「average value」を含む例文一覧(4316)

<前へ 1 2 .... 69 70 71 72 73 74 75 76 77 .... 86 87 次へ>
  • An ultraviolet spectrum showing the relation between ultraviolet absorbance and the wavelength of ultraviolet rays is measured, with respect to an arbitrary sample and the average value of the absorbance values of ozone at wavelengths of 230 and 290 nm is subtracted from the absorbance value of ozone at a wavelength of 260 nm, using the absorbance data of ozone at wavelengths of 230, 260 and 290 nm of the measured ultraviolet spectrum, to calculate the concentration of ozone.
    任意の試料について紫外線吸光度と紫外線の波長との関係を示す紫外線スペクトルを測定し、当該測定された紫外線スペクトルのうち、波長230,260,290nmにおけるオゾンの吸光度の情報を用いて、260nmでの吸光度の値からを230,290nmでの吸光度の値の平均値を差分することによってオゾン濃度を算出する。 - 特許庁
  • The photometric device includes the accumulation type photometric sensor 19, and accumulation control means 23 and 24 performing first control to control accumulation of the photometric sensor 19 based on the maximum value of output obtained by the photometric sensor 19, and second control to control accumulation of the photometric sensor 19 based on an average output value by the photometric sensor 19.
    測光装置は、蓄積型の測光センサ19と、測光センサ19で得られる出力の最大値に基づいて測光センサ19を蓄積制御する第1制御、および測光センサ19による平均的な出力値に基づいて測光センサ19を蓄積制御する第2制御を行う蓄積制御手段23、24とを備える。 - 特許庁
  • An advertisement extraction unit 141 reads, from the article DB 147, a search keyword registered for an article name notified from an advertiser terminal 2 and extracts an advertisement of which the result value is equal to or higher than the result value average registered in the article DB 147 for that search keyword, from among the advertisements registered in the advertisement DB 148 for the article name.
    広告抽出部141は、広告主端末2から通知された商品名について登録されている検索キーワードを商品DB147から読み出し、当該商品名について広告DB148に登録されている広告のうち、実績値が、当該検索キーワードについて商品DB147に登録されている実績値平均以上であるものを抽出する。 - 特許庁
  • Regarding an edge-shift quantity measured at an edge-shifted part in an edge part of the pit and the land, based on its standard deviation value and average and information of a minimum shift quantity decided in advance as the minimum shift quantity which can be discriminated to have been edge-shift in binary discrimination, a jitter value about the edge-shift quantity is calculated.
    上記ピットとランドとのエッジ部分のうちエッジシフトが行われた部分で測定されたエッジシフト量について、その標準偏差値と平均値と、さらに2値判定においてエッジシフトが行われたとして判定可能な最小限のシフト量として予め定められた最小シフト量の情報とに基づき、上記エッジシフト量についてのジッタ値を計算する。 - 特許庁
  • In judging the overrun condition of a diesel engine carried out with an ECU, when a fuel injection amount is judged as zero, it is judged whether a speed error value between a maximum rotation speed NEATDC 90 and an average rotation speed NEAVE of an engine rotation speed is greater than a standard speed error value ΔNE 0 (step 110).
    ECUが実行するディーゼルエンジンのオーバーラン状態の判定処理は、燃料噴射量が0であると判定されると、エンジン回転速度NEの最大回転速度NEATDC90と平均回転速度NEAVEとの回転速度偏差が基準回転速度偏差ΔNE0より大きいか否かが判定される(ステップ110)。 - 特許庁
  • To provide a fluid transferer that transfers a fluid using reciprocation, and can prevent a difference between an average value of a fluid transfer amount and a peak value thereof during a cycle of the reciprocation, and to provide a fluid filling apparatus having the fluid transferer, and a fluid transfer method.
    往復運動を用いて流動体を移送するものであって、往復運動の一周期の間の流動体移送量の平均値と、流動体移送量のピーク値との差を抑制することができる流動体移送装置、その流動体移送装置を備える流動体充填装置、及び、流動体の移送方法を提供する。 - 特許庁
  • The environment providing control part 13 provides the comfortable environment for the desired period in accordance with the desired period input to the desired period input part and controls the environment to be provided for each area so that an average value for the environment provided for a preset period including the desired period gets to a preset target value.
    環境提供制御部13は、要望期間入力部に入力された要望期間に基づいて、要望期間において快適な環境を提供するとともに、要望期間を含む所定期間において提供する環境に関する値の平均値が所定の目標値になるように、それぞれのエリアに対して環境提供制御を行う。 - 特許庁
  • Moreover, a gradient f' of the decided average value E [X] of a performance function f (a function linking the variables X with a performance value Z) as a function of the variables X is acquired to convert the acquired statistical amounts into the function f by using the acquired gradient f'.
    さらに、その確率変数Xの関数としての性能関数f(確率変数Xを性能値Zに関連付ける関数)の、その決定された平均値E[X]における勾配f’を取得し、その取得された勾配f’を用いることにより、確率変数Xについて取得された統計量を性能関数fの統計量に変換する。 - 特許庁
  • To provide a pixel interpolation device, an image reading device, and a pixel interpolation program which can properly perform interpolation of pixels of pseudo gray-scale images compared with the case that a pixel value of an interpolation pixel corresponding to the position between adjacent photoelectric conversion element arrays is calculated by the average pixel value of the pixel corresponding to an end part of the photoelectric conversion element array.
    隣接する光電変換素子アレイの間の位置に対応する補間画素の画素値を光電変換素子アレイの端部に対応する画素の画素値の平均により求めた場合に比較して、擬似階調画像の画素の補間を適切に行うことが可能な画素補間装置、画像読取装置、及び画素補間プログラムを提供する。 - 特許庁
  • Preferably, the quarter-wave plate (λ/4) is provided with a first layer containing the material with the positive intrinsic birefringence value and a second layer containing the material with the negative intrinsic birefringence value and average orientation directions of molecular chains in the first layer and in the second layer are equal to each other in the backlight device for the liquid crystal display.
    好ましくは、前記1/4波長板(λ/4)が、前記固有複屈折値が正である材料を含有する第一の層と、前記固有複屈折値が負である材料を含有する第二の層とを有し、前記第一の層及び前記第二の層における分子鎖の平均配向方向が等しい前記液晶ディスプレイ用バックライト装置である。 - 特許庁
  • A DSP 21 includes a capacity estimator 25, which estimates the capacity of an output capacitor 14 from a variation value ΔVo of output voltage Vo in a prescribed period ΔT and the average value iLave of an inductor current iL during the prescribed period ΔT by monitoring the output voltage Vo and the inductor current iL flowing into a choke coil 13.
    DSP21は、出力電圧Voとチョークコイル13に流れるインダクタ電流iLを監視し、所定期間ΔTにおける出力電圧Voの変動値ΔVoと、所定期間ΔT中のインダクタ電流iLの平均値iLaveとにより、出力コンデンサ14の容量を推定する容量推定器25を備えている。 - 特許庁
  • A 1st layer composed of a mixture of a resin having hydroxyl value of 5 to 300 with a silane coupling agent or a resin having hydroxyl value of 5 to 300 and alkoxysilyl group is formed on the surface of the base material and a 2nd layer composed of a resin containing an inorganic oxide having ≤100 nm average particle diameter is formed on the 1st layer.
    基材の表面に、水酸基価が5以上300以下の樹脂とシランカップリング剤との混合物又は水酸基価が5以上300以下でアルコキシシリル基を有する樹脂からなる第一層を形成し、この第一層の上に、100nm以下の平均粒子径である無機酸化物を含む樹脂からなる第二層を形成する。 - 特許庁
  • The liquid crystal display module 18 generates auxiliary image data based on the auxiliary image control data, and generates pseudo narrow view image data, by which average luminance of adjacent pixels on the liquid crystal display panel 22 in normal vision becomes a value matching the main image data and a luminance difference of the adjacent pixels in the normal vision becomes a value matching the auxiliary image data, from the display data.
    液晶表示モジュール18は、副画像制御データに基づいて、副画像データを生成し、液晶表示パネル22上の隣接ピクセルの正視時における平均輝度が、主画像データに応じた値となり、隣接ピクセルの正視時における輝度差が、副画像データに応じた値となる擬似狭視野画像データを表示データから生成する。 - 特許庁
  • An ECU refers to the flow rate characteristic stored beforehand to set a current value larger than the upper limit of a null area as a null point, starts feedback control according to deviation of an actual stroke to a target stroke (S01, S02), and records an average value A1 of an indication current in a certain period of time after the piston is stabilized in a neutral state (S03).
    ECUは、予め格納されている流量特性を参照してヌル領域の上限値よりも大きい電流値をヌル点に設定して目標ストロークに対する実ストロークの偏差に応じたフィードバック制御を開始し(S01,S02)、ピストンが中立状態に安定後一定時間における指示電流の平均値A1を記録する(S03)。 - 特許庁
  • The TS receiving device (1) using a transmission system of the TS by an RTP has: an extraction means (RTP time stamp extracting part 12) for extracting a time stamp from the received RTP packet; and an averaging means (RTP time stamp averaging part 13) for computing a differential value of the time stamp between RTP packets to obtain an average value.
    RTPによるTSの伝送方式を用いるTS受信装置(1)は、受信したRTPパケットからタイムスタンプを抽出する抽出手段(RTPタイムスタンプ抽出部12)と、RTPパケット間のタイムスタンプの差分値の計算を行って平均値を求める平均化手段(RTPタイムスタンプ平均化部13)とを有する。 - 特許庁
  • The judgement means 26 finds the amplitude of a sound for each frequency by Fourier transforming the sounds collected at the acoustic sensors, and by acquiring the amplitude at a predetermined frequency or by working out the integrated value or average value of the amplitudes within a predetermined frequency range, the presence or absence of the membrane breakage is evaluated.
    判定手段26は、音響センサで集音した音をフーリエ変換して周波数毎の音の振幅を求め、あらかじめ設定した周波数における振幅を求めることにより、あるいは、あらかじめ設定した周波数範囲における振幅の積分値又は平均値を算出することにより、膜破断の有無を判定する。 - 特許庁
  • A texture coordinate and a level-of-detail(LOD) value are operated from object data for every unit of pixel, the filtering area of a texel read out of a texture memory is determined on the basis of these texture coordinate and LOD value, a weighing average corresponding to the size of the determined filtering area is found and a texture color to be stuck to the polygon is generated.
    オブジェクトデータからピクセル単位にテクスチャ座標及び詳細度LOD(Level Of Detail)値を演算し、このテクスチャ座標及び詳細度LOD値に基づき、テクスチャメモリから読み出されるテクセルのフィルタリング領域を決定し、決定されたフィルタリング領域の大きさに応じた重み付け平均を求め、前記ポリゴンに貼りつけるテクスチャカラーを生成する。 - 特許庁
  • A local area including remarkable pixels in an original image is set (504), pixel groups are set in a plurality of forms in this area (506), the pixel group forms most compatible with the structure of the original image in the local area are selected (508, 510), and the average pixel value of the pixel groups including the remarkable pixels is used as the new pixel value of the remarkable pixels.
    元画像において注目画素を含む局所領域を設定し(504)、その領域において画素グループを複数の態様で設定し(506)、局所領域における元画像の構造に最も良く適合する画素グループ態様を選択し(508,510)、注目画素を含む画素グループの平均画素値を注目画素の新たな画素値とする。 - 特許庁
  • In a 3D filter 41 of an interlace interference removal section 40, if the execution of vertical scrolling is detected, an accumulated pixel value is calculated while being made to perform parallel translation following the amount of average movements to two or more past output images according to the motion vector (Mx, My), and the pixel value is adapted to an output image during vertical scrolling (interpolation picture).
    インターレース妨害除去部40の3Dフィルタ41では、縦スクロールしていることが検出されると、動きベクトル(Mx、My)に応じて過去複数枚の出力画像に対して平均移動量に従った平行移動を行わせて累積した画素値を計算し、その画素値を縦スクロール時の出力画像(補間画像)とする。 - 特許庁
  • According to their analysis results: 1. if the ratio of outstanding government obligations is less than 90% of GDP, the relationship between government obligations and the real GDP growth rate are low, however, if the rate of outstanding government obligations is over 90% of GDP, then the rate would be 1% less when compared to cases where the real GDP growth rate central value is less than 90% and it is even lower using the average value.
    彼らの分析結果によれば、①政府債務残高対GDP比が90%未満の場合には、政府債務と実質GDP成長率の関係は弱いが、政府債務残高対GDP比が90%以上の場合には、実質GDP成長率の中央値は90%未満の場合と比較して約1%低くなり、平均値では更に低くなる。 - 経済産業省
  • When the average value and standard deviation of the examination value groups after conversion are calculated for each of the plurality of types of numerical conversions and population distribution is created, the population distribution closest to normal distribution is extracted from the population distribution and a management range for managing the precision of a specimen is set by the extracted population distribution.
    それぞれ変換された複数種類の数値変換ごとに変換後の検査値群の平均値および標準偏差を算出して母集団分布を作成すると、この母集団分布の中から最も正規分布に近い母集団分布を抽出し、抽出した母集団分布を用いて、検体の精度を管理するための管理範囲を設定する。 - 特許庁
  • The aqueous coating composition contains an aqueous medium, a basic compound and an acrylic-modified epoxy resin obtained by bonding an esterifying reaction product (A) of (a2) a carboxylic group-containing acrylic resin having a specific acid value, a specific Tg and a specific weight average molecular weight and (a1) an epoxy resin with a carboxylic group-containing acrylic resin with a higher acid value.
    特定の酸価、特定のTg及び特定の重量平均分子量のカルボキシル基含有アクリル樹脂(a2)とエポキシ樹脂(a1)とのエステル化反応物(A)をさらに高酸価のカルボキシル基含有アクリル樹脂部分と結合させてなるアクリル変性エポキシ樹脂、塩基性化合物及び水性媒体を含有する水性塗料組成物。 - 特許庁
  • In the fuel cell stack 1 to generate electric power by utilizing an electrochemical reaction of hydrogen and oxygen, a voltage difference which is obtained by subtracting the average cell voltage VA from the minimum cell voltage Vmin is calculated (15), and in the case a result of comparing the voltage difference with a first prescribed value is smaller than a prescribed value, a flow rate of an oxidizer gas is made increased (17).
    水素と酸素の電気化学反応を利用して電力を発生する燃料電池スタック1において、最低セル電圧V_minから平均セル電圧V_Aを減算した電圧差を演算し(15)、電圧差を第1の所定値と比較した結果が所定値より小さい場合、酸化剤ガスの流量を増加させる(17)。 - 特許庁
  • When the average value, the cumulative histogram and the median value of pixel values in first image data obtained by reading the radiation image form a photostimulable fluorescent plate 4 are not more than prescribed values, a personal computer main body 25 judges that the image on the basis of the values becomes indistinct, adds second image data and obtains the image of higher image quality.
    パソコン本体25は、輝尽性蛍光体プレート4から放射線画像を読み取って得られる第1の画像データにおける画素値の平均値、累積ヒストグラム、メジアン値が所定値以下であるときに、それに基づく画像が不鮮明になると判断して、第2の画像データを足し合わせ、より高画質な画像を得るようにしている。 - 特許庁
  • The apparatus also calculates the electronic reference point turning value after correction and the moving speed in each electronic reference point, at the same time point at each of the plurality of the different electronic reference point, and the estimation value of high-accuracy coordinates and a new moving speed by four-dimensional integral net average calculation equation, by using the moving speed in the coordinates of the IGS point and in the coordinates.
    また、複数の異なる電子基準点ごとの同一時点における補正後の電子基準点化成値とそれら各電子基準点における移動速度と、IGS点の座標およびその座標における移動速度とを用いて四次元統合網平均計算式により高精度な座標の推定値と新たな移動速度とを算出する。 - 特許庁
  • The invention relates to the low molecular weight heparin salt in which at least 60% by mass in the total mass has molecular weight less than 8000 Da and average molecular weight of 4000-6000 Da, 6.1-7.5wt.%. of organic sulfur content (theoretical value 6.8%) and 42.6-52.1wt.%. of triethanolamine (theoretical value 47.4wt.%.).
    本発明の低分子量ヘパリン塩は、その合計質量の少なくとも60%が8000Da未満の分子量及び4000〜6000Daの平均分子量をもち、6.1〜7.5重量%の有機硫黄含有量(理論値6.8%)及び42.6〜52.1重量%のトリエタノールアミン含有量(理論値47.4重量%)を有する。 - 特許庁
  • The vinyl polymer having a 1,000-5,000 number average molecular weight, a 15-50 acid value, and a 50-180 hydroxy value is produced by polymerizing a raw material mixture comprising a vinyl monomer and a radical polymerization initiator at a polymerization temperature of ≥170°C.
    本発明のビニル系重合体の製造方法は、数平均分子量が1000〜5000であり、酸価が15〜50であり、かつ、水酸基価が50〜180であるビニル系重合体の製造方法であって、ビニル系単量体とラジカル重合開始剤とを含有する原料混合物を、重合温度170℃以上の条件で重合することを特徴とする。 - 特許庁
  • Then, by providing a storage time adjusting means for adjusting storage time so as to fix the average value, accurate time for obtaining an appropriate image is measured and the propriety of continuing human body detection is surely judged.
    そして、平均値が一定となるように蓄積時間を調整する蓄積時間調整手段を設けることで、適正な画像を得るための正確な時間を測定することが可能となって、人体検出の継続可否の判断を確実に行なうことができる。 - 特許庁
  • The polymer latex composition contains a polymer latex with an isoelectric point pH of 3-7 and an alkali-soluble oligomer with an acid value of 120-450 mgKOH/g and weight average molecular weight of 4,000-10,000, and the coating material for the pavement marker contains the polymer latex composition.
    等電点pHが3〜7である重合体ラテックス、および酸価が120〜450mgKOH/g、かつ重量平均分子量が4,000〜10,000のアルカリ可溶性オリゴマーを含有してなる重合体ラテックス組成物、並びに、路面表示用塗料。 - 特許庁
  • For controlling the room and/or floor temperature of a floor heating device in which hot water is circulated in a hot water pipe placed in the floor of the building for supplying heat into the building, an average value A between an outgoing hot water temperature and a returning hot water temperature is used as an index.
    建物の床に敷設した温水管路に温水を循環させて建物内に熱を供給する床暖房装置の、室温および/または床温度を制御するための指標として、往き温水温度と戻り温水温度の平均値Aを指標とする。 - 特許庁
  • In steps S112 and S114, by selecting only resonance frequencies in already set selection range, α resonance frequencies are stored and in a step S116, an average value of selected data is set as a finally smoothed rotation state amount and used for estimation of the tire air pressure.
    ステップS112、S114で、既に設定された選別範囲内にある共振周波数のみを選別してα個蓄積し、ステップS116でこの選別データの平均値を最終的な平滑化された回転状態量としてタイヤ空気圧推定に用いる。 - 特許庁
  • The shock absorbing material of the vehicle exterior trim member is made of a polyolefine system resin foaming body sheet of 0.05-0.5 g/cc in density, 1.1-5.0 in an average value of an aspect ratio Dz/Dxy of a cell inherently existing in a central layer and 5 mm or more in thickness.
    車輌外装部材の衝撃吸収材は、密度が0.05〜0.5g/ccであり、中央層に内在するセルのアスペクト比Dz/Dxyの平均値が1.1〜5.0であり、厚みが5mm以上であるポリオレフィン系樹脂発泡体シートからなる。 - 特許庁
  • F(θ)=C[1+ηcos2(θ-α)]...(1) wherein θ is the fracture toughness at an angle θ based on the paper-making direction; C is the average value of the fracture toughness; α is the anisotropy angle of the fracture toughness; and η is the anisotropy index of the fracture toughness.
    F(θ)=C[1+ηcos2(θ—α)] (式1) ここで、F(θ)は紙の抄紙方向に対する角度θにおけるフラクチャータフネス、Cはフラクチャータフネスの平均値、αがフラクチャータフネスの異方性角度であり、ηがフラクチャータフネスの異方性指数である。 - 特許庁
  • The electrostatic latent image developing toner is composed of at least a binder resin, a charge control agent and a coloring agent, wherein the volume average grain size is 1 to 4 (μm) and the absolute value of the surface charge density is ≥45 (μC/m^2).
    少なくとも結着樹脂、帯電制御剤、着色剤からなる静電潜像現像用トナーにおいて、体積平均粒径が1〜4(μm)であり、表面電荷密度の絶対値が45(μC/m^2)以上であることを特徴とする静電潜像現像用トナー。 - 特許庁
  • The adhesive composition contains an acrylic resin obtained by graft-polymerizing (meth)acrylate to a backbone polymer containing an acidic functional group and a glycidyl ether group and having a number average molecular weight of 20,000-500,000 and an acid value of 1-50 mgKOH, an epoxy resin, an imidazole compound or a sulfonium compound.
    酸性官能基とグリシジルエーテル基を含有する幹ポリマーに(メタ)アクリル酸エステルをグラフト重合した、数平均分子量2〜50万、酸価が1〜50mgKOHのアクリル樹脂とエポキシ樹脂、イミダゾール化合物またはスルホニウム化合物を含む、接着剤組成物。 - 特許庁
  • Then, the region of interest is set to the tomographic images of the object, and the TIC images indicating the average luminance value of entire pixels in the region of interest in the successively generated tomographic images of the object are generated so as to correspond to the time base of the acquisition of the echo signals.
    そして、被検体の断層画像に関心領域を設定し、エコー信号を取得した時間軸に対応するように、順次生成された被検体の断層画像において関心領域における全画素の平均輝度値を示すTIC画像を生成する。 - 特許庁
  • (A) The pigment contains ≥20 wt.% of C.I. Pigment Orange 38, an average particle diameter r (nm) of (A) the pigment is 50≤r≤200, and (B) the dispersant is an acrylic block copolymer having an amine value of >0 mgKOH/g obtained through living polymerization.
    (A)顔料がC.I.ピグメントオレンジ38を20重量%以上含み、(A)顔料の平均粒径r(単位nm)が50≦r≦200でありそして(B)分散剤がリビング重合を経て得られる、アミン価(単位mgKOH/g)>0のアクリル系ブロック共重合体である。 - 特許庁
  • In a case where a brightness average value determining section 82 determines that noise does not exist or is few, a complicated noise removal processing section 84 does not execute complicated noise removal processing, but a simple noise removal processing section 83 executes only simple noise removal processing.
    明度平均値判定部82において、ノイズがないまたは少ないと判断した場合、複雑ノイズ除去処理部84において複雑なノイズ除去処理を実施すことなく、単純ノイズ除去処理部83において単純なノイズ除去処理のみを実施する。 - 特許庁
  • This inkjet recording ink is characterized by comprising water and a pigment dispersed with a block polymer having an acid value of 50 to 120 mgKOH/g and a weight-average mol.wt. of 20,000 to 120,000.
    本発明のインクジェット記録用インクは水と、少なくとも50mgKOH/g以上120mgKOH/g以下の酸価を有する、重量平均分子量20000以上120000以下のブロックポリマーを用いて分散された顔料とを含むことを特徴とする。 - 特許庁
  • The packet receiving apparatus is further includes a jitter measuring section 106 which measures jitter and derives statistic probability distribution constituted of the jitter and the number of times (frequency), and on the basis of the jitter average maximum value and jitter standard deviation, the reception buffer size determination section 105 determines the reception buffer size.
    また、ジッタを計測し、該ジッタとその回数(度数)とからなる統計的な確率分布を導出するジッタ計測部106を更に有し、受信バッファサイズ決定部105は、ジッタ平均最大値及びジッタ標準偏差に基づいて、受信バッファサイズを決定する。 - 特許庁
  • In the grain oriented silicon steel sheet, oriented the average value of D sin β is ≤0.2 mm, with respect to the submergence angle β of an axis of easy magnetization forming the smallest angle with the surface of the steel sheet and a grain diameter D (mm).
    方向性電磁鋼板の各結晶粒において、鋼板表面と最も小さい角をなす磁化容易軸の潜り角βと結晶粒径D(mm)に対して、D sinβの平均値が0.2mm以下であることを特徴とする高加工性方向性電磁鋼板。 - 特許庁
  • A differential voltage calculator 56 calculates a difference between an average voltage value of an extracted practical welding voltage V1 and an arc reference voltage, and obtains an operation direction of a welding torch 11 and a torch operation amount by using a torch operation direction discriminator 57 and a torch operation amount calculator 60.
    差電圧算出器56は抽出した実溶接電圧V1の平均電圧値とアーク基準電圧との差を算出し、トーチ動作方向判定器57及びトーチ動作方向判定器57により、溶接トーチ11の動作方向とトーチ動作量を得る。 - 特許庁
  • The distribution of a vertical coercive force in an optional point in the medium surface of the recording layer is made to be in a range of an average value ±10% by introducing process gases containing oxygen from gas introducing port arranged concentrically to a substrate center when the recording layer is formed.
    また、記録層の形成時、基板中心に対し同心円状に並ぶ気体導入口より酸素を含むプロセスガスを導入することにより、記録層の媒体面内の任意の点における垂直保磁力の分布を、平均値の±10%以下とする。 - 特許庁
  • To provide a common rail type fuel injection device to calculate an average value of common rail pressures, lowered due to injection of fuel and in a pulsation state, as the net pressure of a common rail after injection of fuel, and accurately determines a fuel injection amount.
    この発明は、燃料噴射に起因して降下したが脈動状態にあるコモンレール圧力の平均値を、燃料噴射後の正味のコモンレールの圧力として算出し、燃料噴射量を正確に求めるコモンレール式燃料噴射装置を提供する。 - 特許庁
  • The thermoplastic polyurethane resin has an acid value of less than 5 mgKOH/g and a weight average molecular weight of 80,000-800,000.
    熱可塑性ポリウレタン樹脂と、エポキシ樹脂と、エポキシ樹脂硬化剤とを含有する接着剤組成物であって、前記熱可塑性ポリウレタン樹脂の酸価が5mgKOH/g未満であり、かつ、重量平均分子量が80,000〜80,0000であることを特徴とする接着剤組成物。 - 特許庁
  • The ink for inkjet recording contains a resin fine particle in a pigment covering layer, and contains a dispersion having an average particle diameter of 20-200 nm and a polymer fine particle having a glass transition temperature of -10°C or lower and an acid value of 100 mgKOH/g or lower.
    顔料被覆層に樹脂微粒子を含み、平均粒径が20nm以上200nm以下の分散体と、ガラス転位温度が−10℃以下で、且つ酸価が100mgKOH/g以下である高分子微粒子を含んでなるインクジェット記録用インク。 - 特許庁
  • Alternatively, the method for producing the sheet glass in this invention comprises a stage where a base material glass sheet is worked in such a manner that the average surface roughness at the side face in the sheet glass reaches a prescribed value or below in accordance with the section modulus of the sheet glass to be produced.
    また、本発明に係る薄板ガラスの製造方法は、製造する薄板ガラスの断面係数に応じて該薄板ガラスの側面の平均表面粗さが所定値以下となるように母材ガラス板を加工する工程を含むことを特徴とする。 - 特許庁
  • A size of a magnetic aggregate present in the magnetic layer is 0.5 μm or higher, and the number of magnetic aggregates having magnetic intensity larger by 20 times or more than an average value of magnetization disturbance obtained from a magnetic force image by a magnetic force microscope is 100/2000 μm^2.
    前記磁性層中に存在する磁気凝集体の大きさが0.5μm以上であり、かつ磁気力顕微鏡による磁気力像から得られた磁化乱れの平均値の20倍以上の磁気強度を有する前記磁気凝集体の個数が100個/2000μm^2以下である。 - 特許庁
  • Further the release conditions of the standby condition to hold the moving average hold value are set to enhance the accuracy of the gradual acceleration determination star to gradual acceleration or not, to perform a proper control of injection amount relative to the change amount of the degree of throttle opening.
    さらに、移動平均保持値を保持する待機状態の解除条件を設けることにより、緩加速が開始されるか否かの緩加速判定の精度を高めてスロットル開度の変化量に対して適切な噴射量の制御を行うことができる。 - 特許庁
  • In a blue subfield, the scanning pulses are simultaneously applied to two adjacent lines through the scanning line 11 (thick solid line in Fig.(a)) and the voltage corresponding to the average value of the blue pixel data of the two lines is applied to the data line 12 of the TFT matchingly with the timing.
    一方、青のサブフィールドにおいては、隣り合う2ラインへ同時に走査パルスを走査線11を介して印加し(図3(a)の太実線)、そのタイミングに合わせてTFTのデータ線12に、この2ラインの青の画素データの平均値に応じた電圧を印加する。 - 特許庁
<前へ 1 2 .... 69 70 71 72 73 74 75 76 77 .... 86 87 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.
  • 経済産業省
    Copyright Ministry of Economy, Trade and Industry. All Rights Reserved.