「after-processing」を含む例文一覧(10663)

<前へ 1 2 .... 14 15 16 17 18 19 20 21 22 .... 213 214 次へ>
  • The etalon spectroscope 32, therefore, outputs a spectrum waveform f (λ) after the convolution processing.
    したがってエタロン分光器32からはコンボリューション処理後のスペクトル波形f(λ)が出力される。 - 特許庁
  • After that, an autocorrelation processor 9 executes autocorrelation processing of the synchronous signal 2 to acquire an autocorrelation value.
    その後、相関処理部9で、同期信号2の自己相関処理を実施して自己相関値を得る。 - 特許庁
  • In this case, the LNFA is an address after an address of an end instruction included in the loop processing.
    ここで、LNFAは、ループ処理に含まれる終端命令のアドレスより後のアドレスである。 - 特許庁
  • Therefore, the CPU 2 can immediately execute the communication processing after raised from a stopping state.
    このため、CPU2は、停止状態からの起床後、直ちに通信処理を実行することができる。 - 特許庁
  • After then, the merchandise ordering data is corrected at need and then given to an order reception processing part 3.
    その後、商品オーダデータを必要に応じて訂正してから受注処理部3に通知する。 - 特許庁
  • Display is performed with the luminance of backlight controlled by local dimming after the super-resolution processing.
    そして、超解像処理の後、ローカルディミングを用いて、バックライトの輝度を制御して、表示を行う。 - 特許庁
  • To promptly and easily remove a separation agent from specimen container after centrifugal separation processing.
    遠心分離処理後の検体容器から分離剤を迅速かつ容易に除去できるようにする。 - 特許庁
  • To uniformize an amplitude difference between a non-chirp signal and a chirp signal after pulse compression processing.
    非チャープ信号とパルス圧縮処理後のチャープ信号との間の振幅差を均一化する。 - 特許庁
  • After a reserve agent completes the processing of a call, a cycle timer is started for that agent.
    リザーブエージェントが呼びの処理を終了した後、サイクルタイマーがそのエージェントに対して開始する。 - 特許庁
  • After shading processing by a shading circuit 34, the processed signal is stored in a line RAM 36.
    その後、シェーディング回路34でシェーディング処理が行なわれた後、ラインRAM36に記憶される。 - 特許庁
  • To provide an image processing circuit which reduces effects of focus deviation after automatic focusing.
    オートフォーカス後のピントずれの影響を低減することができる画像処理回路を提供する。 - 特許庁
  • To provide an electronic device which can be easily taken out of a mold after resin sealing processing.
    樹脂封止工程後に、金型から容易に取り出すことが出来る電子装置を提供する。 - 特許庁
  • To allow lower power consumption to be achieved after fulfillment of desired processing performance.
    所望の処理性能を満足した上で、低消費電力化を図ることができるようにする。 - 特許庁
  • To reduce a processing time of packet data after content data reception, in a content receiver.
    コンテンツ受信機において、コンテンツデータ受信後におけるパケットデータの処理時間を短縮する。 - 特許庁
  • After attaining an interruption permitting state, the NOP processing of performing only the addition of a program counter is executed.
    割込許可状態にしたあと、プログラムカウンタの加算のみを行うNOP処理を実行する。 - 特許庁
  • CREASE GROOVE PROCESSING PROVIDED ON PET BOTTLE AND CANNING CAN DURING THEIR MANUFACTURING PROCESS FOR FACILITATING COLLAPSE OF THEM FOR DISPOSAL AFTER USE
    ペットボトルや缶詰缶の製造課程で、用済み後潰し易くするための折り目溝加工。 - 特許庁
  • To provide a processing method for a photosensitive material with little deterioration in photographic performance before and after running.
    ランニング前後での写真性能の劣化の少ない感光材料の処理方法の提供。 - 特許庁
  • PICA detector 130 captures photons and generates a time trace, after processing.
    更に、PICA検出器130は、フォトン放出を捕らえ、処理して時間トレースを生じさせる。 - 特許庁
  • METHOD OF FLATTENING SILICON FILM SURFACE DURING AND AFTER PROCESSING THROUGH SEQUENTIAL LATERAL CRYSTALLIZATION METHOD
    逐次的横方向結晶化法による処理中及び処理後のシリコンフィルムの表面平坦化法 - 特許庁
  • The memory buffer for calculation 4 transfers the image data of one line after the processing to the thermal head 5.
    計算用メモリバッファ4は、処理後の1ライン分の画像データをサーマルヘッド5へ転送する。 - 特許庁
  • In developing processing of a resist film 62 development made after the exposure to light, the sublimation preventive film 64 is removed.
    露光後行われるレジスト膜62の現像処理にて昇華防止膜64を除去する。 - 特許庁
  • Whether the size value SZ is an odd number value is discriminated after the address value Cs discrimination processing (S11).
    サイズ値SZが奇数値であるか否かは、アドレス値Csの判別処理の後に判別される(S11)。 - 特許庁
  • An empty capacity of a storage place after performing processing with the paper in stock is calculated (S403).
    また、在庫用紙で処理を行なった後の保管場所の空き容量を算出する(S403)。 - 特許庁
  • To reduce the processing time required for the transmission of corresponding data, after receiving a transmission request.
    送信要求を受信してから対応するデータを送信するまでの処理時間を短縮する。 - 特許庁
  • A determination part 270 determines a file to be downloaded after authentication processing performed by the authentication server.
    決定部270は、認証サーバによる認証処理の後に、ダウンロードするファイルを決定する。 - 特許庁
  • Time until the drying processing is performed after the wet barrel polishing is performed is set to be within five minutes.
    また、湿式バレル研磨を行った後、乾燥処理を行うまでの時間を5分以内とする。 - 特許庁
  • To prevent inversion of color component ratio before and after quantization in quantizing processing of a multi-level color image.
    カラー多値画像の量子化処理において、量子化前後の色成分比の逆転を防止する。 - 特許庁
  • In the manufacturing method of the semiconductor device, it is subjected to a wet processing by using the aqueous solution of a phosphoric acid after etching its ferroelectrics film.
    強誘電体膜をエッチングしたあと、燐酸水溶液を用いてウェット処理をする。 - 特許庁
  • To prevent a leakage of a liquid crystal immediately after bonding of substrates by shortening processing time for sealing part formation.
    シール部形成の処理時間を短縮し、基板貼り合わせ直後の液晶の漏れを防ぐ。 - 特許庁
  • The second conversion section 20 carries out voltage comparison processing after the dense reference voltages Vrf are stabilized.
    第2変換部20は、密な基準電圧Vrfの安定後、電圧比較処理を行う。 - 特許庁
  • To apply a test pattern in which physical arrangement of a cell is adopted to a memory after relieving processing.
    救済処理後のメモリ対して、セルの物理的配置を考慮したテストパターン印加を行うこと。 - 特許庁
  • To release lock of a cartridge chamber, without changing the use state display of a spool after VEI processing.
    VEI処理後、スプールの使用状態表示を変化させずに、カートリッジ室のロックを解除する。 - 特許庁
  • A settlement part 283 performs settlement processing based on the charge amount after offset calculated by the offset part 282.
    決済部283は、相殺部282が求めた相殺後請求金額に基づいた決済処理を行う。 - 特許庁
  • To provide thermoplastic resin film coated aluminum panel excellent in adhesion after strong processing or retort treatment.
    強加工後あるいはレトルト処理後の密着性に優れた樹脂被覆アルミニウム板を提供する。 - 特許庁
  • By the processing, the cutting surfaces to the respective formed images after cutting the output form are aligned.
    この処理により、出力用紙の裁断後の各形成画像に対する裁断面を揃える。 - 特許庁
  • After transmitting such a notification regarding the cancellation, the cancellation processing of the member registration is executed.
    このような取消に関する通知を送信した後に、会員登録の取消処理が実行される。 - 特許庁
  • The respective terminals 10 output the output data based on the received data after the processing.
    そして、各端末10は、返信された処理後データに基づいて出力データを出力する。 - 特許庁
  • The CPU 201 executes image formation processing for the number of the printed sheets after selection of an operation mode (S20).
    CPU201は、動作モードの選択後、印刷枚数分の画像形成処理を行う(S20)。 - 特許庁
  • To save labor for processing mail the transmission of which has turned out to be an error after receiving such an erroneously transmitted mail.
    送信エラーメールの受信後に該送信エラーとなったメールの処理の手間を省くこと。 - 特許庁
  • The adaptive filters 70 to 72 apply the adaptive filter processing to the MUSE moving picture after the interpolation.
    適応フィルタ70〜72は、補間後のMUSE動画信号に適応フィルタ処理を施す。 - 特許庁
  • To provide a method of restarting a robot after a premature interruption of a processing program.
    処理プログラムにおける早期中断の後にロボットを再始動する方法を明確にすること。 - 特許庁
  • After the writing, data processing is performed in a structure wherein a single nonvolatile memory is for each CPU.
    書き込み後は、各々のCPUにつき、1個の揮発性メモリの構成で、データ処理を行う。 - 特許庁
  • To easily manage and set an access right after processing shared information which can be shared between users.
    ユーザ間で共有可能な共有情報の加工後のアクセス権を容易に管理、設定する。 - 特許庁
  • In a mobile station, after applying FET processing to a DURE symbol, the DURE symbol is detected.
    移動局において、受信信号をFFT処理後、DUREシンボルの検出を行う。 - 特許庁
  • After the data are moved, a defective sector on a disk cache is subjected to substitution processing by a slipping replacement method.
    データ移動後、ディスクキャッシュ上の欠陥セクタをスリッピング・リプレースメント法により代替処理する。 - 特許庁
  • The image data after correction is subjected to print processing in an outputting section 28 and a printed image 240 is obtained.
    補正後の画像データは出力部28でプリント処理されてプリント画像240が得られる。 - 特許庁
  • After the vibration of the tape 33, the part is inspected again by the camera 13 and the processing part 15.
    キャリアテープ33の振動後にカメラ13及び画像処理部15により再検査を行なう。 - 特許庁
  • An image compressing circuit 30 compresses and encodes the image data after the noise removal processing.
    画像圧縮回路30は、ノイズ除去処理が施された画像データを圧縮符号化する。 - 特許庁
  • The processing is performed relative to all the pixels, to thereby determine the phase difference of the whole object before and after the deformation.
    この処理を全画素について行い、物体全体の変形前後の位相差を求める。 - 特許庁
  • The hardness of the pipe inner surface after the shot processing on the pipe inner surface is 350 Hv or greater.
    さらに、管内面へのショット加工後の管内表面の硬さが350Hv以上であること。 - 特許庁
<前へ 1 2 .... 14 15 16 17 18 19 20 21 22 .... 213 214 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.