「current-source」を含む例文一覧(7159)

<前へ 1 2 .... 68 69 70 71 72 73 74 75 76 .... 143 144 次へ>
  • When the difference of input and output voltages exceeds a threshold, the source follower is operated, and an operating current is interrupted below the threshold, thus reducing a power consumption.
    入出力電圧の差がしきい値を超えるとソースホロワが動作し、しきい値以下では動作電流が遮断されるので、消費電力が小さい。 - 特許庁
  • To improve the on current of a PMOS transistor by forming a SiGe layer in the source/drain diffusion layer of the PMOS transistor without increasing the number of masks.
    マスク数を増やすことなく、PMOSトランジスタのソース/ドレイン拡散層内にSiGe層を形成することで、PMOSトランジスタのオン電流を向上する。 - 特許庁
  • To surely detect a defect of power source current at the standby time of a data processing section in a semiconductor memory having a memory array and the data processing section.
    メモリアレイおよびデータ処理部を有する半導体記憶装置としてデータ処理部の待機時電源電流不良を確実に検出可能にする。 - 特許庁
  • To provide a constant current source circuit for reliably actualizing flat temperature property regardless of whether the temperature coefficient of a resistor is great or small or positive or negative.
    抵抗の温度係数の大小、あるいはその正負にかかわらず、確実に平坦な温度特性を実現できる定電流源回路を提供する。 - 特許庁
  • The electric circuit has a function capable of setting a potential difference between the both electrodes of the capacitance element by using a constant-current source.
    そして本発明は、容量素子の両電極間の電位差を定電流源を用いて設定できる機能を有する電気回路を提供する。 - 特許庁
  • To prevent level elevation at the time of a power down mode where the current consumption of a cell array power source generated by voltage drop in the inside becomes almost 0 in a dynamic memory.
    ダイナミックメモリにおいて、内部で降圧して生成されるセルアレイ電源の消費電流がほぼ0になるパワーダウンモード時のレベル上昇を防止する。 - 特許庁
  • To provide a semiconductor device equipped with a Schottky source/drain for preventing the deterioration of the reliability of a gate insulating film or the deterioration of current driving capability.
    ゲート絶縁膜の信頼性低下、及び電流駆動能力低下の問題のない、ショットキーソース・ドレインを備える半導体装置を提供する。 - 特許庁
  • A weak constant current source is connected across the electrodes of a strip for electrochemical diagnosis to monitor the potential difference between the electrodes.
    電気化学的測定法は、適用された試料が電気化学的セルの電極間の隙間を架橋する時刻を著しい精度で決定するための方法を含む。 - 特許庁
  • A sub- threshold current flowing in a CMOS circuit of the semiconductor circuit is reduced by providing a power source switch to be turned off at the time of standby.
    待機時にオフとされる電源スイッチを設けることにより、半導体集積回路のCMOS回路に流れるサブスレッショルド電流を低減する。 - 特許庁
  • It is equipped with an inverter circuit, interposed between the power source and the electromagnetic induction coil and supplying an alternating current to the electromagnetic induction coil based on a control signal.
    電源と電磁誘導コイルとの間に介挿され、制御信号に基づいて電磁誘導コイルに交番電流を供給するインバータ回路を備える。 - 特許庁
  • The bias circuit 15 supplies a bias voltage VB to the gate of a transistor M7 constituting the constant-current source I1 of the amplifier 11.
    そして、差動増幅器11の定電流源I1を構成するトランジスタM7のゲートにバイアス電圧VBを供給するバイアス回路15が設けられている。 - 特許庁
  • When detecting the impedance, an output voltage Va of the alternating current voltage source 23 is varied to both positive and negative sides, and a sensor terminal voltage is measured therein.
    インピーダンス検出に際し、交流電圧源23の出力電圧Vaが正負両側に変化し、その時のセンサ端子電圧が計測される。 - 特許庁
  • To provide an electron emission device restricting a fluctuation of emission current with simple structure and high reliability, and to provide an electron source and an image forming apparatus.
    単純な構成で放出電流揺らぎを抑制する信頼性の高い電子放出素子および電子源および画像形成装置を提供する。 - 特許庁
  • Thus, a current that flows from the photoreceptor drum to the development roller quickly flows to a ground through a source terminal S, a drain terminal D, and a resistor R6.
    これにより、感光体ドラムから現像ローラに流れ込む電流は、ソース端子S、ドレイン端子D、抵抗R6を通じてグランドへ速やかに流れる。 - 特許庁
  • A supply compensated current and voltage source utilizes a differential amplifier 106 connected to a band-gap reference voltage and a scaled power supply voltage.
    電源補償電流および電圧源は、バンドギャップ基準電圧およびスケールされた電源電圧に接続された差動増幅器106を利用する。 - 特許庁
  • To reduce current consumption when instruction signals for driving a load are not input in the case of driving the load with a battery as a power source.
    電池を電源として負荷を駆動する場合において、負荷を駆動するための指示信号が入力されていない時の消費電流を削減する。 - 特許庁
  • After the power source 14 converts input electric power to a predetermined direct current voltage which is supplied to each section in the surveillance device 1 as operation electric power.
    電源部14は入力した電力を所定の直流電圧に変換した後、監視装置1内の各部の動作電源として供給する。 - 特許庁
  • To provide an MOS transistor having a high source-drain breakdown voltage BVds and high current driving capability even at a low on-resistance.
    高いソース・ドレイン耐圧BVdsを有するとともに、低いオン抵抗であって電流駆動能力の高いMOSトランジスタを提供することを目的とする。 - 特許庁
  • Thus, the gasket can give a return path to a noise current source for all directions and reduce EMI emission more effectively.
    このようにして、ガスケットは、雑音電流のすべての方向について雑電流源に戻る戻り経路を与え、EMI放出を一層有効に減らす。 - 特許庁
  • METHOD OF MIGRATING ELECTRONIC DEVICE OPERATING FROM SOURCE MODE TO TARGET TECHNOLOGY(METHOD OF MIGRATING CURRENT MODE OPERATION ELECTRONIC DEVICE TO TARGET TECHNOLOGY)
    電子デバイスをソース技術からターゲット技術に移行する方法及びコンピュータ・プログラム(電流モード動作電子デバイスをターゲット技術に移行する方法) - 特許庁
  • To provide an electroluminescent element with a ferroelectric electron emission source which secures stable high current even at a low operating voltage.
    低い動作電圧でも安定した大電流を得ることができるようにした強誘電体電子放出源を有する電界発光素子を提供する。 - 特許庁
  • A converter 1 constituted of switches Q1 to Q6, diodes D1 to D6, and capacitors C1 to C6 is connected with an alternating current power source AC through boosting reactors L1 to L3.
    スイッチQ1 〜Q6 とダイオードD1 〜D6 とコンデンサC1 〜C6 とから成るコンバータ1を昇圧用リアクトルL1 〜L3 を介して交流電源ACに接続する。 - 特許庁
  • An inverter amplifier of the present invention comprises a voltage variation prevention circuit at the gate terminal of a field effect transistor that is a constant current source constituting the amplifier.
    本発明のインバータアンプは、アンプを構成する定電流源である電界効果型トランジスタのゲート端子に電圧変動防止回路を備えている。 - 特許庁
  • To provide an engine starting control system capable of certainly protecting a power source regardless of the level of a short current when short-circuit is generated in an immobilization amplifier.
    イモビアンプにショートが発生した場合に、ショート電流のレベルによらず確実に電源保護を図ることができるエンジン始動制御システムを提供する。 - 特許庁
  • Further, by making drive circuits 22, 23, 62-65 share a power source with each other, the small sized molding machine small in the maximum current can be realized.
    また、各駆動回路22,23,62〜65の電源を共通にすることで、小形で而も最大電流の小さい成形機を実現することもできる。 - 特許庁
  • Then, a reactor 4 for blocking surge voltage is inserted between the second terminal 5b of the insulated transformer 5 and a terminal part A of the direct-current power source 1.
    そして、絶縁変圧器5の第2の端子5bと直流電源1の端子部Aとの間にサージ電圧ブロック用のリアクトル4が挿入されている。 - 特許庁
  • At the time of current off, magnetic energy remained in a primary coil CT of a regeneration transformer 7 is fed back to a power source by a secondary coil CTS of the regeneration transformer 7.
    電流オフ時に回生トランス7の一次巻線CT中に残った磁気エネルギーは、回生トランス7の二次巻線CTSにより、電源に帰還させる。 - 特許庁
  • To provide a strong and inexpensive optical current direction sensor not affected by the circumferential condition, easily performing the multi-point observation, and not needing a power source at all.
    周囲環境に影響されずに、多点監視が容易で、しかも電源を全く必要とせずに、且つ頑丈で安価な光式流向センサを提供する。 - 特許庁
  • To provide a rare gas fluorescent lamp lighting device capable of lighting at a regulated light volume regardless of fluctuation of direct current power source voltage by applying frequency modulation to the rare gas fluorescent lamp.
    希ガス蛍光ランプを周波数変調することで、直流電源電圧の変動に拘わらず、規定光量での点灯を可能にする。 - 特許庁
  • To provide a lighting control device capable of easily correcting a target value after a layout is changed without having restriction for current conduction of a power source and controlling illuminance of an illuminated surface at desired illuminance.
    電源投入の制約を受けずに、レイアウト変更後の目標値を容易に補正することができ、被照面の照度を所望の照度に制御する。 - 特許庁
  • The blocking device capable of block current supplied to the load from a power source has a blocking circuit, an impedance variable circuit, and an impedance measuring circuit.
    電源から負荷に供給される電流を遮断可能な遮断装置は遮断回路とインピーダンス可変回路とインピーダンス計測回路とを有している。 - 特許庁
  • To reduce current consumption depending on capacitance of a source bus line even in a single-state liquid crystal display panel which is not connected to other panels.
    他のパネルと接続されていない単独の状態の液晶表示パネルでも、ソースバスライン容量に依存する消費電流の低減を可能とする。 - 特許庁
  • Holes are injected from the MOS transistor 2 to a floating gate 10 by a tunnel current, and electrons are injected from the ballistic electron source 3 to the floating gate 10.
    MOSトランジスタ2からフローティングゲート10にトンネル電流にてホールを注入し、弾道電子源3からフローティングゲート10に電子を注入する。 - 特許庁
  • Each of the current source transistors TA includes a semiconductor layer 31 crystallized by irradiating with a laser beam, with respect to a region long in the laser longitudinal axis direction.
    各電流源トランジスタTAは、レーザ長軸方向DAに長尺な領域に対するレーザ光の照射で結晶化された半導体層31を含む。 - 特許庁
  • The controllable power source is formed so as to output a current corresponding to the amplitude-modulated signal of the control input section (31) to an input section (32).
    制御可能な電流源は、制御入力部(31)の振幅変調信号に応じた電流を出力部(32)に出力するように形成されている。 - 特許庁
  • The semiconductor integrated circuit has a VCO cell 10a, a replica cell 11 constituted similarly as the VCO cell 10a, an operation amplifier 12 and a current source bias circuit 3.
    本発明は、VCOセル10aと、VCOセル10aと同様に構成されたレプリカセル11と、オペアンプ12と、電流源バイアス回路3とを有する。 - 特許庁
  • A part of the refrigerant 28 heated by the light emitting face 16a spreads around the light source 16 to generate a convection current which circulates in the refrigerant tank 24.
    冷媒28は、発光面16aに熱せられた部分が光源16の周囲に回り込んで対流を発生させ、冷媒槽24内を循環する。 - 特許庁
  • When the solenoids 62a-62c are short-circuited during Pachinko game, this game machine is so constituted that the current flowing between the drain D and the source S is suppressed by the overcurrent protection circuit 36.
    パチンコ遊技中にソレノイド62a〜62cが短絡すると、ドレインD〜ソースS間を流れる電流は過電流保護回路36によって抑制される。 - 特許庁
  • A transistor 76 functions to supply a base current to the transistor 74 from a power source battery 39 in order to maintain the actuated state of the solenoid 51.
    トランジスタ76は、ソレノイド51の作動状態を維持するために、電源電池39からスイッチングトランジスタ74へベース電流を供給するためのものである。 - 特許庁
  • The apparatus includes a ring of magnetic material, a source for applying a setting magnetic field to the ring, and first and second electrodes for applying an electric current to the ring.
    本装置は磁性材料のリング、リングに設定磁界を印加するソース、およびリングに電流を供給する第1および第2の電極を含む。 - 特許庁
  • The operation signals of the compressor 21 of the helium refrigerator 20 are inputted to a correction magnetic field power source 13 and a current synchronized with the mechanical vibration of the helium refrigerator 20 is generated.
    ヘリウム冷凍機20の圧縮機21の動作信号を補正磁場電源13に入力して、ヘリウム冷凍機20の機械振動と同期した電流を発生する。 - 特許庁
  • In a current mirror circuit 20, a resistor R17 for compensation having positive temperature coefficients is provided between a source for a MOS transistor Q25 and a power line 15.
    カレントミラー回路20において、MOSトランジスタQ25のソースと電源線15との間に正の温度係数を持つ補償用の抵抗R17を設ける。 - 特許庁
  • A TEC 130 changes the temperature of the wavelength-variable light source 110 and that of the EA modulator 120 according to an input temperature control current.
    TEC130は、波長可変光源110およびEA変調器120の温度を、入力される温度制御電流に応じて変化させる。 - 特許庁
  • Also during standby, the internal power source lines can be stably maintained at a predetermined voltage level with less current consumption by the non-stop internal voltage step-down circuits.
    また、スタンバイ時においては、常時内部降圧回路により低消費電流で安定に内部電源線を所定の電圧レベルに維持することができる。 - 特許庁
  • Each internal circuit reduces sub-threshold current by switching a level of a drive power source potential in accordance with corresponding control signals CKE1-CKE5.
    各内部回路は、対応する制御信号CKE1〜CKE5に応じて、駆動電源電位のレベルを切替えることによりサブスレッショルド電流の低減を図る。 - 特許庁
  • The power source part 12 has power generation parts 16, 17, and 18 using an electromagnetic induction current generated by the relatively rotating pulser ring as electric power supplied to the transmission part 15.
    電源部12は、相対回転するパルサーリングによって生成される電磁誘導電流を送信部15への供給電力とする発電部16,17,18を有している。 - 特許庁
  • To provide a power source circuit automatically decreasing supply voltage to a filament when direct current high voltage to be supplied between an anode and a cathode is increased.
    マグネトロンの陽極−陰極間の直流高電圧を上昇させるとフィラメントへの供給電圧が自動的に低下する電源回路を提供する。 - 特許庁
  • A voltage level determination part is connected to a node between the high-voltage input part and the high-voltage current source, and provides the electric signal proportional to the electrostatic potential.
    電圧レベル決定部は、前記高電圧入力部と高電圧電流源の間のノードに接続し、静電位に比例した電気信号を提供する。 - 特許庁
  • An AC voltage is supplied from an AC voltage/current source 30 through an inductance 20 to a semiconductor sample 10 for measuring the electric characteristics.
    交流電圧電流源30からインダクタンス20を介して電気的特性を測定するための半導体試料10に交流電圧を供給する。 - 特許庁
  • To control a beam current of an ion beam extracted from an ion source, having plural filaments to a prescribed value and to one having satisfactory uniformity.
    複数のフィラメントを有するイオン源から引き出すイオンビームのビーム電流を所定の値に、しかも均一性の良いものに制御することができるようにする。 - 特許庁
<前へ 1 2 .... 68 69 70 71 72 73 74 75 76 .... 143 144 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.