「reference range」を含む例文一覧(1573)

<前へ 1 2 3 4 5 6 7 8 9 10 11 .... 31 32 次へ>
  • Time (reference time) added with the correction time to photographing time of an image reproduced in a step S401 and a retrieval time range with reference to the reference time are transmitted to the transfer source camera (step S404).
    ステップS401において再生された画像の撮影時刻に補正時間を加えた時刻(基準時間)及びこの基準時間を基準とした検索の時間範囲を、転送元カメラに送信する(ステップS404)。 - 特許庁
  • Time (reference time) obtained by adding the correction time to photographing time of an image reproduced in a step S401 and a retrieval time range with the reference time as reference are transmitted to the transfer source camera (step S404).
    ステップS401において再生された画像の撮影時刻に補正時間を加えた時刻(基準時間)及びこの基準時間を基準とした検索の時間範囲を、転送元カメラに送信する(ステップS404)。 - 特許庁
  • (1) A reference sensor and an objective sensor whose measurement scale is to be corrected are operated synchronously, and a reference value by the reference sensor and a raw measurement value by the objective sensor are acquired every measurement point in the whole measurement range.
    (1)基準センサおよび計測スケールの補正を行うべき対象センサを同期して動作させ、全計測範囲について、計測ポイント毎に基準センサによる基準値および対象センサによる生計測値を取得する。 - 特許庁
  • In this case, on the basis of the degree of deviation of a correspondent infinite-point with the horizontal position of the reference pixel area as a reference, the said address generating circuit 10 corrects the position of the search range related to the relevant reference pixel area.
    ここで、上記のアドレス生成回路10は、基準画素領域の水平位置を基準とした無限遠対応点のずれの程度に基づいて、当該基準画素領域に関する探索範囲の位置を補正する。 - 特許庁
  • A compiler 1 translates a source code 2 to generate a rearrangeable object 4, and generates a wide range variable reference information file 3 based on a memory reference instruction size table 9.
    コンパイラ1は、ソースコード2を翻訳し再配置可能オブジェクト4を生成し、メモリ参照命令サイズテーブル9に基づき広域変数参照情報ファイル3を生成する。 - 特許庁
  • A reference value of the carbon monoxide concentration is set to a range of 10 to 100 ppm, a value of the reference value or less is maintained by the analyzer 11, and operated.
    一酸化炭素濃度の基準値を10ppm以上100ppm以下の範囲内に設定し、分析計11により基準値以下の値を維持して運転する。 - 特許庁
  • When a reference color which is to be used in preparing an object is specified, only the range of sunset 202 being selectable colors with respect to the reference color is displayed on a color palette CP.
    オブジェクトの作成に使用される基準色を指定すると、その基準色に対する選択可能色のサブセット202の範囲だけがカラーパレットCPに表示される。 - 特許庁
  • Further, the sensor element is put between at least two reference element D3 and D3', and the reference element is used for testing whether the intensity of radiation is within an allowable range or not.
    さらに、センサ要素は少なくとも2つの基準要素D3、D3’で挟まれ、基準要素は放射線の強度が許容範囲内か否かのテストに使用される。 - 特許庁
  • A movable range finder 15, an altimeter 16 and an accelerometer 13 are attached to a manual truck equipped with reference wheels on both ends of a frame part 11 having the first reference length L.
    第一基準長Lの枠部11の両端に基準車輪を装備した手動の台車に、移動距離計15と高さ計16と加速度計13を付設する。 - 特許庁
  • The moving speed of the white reference board 51 is slower than a moving speed of the running body and the moving range of the white reference board 51 is decreased to provide a margin to the configuration of the machine of the image reader.
    走行体の動く速度に対して白基準板51の動く速度を遅くし、白基準板51の動く範囲を小さくして、機械の構成に余裕を持たせる。 - 特許庁
  • The number of unit pulses per unit time is compared with the number of reference pulses stored in a storage means 42 for monitoring that the number of unit pulses is changed out of the range of the number of reference pulses.
    単位時間あたりの単位パルス数と記憶手段42に記憶された基準パルス数とを比較し、単位パルス数が基準パルス数の範囲外に変化するか監視する。 - 特許庁
  • The reference voltage control circuit 17 controls the range of a reference voltage of the A/D conversion circuit 12 depending on the stage of the conversion by the analog to digital converter 100.
    リファレンス電圧制御回路17は、AD変換器100における変換の段階に応じてAD変換回路12のリファレンス電圧のレンジを制御する。 - 特許庁
  • A reference voltage control circuit 17 can be designed to control the circuit 12 so that the reference voltage range of the circuit 12 may be 1/2 for each cycle.
    リファレンス電圧制御回路17は、1周回毎に、AD変換回路12の基準電圧レンジが1/2になるように制御するといった設計も可能である。 - 特許庁
  • A singing frequency is compared with a reference frequency and when the singing frequency enters a specified range from the reference frequency, singing timing of the note is decided.
    リファレンス周波数と歌唱周波数とを比較し、歌唱周波数がリファレンス周波数から所定範囲内に入ったとき、その音符の歌唱タイミングであるとする。 - 特許庁
  • A comparator 11 compares the reference signals with the analog signals Ain, and when it is found that a difference between the reference signal and the analog signal Ain stays out of a predetermined range, output signals are made active.
    コンパレータ11は、その基準信号とアナログ信号Ainを比較し、それらの間の差分が予め定めた範囲でない場合に、出力信号をアクティブにする。 - 特許庁
  • A reference point S_0 to be white at an input color temperature is determined, and an elliptic white balance allowable range with the reference point S_0 as a center of B-G, R-G planes is set.
    入力された色温度において白となる基準点S_0を決定し、基準点S_0をB-G,R-G平面の中心とする楕円形状のホワイトバランス許容範囲を設定する。 - 特許庁
  • A judgement reference for the display of the reliability and the judgement reference for whether or not to perform the focusing corresponding to the range finding result are separately provided and the display and the focusing are performed.
    信頼性の表示のための判断基準と、測距結果に応じたピント合わせを行なわせるか否かの判断基準を別々に持たせ、表示とピント合わせを行なう。 - 特許庁
  • For introducing the substrate for manufacturing printed wiring board 1 into the reference hole working machine 3 and forming the reference hole 2 being the reference of the formation position of the through hole, the temperature of the board 1 is kept in the range of room temperature ±5°C and the reference hole 2 is formed.
    プリント配線板製造用の基板1を基準孔加工機3に導入してスルーホールの形成位置の基準となる基準孔2を形成するにあたり、基板1の温度を室温±5℃の範囲に保持した状態で基準孔2の形成を行う。 - 特許庁
  • An arithmetic processing part for detecting the position of a reference block highly correlated to the target block while moving the reference block within the search range and detecting the motion vector for each search range on the basis of the detected result is provided.
    当該サーチ範囲内を、参照ブロックを移動させながらターゲットブロックと相関の強い参照ブロック位置を検出し、その検出結果に基づいて、各サーチ範囲についての動きベクトルを検出する演算処理部を備える。 - 特許庁
  • Where the numerical range disclosed in the reference document and the numerical range of the above-defined technical feature partially overlap with each other or have at least a common end point, the reference document deprives the claimed invention or utility model of novelty.
    対比文献で開示した数値範囲が、前述の限定された技術的特徴の数値範囲の一部と重なっているか、若しくは、共通した端点がある場合、保護を請求する発明又は実用新案の新規性を損ねる。 - 特許庁
  • Where the numerical range disclosed in the reference document and the numerical range of the above-defined technical feature partially overlap with each other or have at least a common end point, the reference document deprives the claimed invention or utility model of novelty.
    対比文献で開示した数値範囲が、前述の限定された技術的特徴の数値範囲の一部と重なっているか、若しくは、共通した端点がある場合、請求項に係る発明又は実用新案の新規性を損ねる。 - 特許庁
  • A pixel value of a pixel EB of the inspected image and a pixel value range of the reference pixel EA corresponding to the inspected image are compared and it is judged that image details of the inspected images are conformed with the reference image if a difference between them is within the pixel value range.
    被検査画像の画素EBの画素値と、それに対応する参照画素EAの画素値範囲とが比較され、上記画素値範囲内の値であれば参照画像と画像内容が一致する画素であると判定する。 - 特許庁
  • The upper limit voltage VH of a voltage range where low-order bit conversion is performed is amplified by a second differential amplifier AMP2 with a center value voltage VM in the voltage range as a reference and becomes the high level reference voltage SUBH of a low-order bit conversion.
    下位ビット変換を行う電圧範囲の上限電圧V_H は第2の差動増幅器AMP_2 によって前記電圧範囲の中央値電圧V_M を基準に増幅され、下位ビット変換の高レベル基準電圧SUB_H となる。 - 特許庁
  • A sound valid range setting section 160 sets a sound valid range by using, as a reference position, the time when pressing manupilation of a video recording button is performed during the golf swing or the time when a timer counter indicates "0".
    音有効範囲設定部160は、そのゴルフスイング時における録画ボタンの押下操作時またはタイマカウンタ「0」時を基準位置として音有効範囲を設定する。 - 特許庁
  • Then, a specific range determining part 562 calculates the specific color range by using corrected values after correcting the readings in the reference chart 23 using the corrected parameters.
    そして、特定範囲決定部562は、基準チャート23の前記読取値を前記補正パラメータにより補正した後の補正値を用いて、上記特定色範囲を算出する。 - 特許庁
  • A use duty range (range from D3 to D4) is determined with setting the OCV center, or the upper end value D2 and the lower end value D1 of the dead band as reference.
    このOCV中心、或いは、不感帯の上端値D2及び下端値D1を基準にして使用デューティ域(D3からD4までの範囲)を決定する。 - 特許庁
  • A scanning means 14 scans the retrieval range of a reference image set by the retrieval range setting means 12 in the order set by the retrieval sequence setting means 13.
    走査手段14は、探索範囲設定手段12で設定された参照画像の探索範囲内を探索順序設定手段13で設定された順に走査する。 - 特許庁
  • The image processing section generates a second image, showing the range that can be reached from the reference point within a prescribed range, from the first image generated by the image generation section.
    画像処理部は、画像生成部によって生成された第1画像から、基準点から所定の時間以内に到達可能な範囲を示す第2画像を生成する。 - 特許庁
  • An effective-range storage means 42 stores a prescribed effective range to be set, in such a way that it is included at the inside with reference to an estimated coordinate value of the edge to be detected.
    有効範囲記憶手段42は、検出しようとするエッジの予測座標値に対してこれを内部に含むように設定された所定の有効範囲を記憶する。 - 特許庁
  • The visual field from a viewpoint 100 in a virtual space is divided into a close-range view region 130 and a distant-range view region 132 with reference to a self character 102 (a).
    仮想空間における視点100に基づく視界を、自キャラクタ102を基準として近景領域130と遠景領域132とに分割する(a)。 - 特許庁
  • An operation determination part 17 determines whether the indication portion in the operation (input) part 9 is slide-input continuously in a range of a prescribed reference slide range or more, or not.
    操作判別部17は、操作部9における指示箇所が所定の基準スライド範囲以上の範囲で連続してスライド入力されたか否か判別する。 - 特許庁
  • Reference image signals in the searching range are read from the cache memory 100 and written in a reference image buffer 407 to be used for searching the motion vector, and the reference image signals of blocks at positions ahead by the prescribed number of blocks in a raster order from the center block of a searching range are read from a reference image frame memory 405 and written in the cache memory 100.
    キャッシュメモリ100から探索範囲の参照画像信号を読み出して参照画像バッファ407に書き込み、動きベクトル探索に供すると共に、探索範囲の中心ブロックからラスタ順で所定のブロック数だけ先行した位置のブロックの参照画像信号を参照画像フレームメモリ405から読み出してキャッシュメモリ100に書き込む。 - 特許庁
  • A space assignment control part 12 calculates a first reference position in the file identifier space by applying a predetermined hash function to the address of its own node, and calculates a second reference position from the address of the adjacent node, and decides a sharing range in the range from the first reference position to the second reference position based on the relative space width.
    空間割当制御部12は、自ノードのアドレスに所定のハッシュ関数を適用して、ファイル識別子空間における第1の基準位置を求め、同様に、隣接ノードのアドレスから第2の基準位置を求める、相対的な空間幅に基づいて、第1の基準位置から第2の基準位置までの範囲内について分担する分担範囲を決定する。 - 特許庁
  • The operation range of an operation mechanism 35 including an actuation member 40 connected to an accelerator pedal 21 can be changed from a reference operation range by an operation range regulation mechanism 50 in accordance with the running environment of a vehicle 1.
    アクセルペダル21が接続される作動部材40等の操作機構35の操作範囲を、操作範囲規制機構50によって車両1の走行環境に応じて基準操作範囲から変更可能に設けている。 - 特許庁
  • A range where such pixels as the CPU 130 judged that the quantity of light reflected on the reference white board 104 is not the effective quantity of light are arranged is recognized as a range (contaminant range) where contaminants are adhering.
    基準白色板104による反射光の光量が有効な光量でないとCPU130が判定した画素が並ぶ範囲を、CPU130は異物が付着している範囲(異物範囲)として認識する。 - 特許庁
  • To greatly enhance the yield of manufacture, by relieving a voltage generating circuit which generates reference voltage beyond a trimming range.
    トリミング範囲を超えた基準電圧を生成する電圧発生回路を救済し、製造歩留まりを大幅に向上する。 - 特許庁
  • To provide a driving circuit in which a bias voltage is held without using a reference circuit and a driving voltage range is wide.
    レファレンス回路を用いることなくバイアス電圧を保持しかつ駆動電圧範囲の広い駆動回路を提供する。 - 特許庁
  • Then, the pump 60 is driven until condensation is eliminated and the detected reference pressure Pref reaches the normal range P1.
    そして、結露が解消され検出する基準圧Prefが正常範囲P1に達するまでポンプ60を駆動する。 - 特許庁
  • According to a user operation, a mouse cursor is moved on the display area, and a reference of a changed display range is set.
    ユーザの操作にしたがって、表示領域上でマウスカーソルを移動し、変更後の表示範囲の基準を設定する。 - 特許庁
  • A corresponding reference frequency is set small as the failure determining temperature area separates from the working temperature range.
    故障判定温度領域が使用温度範囲から離れているほど対応する基準回数が少なく設定されている。 - 特許庁
  • Abnormality in number of piled corrugated cardboard is detected by determining if a measured value is within a predetermined range from the reference value.
    測定値が、基準値から所定の範囲内であるか否かを判定して、積み重ね枚数異常を検出する。 - 特許庁
  • When there is no cutting block within the range of the allowable value, the reference block is worked by one set of spindle.
    許容値の範囲以内である切削ブロックが存在しない場合は、1基のスピンドルで基準の切削ブロックを加工する。 - 特許庁
  • After the reference steering angle neutral point is updated and stored, the reduction range of the assist torque is returned to a vicinity of the stroke end position.
    基準舵角中立点を更新記憶した後は、アシストトルクの低減領域をストロークエンド位置近傍に戻す。 - 特許庁
  • When the reference voltage is fluctuated within the threshold range, the CPU 113 restricts the upper limit of the steering assistant torque.
    また、基準電圧が閾値の範囲内で変動した場合には、CPU113は操舵アシストトルクの上限を制限する。 - 特許庁
  • The potentiostat monitors the electric potential of the counter electrode 3 and generates a malfunction signal when the potential comes to lie outside a specified reference range.
    対極3の電位を監視し、電位が特定の基準範囲外にある場合には誤作動信号を生成する。 - 特許庁
  • The reference distance is able to be set within a prescribed range Rgl including a point Dref where a computed result gets zero.
    その演算結果がゼロとなる点Drefを含む所定範囲Rgl内で基準距離の設定が可能である。 - 特許庁
  • The small-sized and inexpensive range finder easy to recognize the irradiation direction serving as a reference is realized by a simple mechanism, by this manner.
    こうして、単純な機構で基準となる照射方向の認識が容易で、小型、安価な装置を実現できる。 - 特許庁
  • An angle θ (=180°+ an offset angle) between adjacent two printing reference faces A is set to be in the range of 181°-183°.
    隣接する2個の印字基準面Aのなす角θ(=180度+オフセット角)を181〜183度に設定する。 - 特許庁
  • Whether the difference between the brightness average and the reference value is substantially within a range of tolerance or not is judged.
    そして、輝度平均値と参照値との差が実質的に許容できる差となる許容差の範囲内にあるか判断する。 - 特許庁
  • A reference value used for the comparison collation is calculated, based on the limited frequency range of the observed spectrum data.
    比較照合に用いられる基準値は、実測スペクトルデータの限定した周波数範囲に基づいて算出される。 - 特許庁
<前へ 1 2 3 4 5 6 7 8 9 10 11 .... 31 32 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.
  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.