「execution」を含む例文一覧(27532)

<前へ 1 2 .... 503 504 505 506 507 508 509 510 511 .... 550 551 次へ>
  • Then, in this case, it executes the modification for removing the amount of variation by the execution of overflow processing from the variation H(S304 or S305), and in case that the modified variation H is at or over an abnormality determining value β(S306: YES), it determines that there is abnormality in the position sensor (S308).
    そしてこの場合には、変化量Hからオーバーフロー処理の実行による変化分を除去する修正処理を実行し(S304,またはS305)、その修正された変化量Hが異常判定値β以上である場合には(S306:YES)、位置センサに異常ありと判定する(S308)。 - 特許庁
  • A server device 3 determines a data amount corresponding to a type of data which is executed in response to a request from a client 2, on the basis of used memory amount information 3b showing a data amount which is calculated from an execution history of data for each type of data which the client 2 acquires, and allocates the determined data amount to memory 3a.
    サーバ装置3は、クライアント2が取得するデータの種類ごとにデータの実行履歴から算出したデータ量を表す使用メモリ量情報3bから、クライアント2からの要求に応じて実行するデータの種類に対応するデータ量を特定し、特定したデータ量をメモリ3aに割り当てるようにした。 - 特許庁
  • This computer system 1 monitors whether the internal temperature of the system exceeds four set temperature t1 to t4 or not and continues the execution of various applications within an on operation guaranteed temperature range by stepwise changing/limiting the clock frequency bands f1 to f3 of the CPU 2 or the power supply of function blocks B1 to B3.
    コンピュータ装置1は、システム内部の温度が、t1〜t4の4つの設定温度を越えたか否かを監視し、CPU2のクロック周波数f1〜f3や機能ブロックB1〜B3の電源を段階的に変更・制限することによって、動作保証温度内での各種アプリケーションの実行の継続を図る装置である。 - 特許庁
  • In order to prevent a command processing error by mistaking the same command as the transition command included in the CMYK binary data as the transition command, the command controller 4 checks whether or not an engine controller 5 is processing binary data in the case the transition command is detected, and judges that it is a mistake in the case of execution of the process.
    CMYKの2値化データに移行コマンドと同じコードが含まれていても、それを移行コマンドと誤認して誤ったコマンド処理をすることがないよう、コマンドコントローラ4は、移行コマンドを検出したとき、エンジンコントローラ5がCMYKの2値化データを処理中か否かを調べ、処理中であれば誤認と判断する。 - 特許庁
  • During execution of filter regeneration control, PM remaining quantity at every regular time pass is estimated by subtracting product of multiplication of the regular time, PM removing rate per unit time and PM remaining quantity at count start time of the regular time from PM remaining quantity at count start time of the regular time at each count of regular time.
    フィルタ再生制御実行中において、規定時間がカウントされる毎に、該規定時間と単位時間当たりのPM除去率と該規定時間のカウント開始時点でのPM残量との積を該規定時間のカウント開始時点でのPM残量から減算することで、規定時間が経過する毎のPM残量を推定する。 - 特許庁
  • When the temperature abnormality of a backlight 17 in a video display part is detected by a control circuit 4, and the temperature abnormality is detected during execution of a video recording process, the power distribution to the backlight 17 is stopped or restrained while continuing the video recording process by a recording/reproducing circuit 8, and the occurrence of the temperature abnormality is reported.
    制御回路4により,映像表示部におけるバックライト17の温度異常を検出し,録画処理の実行途中に温度異常が検出された場合に,録画・再生回路8による録画処理を継続させつつ,バックライト17に対する通電を停止又は抑制し,温度異常が発生した旨の通知を行う。 - 特許庁
  • The network communication apparatus (a2) capable of executing authentication information setting processing for receiving the authentication of a network (A) from the other network communication apparatus (12) or informing the other network communication apparatus (12) in the network (A) about the authentication information includes notice means (L2, L3) for informing a user about the execution of the authentication information setting processing.
    ネットワーク(A)内の他のネットワーク通信装置(12)との間で当該ネットワーク(A)の認証情報を受け取る又は通知するための認証情報設定処理が行えるネットワーク通信装置(a2)であって、前記認証情報設定処理が行われていることをユーザに報知する報知手段(L2,L3)を備えている。 - 特許庁
  • A power source scanner switches a feeding line DS of previous line, from high potential to low potential before the mobility correcting operation, and after the threshold potential correcting operation, introduces a capacity coupling voltage into one current terminal of the transistor T2 for driving via auxiliary capacitance Csub and to make it conduct normal execution of the mobility correcting operation.
    電源スキャナは、閾電圧補正動作の後で移動度補正動作の前に、前行の給電線DSを高電位から低電位に切り換え、補助容量Csubを介して容量カップリング電圧を駆動用トランジスタT2の一方の電流端に入れ、以って移動度補正動作を正常に行わせる。 - 特許庁
  • To install only a precast material at a site, to reduce a working process at the site and improve efficiency on the execution of works, and to enhance workability without requiring forms, which must be assembled and removed, separately remarkably becuase the whole is installed together with a frame even when the precast material is used.
    現場ではプレキャスト材を据え付けるだけでよく、現場での作業工程を軽減できて施工能率を向上でき、さらに、プレキャスト材を使用する場合であっても、枠ごと全体を据え付けるから、組立および脱型の必要のある型枠を別途格別に必要とせず施工性を向上できる。 - 特許庁
  • In executing prescribed measures to a certain method or system for the purpose of its improvement, evaluation items whose effects are more significant according to the execution of the measures are specified first, and the current situations are analyzed and evaluated under a preliminarily set condition category, and visually displayed or quantitatively grasped according to evaluation coefficients.
    ある制度やシステムに対し、その改善を目的として所定の施策を実施する場合に、先ず施策の実施により効果が顕著に表れる評価項目を特定し、予め設定した条件区分のもとで、現状を分析評価し、これをビジュアル的に表示したり、評価係数により定量的に把握する。 - 特許庁
  • When the CPU is given an instruction for the preset execution from the controlling element 16, the CPU determines the zoom position for reproducing the focal length in storing the preset position in the present extender position based on the zoom position and extender position in storing the preset position stored into the memory 20 and moves the zoom lens ZL to this position.
    一方、操作部16からプリセット実行の指示が与えられると、そのときのエクステンダ位置と、メモリ20に記憶したプリセット位置記憶時のズーム位置及びエクステンダ位置とに基づいて、現在のエクステンダ位置においてプリセット位置記憶時の焦点距離を再現するズーム位置を求め、ズームレンズZLをその位置に移動させる。 - 特許庁
  • The first node 100_2 comprises a first initialization processing part 22 for executing the predetermined initialization processing, and an execution status communication part 23 for sending the internal status (status information 40) of a memory changed by the predetermined initialization processing by the first initialization processing part 22 to the second node 100_1.
    第1のノード100_2は、所定の初期化処理を実行する第1の初期化処理部22と、第1の初期化処理部22における所定の初期化処理によって変更されたメモリ内の状態(状態情報40)を第2のノード100_1に送信する実行状態通信部23とを備える。 - 特許庁
  • The simulator 1 checks whether pieces Di1 to Din of debug code information are registered in debug code link information 4 corresponding to object code addresses Ao1 to Aon of current execution and simulates them by executing the instructions of the object codes as they are when not registered.
    シミュレータは、シミュレートプログラムであるオブジェクトコードを実行する際、デバッグコードリンク情報に基づいて、実行するオブジェクトコードアドレス毎に、当該オブジェクトコードアドレスに対応してデバッグコード情報が設定されているかチェックし、リンクされていると、当該オブジェクトコードアドレスのオブジェクトコードの実行と同期して、リンクされているデバッグコードを実行する。 - 特許庁
  • When determining whether an EGR system is normal or not, EGR system inspection is executed (S190, S240) accompanied by execution of control for inspection controlling an engine so that the engine is operated in a prescribed load operation state outputting power Pech from the engine (S140, S180, S230).
    EGRシステムが正常であるか否かを判定するEGRシステム検査を実行する際には、エンジンからパワーPechが出力される所定の負荷運転状態でエンジンが運転されるようエンジンを制御する検査用制御の実行を伴って(S140,S180,S230)EGRシステム検査を実行する(S190,S240)。 - 特許庁
  • The electronic control unit ECU changes the operation point of the engine ENG to reduce engine output at rattle noise suppression control execution to make a normal operating line of the engine ENG close to an optimum fuel consumption line, so that deterioration of fuel consumption accompanying the rattle noise suppression control is suppressed.
    そして電子制御ユニットECUは、このときの歯打ち音抑制制御の実施に際して、エンジン出力が低下されるようにエンジンENGの運転点を変更することで、エンジンENGの通常動作ラインを最適燃費ラインに近づけて、歯打ち音抑制制御の実施に伴う燃費の悪化を抑えるようにしている。 - 特許庁
  • To provide an information processing device which can estimate a battery life and power consumption for processing that change depending on the usage by a user based on an actual performance value and ensures execution of processing specified by the user in a specified period of time in a mobile terminal unable to obtain power consumption information from an external source.
    消費電力情報を外部から取得できない携帯端末において、利用者毎の使われ方によって変わる処理の消費電力やバッテリー寿命などを実績値から推測することができ、利用者が指定した処理を指定された時間分実行する事を保証する情報処理装置を提供する。 - 特許庁
  • To provide a game machine which can prevent drop in interests among players with higher awareness of the winning of the starter prize and the execution of a prescribed processing reserved by an announcement by enabling the reservation of the prescribed processing to be executed based on the winning of the starter prize while making a flexive play possible for the prescribed processing.
    始動入賞に基づいて実行される所定の処理を留保可能とし、発報により始動入賞や留保された所定の処理の実行を意識させ、所定の処理に対応した遊技を反射的に行えるようにして、興趣が低下するのを防止することのできる遊技機を提供する。 - 特許庁
  • In an initial symbol variation game after a probability variation big win ends, when satisfying an execution condition, this game machine performs decision stop-display of a big win symbol as the decoration symbol same as a symbol variation game becoming an opportunity that the preceding big win game is performed with a one-game continuous presentation.
    確変大当りの終了後の初回の図柄変動ゲームでは、実行条件を満たす場合であれば、当該初回の図柄変動ゲームを、1ゲーム連演出を伴わせて直前の大当り遊技が行われる契機になった図柄変動ゲームと同一の飾り図柄による大当り図柄を確定停止表示させるようにした。 - 特許庁
  • The chart edition means comprises: an operation area determination means for determining which of the areas in the chart screen 7 is operated; and an edition content execution means for selecting a corresponding item from previously registered edition contents and executing it according to an area determined with the operation area determination means.
    カルテ編集手段は、カルテ画面7のいずれの領域が操作されたのかを判別する操作領域判別手段と、操作領域判別手段によって判別された領域に応じて、予め登録した編集内容から該当するものを選択し、実行する編集内容実行手段とを備えた構成とする。 - 特許庁
  • Therefore, such processes for power failure are not effected during the execution of each process (S19) for control over the game of a pachinko machine, that is, such processes can be effected at desirable times which will not hinder other control, so that a control program can be simplified and its volume reduced.
    よって、パチンコ機の遊技の制御を行う各処理(S19)の実行途中で、かかる停電時処理を実行することがないので、即ち、停電時処理を他の制御に支障を来すことのない好適なタイミングで実行することができるので、制御プログラムの簡略化と小容量化とを実現することができる。 - 特許庁
  • When a held write command is in an execution waiting state, processing is performed for receiving a new write command, checking a hit status expressing a position relation with the LBA of the held command, relocating the order of write onto a recording medium and recording write data onto the medium according to the relocated write order.
    既保持の書き込みコマンドが実行待ち状態にあるとき、新たな書き込みコマンドを受け取り、既保持コマンドのLBAとの位置関係を表すヒットステータスをチェックし、記録媒体への書き込み順序を再配列し、再配列された書き込み順序に従って媒体に書き込みデータを記録する処理を行う。 - 特許庁
  • The inspection support system includes an inspection result writing section 53 for writing the inspection results obtained during execution of a control program into an output buffer 56, a camera image output section 57 to read and output a camera image in an output buffer 56, and a measurement result output section 58 to read and output measurement results in the output buffer 56.
    制御プログラムの実行時に得られる検査結果を出力バッファ56に書き込む検査結果書込み部53と、出力バッファ56内のカメラ画像を読み出して出力するカメラ画像出力部57と、出力バッファ56内の計測結果を読み出して出力する計測結果出力部58により構成される。 - 特許庁
  • This accomplishes a bet operation of credit per slot game in each of the slot game areas A1-A10 in the simultaneous execution of the slot games in the plurality of slot game areas A1-A10 (maximum of 10) per play while enabling the setting of the number of credit bets per slot game in each of the slot game areas A1-A10.
    したがって、一回のプレイで複数のスロットゲームエリアA1〜A10(最大10個)においてスロットゲームを同時に実行する際に、各スロットゲームエリアA1〜A10のスロットゲーム毎にクレジットのベット操作を行うことができ、かつ、各スロットゲームエリアA1〜A10のスロットゲーム毎にクレジットのベット数を設定することができる。 - 特許庁
  • This game machine further includes special performance selection means (a performance control device 40) selecting a first special performance when game ball detection means (the performance control device 40) detects a game ball in a predetermined period of the variable display game under execution, and selecting a second special performance when detecting no game ball.
    また、実行中の変動表示ゲームの所定期間に遊技球検出手段(演出制御装置40)で、遊技球を検出した場合に第一特殊演出を選択し、遊技球を検出しない場合に第二特殊演出を選択する特殊演出選択手段(演出制御装置40)を備える。 - 特許庁
  • When the client terminal 3 connected through the Internet 4 makes a request to distribute the application, a server 2 sets real-time clock information on the side of the server 2 when the request to distribute the application is received as an update time parameter of a JAM file and sends it prior to the transmission of a JAR file as an execution file.
    サーバ2はインターネット4を介して接続されたクライアント端末3からアプリケーションの配信が要求されると、アプリケーションの配信要求を受けたときのサーバ2側のリアルタイムクロック情報をJAMファイルの更新日時パラメータに設定し、実行ファイルであるJARファイルの送信に先立って送信する。 - 特許庁
  • In the semiconductor device 1, at the time of a test mode, a signal for controlling operation is inputted to only one part of input pads 12 out of a plurality of pads, the pad for inputting this signal and input pads 13-15 other than an input pad 11 for inputting signal for starting execution of the test mode are not used.
    半導体装置1では、試験モード時においては、複数のうちの一部の入力パッド12にのみ動作の制御用の信号が入力され、この信号の入力用と、試験モードの実行を開始させるための信号入力用の入力パッド11以外の入力パッド13〜15は使用されない。 - 特許庁
  • In displaying the stroke of a character input by a handwritten character input system on a display during input execution as a path on which a straight line and a secondary Bezier curve are continued, such featured points as the start point, endpoint, and brake point of the stroke and a point for determining the way of plotting a curve are displayed as marks with graphics.
    手書き文字入力システムにより入力された文字のストロークを、直線と2次ベジェ曲線とを連ねたパスとして入力実施中にディスプレイに表示する際に、該ストロークの始点・終点・折れ点・曲線の描き方を決める点などの特徴点を図形による印として表示する。 - 特許庁
  • An emergency information application for informing the destination of emergency communication by controlling plural portable telephone sets 22A-22C is installed in a note PC, and when the enter key of the note PC is pressed during the execution of the application, a control signal for emergency communication is transmitted from the note PC to each portable telephone set 22.
    ノートPC23には、複数の携帯電話機22A〜22Cを制御して緊急連絡先に通報を行うための緊急通報アプリがインストールされており、アプリ実行中にノートPC23のエンターキーが押されると、ノートPC23から各携帯電話機22に緊急通報用の制御信号が送られる。 - 特許庁
  • The first device transmits an instruction to request issue of a control instruction to the second device, to the third device through the second device, and the third device generates the control instruction to the second device and transmits the control instruction to an instruction execution means of the second device, and the second device executes the instruction by the means.
    第一の機器は、第二の機器に対する制御命令の発行を求める命令を、第二の機器を介して第三の機器に送信し、第三の機器は、第二の機器に対する制御命令を生成し、第二の機器の命令実行手段に送信し、第二の機器が、前記手段で前記命令を実行する。 - 特許庁
  • In the retrieval of the archived data, the plurality of retrieval expressions can be received, the retrieval expressions are made to have group attributes, the retrieval processing in group units is performed, the interruption and the resumption of the retrieval can be managed in the group units as the need arises, and the execution situation of the retrieval processing can be monitored in the group units.
    アーカイブデータの検索において、複数の検索式を受付可能とし、これらの検索式にグループ属性を持たせ、グループ単位での検索処理を行い、必要に応じて、検索の中止・再開をグループ単位で管理できるようにするとともに、検索処理の遂行状況をグループ単位でモニタリングできるようにする。 - 特許庁
  • To permit interest to be further improved by relating the execution of an advance announcement performance before the start of a variable display resulting in jackpot patterns to the causing of a probability variation jackpot in which the winning rate of a game ball in a variable winning means varies according to the kind of probability variation patterns.
    表示結果が大当り図柄となる可変表示が開始される前に予告演出を実行することと、確変図柄の種類によって可変入賞手段への遊技球の入賞率が異なる確変大当りを発生させることとの間に関連性を持たせることにより、より一層の興趣の向上を図ることができる。 - 特許庁
  • This controller includes a R/W head 13 for reading/writing data from/to a recording medium, a VCM 12 for moving the R/W head 13 during a seek operation, and a seek command execution part 9 for outputting a VCM voltage S11 when a seek start permission signal S14 is input from a seek timing issuance part 22.
    本発明は、記録媒体に対してリード/ライトを行うR/Wヘッド13と、シーク動作時にR/Wヘッド13を移動させるVCM12と、シークタイミング発行部22からシーク開始許可信号S14が入力されたとき、VCM電圧S11を出力するシークコマンド実行部9とを備えている。 - 特許庁
  • In a case where an index sensor detects an index during the execution of the control of the performance rotation control means, when the counting number of the pulse counter reaches the upper limit before detecting the index again, the slot machine stops the control of the performance rotation control means and starts the control of the acceleration rotation control means.
    演出回転制御手段の制御の実行中にインデックスセンサーがインデックスを検出した場合において、再度インデックスを検出する前にパルスカウンタのカウント数が上限に達したときには、演出回転制御手段の制御を中止するとともに加速回転制御手段の制御を開始する。 - 特許庁
  • To provide vegetable fiber to be added to a pavement body with a high sagging preventing effect and superior compaction property in execution of works, to provide a method for easily manufacturing a uniform sagging preventing asphalt pavement composition, and to provide an improved crushed stone mastic pavement construction method or water draining pavement construction method using the fiber.
    ダレ防止効果が高く、かつ施工時の締固め性に優れた舗装体添加用植物繊維の提供、および均一なダレ防止アスファルト舗装組成物を容易に製造する方法の提供、ならびに該繊維を用いた改良された砕石マスチック舗装工法もしくは排水性舗装工法を提供する。 - 特許庁
  • A control part 3 comparatively checks contents stored in the receiving part 2 and contents stored in the storage part 1 and when the power source on/off switching request of this time is a request from the other task except for the task under execution at present, processing is performed so as not to execute the power source on/off switching request to the hardware device 4.
    制御部3は、受付部2で記憶している内容と、記憶部1で記憶している内容とを比較検討し、今回の電源オン/オフ切替要求が現在実行中のタスク以外の他のタスクからの要求である場合、電源オン/オフ切替要求がハードウエアデバイス4に対して実行されないように処理する。 - 特許庁
  • To economically and efficiently fill and place a solidification material such as concrete, mortar, and cement in a prescribed construction place, without using large-scale equipment such as a concrete mixer, without being restricted by a site condition of a work site, and without being forced into irregular work, for example, in clearance filling work execution.
    たとえば隙間詰め施工において、コンクリートミキサー等の大掛かりな設備を使わず、また、工事現場の立地条件等に制約されず、さらに、変則的な工事を強いられることなく、コンクリート、モルタル、セメント等の固化材を所定の施工個所に経済的かつ効率的に充填・打設することができる。 - 特許庁
  • A communication history extraction part 107c extracts the communication history including the communication process in which the creation time or update time of the execution file is decided to be included in the prescribed period and the port number decided not to be matched with the port number stored in the already known information storage part 100 from among the communication histories.
    通信履歴抽出部107cは、通信履歴の中から、実行ファイルの生成時刻または更新時刻が所定期間に含まれると判定された通信プロセスを含み、かつ既知情報記憶部100が記憶するポート番号と一致しないと判定されたポート番号を含む通信履歴を抽出する。 - 特許庁
  • A data code whose access frequency is high detected based on data access information in which the number of times of access of a data code performed by the execution of a temporarily target code on a machine or a simulator is recorded for each address and access size, and rearranged in a data code area whose access can be performed by one instruction by a data rearranging part 115.
    データ再配置部115により、マシン上もしくはシミュレータ上の一時目的コードの実行によるデータコードのアクセス回数をアドレスおよびアクセスサイズごとに記録したデータアクセス情報に基づき、アクセス頻度の高いデータコードを検出し、1命令でアクセス可能なデータコード領域に再配置する。 - 特許庁
  • In this road surface execution method, a roadbed material such as crushed stones 2 is spread on the subgrade soil 1 at the thickness of about 15 cm, a base asphalt mixture 3 is provided on it at the thickness of about 4 cm, and a surface asphalt mixture 4 is provided on it at the thickness of about 4-5 cm to form asphalt pavement.
    本発明の路面施工方法は、路床土1上に、厚さが15[cm]程度になるように、砕石2などの路盤材料を敷き、その上に基層アスファルト混合物3を4[cm]程度設け、その上に厚さが4〜5[cm]程度になるように、表層アスファルト混合物4でアスファルト舗装を作成する。 - 特許庁
  • In a test support portion 240, a test cell highlight portion 242 highlights a combination information cell associated with the next test case to be executed, during execution of the status transition test, and a test result history, an error replication procedure, and progress circumstances or the like are displayed on a display portion.
    テスト支援部240では、状態遷移テストの実行中、次にテストが実行されるべきテストケースに対応付けられている組み合わせ情報用セルがテストセル強調表示部242によって強調表示され、テスト結果の履歴、エラーの再現手順、進捗状況などの表示部への表示が行われる。 - 特許庁
  • To provide a highly-functional multiple screen video monitor by which a balance between a display of images and accuracy of motion detection can be properly kept, while suppressing processing load by controlling interval of execution and parameters of image display and motion detection operations of transmitters, according to the degree of attention for the images of the transmitters.
    各送信装置の映像の注目度に応じて、各送信装置の映像の表示と動き検出処理の実行間隔及びパラメータを制御することで、処理負荷を抑えつつも映像の表示と動き検出の精度のバランスを適切に保つことができる高機能な多画面映像監視装置を提供する。 - 特許庁
  • When a prescribed condition is satisfied, a game to operate a game member 93, which is the figure of a baseball player, is executed in a baseball game part 90, and the presentation image related to the game member 93 is displayed in a liquid crystal display device 32 as operatively connected with the execution of the game.
    所定の条件が満たされたときに、野球遊技部90においてフィギュアの野球選手である遊技部材93を動作させる遊技を実施するとともに、この遊技を実施するのと連動して、液晶表示装置32において遊技部材93と関連する演出画像を表示させるようにした。 - 特許庁
  • This system comprises a picture plane recording means for recording a test work picture plane from the start of the test for a designated test item to its end as an animation in a first storage means; and an execution monitoring means for recording file information and test item information used by the software to be tested in a second storage means.
    指定されたテスト項目についてのテスト開始から終了までのテスト作業画面を動画として第1の記憶手段に記録する画面記録手段と、テスト対象ソフトウェアが使用したファイル情報およびテスト項目情報を第2の記憶手段に記録する実行監視手段とを備える。 - 特許庁
  • To provide a bar arrangement structure of a concrete beam and a method for its execution superior in reducing an amount of reinforcement bars used and simplifying the bar arrangement while enabling shortening a period for delivery, quality stabilization and reduction in cost by unifying the lengths without causing problems of a structure regulation concerning a position of reinforcing bar joint, strength and reliability.
    使用鉄筋量の節減、配筋の簡素化の面で優れ、さらに鉄筋継手位置に係る構造規定、強度、信頼性の問題を生じることなく、定尺化による納期短縮、品質安定化、コスト削減を可能としたコンクリート造梁の配筋構造およびその施工方法を提供する。 - 特許庁
  • This instruction execution method includes a step (a) for extracting a bytecode for a method constituting a Java class, a step (b) for converting the extracted bytecode into a second code including information about the position of an operation code handler performing an operation corresponding to an opcode in the bytecode and using a 16-bit memory element, and a step (c) for executing the second code.
    (a)ジャバクラスを構成するメソードのバイトコードを抽出するステップと、(b)抽出されたバイトコードを、バイトコード内の演算コードに対応する動作を行う演算コードハンドラの位置に関する情報を含み、かつ16ビットのメモリ要素を使用する第2コードに変換するステップと、(c)第2コードを行うステップとを含む。 - 特許庁
  • In a CPU4 provided in a semiconductor integrated circuit device, a use signal generating circuit (selection control signal generating part) 19 decodes the operation code of a command which is fetched by an instruction register 20 through a data bus, generates a use signal (selection control signal), and outputs it to an execution part 9 and an arithmetic control part 21.
    半導体集積回路装置に設けられたCPU4において、use信号生成回路(選択制御信号生成部)19は、データバスを介してインストラクションレジスタ20が取り込んだ命令のオペコードをデコードしてuse信号(選択制御信号)を生成し、実行部9と演算制御部21とにそれぞれ出力する。 - 特許庁
  • A control determining means 1f determine execution of the gain constant controlling or the output constant controlling at the optical amplifying means 1e, based on a total value of optical power of the plurality of signal light inputted into the optical multiplexing means 1d and optical power of wavelength multiplexed signal light inputted into the optical amplifying means 1e.
    制御判定手段1fは、光合波手段1dに入力される複数の信号光の光パワーの合計値と、光増幅手段1eに入力される波長多重された信号光の光パワーとに基づいて、光増幅手段1eの利得一定制御および出力一定制御の実行を判定する。 - 特許庁
  • The surface of a glass surface 12 of the halftone reticl 10 is provided with rugged parts 11, by which the uniform diffusion of illumination light 15, etc., into a glass surface 12 is made possible and therefore diagonal incident light 20 effective for improving the contrast on the wafer 112 may be inexpensively and easily increased without the execution of intricate processes.
    ハーフトーンレティクル10のガラス面12の表面に凹凸部11を設けることにより、照明光15等をガラス面12に均一に拡散することができるため、複雑なプロセスをせずに安価で容易にウェーハ112上のコントラスト向上に有効な斜め入射光20を増加させることができる。 - 特許庁
  • This image processor has: a similarity calculation means calculating similarity between a document image and registration data; a print control means performing control so that the registration data decided that the registration data have the high similarity with the document image as the result of the calculation by the similarity calculation means are printed; and a display means displaying a processing kind during execution.
    文書画像と登録データの類似度を算出する類似度算出手段と、前記類似度算出手段による算出の結果、前記文書画像と類似度が高いと判定された登録データを印刷するよう制御する印刷制御手段と、実行中の処理種別を表示する表示手段を有する。 - 特許庁
  • The electronic controller 100 prohibits the shifting position switching operation to the selected shifting position and a shifting position having a change gear ratio higher than that of the shifting position, when estimating the state where the internal combustion engine 10 is driven by the driving force in the driving wheel side in accompaniment to the execution of the jumping shift change.
    電子制御装置100は、飛び越し変速の実行に伴い駆動輪側の駆動力によって内燃機関10が駆動される状態になることが推定されたときに選択された変速段及び同変速段よりも変速比の大きい変速段への変速段切替操作を禁止する。 - 特許庁
<前へ 1 2 .... 503 504 505 506 507 508 509 510 511 .... 550 551 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.