「To run the program」を含む例文一覧(163)

1 2 3 4 次へ>
  • How much time will he need to run the program?
    彼の作業の所要時間は? - 映画・海外ドラマ英語字幕翻訳辞書
  • Press F6 to run the program again.
    F6 キーを押して、プログラムを再実行します。 - NetBeans
  • To prevent the start of an illegal auto-run program.
    不正なオートランプログラムの起動を予防する。 - 特許庁
  • To run the program:
    プログラムを実行するには、次の手順に従います。 - NetBeans
  • "program argv[0] ..." gives the program to run andits arguments, in the same form as the EXEC keyword.
    "program argv[0] ." は実行するプログラムとその引き数であり、EXEC キーワードと同じ形式である。 - XFree86
  • To run the program in the IDE:
    IDE でプログラムを実行するには、次の手順に従います。 - NetBeans
  • The final step is to build and run the program.
    最後のステップでは、プログラムを構築して実行します。 - NetBeans
  • Because it ends up the government is going to run the program.
    なぜなら最終的に政府が運営することになる - 映画・海外ドラマ英語字幕翻訳辞書
  • the device is needed to run the user's program
    ユーザプログラムを実行するのにその装置が必要である - コンピューター用語辞典
  • INTERNAL-AUTH-PROGRAM authscheme program argv[0] argv[1]... Specifies the program to run to set up authentication for the specifiedauthentication scheme.
    INTERNAL-AUTH-PROGRAM authscheme program argv[0] argv[1] .指定された認証方法に対して認証を行うために実行するプログラムを指定する。 - XFree86
  • As the program continues to run, the Profiler will update the display.
    プログラムの実行を続けると、Profiler の表示は更新されます。 - NetBeans
  • To run the program outside of the IDE:
    IDE の外部でプログラムを実行するには、次の手順に従います。 - NetBeans
  • find and load the shared libraries needed by a program, prepare the program to run, and then run it.
    はプログラムに必要な共有ライブラリを見つけてロードし、プログラムの実行を準備してから起動させる。 - JM
  • A contextspecifies a general environment the program is to be run in.
    この環境の詳細は、ホストに固有のものである。 - XFree86
  • shell the program to run at login (if empty, use /bin/sh ).
    shellログイン時に動くプログラム名 (空欄の場合/bin/shが使われる)。 - JM
  • By definition, the system initializes the data with zeros when the program begins to run.
    定義上、システムはプログラムの実行開始時に、データを 0 で初期化する。 - JM
  • 3 Determine which program to run (On the diskless system)
    3. どのプログラムを実行するかを調べる(ディスク無しのシステム上で) - FreeBSD
  • This indicates the program to run as the session after the user has logged in.
    ユーザがログインした後にセッションとして動作させたいプログラムを指定する。 - XFree86
  • Finally, COMMAND is the command line that was used to run the program.
    最後に、COMMANDはそのプログラムを起動するのに使われたコマンドラインとなります。 - FreeBSD
  • Click the X in the Query Editor's tab to close the Query Editor, and run the program again.
    クエリーエディタのタブの「」をクリックしてクエリーエディタを終了し、プログラムを再実行します。 - NetBeans
  • on one of these programs, the program will attempt to run with argc = 0 and the results will be unpredictable.
    を用いると、プログラムは argc = 0 で実行される。 結果は予想不可能である。 - JM
  • The home server 126 receives the instruction of the user and sets a monitoring program to be run by the home server 126.
    ホームサーバ126は、ユーザの指示を受け、ホームサーバ126が実行するモニタリングプログラムを設定する。 - 特許庁
  • Once in that directory, run make search name= program-name where program-name is the name of the program you want to find.
    そのディレクトリに移動したら、make search key=プログラム名と入力してください。 プログラム名の部分には検索したいプログラム名を入れます。 - FreeBSD
  • Nothing new needs to be compiled, but the program is run.
    新しくコンパイルする必要があるものは何もなく、単にプログラムが実行されます。 - NetBeans
  • If set to a non-empty string, causes the program to list its dynamic library dependencies, as if run by ldd (1),
    を実行したときのように動的ライブラリの依存関係をリスト表示させる。 - JM
  • The process created to run the program runs as user and group root .
    プログラムを実行するために生成されるプロセスは、ユーザ、グループともroot として実行される。 - JM
  • The test data is fed and run in order to check if the program can be handled correctly
    プログラムが,正しく作動するかどうかを検査するために,テストデータを与えて実行させる - コンピューター用語辞典
  • the ability to run the program of a less capable machine is usually called upward compatibility
    より能力の低いマシンのプログラムを実行できる機能のことを上位互換性と呼ぶ - コンピューター用語辞典
  • Concerning switching of the incorporated program and the card memory program, the card memory program can be run without running the incorporated program by switching the destination of access from the memory 2 to the memory card 4 or card memory program can be run by branching the incorporated program to the card memory program at required timing.
    内蔵プログラムとカード格納プログラムの切り換えは、アクセス先をメモリ2からメモリカード4へ切り換えることにより、内蔵プログラムは実行せず、カード格納プログラムを実行するようにしたり、内蔵プログラムから、必要なタイミングでカード格納プログラムに分岐してカード格納プログラムを実行するようにしたりする。 - 特許庁
  • When a program starts to run the system arranges to execute the code in this section before calling the main program entry point.
    プログラムが実行を開始すると、システムはメインプログラムエントリポイントを呼び出す前に、このセクションにあるコードを配置して実行する。 - JM
  • When a program to be run on the microprocessor is compiled, the conditioned branch instruction is inserted into the program by a compiler.
    条件付分岐命令は、マイクロプロセッサで動作させるプログラムのコンパイル時に、コンパイラによりプログラム内に挿入される。 - 特許庁
  • The data can be erased on the hard disk 8 by operating an electronic key 23 to run the erasing program.
    電子キー23を操作し、消去プログラムを実行することで、ハードディスク8のデータを消去する。 - 特許庁
  • To provide a programmable controller system capable of returning a program after writing processing in the under run condition to a correct pre-change program.
    RUN中書込み後のプログラムを正しい変更前のプログラムに戻すことができるプログラマブルコントローラシステムを得ること。 - 特許庁
  • This is useful if you'd like to run a tty-enhancer which is expecting to execute the program specified in $SHELL.
    これは、$SHELL を起動プログラムの指定に用いるようなtty 強化プログラムを使いたい時に便利である。 - JM
  • To improve the efficiency in the simulation of a target program to be run in a computer system composed of plural processors.
    複数プロセッサ構成のコンピュータシステムで走行すべきターゲットプログラムのシミュレーションの効率化を図る。 - 特許庁
  • newsyslog.conf is the configuration file for newsyslog(8) , a program that is normally scheduled to run by cron(8) .
    newsyslog.conf は、通常 cron(8) によって予定を決めて実行されるプログラムnewsyslog(8)のための設定ファイルです。 - FreeBSD
  • To run an application program in a kernel mode in order to improve performance without modifying the program, and to increase the speed of determining the operational mode.
    性能を向上させるためにアプリケーションプログラムをカーネルモードで動作させる場合のプログラム修正を不要とするとともに、動作モード判定の高速化をはかる。 - 特許庁
  • Note that to access settings for the main class, program arguments, the working directory for program execution and VM options, you have to select the Run node.
    主クラスの設定、プログラムの引数、プログラム実行の作業ディレクトリ、および VM オプションを表示するには、「実行」ノードを選択する必要があります。 - NetBeans
  • At the same time, the navigation program is run on the cellular phone 10 to provide navigation along the route displayed.
    また同時に、携帯電話10でナビプログラムを実行して、当該表示されたルートに沿ったナビゲーションを行う。 - 特許庁
  • PRODUCT DATA MANAGEMENT SYSTEM, PROGRAM TO RUN THE SYSTEM, RECORDING MEDIUM RECORDED WITH THE PROGRAM, AND PRODUCT DATA MANAGEMENT METHOD
    製品データ管理システム、そのシステムを動作させるためのプログラム、そのプログラムが記録された記録媒体および製品データ管理方法 - 特許庁
  • The main thing that you create when writing a program to run in the ActiveX environment is a component, a self-sufficient program.
    アクティブ・エックス環境で実行するプログラムを書き込む際に作成する主なものは,コンポーネント,つまり自己完結プログラムである. - コンピューター用語辞典
  • The encryption conversion unit 100 encrypts a control program run by the PLC 130 and transmits the encrypted program to the PLC 130.
    暗号変換機100は、PLC130が実行する制御プログラムを暗号化して、暗号化されたプログラムをPLC130に送信する。 - 特許庁
  • Preferably, while the writing in RUN time is prohibited in the attention level-designated program element, the writing in RUN time is permitted in a trace mode, and STOP is performed every execution of the program element P2 to display a predetermined message for indicating that the writing in RUN time is performed to the caution level-designated program element to a user.
    好ましくは注意レベル指定プログラム要素にはRUN中書込みを禁止する一方で、トレースモードではRUN中書込みを許可すると共にプログラム要素P2の実行時に毎回STOPして所定のメッセージを表示してユーザに注意レベル指定プログラム要素に対するRUN中書込みが行われたことを表示する。 - 特許庁
  • DEVICE AND METHOD FOR PATTERN RECOGNITION, AND PROGRAM RUN ON COMPUTER TO REALIZE THE METHOD
    パターン認識装置及び方法並びに当該方法を実現するコンピュータに実行させるプログラム - 特許庁
  • Press F7 (or choose Run Step Into) to step through the program and watch the acrostic being constructed.When the program reaches the end, the debugger windows close.
    ツールバーで「ステップイン」(F7) を選択してプログラムをステップ実行し、形成されるアクロスティックを観察します。 プログラムの最後に到達すると、デバッガウィンドウが閉じます。 - NetBeans
  • Click the X in the Query Editor's tab, labeled something like jdbc:derby://localhost:1527/travel to close the Query Editor, and run the program again.
    クエリーエディタを閉じるには、jdbc:derby://localhost:1527/travel のようにラベル付けされたクエリーエディタのタブの X をクリックして、再度プログラムを実行します。 - NetBeans
  • Choose Run RunMainProject (F6).In the Output window, you should see the output from the program, Result =Hello (the acrostic of the phrase that was passed to the program as an argument).
    「実行」「主プロジェクトを実行」(F6) を選択します。 「出力」ウィンドウに、プログラムからの出力 Result = Hello (引数としてプログラムに渡されたフレーズのアクロスティック) が表示されるはずです。 - NetBeans
  • When a circuit for outputting a program run signal to a section for inputting a reset pulse for the CPU 1 is unusual, even if an instruction for stopping the program run signal B for a predetermined time is output, the CPU 1 is not reset, and thus the diagnostic program sets the reset generation frequency counter to 0.
    プログラムラン信号出力回路からCPU1のリセットパルス入力部が異常である場合、一定時間プログラムラン信号Bを停止する指示を出力しても、CPU1のリセットが発生しないので、診断プログラムはリセット発生回数カウンタを0とする。 - 特許庁
  • He pulled me off a division desk to help him run the drone program back when we only had eight predators over baghdad.
    私を担当部門から引き抜いて 無人偵察機のプロジェクトへ バグダッドに8機しか無かった頃だ - 映画・海外ドラマ英語字幕翻訳辞書
  • This device is provided with a CPU 10101 for running a prescribed program, a memory 10103 for storing the program to be run by the CPU 10101 and data to be used for that program and a memory protection controller 10102 for determining whether the memory 10103 is illegally accessed by the program to be run by the CPU 10101 or not.
    所定のプログラムを実行するCPU10101と、CPU10101で実行するプログラムおよびそのプログラムで使用するデータを格納するメモリ10103と、CPU10101で実行するプログラムがメモリ10103に対して不正アクセスしたか否かを判断するメモリ保護制御装置10102とを備えている。 - 特許庁
1 2 3 4 次へ>

例文データの著作権について