「developing」を含む例文一覧(32097)

<前へ 1 2 .... 288 289 290 291 292 293 294 295 296 .... 641 642 次へ>
  • DEVELOPMENT LOADING EVALUATION PATTERN, EVALUATION METHOD USING THE SAME, MASK FOR DEVELOPMENT LOADING EVALUATION, DEVELOPING METHOD, AND ELECTRON BEAM EXPOSURE DEVICE
    現像ローディング評価パターン、それを用いた評価方法、現像ローディング評価用マスク、および現像方法、並びに電子ビーム露光装置 - 特許庁
  • To enable confirmation of minutes and management of follow-up for agenda described in the minutes in a project for developing software and the like.
    ソフトウェアなどを開発するプロジェクトにおいて、議事録の確認および議事録に記載された課題のフォローを管理できるようにする。 - 特許庁
  • The circumferential velocity fluctuates at a timing when the operation signal of a developing unit is turned on/off and at a timing when a transfer operation signal is turned on/off.
    現像器の動作信号がオン、オフとなるタイミング、および転写動作信号がオン、オフとなるタイミングで周速度が変動する。 - 特許庁
  • To provide a developing cartridge capable of achieving miniaturization of an image forming apparatus and also achieving reduction of the number of components.
    画像形成装置の小型化を図ることができるとともに、部品点数の低減を図ることができる現像カートリッジを提供すること。 - 特許庁
  • To provide a technology of preventing false determination on the amount of toner remaining in a toner cartridge based on only the sensing of the amount of toner in a developing device.
    現像器内のトナー量検知のみに基づくトナーカートリッジ内のトナー残量の誤判定を防止する技術を提供する。 - 特許庁
  • To provide a toner for IR ray fixing, the toner developing excellent color saturation and lightness while suppressing generation of voids; and to provide a method for producing the toner.
    ボイドの発生を抑制して、優れた彩度と明度を呈する赤外線定着用のトナー及びその製造方法を提供する。 - 特許庁
  • To minimize image density fluctuation by uniforming the toner density of a developer to be supplied to a developer carrier even when a developing device is reduced in size.
    小型化しても現像剤担持体へ供給する現像剤のトナー濃度を均一にし、画像濃度変動を小さくすること。 - 特許庁
  • To provide an image forming device that prevents aggregation of toner in a developing device without using a complicated configuration or control.
    複雑な構成や制御を用いることなく現像装置内でのトナーの凝集を防止可能な画像形成装置を提供する。 - 特許庁
  • When the toner in the developing chamber is consumed and the toner powder pressure is decreased, the receiving opening area-adjusting member independently opens the receiving opening.
    現像室内のトナーが消費されるとトナー粉圧が下がると受入開口面積調整部材は自立的に受入開口を開く。 - 特許庁
  • To provide an electrostatic latent image developing toner which shows stable cleanability even when an image is continuously outputted in low humidity.
    低湿度下において連続して画像を出力する場合でも安定したクリーニング性を示す静電潜像現像用トナーの提供。 - 特許庁
  • A relief pattern 1' is formed by exposing and developing the resin layer 1 (second resin layer), whereby the objective letterpress printing plate is obtained.
    次いで、樹脂層1(第2の樹脂層)を露光して現像することで凸パターン1’を形成することによって印刷用凸版を得る。 - 特許庁
  • Meanwhile, when scumming is equal to or less than the predetermined value (NO in S3), ejection processing is not carried out, and new toner is supplied to the developing apparatus (S6).
    一方、地汚れが所定値以下の場合(S3のNO)は、吐き出し処理を行わずに、新規トナーを現像装置に供給する(S6)。 - 特許庁
  • To provide an image forming apparatus capable of always recording an excellent image by stably replenishing toner to a developing unit.
    現像器に対して安定的にトナーを補給して、常に、良好な画像を記録することができる画像形成装置を提供すること。 - 特許庁
  • To reduce the time in developing schemas and transformation maps by modeling an EDI payload as XML payload during runtime.
    EDIペイロードを、ランタイム中にXMLペイロードとしてモデル化することにより、スキーマおよび変換マップを開発する時間を低減させる。 - 特許庁
  • To provide a developing device, a process cartridge and an image forming apparatus which can yield excellent image quality by preventing surface staining or toner scattering.
    地汚れやトナー飛散を防止し、良好な画質を得ることが可能な現像装置、プロセスカートリッジ、および画像形成装置を提供する。 - 特許庁
  • To provide a developing device with which a supplied toner can be dispersed uniformly into a developer without putting an excessive stress on the developer.
    現像剤に過度のストレスを与えることなく、補給トナーを現像剤中に均一に分散させることができる現像装置の提供。 - 特許庁
  • To provide a developing device and an image forming apparatus, in which an output value from a permeability sensor is stable and accurate toner concentration control can be performed.
    透磁率センサの出力値が安定し、高精度なトナー濃度制御ができる現像装置、画像形成装置を提供する。 - 特許庁
  • To provide a developing device the developability of which is not lowered, even in high-speed development processing, and which can achieve miniaturization of an image forming apparatus.
    現像が高速化しても現像性を低下させることなく、かつ画像形成装置の小型化が可能な現像装置を提供する。 - 特許庁
  • Thus, the occurrence of developing history (ghost) caused by the difference of the toner consumption is suppressed to provide the high quality image over a long period of time.
    よって、トナー消費の違いによる現像履歴(ゴースト)の発生を抑制し、高品質の画像を長期に渡って提供する。 - 特許庁
  • That is, the coupling gear 83 is disposed on the bend 101A (the highly rigid part of the developing frame 40) of the supporting member 101.
    つまり、支持部材101の屈曲部101A(現像フレーム40において剛性が高い位置)にカップリングギヤ83を配置している。 - 特許庁
  • With the developer cartridge 7 disposed in the contact position, the developing roller 8 of the developer cartridge 7 is in contact with the photosensitive drum 5.
    現像カートリッジ7が接触位置に配置された状態で、現像カートリッジ7の現像ローラ8は、感光ドラム5に接触する。 - 特許庁
  • To prevent unnecessary transition of developer to an image carrier when a rotary home position is detected in an image forming apparatus adopting a rotary developing process.
    ロータリー方式の画像形成装置において、ロータリーホームポジション検知時に、現像剤が不要に像担持体に転移するのを防止する。 - 特許庁
  • To provide a developing device capable of improving the positioning precision of a blade with respect to an outer circumferential surface of a developer carrier.
    現像剤担持体の外周面に対するブレードの位置決め精度の向上を図ることができる現像装置を提供すること。 - 特許庁
  • People in developed countries are overeating while in developing countries many people, especially children, are suffering from hunger or malnutrition.
    先進国の人々が食べ過ぎている一方,発展途上国では多くの人々,特に子どもたちが飢えや栄養失調に苦しんでいる。 - 浜島書店 Catch a Wave
  • A group of researchers from Chubu and Kyoto Universities has succeeded in developing a new prosthetic joint that naturally attaches to the recipient’s bones.
    中部大学と京都大学の研究者グループが,受容者の骨と自然に結合する新しい人工関節の開発に成功した。 - 浜島書店 Catch a Wave
  • But usually, we cannot spend too much time developing a product or it would become outdated.
    でも,たいていは商品開発にあまり多くの時間をかけることはできません。そうでないと,製品が時代遅れになってしまうのです。 - 浜島書店 Catch a Wave
  • To provide an electrostatic latent image developing carrier having excellent durability of a coating and stable charging property without depending on the use environment.
    皮膜の耐久性に優れ、使用雰囲気によらず、安定な帯電性を有する静電潜像現像用キャリアキャリアを提供すること。 - 特許庁
  • To provide a color-developing structure effective for suppressing discoloration and color fading and keeping high visibility and design over a long time.
    変退色を抑止すると共に、高い視認性や意匠性を永年に渡って維持することが出来る発色構造体を提供する。 - 特許庁
  • To provide a method for manufacturing a color filter only by forming, exposing, developing and coloring one layer of a photosensitive resin layer on a substrate.
    基板上に一層の感光性樹脂層を形成して露光現像着色をするだけでカラーフィルターを製造する方法の提供。 - 特許庁
  • The outer diameter D of a rotary rack is ≤1,200 mm, the outer diameter d of a developing roller 60 is ≤20 mm and D/d is ≥50.
    ロータリーラック40の外径Dを1200mm以下、現像ローラ60の外径dを20mm以下、かつD/dを50以上とする。 - 特許庁
  • The intermediate frame 40 is opened until the intermediate frame reaches the front frame 8 during maintenance of the developing unit 6, etc., thereby largely opening the inside of the apparatus.
    現像器6等のメンテナンス時は、前フレーム8に達するまで中間フレーム40を開放し、装置内部を大きく開放する。 - 特許庁
  • A printing surface 52A of the printing tape 51 has thermal color developing property, and printing desired by a user is performed to the printing surface 52A by the thermal head 9.
    印字テープ51の印字面52Aは、感熱発色性を有しており、サーマルヘッド9によりユーザ所望の印字が施される。 - 特許庁
  • A coating and developing processor 3-1 is provided with a data box for storing the information of each unit, etc., and can communicate with the AGC 4.
    塗布現像処理装置3−1には,各ユニット等の情報を蓄積するデータボックスが設けられ,AGC4と通信可能とする。 - 特許庁
  • A plurality of developing cartridges 6 for forming predetermined color developer images respectively are detachably attached to a body casing 2.
    本体ケーシング2には、それぞれ所定色の現像剤像を形成するための複数の現像カートリッジ6が着脱可能に装着される。 - 特許庁
  • To prevent a portion of developer carried on a developing roller which projects from the width of output paper from being give unnecessary stresses.
    現像ローラに担持された現像剤のうち、出力用紙の幅からはみ出す分に対しては余計なストレスを与えないようにする。 - 特許庁
  • SYSTEM AND METHOD FOR DEVELOPING AUTOMATIC MACHINE APPLICATION PROGRAM, PROGRAM FOR EXECUTING THE METHOD AND STORAGE MEDIUM STORED WITH THE PROGRAM
    自動機アプリケーションプログラム開発システム、プログラム開発方法、この方法を実行するプログラム、及びこのプログラムを記憶した記憶媒体 - 特許庁
  • To reduce the number of component items, to reduce a cost, and also to satisfy high accuracy required for a distance between an image carrier and a developing roll.
    部品点数を少なくし、低コストとすると共に、像担持体と現像ロールとの間隔に対する高い要求精度を満足させる。 - 特許庁
  • To provide an electrophotographic toner excellent in transferability and releasability and favorably usable even in a cleanerless developing unit.
    転写性及び脱離性に優れ、クリーナーレス方式の現像装置にも良好に用いられ得る電子写真用トナーを提供すること。 - 特許庁
  • The residue toner on the surface of the photoreceptor after transfer is eliminated and carried to the developing device and the residue charge is destaticized.
    転写後の感光体の表面に残留するトナーは除去されて現像装置に搬送され、残留する電荷は除電される。 - 特許庁
  • This developing processor generates already developed image data by applying development processing to undeveloped image data generated by a digital camera.
    現像処理装置は、デジタルカメラにより生成される未現像画像データに現像処理を施すことにより現像済画像データを生成する。 - 特許庁
  • A guide 24 which guides the development of the airbag 42 to the desired height position is formed at the developing groove 22.
    この展開溝22には、エアバック袋体42の展開を所望する高さ位置に向けて案内する案内部24が形成されている。 - 特許庁
  • In the first developing process, a contour part TL is developed, and only the toner image thereof is transferred to an intermediate transfer belt 8 in advance.
    1回目の現像プロセスでは輪郭線部分TLを現像し、このトナー画像だけを先に中間転写ベルト8に転写しておく。 - 特許庁
  • To provide a signal processing simulation system capable of developing an optical recording medium and its drive in a short time and with low cost.
    光記録媒体及びそのドライブの開発を短時間及び低コストで行うことができる信号処理シミュレーションシステムを提供する。 - 特許庁
  • To provide a developer container and a developing cartridge which are improved in reusability while reducing the number of parts and a cost.
    本発明は部品点数やコストを削減しつつ再利用性を向上させた現像剤容器及び現像カートリッジを提供する。 - 特許庁
  • The branching passage 8 and an intake passage 2 are reconnected in the turbulence developing range of the intake air formed just after the intake throttle valve.
    分岐通路8と吸気通路2とは、吸気絞り弁直後に形成される吸入空気の乱流発達域で再結合する。 - 特許庁
  • A post exposure device is disposed between a developing device and a primary transfer part around the photoreceptor drum at a downstream image forming station.
    下流の画像形成ステーションで、感光ドラムの周囲のうち、現像装置と一次転写部との間に、ポスト露光装置を配置する。 - 特許庁
  • The operation for the reaching condition list is performed without developing the component combination, state explosion is suppressed and it is at a high speed.
    到達条件リストに対する演算は、部品組み合わせを展開せずにおこなえるため、状態爆発を抑えられ高速である。 - 特許庁
  • To restrain the deterioration of electrifying characteristic caused by the moisture absorption of toner in a developing device used for an electrophotographic image forming device.
    電子写真方式の画像形成装置に用いられる現像装置1において、トナーの吸湿による帯電特性の低下を抑える。 - 特許庁
  • To provide a heat-sensitive recording body with excellent color developing properties, water resistance, plasticizer resistance and oil resistance and excellent yellowing resistance of unrecorded parts.
    発色性、耐水性、耐可塑剤性、耐油性に優れ、しかも未記録部の耐黄変性にも優れた感熱記録体を提供することにある。 - 特許庁
  • To provide an image forming apparatus capable of rotating a developing roller at a constant speed while reducing the parts cost and the production cost.
    部品コストや製造コストの上昇を抑制して、現像ローラを等速で回転することができる画像形成装置を提供する。 - 特許庁
<前へ 1 2 .... 288 289 290 291 292 293 294 295 296 .... 641 642 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.
  • 浜島書店 Catch a Wave
    Copyright © 1995-2026 Hamajima Shoten, Publishers. All rights reserved.