「generated code」を含む例文一覧(1622)

<前へ 1 2 .... 21 22 23 24 25 26 27 28 29 .... 32 33 次へ>
  • A code amount comparing section 111 selects and outputs encoded data of which the encoded data amount is minimum, from among N2 pieces of encoded data generated from the coefficient value of one pixel block repeatedly N1 times.
    符号量比較部111は、1つの画素ブロックの係数値から生成されたN2個の符号化データ中の最小符号化データ量となる符号化データを選択し、出力することをN1回行なう。 - 特許庁
  • A pixel value variation processing part 200 corrects the value of a pixel of interest of an input image 300 so that a code generated by an encoding processing part 220 becomes small and outputs the corrected pixel value.
    画素値変更処理部200は、入力画像300の着目画素値を、符号化処理部220が生成する符号が小さくなるように修正し、変更画素値310を出力する。 - 特許庁
  • When a second maximum bit rate is designated during compression coding at a first maximum bit rate, a coding means is controlled so as to change the generated code amount gradually for a prescribed time (t_1-t_0).
    第1の最大ビットレートによる圧縮符号化中に第2の最大ビットレートが指定されると、所定の時間(t_1−t_0)をかけて発生符号量が変化するように、符号化手段が制御される。 - 特許庁
  • To attain to reduce the amount of generated code without degrading subjective image quality and to speed up coding processing, in moving image coding in which a visual distortion model in consideration of contrast sensitivity is used for mode selection.
    コントラスト感度特性を考慮した視覚歪みモデルをモード選択に適用する動画像符号化において,主観画質を劣化させずに発生符号量を削減し,また,符号化処理の高速化を図る。 - 特許庁
  • To prevent an increase of a generated code amount, and reduction of precision for a predicted image in a case that prediction between screens or in a screen for pixel blocks, is performed based on specifications such as H.264.
    H.264などの規格により、画素ブロックで画面間または画面内予測をおこなう場合に、発生する符号量を増大させることなく、しかも、予測画像の精度を低下させないようにする。 - 特許庁
  • Under this condition, the HID host generates transmission data D3 based on plural pieces of status information(information including ON/OFF states of the Caps Lock key, the Num Lock key and the Scroll Lock key) and transmits the generated transmission data D3 to the code scanner.
    これを前提にして、HIDホストは、複数のステータス情報(Caps Lock、Num Lock及びScroll LockのON/OFF状態を含む情報)に基づいて送信データD3を生成し、該生成した送信データD3をコードスキャナに送信する。 - 特許庁
  • Another popular optimization flag is -pipe (use pipes rather than temporary files for communication between the various stages of compilation).It has no impact on the generated code.
    他の人気がある最適化フラグとして-pipe(コンパイル時の様々な段階間の情報のやり取りに、テンポラリファイルではなくパイプを使うようにします)があります。 これは生成されるコードには影響しません。 - Gentoo Linux
  • The diagram constructed in the Design view is automatically generated into BPEL source code compliant with the WS-BPEL 2.0 specification with the exceptions listed in the BPEL 2.0 Language Constructs section of the BPEL Service Engine User's Guide.
    デザインビューで作成した図から、WS-BPEL 2.0 仕様に準拠する BPEL ソースコードが自動的に生成されます。 その例外については、『BPEL サービスエンジンユーザーガイド』の「BPEL 2.0 言語構文」の節に一覧表示されています。 - NetBeans
  • To prevent mist of oily matter generated under a high temperature and dust from depositing on a light receiving and emitting element or a rotary code plate, when an encoder is rotated at a high speed, so as to provide a precise encoder unit.
    エンコーダの高速回転時、高温下で発生するミスト化した油性物質および粉塵が受発光素子や回転符号板に付着するのを防止し、高精度のエンコーダ装置を提供する。 - 特許庁
  • At the time of executing the program P, a program P including a processing code for operating processing for outputting information necessary for the optimization to an information file F1 and an information file F2 is generated.
    このとき、プログラムPを実行したときに、最適化に必要な情報を情報ファイルF1、及び情報ファイルF2に出力する処理を行う処理コードを含むプログラムPを生成する。 - 特許庁
  • Then, an iris area is segmented from the original image based on the detected positions of the iris outer edge and the pupil outer edge (a step S2), and featured values are extracted, and an iris code is generated (a step S3).
    そして、検出された虹彩外縁および瞳孔外縁の位置を基にして、原画像から虹彩領域を切り出し(ステップS2)、特徴量を抽出して虹彩コードを生成する(ステップS3)。 - 特許庁
  • When an abnormality is generated in prize ball supply (the number of prize ball supply is extremely larger than a prescribed number, or the like), an error information code is outputted (SE1) to a prize ball control board from a game control board.
    賞球の払出しに異常(払出す賞球の数が予定よりも大過ぎる等)がある場合には遊技制御基板から賞球制御基板にエラー報知コマンドが出力される(SE1)。 - 特許庁
  • Further, the stored code data converted according to the output control system are outputted to the printer 113, bit image data are generated by the printer 113 and outputted to a sheet of paper b a printer engine 112.
    そして、その格納した出力制御体系に応じて変換したコードデータをプリンタ113側へ出力し、プリンタ113でビットイメージデータが生成され、プリンタ・エンジン112によって紙に出力される。 - 特許庁
  • Next, when the generated color arrangement information satisfies an establishment condition prescribing the establishment of the 1D color bit code, the color arrangement information is regarded as the arrangement of the colors of the 1D color bit code of the reading target, decoding is performed based on the color arrangement information, and data are outputted.
    次に、生成した色彩配列情報が1Dカラービットコードの成立を規定する成立条件を満たしている場合に、その色彩配列情報は読み取り対象の1Dカラービットコードの色彩の配列であるとみなして、その色彩配列情報に基づいてデコードを行い、データを出力する。 - 特許庁
  • Furthermore, when the conversion coefficient is similarly quantized and encoded as a second layer at a quantization step smaller than the above quantization step, the quantization coefficient after quantization is reflectively encoded as reducing a quantization error in each layer until generated code quantity becomes specified code quantity by using an inverse quantization part 16 and a quantization part 19.
    更に前記より小さい量子化ステップで同様に量子化し第二レイヤとして符号化するに当り、量子化後の変換係数を逆量子化部16、量子化部19を用いて、発生符号量が所定の符号量になるまで再帰的に各レイヤで量子化誤差を低減しながら符号化する。 - 特許庁
  • The faulty position indication device is provided with an error log for collecting and storing the fault information of the device, a means for analyzing the error log dividing the cause of the fault of the device and outputting the divided result as a flag code, a means for analyzing the flag code and generating suspected component information, and a means for indicating the generated suspected component information.
    装置の故障情報を収集して蓄積したエラーログと、エラーログを分析して装置の故障原因を切り分けてその結果をフラグコードとして出力する手段と、フラグコードを分析して被疑部品情報を生成する手段と、生成した被疑部品情報を提示する手段とを備える。 - 特許庁
  • Moreover, the encryption/decoding device is configured such that the key is generated on the basis of a code resulting from combining one set of living body information and one character string or a code resulting from optionally combining a plurality of sets of living body information and a plurality of character strings, so as to generate codes of numerous kinds thereby realizing encryption/decoding processing of data with high security.
    さらに、1つの生体情報と1つの文字列とを組み合わせたコード、あるいは複数の生体情報と複数の文字列とを任意に組み合わせたコードに基づいて鍵を生成する構成とすることで無数の種類のコードを生成可能としてセキュリティの高いデータの暗号化・復号化処理を実現した。 - 特許庁
  • Besides, a voice Sp is reproduced from the respective inversely quantized values, the respective codes converted to the codes of the second voice encoding system are inversely quantized, a target signal is generated by using the respective inversely quantized values and the reproduced voice, and the target signal is inputted to an algebraic code converting part 107 to find an algebraic code Cb2 of the second encoding system.
    また、各逆量子化値から音声Spを再生すると共に第2音声符号化方式の符号に変換された各符号を逆量子化し、各逆量子化値と再生音声とを用いてターゲット信号を生成し、該ターゲット信号を代数符号変換部107に入力して第2符号化方式の代数符号Cb2を求める。 - 特許庁
  • When processing is completed about all pieces of history data and all the keywords (S32: YES, S34: YES), three keywords are extracted from the keywords in descending order of the counted number (S37), an identification code corresponding to the extracted keywords and user information is generated (S38), and a coupon ticket added with the identification code is printed (S39).
    すべての履歴データとすべてのキーワードについて処理が完了すると(S32:YES、S34:YES)、カウントされたキーワードの個数が多いものから3つが抽出され(S37)、ユーザ情報と抽出されたキーワードに対応する識別コードが生成されて(S38)、識別コードが付加されたクーポン券が印刷される(S39)。 - 特許庁
  • A second rolling code is generated using the first and second basic codes and data Dn about the distance traveled before the previous stop of the vehicle and the traveled distance data Dn-1; when between the remote control unit 2 and the on-board unit 3 the second rolling code is checked, the start of the vehicle engine is permitted.
    また、第1、第2の基本コードと、前回車両が停止した際の走行距離データDnと前述の走行距離データDn-1とを用いて第2のローリングコードを生成し、遠隔ユニット2と車載ユニット3との間で該第2のローリングコードの照合が確認された際に、車両のエンジンの始動を許可する。 - 特許庁
  • In a process for manufacturing a product 1, this manufacture history information recording device of products converts manufacture history information generated in assembly, adjustment, measurement, and inspection processes into a two-dimensional code 3, and attaches or adheres the printed matter of the converted two-dimensional code 3 to the product 1.
    本発明の製品の製造履歴情報記録装置は、製品1を製造する過程において、組立、調整、測定、検査等の工程で発生した製造履歴情報を2次元コード3に変換し、この変換した2次元コード3を印刷したもの4を製品1に添付するまたは貼り付けるように構成したものである。 - 特許庁
  • A normal equation adding circuit 29 executes an arithmetic processing based on data segmented by an area segmenting part 26, a class code generated by the processings of an ADRC circuit 24 and a class code generating circuit 25 and the 100 Hz progressive picture to be supplied via the delay circuit 28.
    正規方程式加算回路29は、領域切り出し部26によって切り出されるデータと、領域切り出し部23、ADRC回路24およびクラスコード発生回路25による処理によって生成されるクラスコードと、遅延回路28を介して供給される100Hzプログレッシブ画像とに基づく演算処理を行う。 - 特許庁
  • In encoding, a remainder is obtained by performing division to numeric values expressed by a plurality of information symbols, the remainder is expressed by a plurality of intermediate symbols, an error correction code word is generated by adding inspection symbols to the plurality of intermediate symbols and the plurality of information symbols and the error correction code words are output.
    符号化では、複数の情報シンボルにより表される数値に対して除算を施すことにより剰余を得て、剰余を複数の中間シンボルで表し、複数の中間シンボルに検査シンボルを付加することにより誤り訂正符号語を生成し、複数の情報シンボルと誤り訂正符号語とを出力する。 - 特許庁
  • The portable telephone set is provided with an infrared remote control hardware block for generating a pulse code for remote control by using a system CPU and a system clock and for modulating the pulse code for remote control into a carrier and an infrared light emitting part for sending the carrier generated by the relevant infrared remote control hardware block to an object.
    携帯電話機に、システムCPUとシステムクロックとを使用して、リモコン用パルスコードを生成し、該リモコン用パルスコードを搬送波に変調する赤外線リモコンハードウェアブロックと、当該赤外線リモコンハードウェアブロックにより生成された搬送波を対象物に送出する赤外線発光部と、を備えて構成する。 - 特許庁
  • Since a 16-bit code being a basic configuration of a PSC and an SSC generated from a code generating circuit 170 as inverse spread codes has a constant repetitive characteristic in positive bits and negative bits, each of 16-sets of the arithmetic circuits can apply correlation processing to received data respectively deviated by one chip.
    コード発生回路170が逆拡散コードとして発生するPSC及びSSCの基本構成である16ビットコードは、正極性のビットと負極性のビットとの繰り返し特性が一定であるので、16個の演算回路それぞれにおいて1チップずらした受信データに対して相関処理を行うことができる。 - 特許庁
  • Group complexity is calculated on the basis of data of an encoding parameter regarding an image of a scene change and its following images when the scene change occurs, an assigned code amount is designated in accordance with the group complexity, image data are encoded for each image so as to reach the assigned code amount, and encoded data are generated.
    シーンチェンジが発生した場合にそのシーンチェンジの画像以降の画像についての符号化パラメータのデータに基づいてグループ複雑度を算出し、グループ複雑度に応じて割り当て符号量を指定し、割り当て符号量になるように画像データを画像毎に符号化して符号化データを生成する。 - 特許庁
  • When it is judged that the password data α and the verification data α' match, an encryption QR code Qb is read and decoded, encrypted data β' decoded by using a decipher key provided in a QR code reader 20' is decoded, and plaintext data β is generated and output to the host computer 10.
    そして、暗証データαと照合データα’とが一致すると判断した場合には、暗号化QRコードQbを読み取ってデコードし、さらにQRコードリーダ20’が備える復号鍵を用いてこのデコードされた暗号データβ’を解読して平文データβを生成してホストコンピュータ10に出力する。 - 特許庁
  • A second data area 62 of the QR code 50 is decoded based on image data generated according to a light reception result from a light reception sensor 28 having received the reflection light of the QR code 50 in a state that the image forming lens 27 is moved so that focusing is performed according to the distance X.
    そして、この距離Xに応じて合焦させるように結像レンズ27が移動された状態において、QRコード50の反射光を受光した受光センサ28からの受光結果に応じて生成された画像データに基づいて、当該QRコード50の第2データ領域62がデコードされる。 - 特許庁
  • The information code reading device picks up the image of an information code by an image pickup means, generates width value frequency distribution about the width value of a bright color area or a dark color area after binarization in an image configured of the image data, and further detects the distribution characteristics of the generated width value frequency distribution.
    情報コード読取装置は、撮像手段によって情報コードを撮像すると共に、その画像データによって構成される画像において、二値化後の明色エリア又は暗色エリアの幅値についての幅値度数分布を生成し、更に、その生成された幅値度数分布の分布特徴を検出している。 - 特許庁
  • The disclosed method and means includes: a monitoring part which selectively extracts data to check fault freedom if the data are transmitted from the outside; an engine part which generates an error check code using a suitable CRC generation polynomial or checksum in accordance with a communication protocol of the extracted data; and a register which stores the generated error check code.
    外部からデータが伝送されれば、無欠性を検査すべきデータを選別的に抽出するモニタリング部と、抽出したデータの通信プロトコルに応じて適したCRC生成多項式やチェックサムで誤りチェックコードを発生するエンジン部と、発生された誤りチェックコードを貯蔵するレジスタとを含む。 - 特許庁
  • A code-quantity detecting section 151 detects the quantity of data of encoded data generated by each encoding processing section 171 to 173, and a code-quantity comparison section 161 compares the quantity of data of each encoded data and outputs a control signal indicating either of the encoded data in the minimum data quantity to a selector 141.
    符号量検知部151は、各符号化処理部171乃至173で生成された符号化データのデータ量を検知し、符号量比較部161は各符号化データのデータ量を比較し、最小データ量の符号化データがいずれであるのかを示す制御信号をセレクタ141に出力する。 - 特許庁
  • For a reference quantization coefficient determined from the generated code amount fed back from an entropy encoding circuit 28, image compressibility and target code amount, etc., the quantization coefficient for the encoding object block is changed, in accordance with the prediction mode determined for an encoding block, immediately in front of the encoding object block.
    エントロピー符号化回路28からフィードバックされる発生符号量、ピクチャ圧縮率及び目標符号量などから決定される基準量子化係数に対し、符号化対象ブロックの直前の符号化ブロックに対して決定された予測モードに従い、符号化対象ブロックに対する量子化係数を変更する。 - 特許庁
  • Among candidates of code words in which a product with a first sparse matrix becomes a zero matrix, and a product with a second sparse matrix becomes information, the one whose input probability distribution becomes largest is selected by optimization algorithm, and the selected candidate is generated as a code word of the information to information for transmission.
    送信対象の情報に対して、第一の疎行列との積が零行列となり、かつ第二の疎行列との積が情報となる符号語の候補の中で、入力確率分布が最大となるものを最適化アルゴリズムによって選択し、当該選択された候補を当該情報の符号語として生成する。 - 特許庁
  • In the image sensor, a ramp signal formation portion compares a digital target code with a references code, and the comparison result forms the ramp signal and feeds back generated ramp signal VRAMP to a CDS circuit array in a main single inclination ADC and a single inclination ADC in a ramp signal generating portion, at the same time.
    イメージセンサでは、ランプ信号生成部が、デジタル目標コードと基準コードとを比較して、その比較結果によってランプ信号を生成し、生成されたランプ信号VRAMPをメイン単一傾斜ADC内のCDS回路アレイと、ランプ信号生成部内の単一傾斜ADCとに同時にフィードバックする。 - 特許庁
  • A picture display device driving circuit 15 for expressing the gradation of the picture on a display panel 18 by the pulse width of pulse waveforms corresponding to digital picture data generated by a waveform generation part 14 decodes a gamma characteristics control code by a gamma characteristics control code decoder 16 and generates gamma characteristics control voltage corresponding to the gamma characteristics control code by a controlled voltage generation circuit 17 to control the gradation characteristics.
    波形発生部14にて発生したデジタル画像データに応じたパルス波形のパルス幅により、表示パネル18における画像の階調を表現する画像表示装置駆動回路15において、ガンマ特性制御コードをガンマ特性制御コードデコーダ16によりデコードし、制御電圧発生回路17によりガンマ特性制御コードに応じたガンマ特性制御電圧を発生させ階調特性を制御する。 - 特許庁
  • The display control unit 62 causes the display means 4 to display the matrix two-dimensional codes by synthesizing the image information stored in the video memory with the matrix two-dimensional codes generated at the code generation unit 61.
    表示制御部62は、ビデオメモリに記憶された画像情報に、コード生成部61にて生成されたマトリクス型二次元コードを合成することで、表示手段4にマトリクス型二次元コードを表示させる。 - 特許庁
  • When heat generating wires 2a, 2b of the first and the second code elements 10, 20 are connected in series or parallel to carry current, a magnetic field generated at each heat generating wire is negated by each other.
    第1および第2のコード要素10,20の発熱素線2a,2bを直列または並列に接続して通電したときに各発熱素線の発生する磁界が互いに打ち消されるように構成されている。 - 特許庁
  • To provide a protection controller allowing reference to a value in an optional part inside a sequence without changing a code configuration of a program generated from a sequence diagram representing contents of sequence control.
    シーケンス制御の内容を表したシーケンス図から生成したプログラムのコード構成を変更することなく、シーケンス内部の任意の箇所で値を参照することができる保護制御装置を得ることを目的とする。 - 特許庁
  • A source code memory section 20 is registered with a plurality of source codes F1-Fn before regeneration generated, based on design information before the change of design information B and the template A.
    ソースコード記憶部20には、設計情報Bの更新前の設計情報である更新前設計情報と、テンプレートAとに基づいて生成した複数の再生成前ソースコードF1〜Fnが登録されている。 - 特許庁
  • To easily adjust the relative position of a hard printed board and a brush, as for a lens barrel wherein a prescribed electric signal is generated by making a code pattern formed on the hard printed board and the brush rub each other.
    硬質プリント基板上に設けられたコードパターンと、該コードパターンとブラシが摺接することにより、所定の電気信号を発生するレンズ鏡筒において、硬質プリント基板とブラシの相対位置の調整を容易にする。 - 特許庁
  • A server machine 26 sends a two-dimensional bar code generated by ciphering a facial portrait, unciphered text data, etc., in the form of a print signal to a mobile printer 13 of the customer 10 through a portable telephone network 11 and a portable telephone 12.
    サーバーマシン26により、顔写真を暗号化した二次元バーコードと暗号化しないテキストデータ等をプリント信号にして携帯電話回線網11,携帯電話12を通して顧客10のモバイルプリンタ13に送る。 - 特許庁
  • A base station having a plurality of sectors each transmitting a signal consisting of a plurality of frames generates a signal, spreads the generated signal using a long code and then transmits the spread signal.
    複数のセクタを有し、当該複数のセクタの各々において複数のフレームからなる信号を送信する基地局は、信号を生成し、生成した信号をロングコードを用いて拡散し、拡散した信号を送信する。 - 特許庁
  • A client 1 outputs R'G'B' raster data with Tag obtained by imparting the Tag based upon code image data to R'G'B' raster data generated by rasterizing and color converting RGB vector data corresponding to the document image.
    クライアント1は、文書画像に対応するRGBベクトルデータをラスタライズ、色変換したR’G’B’ラスタデータに、コード画像データに基づくTagを付与して得られたTag付きR’G’B’ラスタデータを出力する。 - 特許庁
  • Furthermore, the system control part 111 specifies a detailed error condition of the error generated in the printing engine 112 from the error code detected and the operation record information 300 obtained from the printing engine 112.
    また、システム制御部111は、検出されたエラーコードと、印刷エンジン112から取得した動作実績情報300とに基づいて、印刷エンジン112で生じたエラーの詳細なエラー状態を特定する。 - 特許庁
  • In document recognition processing for converting character image data in image data into character code data, the character image data in the image data are extracted and whether a color change is generated in the extracted character image data or not is detected.
    画像データ中の文字画像データを文字コードデータに変換する文書認識処理において、画像データ中の文字画像データを抽出し、抽出された文字画像データ中の色変化の有無を検出する。 - 特許庁
  • Thereby, in the optical information reproducing device, the code sequence C corresponding to two recording marks which should be essentially recorded can be generated even when merged recording marks are formed in the optical information recording medium.
    従って光情報再生装置は、光情報記録媒体に融合記録マークが形成されていたとしても、本来記録されるべき2つの記録マークに相当する符号列Cを生成することができる。 - 特許庁
  • A code output abbreviation means 136 counts one or more numbers of continuation of codes which can not be stored in the coding FIFO memory 123 due to a lack of free space among the generated codes as a skip number.
    符号出力省略手段136は、生成された符号のうち、空き容量不足により符号化FIFOメモリ123に格納できなかった符号の1以上の連続数をスキップ数として計数する。 - 特許庁
  • The display control means 220 detects the imaged size, position and orientation of a code image included in the camera image data and adjusts the size, position and orientation of the label image to be generated based on these detection values.
    表示制御手段220は、カメラ画像データに含まれるコード画像の撮影サイズ、位置、および向きを検出し、これらの検出値に基づいて生成するラベル画像の大きさ、位置、および向きを調整する。 - 特許庁
  • A frequency modulated or a phase modulated electric signal S2 is generated in a wireless power supply apparatus 200 in accordance with a transmission side code CODE1 predetermined with a wireless power receiving apparatus 300.
    ワイヤレス給電装置200においてワイヤレス受電装置300との間であらかじめ取り決められた送信側コードCODE1に応じて周波数変調または位相変調された電気信号S2を生成する。 - 特許庁
  • During non image display period, one code of the run length coding image data is decoded for each cycle of the system clock, and the decoded data are generated only one time, regardless of the number of continuous pixels of the decoded data.
    更に、この非画像表示期間では、システムクロックの1サイクル毎にランレングス符号化された画像データの1コードを復号して、その復号データを、その復号データが連続する画素数に拘わらず1回のみ出力する。 - 特許庁
<前へ 1 2 .... 21 22 23 24 25 26 27 28 29 .... 32 33 次へ>

例文データの著作権について