When a low frequency signal is inputted from a low-frequency transmitter 10 to the side to which the capacitors C of the transformers T1a, T2a are not connected, loop currents 13, 14 are excited, and an induced current flows in coils of the transformers T1a, T2a. そして、トランスT1a、T2aのコンデンサCが接続されていない側に低周波発信器10から低周波信号が入力されると、ループ電流13,14が励起され、トランスT1b,T2bのコイルに誘起電流が流れる。 - 特許庁
The left/right end parts 36 and 36 of the lumbar pat 3 are provided with first lumbar part buckle members 41 and 41, and left/right side parts 40 and 40 of the protector body 1 corresponding to the lumbar are provided with attachment pat pieces 6 and 6, whose attachment positions are freely changeable, attached/detached with a hook-and-loop fastener. 腰パット3の左右端部36,36に第1腰部バックル部材41,41が設けられると共に、プロテクター本体1の腰対応左右側部40,40に取付位置変更自在として面状ファスナをもって着脱される取着パット片6,6を備える。 - 特許庁
The upper ends of the shoulder straps (40, 40) are connected with a connection piece (41), and wrapping cloth pieces (46) wound on the belt keepers (22) for fitting the shoulder straps and having Hook-and-Loop fasteners (42a and 42b) provided and a wrapping and superposing part are fitted to this connection piece (41). また、背負帯(40,40)の上端は連結片(41)で連結し、この連結片(41)には前記背負帯取付用帯片(22)に巻き付け、巻き付け重合部に面ファスナー(42a,42b)を設けた巻付生地片(46)を取り付ける。 - 特許庁
To specify a faulty disk unit at early stage by selecting a disconnection sequence of a disk unit, on the basis of a fault history of each disk unit and disconnecting the disk unit in the order of setting from a loop on the occurrence of a fault in a link. 各ディスク装置の障害履歴に基づいてディスク装置の切り離し順序を設定し、リンク障害発生時には設定した順にディスク装置をループから切り離していくことで、障害発生ディスク装置を早期に特定する。 - 特許庁
To permit the formation of a bonding wire connecting a long wiring distance with a low loop height, so that the wire will not be contacted with a chip angle upon bonding it by pressure at a second bonding point, and a distance becomes short as much as possible between the chip and the second bonding point. 長い配線距離を低いループ高さで接続するボンディングワイヤが、第2ボンド点で圧着を行なう時にチップ角に触れることなく、かつ、チップと第2ボンド点の間の距離ができる限り短くなるように形成することを可能とする。 - 特許庁
Consequently, a standing-wave is formed in the loop-like element 9, a node 21 of a current standing-wave 20 is located at a position separated from the power supply unit by 1/4 wavelength, and an anti-node 22 of the current standing-wave 20 is located at a position separated from the power supply unit by 1/2 wavelength. すると、ループ状エレメント9に定在波が形成され、給電部から1/4波長離れた位置では電流定在波20の節21となり、給電部から1/2波長離れた位置では電流定在波20の腹22となっている。 - 特許庁
Thereby, a pair of small pieces of hook-and loop fastener is prepared and these grips are mutually utilized or the removing part is peeled and the remaining second grip part is attached to an adequate position of the surface to be attached and the second grip part is peeled and an attaching material is pressed. これによって、面ファスナ小片の一対を作ってつまみ部を相互に利用するか、撤去部分を剥ぎ上げて、残る第2つまみ部を持って貼付対象面の適当位置に貼り付け、第2つまみ部を引き剥いで圧着することができる。 - 特許庁
Therefore, if only an operator inputs a desired button height to the setting means, the control means drives the thread lift rod moving means to make a thread loop above the button, which offers better operability in thread lift sewing. 従って、作業者は設定手段に所望のボタン高さを入力するだけで制御手段が糸浮かし棒移動手段を駆動してボタンの上方に糸ループを形成するので、糸浮かし縫製作業の作業性を向上させることができる。 - 特許庁
The partitioning portion 20 takes the shape of a band projecting into he dustproof mask 10, and has at each end with a strap member 21 and a retaining member such as a hook-and-loop fastener so as to be positioned to partition the nose and mouth mask portions 16 and 18 between the nose and mouth. 仕切部20は、帯状に防塵マスク10の内側に突出して形成され、この仕切部20の両端に紐部材21や面ファスナ等の保持部材22を設け、鼻と口の間で鼻マスク部16と口マスク部18の空間を仕切る。 - 特許庁
A burglarproof key switch 1 is connected into a closed loop, which a burglarproof receiver forms through the normally-closed contact of a burglarproof sensor, and is provided with a setting means 10 which sets the burglarproof precaution set state, the burglarproof precaution reset state, and the alarm test state by switching. 防犯キースイッチ1は、防犯受信機が防犯センサの常閉接点を介して形成する閉ループ内に接続され、防犯警戒セット状態、防犯警戒リセット状態、警報テスト状態を切替設定する設定手段10を備える。 - 特許庁
Fastening pressure is controlled by means of a closed loop, and furthermore, fastening pressure within the chamber is corrected, and the maintenance of pressure of the specified period of time is nullified by the request of an operator correcting fastening pressure applied to a work. 前記締付け圧力は閉ループにより制御され、かつ前記室内の締付け圧力が修正されて、前記圧力の維持を所定の時間の間、前記加工物に加えられた締付け力修正の作業者からの要請に応じて無力化する。 - 特許庁
The connecting means 7 is formed of a sliding fastener or a male/female hook-and-loop fastener and the air bag body 1 is disposed with a plurality of reinforcing parts 8 into a bridging state so as to prevent the fracture of the air bag body 1 beforehand in inflating by air feed. 連結手段7は、スライドファスナーもしくは雄雌面ファスナー等によって形成し、空気袋体1の内部には、給気膨張の際の当該空気袋体1の破裂を未然に防止すべく複数の補強部8を架橋状に配設する。 - 特許庁
In the case that a network synchronization device M2 supplies a master clock signal through a loop network and is turned to a self-running operation by monitoring an operating state of a clock path of the two opposite network synchronization devices A4, C8, the device M2 switches the active clock path into a standby system. 網同期装置M2が、ループ網を通じてマスタクロック信号を供給し、対向する二つの網同期装置A4,C8のクロックパスの運用状況の監視で自走動作になった際に、クロックパスを現用系から予備系に切り替える。 - 特許庁
The sheet S separated one by one by means of a separating means 103A is brought into contact with a skew correction means 107 for correcting a skew by forming a loop, and then, the skew correction means 107 is driven to convey the sheet toward the image formation part. 分離手段103Aによって1枚ずつ分離されたシートSを、斜行補正手段107に当接させてループを形成することにより斜行補正した後、斜行補正手段107を駆動して画像形成部に向けて搬送する。 - 特許庁
A cloth blade 99 includes a cloth blade body 115 coming into contact with a floor face and removing dust on the floor face, and pull-out prevention sections 116 and 117 located on both end sides of the cloth blade body 115 and fitted to the fitting sections 104 and 105 to fold back the cloth blade body 115 into a loop shape. 布ブレード99が、床面に接触可能で床面の塵埃を除去する布ブレード本体115と、布ブレード本体115の両端側に、布ブレード本体115をループ状に折り返すように嵌着部104,105に嵌着する抜止部116,117とを備える。 - 特許庁
Moreover, even when the capacitance of rectifier capacitor in the secondary side of transformer of the intermittent control auxiliary power supply is large and there is not discharge loop, voltage can be discharged momentarily when the main power supply switch is turned OFF by operating a dummy load. また、間欠制御補助電源装置のトランス2次側整流コンデンサの容量が大きく放電ループがない場合にも、主電源スイッチオフ時、スイッチに連動して擬似負荷を動作させることで瞬時に電圧を放電できるような構成にした。 - 特許庁
The introduction of asymmetry (via an asymmetric coupler, splice, attenuator, fiber bend, multiple amplifying sections, or the like) allows for an accumulation of a phase difference within the bi-directional loop sufficient to create modelocking and generate the ultrashort output pulses. (非対称の結合器、接合、減衰器、ファイバの曲げ、多重増幅部、あるいは類似のものによる)非対称の導入はモードロックを生成し、超短出力パルスを発生させるために十分な双方向ループ内への位相差の蓄積を可能にする。 - 特許庁
The surface protective film includes a base material layer of polyolefin, and an adhesive layer, wherein the hardness (Martens hardness) of the adhesive layer is at least 1 N/mm^2 and at most 2.5 N/mm^2, and the loop tack is at least 0.02 N/25 mm and at most 0.1 N/25 mm. 表面保護フィルムは、ポリオレフィン系の基材層と、粘着層とを備え、前記粘着層の硬度(マルテンス硬さ)が1N/mm^2以上2.5N/mm^2以下であり、ループタックが0.02N/25mm以上0.1N/25mm以下である。 - 特許庁
In a closed loop blank mold temperature control system, the thermal state 112 of a blank mold is measured by a measuring system 114, the temperature measured value 116 is then reduced from the temperature set value (setpoint), and the error 122 is supplied to a controller 124. 閉ループのブランク金型温度制御システムにおいて、ブランク金型の熱状態112を測定システム114により測定し、該温度測定値116を温度設定値(セットポイント)から減算し、その誤差122をコントローラ124に供給する。 - 特許庁
A representative path timing calculation section 105 uses the a(n) and the Ave (|a(n)|2) to output the representative path timing value such as power weight of a path to control the spread code generator 108 via a loop filter 106 and a clock control section 107. 代表パスタイミング算出部105は、a(n)及びAve(|a(n)|^2)により、パスの電力重心等の代表パスタイミング値を出力し、ループフィルタ106及びクロック制御部107を介して、拡散符号発生器108の制御が行われる。 - 特許庁
On the front surface of the mat A molded by stacking a large number of synthetic resin filament 1 in the state of a loop, crushed grains 3 of 15 to 18 mesh are sprayed and stuck by the distribution rate of 50 to 150 g/m^2 through an adhesive 2. 多数の合成樹脂フィラメント1をループ状に堆積して成形される敷きマットAの表層に、接着剤2を介し15〜80メッシュの粉砕粒体3を50〜150g/m^2の分布割合で散布して付着させた構成からなる。 - 特許庁
In order to use a line sensor having shallow depth of field, this medium position detecting mechanism for an image forming device is structured to warp the medium to be carried into a loop shape, and structured to always make the medium abut on a sensor surface of the line sensor when obtaining the medium position attitude information. 本発明は、被写界深度の浅いラインセンサの使用を可能にするために、搬送される媒体をループ形状に撓ませ、媒体位置姿勢情報を得る際、常にラインセンサのセンサ面に媒体を当接させる構成とした。 - 特許庁
Moreover, when a timing error detector 30 detects deviation between a symbol point of the output signal from the variable FIR filter 26 and a desired symbol point, control (feedback control) of the processing in the interpolater 16 is conducted through a loop filter 32 and an NCO34. また、タイミングエラー検出器30で、可変FIRフィルタ26からの出力信号のシンボル点と所望のシンボル点とのずれを検出すると、ループフィルタ32、NCO34を介して、インターポレータ16における処理の制御(フィードバック制御)を行う。 - 特許庁
The floor mat 18 is constituted by attaching Hook and Loop fasteners 14 and 15 to the four side surfaces of the circumference of a square porous base 11 of a thickness of 10-50 mm with a cushion property of which the surfaces are coated with flexible face sheets 12. 表面が可撓性を有する化粧シート12で被覆された厚さが10〜50mmのクッション性を有する正方形の多孔質ベース11の周囲の四側面に面ファスナー14・15を取り付けて床敷マット18を構成する。 - 特許庁
Furthermore, the digital line terminator is provided with a start control circuit 35 that holds the start circuit 32 in a way that no DC loop is closed when no reply comes from the terminal at start and controls again the start circuit 32 as required so as to be again started. また、起動時に端末からの応答が無い場合は直流ループを閉成しないように起動回路32を保持し、必要に応じて再び起動可能となるように起動回路32を制御する起動制御回路35を備えている。 - 特許庁
The tip fixing member 19 is formed by connecting a needle part 19b inserted in a celoma internal wall, to a body part 19a, and the loop part is connected in such a way that the tip is partially embedded in the body part 19a. この先端固定部材19は本体部19aには体腔内壁に差し込まれる針状部19bを連設してなるものであり、ループ部12aの先端の一部分は、この本体部19a内に埋設するようにして連結されている。 - 特許庁
The PLL circuit is provided with a temperature sensor, an A/D converter (ADC) for converting an output signal of the temperature sensor into a digital signal, and a suppression circuit for suppressing temperature fluctuation of a PLL loop band with the output signal of the ADC. と上記PLL回路として、温度センサーと、上記温度センサーの出力信号をデジタル信号に変換するADCと、上記ADCの出力信号によりPLLループ帯域の温度変動抑制を行う抑制回路を設ける。 - 特許庁
This increase in the rotational speed gain 2 does not change the responsiveness of a closed loop but increases the effect of controlling disturbance forces by the rotational speed control gain, that is, (1+J_L/J_M), resulting in a 50% or more increase in control accuracy over conventional methods. この回転速度ゲイン2の増大によって、閉ループの応答は変化がないが、外乱力の抑制効果は回転速度制御ゲイン分、すなわち(1+J_L/J_M)大きくなり、制御精度が従来に比べて、50%以上、向上する。 - 特許庁
To provide a stator structure for axial gap type dynamo-electric machine which can suppress eddy current loss, in its turn, the increase of iron loss, by suppressing a loop current which is generated at the contact part between the lamination face of stator teeth and the lamination face of a stator back core. ステータティースの積層面とステータバックコアの積層面との接触部分に発生するループ電流を抑制して、渦電流損失ひいては鉄損の増大を抑制することができるアキシャルギャップ型回転電機のステータ構造を提供する。 - 特許庁
Since this translocation loop defective layer 19 suppresses the dose loss of impurity atoms which form the p-type extension high concentration diffused layer 16, the drop of the driving force of a transistor is suppressed, and a MIS-type transistor with a short gate can be achieved. この転位ループ欠陥層19により、P型エクステンション高濃度拡散層16を形成する不純物原子のドーズロスが抑制されるため、トランジスタの駆動力の低下が抑制され且つ短ゲート長のMIS型トランジスタを実現できる。 - 特許庁
To provide a battery device that has such an advantage that the power supply loop can be precisely cut off and the safety of the device can be secured when the battery is heated abnormally, and that can be used repeatedly and can be formed in small size, and a digital camera. 電池が異常発熱したとき電源供給ループを的確に遮断することができ装置の安全を図ることができる、反復使用することが可能である、小型に形成できる、等の利点を持つ電池装置及びデジタルカメラを提供。 - 特許庁
A loop material 20, whose length exceeds twice the interval between supports 10, is slidably moored to at least one mooring part 11 which is provided on each of the supports 10, so that the shock absorbing fence can be constructed between the mutually adjacent supports 10 and 10. 隣り合う支柱10,10の間に、支柱10の間隔の二倍を超える長さのループ材20を、各支柱10に設けた少なくとも一箇所の係留部11にスライド可能に係留して衝撃吸収柵を構成する。 - 特許庁
A frequency modulation circuit 1 reduces noise in the frequency band which requires low noise with the bandpass type delta sigma modulation section 15 and the LPF 16, and reduces noise in the vicinity of a direct current component DC with a feedback comparison section 11 and a loop filter 12. 周波数変調回路1は、バンドパス型デルタシグマ変調部15とLPF16とで低雑音が要求される周波数帯域の雑音を低減し、フィードバック比較部11とループフィルタ12とで直流成分DC付近の雑音を低減する。 - 特許庁
When the position of at least one of the above two knobs changes before this reproduction gets to the phrase end, the change in position is not reflected before the reproduction gets to the phrase end, but is reflected when the reproduction moves to loop reproduction (steps S30→S320→S22). この再生がフレーズエンドに到達する前に、上記2個のつまみのうち少なくとも一方のつまみの一が変化したときには、その位置の変化は、前記再生がフレーズエンドに到達するまでは反映されず、当該再生がループ再生に移行する際に反映される(ステップS30→S32→S22)。 - 特許庁
This synthetic fiber cord for reinforcing rubbers, comprising the twisted union yarn of synthetic filament yarns not having a fuzz or loop on the surfaces with synthetic filament yarns having fuzz or loops on the surfaces, is characterized in that the tensile strength of the synthetic filament yarns having the fuzz or loops on the surfaces is ≥5.0 cN/dtex. その表面に毛羽又はループを有さない合成繊維連続フィラメント糸と、その表面に毛羽又はループを有する合成繊維連続フィラメント糸との合撚糸であって、該毛羽又はループを有する合成繊維連続フィラメント糸の引張強度が5.0cN/dtex以上である。 - 特許庁
A test data pattern is transmitted from the electronic circuit cards 130, 140 to the electronic circuit card 150 at the next stage while changing delay time of the variable delay elements 134, 144 in step to judge propriety of the test data pattern returned from the electronic circuit card 150 at the next stage via a loop return path. 可変遅延素子134、144の遅延時間を段階的に変えながら、試験データパターンを電子回路カード130、140から次段の電子回路カード150に送信し、次段の電子回路カード150からループリターンパスを経由して返信された試験データパターンの正否を判定する。 - 特許庁
To provide a coreless coil and its manufacturing method capable of taking out each wire by decreasing generation of a loop-form entanglement part in the wire on the way of taking out the wire at the time of using the coreless coil and of enhancing the rate of operation of the facility which uses coreless coil. コアレスコイルの使用時に、線材の取り出し途中で線材にループ状絡み部が生じるのを減少させて線材を円滑に取り出すことができると共に、コアレスコイルを使用する設備の稼働率を高めることができるコアレスコイル及びその製造方法を提供する。 - 特許庁
In the semiconductor laser device, having the window structure area formed by making random the active layer of the quantum well structure through the implantation of silicon ions and following heat treatment; no transition loop practically exists in the window structure region 10a and the neighborhood (upper clad layer 9a). シリコンイオンの注入、及びその後の熱処理により量子井戸構造の活性層を無秩序化して形成された窓構造領域を有する半導体レーザ装置において、窓構造領域10a及びその近傍(上クラッド層9a)には転位ループが実質的に存在しない。 - 特許庁
At such a time, since flexibility is given to the flexible printed circuit board by the excess-length loop 701 though another board 704 is fixed in the camera, the rotation around the optical axis of the photographic optical system is restrained when the circuit carrier-sensor attaching part 505 is driven to be translated. このとき、他の基板704はカメラに固定されているが、余長ループ701によりフレキシブルプリント基板に柔軟性が与えられているため、回路キャリア・センサ取り付け部505が並進駆動される際に撮影光学系の光軸回りの回転が抑制される。 - 特許庁
Further, the attached small band for fixing the entire gore parts 2 by rolling up the gore parts rolled around a rod 6 of the closed umbrella 1 at one spot in axial direction is made of a loop-shaped material, which is fixed in almost the same size along the outer periphery of the closed umbrella 1, elastic and easy to deform. さらに、閉じた洋傘(1)の軸(6)の周辺に巻きつけた布地部(2)の、軸方向一ヵ所に巻きつけて全体を固定する付属の小帯は、閉じた洋傘(1)の外周にほぼ同じ大きさの固定した円環状で、しかも、弾力性があって変形が容易な材料とする。 - 特許庁
Since the structure of a front wheel fork 2 contains a forward self-rotating element, the structure is formed so that the diameters of the front and rear wheels are different from each other and a frame 3 is formed in a loop structure, and the column of the rear wheel axle is formed in the structure of a fork 11 so as to increase a running performance. 又、それとともに前輪フォーク2の構造が自ずから前転の要素を含んでいることに着眼して、その構造を前後輪の径の差、フレーム3のループ構造、そして後輪車軸の支柱を更にフォーク11の構造として、もって走行性能を高めた。 - 特許庁
This mask includes: a mask body covering the mouth of the face; and ear loop parts provided on both right and left of the mask body to engage with the ears, wherein the mask has a plurality of pleats folded so that pleats are produced in the vertical direction of the mask body. 顔面の口元を覆うマスク本体と、前記マスク本体の左右両側に設けられた耳に係合される耳掛け部とからなるマスクであって、前記マスク本体の上下方向に折り目が生じるように折り畳んだ複数の折りひだを有していることを特徴とするマスク。 - 特許庁
Particularly the outer circumferential part of the circular sub diaphragm 4 is joined by a joining part 5 along a loop part between nodes in the vibration mode (secondary resonance mode) wherein two vibration nodes are concentrically formed to the center of the circular diaphragm 1 in the higher-order vibration modes of the circular diaphragm 1. 特に、円形振動板1の高次振動モードのうち、円形振動板1の中心に対し振動の節が同心円状に2箇所出来る振動モード(二次共振モード)における節間の腹の部分に沿って、円形サブ振動板4の外周部が接合部5により接合されている。 - 特許庁
Magnetic flux φ3 generated as a current flows to the coil W3 and magnetic flux φ4 generated as a current flow to the coil W4 are set to have the same polarity on a loop path including the leg 16, the connection part 20, the leg 18, and the connection part 22. コイルW3に電流が流れることで生じる磁束φ3と、コイルW4に電流が流れることで生じる磁束φ4とは、足16、接続部20、足18および接続部22を備えるループ経路において同一極性となるように設定されている。 - 特許庁
To prevent the deterioration of actual performance due to the generation of a request for invalidating cache by preventing the false sharing, wherein different processors update the values of arrayed elements included in the same cache line at the time of the conventional loop scheduling for parallel executing compilers for a shared memory type parallel computer. 共有メモリ型並列計算機向けの並列化コンパイラにおける従来のループスケジューリングでは、異なるプロセッサが同一のキャッシュラインに含まれる配列要素の値を更新するフォールスシェアリングが起こり、キャッシュの無効化要求が発生して実行性能が低下する。 - 特許庁
On the other hand, after finishing synchronization of the second code, the accumulation period of the correlation processing of carrier and the correlation processing of the first code is switched to an accumulation period of correlation processing longer than a bit period of the second code while carrier tracking is switched from Costas to PLL (phase locked loop). また、第2コードの同期の完了後に、キャリアの相関処理及び第1コードの相関処理における加算期間を第2コードのビット周期より長い相関処理の加算期間に切替えると共に、キャリア追尾をコスタスからPLLに切替えることを特徴とする。 - 特許庁
In the RF communication module with a first antenna and the RF chip and a structure of the antenna with a second antenna for communication, the second antenna consists of a single loop formed in at least two fields of the structure of the RF chip and the antenna, and is connected with one radio frequency chip. 第1アンテナを有するRF通信モジュールとRF通信のための第2アンテナを有するRFチップとアンテナの構成物において; 前記第2アンテナがRFチップとアンテナの構成物の少なくとも二つの面に形成された単一ループで構成されて一つのRFチップに連結されることを特徴とする。 - 特許庁
The elastic wire is curved and bent to form the loop-like inner ring part 1 and the outer ring part 2 and a connecting part 3 connecting both ring parts 1 and 2 is made to be an unevenly meandering connecting part along a plane crossing at least at right angles to the face 4 of the inner ring part and the face 5 of the outer ring part of both ring parts. 弾性線材を回曲してル−プ状の内環部1と外環部2とを形成し、その両環部1,2を連結している連結部3は両環部の内環部面4や外環部面5と少なくとも直角に交差する面に沿って凹凸状にくねった連結部3とした。 - 特許庁
Wires 12A, 12B are once contacted with a stud bump 11, the wires 12A, 12B are formed into a loop shape by controlling the movement of a capillary 21, and then tip ends of the loops of the wires 12A, 12B are compressed against the stud bump 11 with the wires 12A, 12B having the stud bump 11 previously contacted therewith. ワイヤ12A,12Bをスタッドバンプ11に一度接触させ、キャピラリー21の移動を制御してワイヤ12A,12Bをループ状に形成した後、ループ先端のワイヤ12A,12Bを、スタッドバンプ11に先に接触しているワイヤ12A,12Bを介してスタッドバンプ11に圧着する。 - 特許庁
It is detected at a time T1 that a rear end of the document passes through a position of a paper feeding detecting sensor in the vicinity of a paper feeding roller, a rotating speed of the resist roller is gradually decelerated until a time T2 when the front end of the document reaches a post-reading roller, and the loop is canceled gradually until the time T2. 原稿の後端が給紙ローラ近傍の給紙検出センサの位置を通過したことが時刻T1で検出されると、原稿の先端が読取後ローラに達した時刻T2までレジストローラの回転速度を徐々に遅くして、時刻T2までは徐々にループを解消させる。 - 特許庁