「correction coefficient」を含む例文一覧(1486)

<前へ 1 2 .... 20 21 22 23 24 25 26 27 28 29 30
  • Based on an engine speed N and a throttle opening TH, when a basic target supercharge pressure TPTAGTM corresponding to a standard atmospheric pressure is set (S204), an atmospheric pressure correction coefficient KALCOM at supercharge time for decreasingly correcting the basic target supercharge pressure TPTAGTM according to the decrease of atmospheric pressure ALT is set, to regulate upper/lower limits (S205 to S209).
    エンジン回転数Nとスロットル開度THに基づき、標準大気圧対応の基本目標過給圧TPTAGTMを設定(S204)すると、基本目標過給圧TPTAGTMを、大気圧ALTの低下に伴い減少補正するための過給時大気圧補正係数KALCOMを設定して上,下限規制する(S205〜S209)。 - 特許庁
  • An error correction candidate extraction unit 88 generates an error coefficient representing a degree for a value of each bit to be wrong for bits of a predetermined number based on values of bits of the predetermined number transmitted before the present bit and determined by a comparator 87, the delay profile and a comparative value calculated from the separated waveform by a comparative value calculation unit 85 or 86.
    また、誤り訂正候補抽出部88は、現在のビットよりも前に送信され、比較部87により決定済みの所定の数のビットの値と、遅延プロファイルと、比較値算出部85または86が分離波形から算出した比較値に基づいて、所定の数のビットに対し、各ビットの値が誤っている程度を表す誤り係数を生成する。 - 特許庁
  • When it is determined that vehicle speed fluctuation in a prescribed time is in a prescribed range, the integrated value tro2sgm of output deviation of the rear O2 sensor 24 is operated, and catalyst deterioration diagnosis value correction coefficient CATREVISE correcting the first parameter is operated and set as a second parameter indicating degree of deterioration of the catalyst 22.
    更に、所定時間内での車速変動が、所定の範囲内に収まっていると判断された場合、リヤO2センサ24の出力値偏差の積算値tro2sgmを演算し、触媒22の劣化度合いを示す第2のパラメータとして、第1のパラメータを補正する触媒劣化診断値補正係数CATREVISEを演算設定する。 - 特許庁
  • The correction unit 168 corrects a result of deletion supplied from a deletion candidate deleting unit 166 or the reproduction time of each effect of the selected effect supplied from an effect selecting unit 162 by using the scaling coefficient supplied from the unit 167, and matches the total reproduction time of the selected effect with the slide show reproduction time.
    補正部168は、削除候補削除部166より供給された削除結果、またはエフェクト選択部162より供給された選択エフェクトの各エフェクトの再生時間を、スケーリング係数算出部167より供給されたスケーリング係数を用いて補正し、その選択エフェクトの合計再生時間をスライドショー再生時間に一致させる。 - 特許庁
  • A straight line with an inclination k', which is found by multiplying the inclination defined based on deviations DOPT and DLIM between a maximum value and a minimum value each of the objective function F1 and the constraint function F2 by a correction coefficient α defined according to a constant rate A of an engine 200, is set.
    一方、当該適合範囲でパラメータを変化させた場合の、目的関数F1及び制約関数F2各々における最大値と最小値との偏差DOPT及びDLIMに基づいて規定される傾きkに、更にエンジン200の定常比率Aに応じて定まる補正係数αを乗じてなる傾きk’の直線が設定される。 - 特許庁
  • A connection cable 22 is connected to an ODB2 terminals of a vehicle, a control unit 18 acquires information for periodically obtaining instantaneous fuel consumption from the vehicle and information about residual fuel, obtains correct fuel consumption from the consumption amount of fuel obtained from the residual fuel and a travel distance at that time, obtains a correction coefficient, and corrects the instantaneous fuel consumption from then on.
    車両のODB2端子に接続ケーブル22を接続し、制御部18は車両から定期的に瞬間燃費を求めるための情報と残燃料の情報を取得し、残燃料から得た燃料の消費量とその時の走行距離から正確な燃費を求めるとともに補正係数を求め、以後取得した瞬間燃費を補正する。 - 特許庁
  • A basic maximum opening degree THOMXCDRX is calculated according to an engine rotation number NE and an alcohol concentration parameter KREFBS (S14), and a correction coefficient KTHOMXCLD1 is calculated according to an initial cooling water temperature TWINI, which is a cooling water temperature when the engine is started, and an ignition number CTACR after the engine is started (S17).
    エンジン回転数NE及びアルコール濃度パラメータKREFBSに応じて基本最大開度THOMXCDRXを算出し(S14)、機関始動開始時の冷却水温である初期冷却水温TWINI及び始動後の点火回数CTACRに応じて補正係数KTHOMXCLD1を算出する(S17)。 - 特許庁
  • A recording laser power is adjusted by temperature environment of an optical disk and a correction coefficient of the recording laser power generated from recording position information of a radial direction if the optical disk utilizing a laser power adjusting table and recording is performed for the disk, thereby keeping the satisfactory recording quality even when the disk has large warp or the like.
    本発明では、レーザパワー調整テーブルを利用して、光ディスクの温度環境と、光ディスクの半径方向の記録位置情報から生成した記録レーザパワーの補正係数で、記録レーザパワーの調整をし、ディスクに記録を行うことにより上記ディスクに大きな反り等がある場合においても良好な記録品質を保つことができる。 - 特許庁
  • At that time, when a slip detection means M3 detects the slip of a wheel, it prevents vehicle behavior from being disordered so as to generate large deceleration on the road surface having the small friction coefficient and can demonstrate the function of the traveling safety device to the maximum since a correction means M4 restricts the target deceleration to the upper limit value of the deceleration.
    このとき、スリップ検知手段M3が車輪のスリップを検知すると、補正手段M4が前記目標減速度を減速度の上限値に規制するので、摩擦係数が小さい路面で大きな減速度を発生させようとして車両挙動が乱れるのを防止しながら、走行安全装置の機能を最大限に発揮させることができる。 - 特許庁
  • In the image processor, a histogram generation part 122 detects histogram information in an RGB image based on pieces of data about the respective pixels constituting the RGB image and a luminance range calculation part 123 sets the pixels of the RGB image included in a predetermined range of the histogram information detected by the histogram generation part 122 as a color correction coefficient calculation area.
    画像処理装置は、ヒストグラム生成部122がRGB画像を構成する各画素のデータに基づいて、RGB画像におけるヒストグラム情報を検出し、ヒストグラム生成部122が検出するヒストグラム情報の所定範囲に含まれるRGB画像の画素に対し、輝度範囲算出部123が色補正係数算出領域として設定する。 - 特許庁
  • At the time of a receiving operation start, an AGC control part 124 starts an AGC circuit 103 at the AGC circuit starting timing calculated at the time of the previous receiving operation and uses the receiving level correction coefficient initial value calculated at the time of the previous receiving operation to correct the receiving level of the received signal inputted to the AGC circuit 103.
    受信動作開始時には、AGC制御部124は、前回の受信動作時に算出されたAGC回路起動タイミングでAGC回路103を起動し、また、前回の受信動作時に算出された受信レベル補正係数初期値を用いて、AGC回路103に入力された受信信号の受信レベルを補正する。 - 特許庁
  • White pixel defect corrections wherein the added value is subtracted are performed for image signals of respective pixels on vertical lines on a vertical transfer destination side relative to the defective pixel and white pixel defect corrections wherein the value obtained by multiplying the added value by a correction coefficient is subtracted are performed for image signals of respective pixels on the vertical transfer source side relative to the defective pixel.
    欠陥画素より垂直転送先側の垂直ライン上の各画素の画像信号に対しては、上乗値を減算することにより白傷補正を行い、欠陥画素より垂直転送元側の各画素の画像信号に対しては、当該上乗値に補正係数を乗算した値を減算することにより白傷補正を行う。 - 特許庁
  • Air fuel ratio downstream of the catalyst 30 is quickly converged to an appropriate value without causing overshooting or the like by reflecting the learning value RLRN established like that to a control constant (in an embodiment, skip quantity) in operation of air fuel ratio feed back correction coefficient LAMBDA based on output voltage FVO2 of a FO2 sensor 29a.
    そして、このように設定された学習値RLRNを、FO2センサ29aの出力電圧FVO2に基づいて空燃比フィードバック補正係数LAMBDAを演算する際の制御定数(例えば、スキップ量)に反映させることにより、触媒30の下流側の空燃比をオーバーシュート等させることなく速やかに適値に収束させる。 - 特許庁
  • This detector includes a light detection means 4 having a photodetector 3 for receiving light related to the quantity of toner splashing, a splashing quantity calculation means 8 for calculating the quantity of toner splashing, and a calibration means 9 for calculating a correction coefficient for calibrating an output voltage of the photodetector 3 in a reference state that the quantity of toner splashing is estimated to be a predetermined quantity.
    トナー飛散量に関係する光を受光する受光素子3を有する光検出手段4と、トナー飛散量を演算する飛散量演算手段8と、予め定めるトナー飛散量であると推測される基準状態下で、受光素子3の出力電圧を較正するための補正係数を算出する較正手段9とを含む。 - 特許庁
  • A computing unit 13 computes a suppliable capacity of ordinary refuse and wood bio-mass to a gasifying melting furnace 6 by multiplying a storage quantity shown by the storage quantity information stored in a memory unit 14 by a coefficient of correction proportional to a tendency to increase/decrease discharge quantity shown by the statistical information stored in the memory unit 14.
    演算部13は、一般ゴミおよび木質バイオマス各々のガス化灰溶融炉6への供給可能量を、記憶部14に記憶されている貯蓄量情報が示す貯蓄量に、記憶部14に記憶されている統計情報が示す排出量の増減傾向に比例した補正係数を乗算することで算出する。 - 特許庁
  • An increasing period of the steering angular velocity Dθs by rapid steering is very short, but by moderating an increase in the correction coefficient K3 through the filter 97, a reducing period of the deceleration corresponding forced torque Tb is extended relating to the increasing period of the steering angular velocity Dθs, this reduction of the deceleration corresponding forced torque Tb is surely reflected in the behavior of the vehicle.
    急操舵による操舵角速度Dθsの増加期間はごく短いが、フィルタ97により補正係数K3の増加が緩慢となることから、操舵角速度Dθsの増加期間に対して減速対応拘束トルクTbの減少期間が延長化されて、このときの減速対応拘束トルクTbの減少が車両の挙動に確実に反映される。 - 特許庁
  • A standard pseudo flame current value flowing in the pseudo flame circuit A in application of the standard voltage free from dispersion of voltage as AC voltage, is stored in a control means, and a correction coefficient is determined on the basis of the detected current value and the standard pseudo flame current value in non-combustion of the burner to correct the detected current value in combustion of the burner.
    制御手段に、上記交流電圧として電圧にばらつきのない標準電圧を印加したときに擬似炎回路Aに流れる標準擬似炎電流値を記憶させておき、バーナの非燃焼時における検出電流値と標準擬似炎電流値とに基づいて補正係数を求め、バーナ燃焼時の検出電流値を補正する。 - 特許庁
  • The distortion compensating power amplifier includes: a test pattern addition part 10 for adding a test pattern to an input signal Vin; a predistortion part 20 for applying distortion compensation processing using a distortion correction coefficient for canceling distortion during amplification to the test pattern-added input signal Vin to generate predistortion signal; and an amplification part 30 for amplifying the predistortion signal.
    入力信号Vinにテストパタンを付加するテストパタン付加部10と、テストパタンが付加された入力信号Vinに、増幅時の歪みを打ち消すための歪み補正係数を用いて歪み補償処理を施してプリディストーション信号を生成するプリディストーション部20と、プリディストーション信号を増幅する増幅部30と、を備える歪み補償電力増幅器である。 - 特許庁
  • The ECU 100 calculates an interval θint prescribing a time interval between main injection and pilot injection corresponding to the optimum swirl ratio SR in accordance with an expression θint=C'×θ/SR when a correction coefficient prescribing the position relationship between spray of main injection and spray of pilot injection is C', and injection operation of an injector 209 is controlled.
    一方、ECU100は、メイン噴射の噴霧とパイロット噴射の噴霧との位置関係を規定する補正係数をC’とした場合に、係る最適なスワール比SRに対応するメイン噴射とパイロット噴射との時間間隔を規定するインタバルθintを、「θint=C’×θ/SR」なる式に従って算出し、インジェクタ209の噴射動作を制御する。 - 特許庁
  • A color deviation estimating means 105 displays a plurality of example images, having color deviation about a standard color image 113 which is photographed in a studio, etc., and has a small color deviation, on output equipment by processing the standard color image reversely to correction and estimates a color deviation coefficient 20 from an example image which is selected by the user and considered to have a small color deviation.
    色ずれ推定手段105は、スタジオ等で撮影した色ずれの少ない標準カラー画像113に対して補正の逆の処理を行って標準カラー画像から色ずれした複数の例示画像を出力機器に表示し、利用者が選択した色ずれが小さいと思われる例示画像から色ずれ係数201を推定する。 - 特許庁
  • After the start of the operation, the Raman amplifier uses an ASS light calculation circuit 33 to calculate the ASS light power corresponding to the supply power of the stimulation light in accordance with the model expression applied with the above coefficient, performs the correction of the output light power measured in the output light power monitor section 20 and performs ALC, shutdown control, etc., based on the corrected output light power.
    そして、運用開始後には、上記の係数を適用したモデル式に従って、励起光の供給パワーに対応したASS光パワーをASS光演算回路33で算出して出力光モニタ部20で測定される出力光パワーの補正を行い、その補正された出力光パワーに基づいてALCやシャットダウン制御等を行う。 - 特許庁
  • In the decoding process of JPEG2000 encoded data, a detile processing section 111 corrects specific high-pass coefficients in the vicinity of tile boundary by a coefficient correction means 112 in order to suppresses tile boundary distortion produced under impact of mirroring when wavelet conversion is performed sequentially for the wavelet coefficients of each component from upper layer toward lower layer.
    JPEG2000符号化データの復号の過程において、デタイル処理部111は、各コンポーネントのウェーブレット係数に対し、その上位の階層から下位の階層へ向かって順に、ウェーブレット変換の際のミラリングの影響により生じたタイル境界歪みを抑制するためにタイル境界付近の特定のハイパス係数を係数補正手段112によって補正する。 - 特許庁
  • By selecting a polynomial to approximate a data stream in row for the data stream in the row, storing a coefficient of the polynomial in the memory device and also storing in the memory device the correction value to express difference with an integer with less than eight bits between each of the data comprising the data stream in the row and the value by the polynomial, the original data is accurately restored with the efficient memory.
    一連のデータ列に対して当該一連のデータ列を近似する多項式を選択し、当該多項式の係数を記憶装置に記憶するとともに、前記一連のデータ列を構成する個々のデータと多項式による値との差異を8ビット以下の整数値で表す補正値を記憶装置に記憶することにより、効率的に記憶するとともに正確に元のデータを復元する。 - 特許庁
  • Thereafter, each of a plurality of pieces of imaging data obtained by a plurality of imaging sequences IS is corrected using a correction coefficient corresponding to a time interval between a first imaging sequence IS1 having obtained each of the imaging data and a second imaging sequence IS2 carried out before the first imaging sequence IS1, and a slice picture is generated from the plurality of pieces of corrected imaging data.
    その後、複数のイメージングシーケンスISにおいて得られた複数のイメージングデータのそれぞれを、そのイメージングデータのそれぞれを得た第1のイメージングシーケンスIS1と、その第1のイメージングシーケンスIS1の前に実施された第2のイメージングシーケンスIS2との時間間隔に対応した補正係数を用いて補正し、その補正した複数のイメージングデータからスライス画像を生成する。 - 特許庁
  • To provide a MIMO wireless signal transmission system and a method for more effectively exhibiting error capability of soft decision error correction decoding, by multiplying an MLD determination signal for each transmitted signal t_j by a magnitude of a transfer coefficient h_ij through which each signal t_j passes, that is, a likelihood weighting factor with SNR of each transmitted signal t_j reflected.
    各送信信号t_jに対するMLD判定信号に対して、各送信信号t_jが経由する伝達係数h_ijの大きさ、すなわち、各送信信号t_jのSNRを反映させた尤度重み係数を乗算することにより、軟判定誤り訂正復号の誤り能力をより効果的に発揮させるMIMO無線信号伝送システム及び方法を提供する。 - 特許庁
  • An ethanol concentration estimation section 104 functioning as one function block of the ECU 100 acquires a fuel pressure feedback correction coefficient FBP by which a basic demand charge quantity of a high-pressure pump 217 is multiplied in a fuel pressure feedback control to be executed to maintain the fuel pressure in a common rail 218 for supplying high-pressure fuel to the direct-injection injector 220 at a target level.
    当該処理において、ECU100の一機能ブロックとして機能するエタノール濃度推定部104は、直噴インジェクタ220に高圧燃料を供給するコモンレール218内部の燃圧を目標圧に維持すべく実行される燃圧フィードバック制御において、高圧ポンプ217の基本要求吐出量に乗じるべき燃圧F/B補正係数FBPを取得する。 - 特許庁
  • The transfer voltage controlling means (40) inputs temperature information from a measuring means for measuring the temperature of the inside of the device, and at the time of judging that the temperature is lower than a reference temperature, changes secondary transfer voltage to be controlled in accordance with the synthetic resistance of a secondary transfer part to higher voltage by a prescribed value (multiplied by an output correction coefficient).
    転写電圧制御手段(40)が、装置内の温度を測定する測定手段からの温度情報を入手し、その装置内温度が基準温度よりも低いと判断したときには、二次転写部の合成抵抗に応じて制御する二次転写電圧を所定量(出力補正係数をかける分)だけ高い電圧に変更する制御を行うように構成した。 - 特許庁
  • A video signal is inputted and a state wherein the signal level is larger or smaller than a specified value successively by a specified number of pixels is detected, and multiplication by a correction coefficient calculated based upon the rate of detected pixels whose signal levels are larger than the specified value and the rate of detected pixels whose signal levels are smaller than the specified value is applied to correct the signal level of the video signal.
    映像信号を入力し、所定の画素数連続して信号レベルが所定値以上、または、所定値以下であることを検出し、該信号レベルが所定値以上であることを検出した画素の割合と、所定値以下であることを検出した画素の割合との比率に基づいて算出される補正係数を乗算して前記映像信号の信号レベルを補正する。 - 特許庁
  • From a plurality of stage position information sampled at a constant time interval, a tracking correction coefficient (=stage movement amount/sampling time) equal to a momentary stage speed is detected, and the stage speed data is inputted in an integrator, and while controlling so that the integrator is reset for each sampling, a final output voltage is added to a beam polarization voltage for correcting a beam position.
    一定の時間間隔でサンプリングされた複数のステージ位置情報から瞬間的なステージ速度と等価のトラッキング補正率(=ステージ移動量/サンプリング時間)を検出し、そのステージ速度データを積分器に入力して、サンプリング毎に積分器がリセットされるように制御しつつ、最終の出力電圧をビーム偏向電圧に加算してビーム位置を補正する。 - 特許庁
  • An ECU 30 computes the sensor output ratio α as the ratio between the intake air oxygen concentration sensor output and the previously stored intake air oxygen concentration sensor output, when purge operation in not performed during the engine operation, and computes the temporary coefficient of learning correction efkg=RA/RT by using a real exhaust air-fuel ratio RA and a target air-fuel ratio RT.
    ECU30は、機関運転中に吸気酸素濃度センサ出力と、予め記憶したパージ非実行時の吸気酸素濃度センサ出力との比であるセンサ出力比αを算出するとともに、排気空燃比センサで検出した実際の排気空燃比RAと目標空燃比RTとを用いて、仮の学習補正係数efkgをefkg=RA/RTとして算出する。 - 特許庁
  • When determined that the acceleration is from the deceleration, the output restriction Wout is set as a value obtained by adding an output correction amount ΔW obtained by multiplying the accelerator variation ΔAcc and the coefficient α together to the basic output restriction Wobase until the predetermined time set at the time etc. corresponding to the time required to reach the required rotation speed from starting the engine (S110-S140).
    減速からの加速と判定したときには、エンジンを始動して必要な回転数にするまでに要する時間に相当する時間などに設定された所定時間が経過するまでは、アクセル変化量ΔAccに係数αを乗じて得られる出力補正量ΔWを基本出力制限Wobaseに加えた値として出力制限Woutを設定する(S110〜S140)。 - 特許庁
  • This prediction method determines the correlation between analysis stress in the stress-concentrating section determined by analysis, when a predetermined fixed load is charged on the resin molded article having a geometrical stress-concentrating section and a correction coefficient for making the analysis stress in a predetermined breaking period approach the analysis stress, in a resin test piece that does not have geometrical stress-concentrating section during a similar breaking period.
    形状的な応力集中部を備える樹脂成形品に対して所定の一定荷重を加えた場合に解析により得られる応力集中部での解析応力と、所定の破壊時間での上記解析応力を同様の破壊時間での形状的な応力集中部を備えない樹脂試験片での解析応力に近づけるための補正係数との間の相関関係を求める。 - 特許庁
  • The Reed-Solomon decoder includes a coefficient calculation section 102 for calculating correction coefficients for correcting coefficients of an error locator polynomial and coefficients of an error value polynomial for the last codeword with the use of the size of the last codeword in accordance with a difference between a base size of Reed-Solomon codewords and the size of the last codeword before error detection starts on the codeword located just before the last codeword in the data part.
    リードソロモン復号器は、データ部において最終符号語の1つ前に配置される符号語に関する誤り検出が開始するよりも前に、リードソロモン符号語のベースサイズと最終符号語のサイズとの差分に応じて最終符号語の誤り位置多項式の係数及び誤り数値多項式の係数を補正するための補正係数を最終符号語のサイズを用いて計算する係数計算部102を含む。 - 特許庁
  • When two elements are merged by the optimizing and learning method for the neural network which optimizes the neural network by performing learning and compact structuring alternately, subsequent learning and compact structuring are carried out by using a new weight coefficient correction expression generated by combining the weight coefficients and inertia items of an existent element and an element to be corrected.
    学習とコンパクト構造化とを交互に行ってニューラルネットワークを最適化するニューラルネットワークの最適化学習方法において、2個の素子を融合する場合に、存続する素子と修正する素子のそれぞれの重み係数および慣性項を組み合わせて生成した新たな重み係数修正式により以後の学習およびコンパクト構造化を行うニューラルネットワークの最適化学習方法とする。 - 特許庁
  • A stoichiometric cylinder intake air amount GAIRSTD is calculated based on intake pressure PBA and an intake temperature TA, volumetric efficiency ηv'(=GAIRCYLP(k)/GAIRSTD(k)) is calculated by using the stoichiometric cylinder intake air amount GAIRSTD, and the volumetric efficiency ηv' is corrected by using a lift amount correction coefficient KLIFT set according to an intake valve lift amount LIFT to calculate predicted volumetric efficiency ηva.
    吸気圧PBA及び吸気温TAに基づいて理論気筒吸入空気量GAIRSTDが算出され、理論気筒吸入空気量GAIRSTDを用いて体積効率ηv’(=GAIRCYLP(k)/GAIRSTD(k))が算出され、吸気弁リフト量LIFTに応じて設定されるリフト量補正係数KLIFTを用いて体積効率ηv’を補正することにより予測体積効率ηvaが算出される。 - 特許庁
  • The water correction coefficient in the two-dimensional detection means is shifted according to the quantity of inclination, so that an appropriately water-corrected image can be reorganized regardless of the height position of the lifting means.
    2次元検出手段と、X線発生手段と、被検体回転手段と、2次元検出手段の昇降手段と、水補正係数保存手段と、再構成手段とからなるCT装置において、昇降手段の高さ位置に対する回転手段の回転軸と昇降手段の昇降軸の傾き量を保存する手段と有し、前記傾き量に従って2次元検出手段中の水補正係数を変更(シフト)することを特徴とし、昇降手段の高さ位置に関係なく適切な水補正がされた画像を再構成することができる。 - 特許庁
<前へ 1 2 .... 20 21 22 23 24 25 26 27 28 29 30

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.