「command」を含む例文一覧(31362)

<前へ 1 2 .... 255 256 257 258 259 260 261 262 263 .... 627 628 次へ>
  • To provide a terminal adapter device with which a user can perform number display setup without inputting a PB command.
    利用者がPBコマンド入力することなしでナンバーディスプレイ設定の設定を行うことのできるターミナルアダプタ装置を提供する。 - 特許庁
  • A CPU 56 sequentially transmits a variation pattern command based on an ex ante determination result for every time of producing start winning A-D.
    CPU56は、始動入賞A〜Dが発生する毎に事前判定の結果にもとづく変動パターンコマンドを順次送信する。 - 特許庁
  • To provide a method, by which the yield is enhanced in an apparatus for information processing which executes a simulation of an apparatus controlled, using a control command.
    制御コマンドによって制御された装置のシミュレーションを実行する情報処理装置において、歩留まりを向上させる。 - 特許庁
  • The movable body receives the command from the remote operation terminal with a photodetector and receives the ultrasonic wave with an ultrasonic receiver.
    移動体は遠隔操作端末からのコマンドをホトディテクタで受信するとともに超音波を超音波受信器で受信する。 - 特許庁
  • To improve the communication quantity and the performance of the whole system while shortening the waiting time after command transmitting period.
    コマンド送信期間後の待機期間を短縮して通信品質の向上と通信及びシステム全体のパフォーマンスの向上を図る。 - 特許庁
  • To enable printing of a character row along a path on the basis of the path and the character row designated by a received command.
    受信した命令により指定されたパスと文字列に基づいて、パスに沿って文字列を印刷することを可能とする。 - 特許庁
  • The mobile communication terminal 200 operates, in accordance with the control command 603 received by the proximity wireless communication unit (step S513).
    モバイル通信端末200は、近接無線通信部により受信された制御コマンド603に従って動作する(ステップS513)。 - 特許庁
  • The stolen vehicle tracing device after receiving the command actuates the GPS receiver to collect the positional information data for the vehicle.
    この指令を受信した盗難車追跡装置は、GPS受信機を動作させて、車両の位置情報データを収集する。 - 特許庁
  • Thereby, even if a variation time varies when the variation pattern is the same variation pattern, it needs only the use of one variation pattern command.
    これにより、同一変動パターンであれば、変動時間が異なっていても、一の変動パターンコマンドを使用するだけで済む。 - 特許庁
  • The operation command pressure X converted to an electric signal by a hydraulic-electric conversion part 32a is input to the external signal generation part.
    外部信号生成部へは油電変換部32aで電気信号に変換された操作指令圧力Xが入力される。 - 特許庁
  • As the result of the collation, the CPU 201 controls the gain in a speech amplifier 235 according to a matched gain adjustment command.
    この照合の結果、CPU201は、合致したゲイン調整コマンドに従って送話増幅器235のゲインをコントロールする。 - 特許庁
  • Software is respectively arranged in redundant processor units for manufacturing separate DMA command input passages in the redundant processor units.
    ソフトウェアは、別々のDMAコマンド入力経路を冗長プロセッサユニットに作製する冗長プロセッサユニットの各々に設けられる。 - 特許庁
  • To output a printing command to a printing equipment suitable to desired printing quality among a plurality of printing equipments connected to a network.
    ネットワークに接続された複数の印刷機器のうち所望の印刷品質に適した印刷機器に印刷指令を出力する。 - 特許庁
  • As a result, the control apparatus 40 transmits the mode change command 400 to the input device 1 according to the selected icon 4B.
    この結果、制御装置40は、選択されたアイコン4Bに応じて、モード変更コマンド400を入力装置1に送信する。 - 特許庁
  • A task management program 43 designates a task (e.g. residual quantity display task T1) in response to a command issued from a host controller.
    タスク管理プログラム43は、ホストコントローラから発行されるコマンドに応じたタスク(たとえば残量表示タスクT1)を指定する。 - 特許庁
  • An electronic control unit 32 controlling the actuator means 36, 38 as a function of a command given by a driver is provided.
    運転者によって与えられる指令の関数として上記アクチュエータ手段を制御する電子制御ユニット(32)を備える。 - 特許庁
  • A reservation state of a controller 104 is changed from a reservation state to a non-reservation state in response to reception of the command signal.
    制御装置104の予約状態は、コマンド信号の受信に応答して、予約状態から非予約状態に変更される。 - 特許庁
  • Further, its unit is equipped with a master generator (26), and its generator generates a master signal representing the command value of the rotary press (12).
    更にその装置はマスター発生器(26)を備え、その発生器は輪転機(12)の指令値を示すマスター信号を発生する。 - 特許庁
  • To shorten a time from input of a command of start of video recording to start of recording of data in an optical disk recorder.
    光ディスクレコーダにおいて、録画開始の指令が入力されてからデータの記録が開始されるまでの時間を短縮する。 - 特許庁
  • To provide a voice control unit allowing a user to control the function of a processor control machine connectable to a voice processor by use of a voice command.
    ユーザが、音声処理装置に接続可能なプロセッサ制御マシンの機能を音声コマンドにより制御することを可能にする。 - 特許庁
  • An index table indicates that the scenario is described with the command or described using class structure of object-oriented language.
    インデックステーブルは、シナリオが、コマンドにて記述されているか、オブジェクト指向言語のクラス構造体を用いて記述されているかを示す。 - 特許庁
  • A user unit 21 adds authentication information to a command packet for opening an FTP session with a user unit 31 and sends it.
    ユーザ装置21はユーザ装置31とFTPセッションを開くためのコマンドパケットに認証情報を付加して送出する。 - 特許庁
  • A site side control means 24 of a site side terminal equipment 20 controls an operation of a camera means 21 based on a prescribed command.
    現場側端末装置20の現場側制御手段24はカメラ手段21の動作を所定のコマンドに基づいて制御する。 - 特許庁
  • The input data buffer 102 is enabled again, when the automatic refreshing is finished, in a mode which causes no spurious command to be generated.
    入力バッファ102は、発生されるスプリアスコマンドを引き起こさない態様で自動リフレッシュの終了時に再度イネーブルされる。 - 特許庁
  • (iii) The subjects, time and other training methods for training the candidates for pilots in command and candidates for check pilots shall be adequate.
    三 機長候補者及び査察操縦士候補者の訓練の課目、時間その他訓練方法が適切なものであること。 - 日本法令外国語訳データベースシステム
  • (b) Methods of handling, maintenance, remodeling, and test of piston engine, piston engine accessory, and piston engine's command system
    ロ ピストン発動機、ピストン発動機補機及びピストン発動機の指示系統の取扱い、整備方法、改造方法及び試験方法 - 日本法令外国語訳データベースシステム
  • (b) Methods of handling, maintenance, remodeling, and test of turbine engine, turbine engine accessory, and turbine engine's command system
    ロ タービン発動機、タービン発動機補機及びタービン発動機の指示系統の取扱い、整備方法、改造方法及び試験方法 - 日本法令外国語訳データベースシステム
  • When it is judged that there is, the printing is started from the non-used portion of the ink layer upon the next print command.
    インク層に未使用部分があると判定した場合は、次のプリント指示では、インク層の未使用部分からプリントを開始する。 - 特許庁
  • The CPU on the base circuit transmits the variation pattern command accompanying the ready for win state at a higher rate until the end of the specified period.
    基本回路上のCPUは、特定期間終了まで高い割合で、リーチ状態を伴う変動パターンコマンドを送信する。 - 特許庁
  • The display device 3 requests a list of menu screens from the video output device 2 by using a command transmitter/receiver 33 (S401).
    表示装置3は、コマンド送受信部33から映像出力装置2に対し、メニュー画面のリストを要求する(S401)。 - 特許庁
  • The deviation signal is input to a control calculator 28, and a valve lift command value 29 to a drum water level control valve is output from the calculator 28.
    偏差信号を制御演算器28に入力し、ドラム水位制御弁への弁開度指令値29を出力する。 - 特許庁
  • Besides, throughput of a command memory can be improved because of the parallel processing of the pipeline stage IF0 and IF1.
    また、パイプラインステージIF0とIF1とが並列に行なわれるため、命令メモリのスループットを向上させることが可能となる。 - 特許庁
  • To provide a data transfer device for preventing time-out of a command waiting to be executed from occurring.
    本発明の課題の一側面は実行待ちコマンドのタイムアウトの発生を防止するためのデータ転送装置を提供することである。 - 特許庁
  • The standby time can be estimated in response to the decided possibility for the stall state prior to the transmission of the flash command.
    フラッシュ・コマンドの送信に先立って、失速状態用に判定された可能性に応答して待ち時間を見積もることができる。 - 特許庁
  • The distinction of the treated area and the command value of the output voltage of an electric signal for treatment are each entered by manual operation.
    それぞれマニュアル操作によって,治療部位の区別と治療用電気信号の出力電圧の指令値とが入力される。 - 特許庁
  • The list display unit 62 also displays a list of move interrupt icons, based on the information informed from the command management unit 63.
    またリスト表示部62は、コマンド管理部63から通知された情報に基づいて、ムーブ中断アイコンをリストに表示させる。 - 特許庁
  • A multi-functional machine 1 has a constitution equipped with a plurality of kinds of communication interfaces into which a command can be inputted from an external instrument.
    複合機1は、外部機器から指令を入力可能な複数種類の通信インターフェースを備えた構成をなしている。 - 特許庁
  • To increase the speed of plotting command to a memory, enabling access to the memory per word unit at a high speed, in painting out a rectangular pattern.
    矩形パターンを塗りつぶす際にワード単位で高速にメモリにアクセス可能としてメモリへの描画命令を高速化する。 - 特許庁
  • The sub control means has a performance display control means for receiving a command from the main control means and managing performance control.
    副制御手段は、主制御手段からの指令を受信して演出制御を司る演出表示制御手段を有する。 - 特許庁
  • The control part 1 issues a preparation start command that allows the second character 71 to start the preparation for participating in the event.
    そして、対戦イベントに参加する準備を第2キャラクタ71に開始させる準備開始命令が、制御部1から発行される。 - 特許庁
  • An OPEN command-ready check part 11 starts a file name check module 21 prior to the opening processing and checks the number of the file.
    OPENコマンド対応チェック部11は、オープン処理に先立ってファイル名チェックモジュール21を起動し、ファイル名のチェックを行う。 - 特許庁
  • Moreover, since the image data omission can be compensated with the NULL data, the printer control command sequence can be sustained.
    また、イメージデータの抜けた分をNULLデータによって埋めることができるので、プリンタ制御コマンドのシーケンスが崩れることがない。 - 特許庁
  • When an image is formed, a copy machine 3 takes an ID code specified by a 'user state notice' command into an image.
    複写機3は、画像を形成する際に、「ユーザー状態通知」コマンドによって特定されたIDコードを画像の中に取り込む。 - 特許庁
  • A monitoring part 4 detects a writing command to a disclosure directory in a recording part 2 by means of a writing/reading controlling part 3.
    監視部4は、書込み読出し制御部3による記録部2の公開用ディレクトリに対する書込み命令を検出する。 - 特許庁
  • A current limiter 8 makes the current command value as a limit value, and lowers the limit value according to the drop of the Ef.
    電流制限器8は、Efの低下時に電流指令値を制限値とし、かつ制限値をEfの低下に応じて低下させる。 - 特許庁
  • Then, a process for setting retracting values of various kinds of registers or the like is performed for various kinds of registers, and then, a RET command is performed.
    その後、各種レジスタの退避値を各種レジスタに設定するなどの処理を行った後、RET命令を実行する。 - 特許庁
  • Further, the second information is known in which a relation between the moving direction of the command positions and that of the actual incident positions is prescribed.
    さらに、指令位置の移動方向と、実入射位置の移動方向との関係を規定する第2の情報が既知である。 - 特許庁
  • When the stop symbol is displayed, the stop symbol is displayed to be moved within the display area till receiving the symbol stop command.
    停止図柄が表示されると、図柄停止コマンドを受信するまで停止図柄をその表示領域内で移動表示をする。 - 特許庁
  • The M-th processor processes the command inputted thereto in ST203, when the AM>AL is not satisfied in ST202.
    ST202においてAM>ALでない場合は、ST203において第Mプロセッサが、自身に入力された命令を処理する。 - 特許庁
  • When the stop command is issued, the main control device determines the number of slidings of the reels based on the previously created priority sequence information.
    そして、停止指令が発生した場合には、先に作成した優先順位情報に基づいてリールのスベリ数を決定する。 - 特許庁
<前へ 1 2 .... 255 256 257 258 259 260 261 262 263 .... 627 628 次へ>

例文データの著作権について