を抑えることができ、パネル浮きを防ぐことができる。 - 特許庁
  • Moreover, this stress cone 130 for a termination joint is made integrally or in parts.
    また、この終端接続部用ストレスコーン130は一体的にまたは複数に分割して成形されている。 - 特許庁
  • To make it possible to print with high precision and reproducibility without imparting stress on a printed board or others with warps.
    反りを持ったプリント基板等へストレスを与えずに、精度よく再現性高く印刷できるようにする。 - 特許庁
  • To provide a wire harness having very small stress to an electric wire while bending is easy.
    容易に屈曲可能でありながら電線へのストレスが極めて小さいワイヤーハーネスを提供すること。 - 特許庁
  • To provide a tuning fork piezoelectric vibrator resistant to stress and external force, and also to provide a tuning fork piezoelectric vibration device.
    応力や外力に強い音叉型圧電振動片、および音叉型圧電振動デバイスを提供する。 - 特許庁
  • To collect a new gene capable of giving salt stress resistance to plants and determine its structure.
    植物に塩ストレス耐性を付与することが可能な、新規な遺伝子を採取して、その構造を決定する。 - 特許庁
  • To provide a semiconductor laser module which is reduced enough in stress and improved in manufacturing yield.
    応力を十分に低減でき、歩留まりの向上した半導体レーザモジュールを提供することにある。 - 特許庁
  • To prevent stress corrosion cracking at a portion near weld zone of stainless steel piping by means of a compact device.
    コンパクトな装置を用いて、ステンレス鋼配管の溶接部近傍における応力腐食割れを防止する。 - 特許庁
  • To eliminate problems arising from tensile stress generated in a membrane mounted on a supporting plate.
    支持プレートに装着されるメンブレンに発生する引張応力により生じる問題点を解消する。 - 特許庁
  • To provide a DC brushless motor of small size and high productivity, in which a stress is hard to occur at an electronic component.
    小形で、生産性が高く、電子部品に応力が発生し難いDCブラシレスモータを得ること。 - 特許庁
  • To reduce stress generated near a root of a ridge in a semiconductor laser device having ridge structure.
    リッジ構造を有する半導体レーザ素子において、リッジ部の付け根付近に生じる応力を低減する。 - 特許庁
  • MANUFACTURE OF Fe-BASE ALLOY MEMBER EXCELLENT IN STRESS CORROSION CRACKING RESISTANCE, AND Fe-BASE ALLOY MEMBER
    耐応力腐食割れ性に優れたFe基合金部材の製造方法、及びFe基合金部材 - 特許庁
  • The stress relieving part 68 is bent and formed so as to be protruded in the plate thickness direction of the fixing part 60.
    応力緩和部68は、固定部60の板厚方向へ突き出るように曲げ形成されている。 - 特許庁
  • On a main wiring member 12, a cap film 13 is formed as a countermeasure against Al stress migration.
    主配線部材12上に、Alのストレスマイグレーション対策としてキャップ膜13が形成されている。 - 特許庁
  • The plant which is resistant to environmental stress can be produced by transducing the gene.
    当該遺伝子を導入することにより、環境ストレスに強い植物を作出するすることが可能である。 - 特許庁
  • METHOD FOR SPECIFYING CUT POSITION AND CUTTING FREQUENCY OF DNA IN CELL CAUSED BY OUTSIDE STRESS BY ONE BASE UNIT
    外部ストレスによる細胞内DNAの一塩基単位での切断位置と切断頻度の特定法 - 特許庁
  • To provide a method of forming a silicon-based insulating film with low dielectric constant and low membrane stress.
    低膜応力及び低誘電率を有するシリコン系絶縁膜を形成するための方法を与える。 - 特許庁
  • Then, correlation between the number of repetitions of stress loading and the spontaneous magnetization is derived on the material.
    次いで、前記材料の、前記応力負荷の繰り返し数と前記自発磁化との相関を導出する。 - 特許庁
  • This reduces the expansion of solder joining and as this result the stress is weakened in the mutually joining with the C4 technique.
    これは、はんだ接合の膨張を低減し、その結果、C4相互接続において応力を弱める。 - 特許庁
  • Then, the thermal stress prevents break of one end of the metal wire 30 due to metal fatigue.
    そして、その熱応力により、金属ワイヤ30の一端が金属疲労により破断するのを防ぐ。 - 特許庁
  • To maintain low water permeability in a structure, by restraining a tensile stress generated in the concrete structure.
    コンクリート構造物に発生する引張応力を抑制することで、構造物の低透水性を維持する。 - 特許庁
  • To reduce a bending stress working on a bracket while chain-driven running, in a chain tensioner or a chain guide.
    チェーンテンショナまたはチェーンガイドにおいて、チェーン走行時にブラケットに作用する曲げ応力を低減する。 - 特許庁
  • To obtain a high stress stabilizer for vehicles excellent in durability by prolonging the fatigue life of a bent part.
    曲げ部の疲労寿命を長くして耐久性に優れた車両用高応力スタビライザーを得る。 - 特許庁
  • METHOD OF MANUFACTURING CHIP AND FET (TRANSISTOR HAVING DIELECTRIC STRESSOR ELEMENT FOR APPLYING IN-PLANE SHEAR STRESS)
    チップ、FET製造方法(面内剪断応力を加えるための誘電体ストレッサ要素を有するトランジスタ) - 特許庁
  • To prevent a semiconductor chip electrode from breakdown due to stress produced by heat cycles.
    熱サイクルに起因して発生する応力によって半導体チップの電極が破壊されるのを防止する。 - 特許庁
  • EXTERNAL PREPARATION FOR SKIN HAVING BOTH ULTRAVIOLET ABSORBENCY AND REDUCING ABILITY FOR OXIDATION STRESS WITH ULTRAVIOLET LIGHT
    紫外線吸収能および紫外線による酸化ストレスの軽減能を併せ持つ皮膚外用組成物 - 特許庁
<前へ 1 2 .... 89 90 91 92 93 94 95 96 97 .... 449 450 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.