「processing unit」を含む例文一覧(18564)

<前へ 1 2 .... 284 285 286 287 288 289 290 291 292 .... 371 372 次へ>
  • When abnormality is caused in the external signal 9a, an abnormality detection signal 9b is caused by the abnormality detection circuit 5 and sent to the sequence processing unit 1 and the servo control 2.
    外部信号9aに異常が生じた場合、異常検出回路5により異常検出信号9bが生じ、この異常検出信号9bはシーケンス演算部1およびサーボ制御部2へ送られる。 - 特許庁
  • The composites 12B, 12C or PC12D decide whether or not the requested divided jobs can be executed, and execute the divided jobs when they are executable, and transmit the processing result to the composite unit 12A.
    複合機12B、12CやPC12Dでは、依頼された分割ジョブを実行可能か否かを判断し、実行可能であれば分割ジョブを実行し、処理結果を複合機12Aに送信する。 - 特許庁
  • To provide an image processing unit for suppressing erroneous extraction of an appended portion indicating a portion to be concealed when concealing information in disclosure of a document.
    文書を公開するに際して、情報を隠蔽するような場合にあって、隠蔽する部分を示す追記部分を誤って抽出してしまうことを抑制するようにした画像処理装置を提供する。 - 特許庁
  • The depth of the unit processing part 145 should preferably consist in an embossing of a value between 5 and 15 mm approximately from the outside, and in particular in the case of 7-7.5 mm, the noise reducing effect will be still more excellent.
    単位加工部145の深さは外部から約5mm〜15mm間の値を持つエンボッシングであることが好まく,特に約7m〜7.5mm間の値を持つ場合,更に騒音低減効果が優れる。 - 特許庁
  • The put-out mechanism part includes: a tank for storing game balls; a tank rail and case rail for guiding the game balls guided out from the tank; and a ball-put-out unit for performing put-out processing of the game balls.
    払出機構部は、遊技球を貯留するタンクと、当該タンクから導出される遊技球を誘導するタンクレール及びケースレールと、遊技球の払出処理を行う球払出ユニットとを備えている。 - 特許庁
  • An ECU 100 sets a threshold for determining tire pneumatic pressure alarm processing according to the information on the wheel state transmitted from the wheel state detection unit 16 in response to the transmission request signal.
    ECU100は、送信要求信号に応答して車輪状態検出ユニット16から送信される車輪状態情報に基づいて、タイヤ空気圧警報処理の判定用閾値を設定する。 - 特許庁
  • A classify unit 201 selects a CPU 206, a routing NAT processing section 202 or a packet buffer 207 and gives a packet to a selected one, according to a procedure written in a classify rule table 203.
    クラシファイ装置201は、クラシファイルールテーブル203に書き込まれた手順に従って、パケットをCPU206、ルーティングNAT処理部202及びパケットバッファ207のいずれに与えるかの選択を行う。 - 特許庁
  • The job interpretation section 105 specifies the determined printing conditions to a fixing unit 109 and a conveyance section 110 to allow them to start the printing processing of the job following the productivity priority mode (S1205 and S1206).
    そして、ジョブ解釈部105が確定された印刷条件を定着器109と、搬送部110に指定して生産性優先モードに従うジョブの印刷処理を開始させる(S1205,S1206)。 - 特許庁
  • To prevent a transfer fault due to a 'memory full' state of image information between a storage means in an image processing unit and an external storage device having a CD-R in advance, to avoid a wasteful operation of the storage means, and to effectively utilize the storage means.
    装置内の記憶手段とCD-Rを持つ外部記憶装置間の画像情報のメモリフルによる転送失敗を未然に防止し、記憶手段に無駄な動作をさせず、有効活用を可能とする。 - 特許庁
  • To suppress occurrence of a state that an inlet heat medium temperature of a loading apparatus is largely fluctuated to a capacity reduction side of the loading apparatus in an increase processing for increasing the number of operation units in a heat source unit.
    熱源ユニットの運転ユニット数を増加させる増段処理の際に負荷機器の入口熱媒温度が負荷機器能力の低減側に大きく変動した状態になるのを抑止する。 - 特許庁
  • The position of the detected body 10 showing the maximum value is detected based on a result provided by subtraction processing between the reception levels of the two ultrasonic transmitters 4, 5 in a computing unit 8, in an edge position determining part 9.
    エッジ位置判定部9では、演算器8において2つの超音波受信器4,5の受信レベル間の減算処理が行われた結果から、最大値を示す被検出体10の位置を検出する。 - 特許庁
  • In a DVD reproducing device 1, digital signal processing is performed to a signal read from a disk 2 by an optical unit 7 at a front end 9 via a head amplifier 8 and the signal is outputted to a back end 10.
    DVD再生装置1では、光学ユニット7によってディスク2から読出された信号がヘッドアンプ8を介してフロントエンド9でデジタル信号処理されて、バックエンド10に出力される。 - 特許庁
  • As retrieval processing, a designated three- dimensional shape is surrounded, and a bounding box whose each face is made parallel with XY, YZ, and ZX face is generated, and the box is divided into unit cubes.
    検索処理として、まず、指定した3次元形状を囲み、各面がXY,YZ,ZX平面と平行なバウンディングボックスを生成して、そのボックス内を単位立方体を使い分割する。 - 特許庁
  • The DMAC 13 notices the data transfer completion by interruption to both a central processing unit(CPU) 11 of its own system and a CPU 21 of the other B system device 20 through an interrupting branch circuit 14.
    DMAC13はデータ転送完了通知を、割込み分岐回路14を介して、自系の中央処理装置(CPU)11とともに他系のB系装置20のCPU21に割り込み通知する。 - 特許庁
  • To provide an on-vehicle terminal and a communication unit which is superior in operability that wireless units can be miniaturized while corresponding to radio services and high signal processing speed is attained.
    複数の無線サービスに対応しながらも、無線装置の小型化を図るとともに、信号処理の高速化を図ることができ、さらに、使い勝手に優れた車載端末装置および通信機を提供する。 - 特許庁
  • A server processing unit 42 gathers measured values detected by the plurality of cable modems dispersedly installed on branch lines and the trunk line of a CATV transmission line 15 having a tree structure in a subscriber's house.
    サーバ処理部42はツリー構造をとるCATV伝送路15の加入者宅側の分配線及び幹線に分散設置された複数のケーブルモデムで検出された測定値を収集する。 - 特許庁
  • A control unit 11 detects pitches for each frame of a predetermined time length from singer voice data, generates pitch data representing the detected pitches, and performs filter processing for extracting a specified frequency component.
    制御部11は、練習者音声データから所定時間長のフレーム単位でピッチを検出し、検出したピッチを表すピッチデータを生成し、特定の周波数成分を抽出するフィルタ処理を施す。 - 特許庁
  • To provide a method of drilling a through-hole in a workpiece peripheral wall and a drilling device which can prevent burrs from occurring on the inner peripheral surface of a tubular unit, are high in productivity, and can significantly reduce processing cost.
    筒状部の内周面にバリが生じることを防止し、生産性が高く、加工コストを大幅に低減できるワーク周壁における貫通孔の穿設方法及び穿設装置を提供すること。 - 特許庁
  • An attenuation adjustment unit 530 adjusts the attenuation amount of the variable attenuator 310 such that the reception sensitivity for the test signal becomes the normal sensitivity when the reception circuit 330 performs reception processing of the combined signal.
    減衰調整部530は、受信回路330が合成信号を受信処理したときに前記テスト信号に対する受信感度が規定感度になるように可変減衰器310の減衰量を調整する。 - 特許庁
  • To easily discriminate the determination factor of the signal value of an external terminal in debugging software to be executed by hardware including a central processing unit and at least one input/output device by simulation.
    中央処理装置および少なくとも1つの入出力装置を含むハードウェアで実行されるソフトウェアをシミュレーションによりデバッグする際に、外部端子の信号値の決定要因の判別を容易にする。 - 特許庁
  • Therefore, if the frequency of the digital input signal is changed, a clock suited to the frequency is generated so as to improve the generality of the digital signal processing unit and the clock generation circuit.
    したがって、デジタル入力信号の周波数が変わっても、その周波数に適合するクロックを生成し、デジタル信号処理ユニットおよびクロック生成回路の汎用性を向上させることができる。 - 特許庁
  • In the period, an interpolation reproduction processing unit 26 alternately performs normal audio reproduction etc., and interpolation reproduction for reducing breaks of audio etc., using algorithm for packet loss concealment.
    そして、その期間においては、補間再生処理部26が、通常の音声再生等と、パケットロス隠蔽のためのアルゴリズムを用いた、音声等の途切れ低減のための補間再生と、を交互に実施する。 - 特許庁
  • A signal processing part 8 converts the analog pulse signals A to digital signals B with a binarization process, and outputs the digital signals to an ECU 18 (electronic control unit) as rotational speed detection signals.
    信号処理部8は、アナログパルス信号Aを二値化処理してディジタル信号Bに変換し、これを回転速度検出用信号として、車両のECU18(電子制御ユニット)に出力する。 - 特許庁
  • The heavy signal processing unit is not placed on the rear side of the reflector placed at a prescribed height but placed on a leg that supports the reflector via a frame with a prescribed height.
    所定の高さ位置に設けられた反射鏡の裏側ではなく、所定の高さを持つ架台を介して反射鏡を保持する脚部上に、重量物である信号処理装置を設けることとした。 - 特許庁
  • The seamless information recorded on an information recording medium remains unless the content recorded on the information recording medium is deleted, and the information processing unit can read the information anytime for utilization.
    情報記録媒体に記録されたシームレス情報は、情報記録媒体に記録したコンテンツを消去しない限り残存し、情報処理装置は、いつでも読み出して利用することが可能となる。 - 特許庁
  • This device is provided with a fingerprint reader 4 for reading the fingerprint of a passer-by 1 and a central processing unit (CPU) 7a for collating fingerprint data read by this fingerprint reader 4 with registered data 103 and 104.
    通行者1の指紋を読み取る指紋読取機4と、登録データこの指紋読取機4が読み取った指紋データ101と登録データ103、104とを照合する中央処理装置7aを備える。 - 特許庁
  • In unit processing with respect to the three hierarchies, the table definition module 110 refers to the lower order source data 10 to create a table frame T10 indicating a plurality of patterns a first resource can take.
    その3階層に対する単位処理において、テーブル定義モジュール110は、下位リソースデータ10を参照し、第1リソースがとり得る複数のパターンを示すテーブルフレームT10を作成する。 - 特許庁
  • Each unit among a plurality of image processing units having a pipeline structure receives an updated configuration vector, and the configuration vector is only applied in synchronization with a timing-derived trigger signal within a time period.
    パイプライン構造の複数のイメージプロセッシングの各ユニットは、アップデートされた構成ベクトルを受信し、該構成ベクトルは、時間周期以内にタイミング派生したトリガー信号と同期してのみ適用される。 - 特許庁
  • The GPU 115 draws an image defined by combining the unit graphics on a graphic memory 118 by performing rendering processing according to the graphic data supplied from the PPP 120.
    GPU115では、PPP120から供給される図形データにしたがってレンダリング処理が行われることにより、単位図形の組合せにより定義される画像が、グラフィックメモリ118に描画される。 - 特許庁
  • Each of the decoding processors 2(0) to 2(N-1) performs decoding processing on the macro block unit basis, supplies resultant pixel data to a frame memory 5 and restores original image data for one screen before data compression.
    復号処理プロセッサ2(0)〜2(N−1)のそれぞれは、マクロブロック単位に復号処理を行い、得られた画素データをフレームメモリ5に供給し、データ圧縮前の元の1画面分の画像データを復元する。 - 特許庁
  • A transmission quality monitoring unit 32 provided in a baseband signal processing circuit 30 of each of devices monitors an error of reception data or a response from an opposite party device to transmission data and measures an error rate.
    各装置のベースバンド信号処理回路30内に設けられた伝送品質監視部32によって、受信データの誤りや送信データに対する相手装置からの応答を監視し、エラー率を測定する。 - 特許庁
  • A two-dimensional pixel type detector 12 transmits a large data amount of two-dimensional diffraction data output from a plurality of pixels to the signal processing unit 21 via a camera link cable 24 of a high speed communication line.
    2次元ピクセル型検出器12は複数のピクセルから出力されるデータ量の大きな2次元回折線データを高速通信線であるカメラリンクケーブル24を通して信号処理部21へ伝送する。 - 特許庁
  • To provide an auction goods delivery method for easily delivering an auction goods awarded in a net auction from a seller to a buyer at a low cost, and a central processing unit for receiving orders of corrugated boxes.
    ネットオークションで落札された競売品を売り手から買い手に容易にかつ安価に届けることが可能な競売品配達方法及びダンボール箱受注用中央処理装置を提供する。 - 特許庁
  • To provide an audio data management system, information processing system, audio data management method, and audio data management program which enable a user to understand difference of audio data stored in each unit.
    利用者が各装置に保持されたオーディオデータの差分を迅速に把握することを可能とした「オーディオデータ管理装置、情報処理システム、オーディオデータ管理方法及びオーディオデータ管理プログラム」を提供する。 - 特許庁
  • To decrease the number of inverters to be loaded without lowering the rice cooking processing capability of an induction heating rice cooking unit and rice cooking equipment using it by efficiently using the loaded inverters.
    搭載するインバータを効率的に使用し、誘導加熱式炊飯ユニット及びそれを使用した炊飯設備の炊飯処理能力を低下させることなく、搭載するインバータの台数を削減する。 - 特許庁
  • To automatically attain optimum direct signal processing to the connection between an imaging unit and an external processor of different types to eliminate operation mistakes and complicated operations by an operator.
    異なるタイプの撮像装置と外部処理装置の接続に対して、自動的に最適なダイレクト信号処理を可能とすることによって、操作者による操作ミスや、操作の煩雑さを解消する。 - 特許庁
  • An HDD unit 20 attachable and detachable to/from an information processor includes a memory that stores user information for user authentication inside and a CPU for using the user information to perform authentication processing.
    情報処理装置への着脱が可能なHDDユニット20は、内部にユーザ認証のための使用者情報を記憶するメモリと、この使用者情報を用いて認証処理を行なうCPUを含む。 - 特許庁
  • To provide a clock frequency control method and a computer program that can appropriately change the clock frequency of a processing unit in accordance with the number, scale or computational complexity of application programs executed.
    実行するアプリケーションプログラムの数、規模又は演算量等に応じて、処理装置のクロック周波数を適切に変更することができるクロック周波数制御方法及びコンピュータプログラムの提供。 - 特許庁
  • Of each module and each unit, regarding modules/units that do not affect each other even if the processing of calibration-diagnosis are performed simultaneously, the sequence is set so that the calibration-diagnosis are executed in parallel.
    また、各モジュール/ユニットのうち、同時に校正・診断の処理を行っても互いに影響が無いモジュール/ユニット同士については、校正・診断を並列に実行するように順序を設定する。 - 特許庁
  • When the debug enable signal is inactive, an access signal from the debugger 100 to the semiconductor device 10 is invalid, and the security circuit 30 permits the access of the central processing unit to the memory 20.
    デバッグイネーブル信号がインアクティブのとき、デバッガ100から半導体装置10へのアクセス信号を無効にし、セキュリティ回路30が中央演算処理装置のメモリ20へのアクセスを許可する。 - 特許庁
  • A CPU provided with the plural stages of the power saving mode is used for the central processing unit and the optimum power saving mode is selected corresponding to the interval of the request timing of timeout interruption or the like.
    中央処理装置として複数段の省電力モードを備えるものを用いるとともに、タイムアウト割込みの要求タイミングの間隔などに応じて最適な省電力モードを選択するものである。 - 特許庁
  • To securely reduce power consumption when there is designated a selective readout mode, in which readout processing is performed selectively, at the stage of reading out a signal from a unit signal generator to the outside.
    単位信号生成部から信号を外部に読み出す段階で選択的な読出処理を行なう選択読出モードが指定されたときに、消費電力の低減を確実に図ることのできるようにする。 - 特許庁
  • When a predetermined time has passed by measuring the receiving duration by the timer 8, the signal processing unit 9 terminates storing received signals and detects a response signal in the stored received signals.
    タイマー8が受信継続時間を計測して、その所定の時間が経過すると、信号処理部9は受信信号の蓄積を終了し、その蓄積された受信信号から応答信号を検出する。 - 特許庁
  • To provide a dividing apparatus for an electronic component substrate capable of easily and efficiently dividing an electronic component substrate which mounts a plurality of small electronic components measuring a few millimeters unit per side, along a dividing processing groove.
    1辺数ミリ単位の小型の電子部品を複数実装した電子部品基板を分割加工溝に沿って容易かつ効率良く分割することのできる、電子部品基板の分割装置を提供する。 - 特許庁
  • An audio signal processing unit 3 acquires the playback volume value of audio data of a frame of interest, and generates multiplied audio data by multiplying the audio data of the frame of interest by the playback volume value.
    オーディオ信号処理部3は、着目フレームのオーディオデータの再生ボリューム値を取得し、着目フレームのオーディオデータに対して再生ボリューム値を乗算することで乗算後オーディオデータを生成する。 - 特許庁
  • An information processing unit 401 of the server 400 informs inspection required components and inspection required items which correspond to the incident from a diagnosis database 402 to the integrated management server 300 and an inspection terminal at a plant site 200.
    サーバ400の情報処理部401は診断データベース402から事象に対応する要点検部品、要点検項目を統合管理サーバ300及び機場200の点検端末に通知する。 - 特許庁
  • A coefficient processing unit 3 statistically calculates a symbol point error for each piece of symbol data stored over the fixed time, and calculates an optimum equalizer filter coefficient for minimizing the symbol point error.
    係数処理部3は、一定時間に亘って蓄積されたシンボルデータごとにシンボル点誤差を統計的に算出し、そのシンボル点誤差が最小となるような最適等化器フィルタ係数を算出する。 - 特許庁
  • A demodulation unit (11) detects a TMCC signal contained in an input signal by implementing predetermined demodulation processing on the input signal modulated by an orthogonal frequency division multiplexing system.
    復調部(11)は、直交周波数分割多重方式で変調された入力信号に対して所定の復調処理を実施することで、入力信号に含まれるTMCC信号を検出する。 - 特許庁
  • A baseband processing unit 22 and other units transmit the control packet signal and then transmit the investigatory packet signals, and receive packet signals containing investigatory results from the plurality of respective terminal apparatuses.
    ベースバンド処理部22等は、制御用のパケット信号を送信した後に、調査用のパケット信号を送信し、複数の端末装置のそれぞれから調査結果が含まれたパケット信号を受信する。 - 特許庁
  • The image processing unit 13 uses the correlation between the translation speed and angle variation to estimate angle variation of the frame image from the detected global motion vector GMV.
    本発明の画像処理部113は、並進速度及び角度変化の相関関係を利用することにより、検出されたグローバル動きベクトルGMVから、フレーム画像の角度変化を推定するようにする。 - 特許庁
<前へ 1 2 .... 284 285 286 287 288 289 290 291 292 .... 371 372 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.