「suitable method」を含む例文一覧(8886)

<前へ 1 2 .... 90 91 92 93 94 95 96 97 98 .... 177 178 次へ>
  • Since it is unnecessary to form the negative film, the alteration/correction of a printed image before exposure is simple and the plate making method suitable for small lot printing and on-demand printing can be realized.
    また、ネガフィルムを作成する必要がないので、露光前における印刷画像の変更、修正が簡単であり、小ロット印刷、オンデマンド印刷に適した製版方法を実現できる。 - 特許庁
  • To provide a method for beauty care, enabling a proper facial massage suitable for properties of the skin and requirement of a treated person to be readily and effectively applied by a person even if the person is not an expert.
    被施術者の肌性や要望に合った適切なフェイシャルマッサージを熟練者でなくても容易かつ効果的に行うことを可能とする美容方法を提供する。 - 特許庁
  • To provide a high precision delay measurement equal to or less than the unit of milliseconds suitable for a measuring method or the like to which high precision is required for measuring delay time in a distributed computer network environment or the like.
    分散した計算機ネットワーク環境下などの高精度が要求される遅延時間の測定方法などに適するミリ秒単位以下の高精度な遅延測定を提供する。 - 特許庁
  • To provide the suitable surface treatment method of a circuit board, which is applied to the case of a mounting pad necessary for the control of the flow rate of solder at mounting of solder on a circuit.
    回路部品の半田実装の際に半田の流れ量を制御する必要がある実装パッド等の場合に適用して好適な回路基板の表面処理法を提供する。 - 特許庁
  • To provide a method for discriminating the therapy resistance of a cancer cell, useful for the therapy of cancer and the characterization of a cancer experimental model, capable of elucidating a factor of the therapy resistance of the cancer cell, and suitable for the practice.
    癌治療や癌実験モデルのキャラクタリゼーションに有用な、癌細胞の治療抵抗性の因子を解明し、実際に適合した癌の治療抵抗性の鑑別法を提供する。 - 特許庁
  • To provide a method for manufacturing an optical fiber assembly which is suitable for manufacturing an optical fiber assembly with a cross sectional area of 1 cm^2 or more, and can suppress generation of air bubbles inside of the optical fiber assembly.
    断面積1cm^2以上の光ファイバ集合体の製造に好適な、内部の気泡の発生を抑制できる光ファイバ集合体の製造方法を提供する。 - 特許庁
  • To provide a sound-absorbing laminate having a high sound absorbing property in an approximately middle wavelength range, having a thin thickness and a light weight, excellent in form stability and suitable for an automobile interior, and a method for producing the same.
    中程度の領域周波数の吸音性が高く、薄く、軽量で、形態安定性に優れ、自動車内装用などに好適な吸音材およびその製造法を提供する。 - 特許庁
  • To provide a method for manufacturing a crystal silicon solar cell having a reverse side insulation layer composed of an organic material by using a fabrication process which is suitable for mass production and less likely to have adverse effects.
    有機材料からなる裏面絶縁層を有する結晶シリコン太陽電池を、量産に適した悪影響の少ない工程により作製するための作製方法を提供する。 - 特許庁
  • To provide a device and a method for video signal editing which automatically adds the most suitable music to video according to a simple indication without requiring any special editing technique.
    特別な編集技術を要求することなく、簡単な指示に基づいて、映像に最適な音楽を自動的に付加する映像信号編集装置および方法を提供する。 - 特許庁
  • To provide a method for determining succeeding cropping plants by which a plant suitable for succeeding cropping of a plant having possibility to release an allelopathic substance can simply be selected in a short period.
    アレロパシー物質を放出する可能性のある植物の後作に適した植物を、短期間で簡易に選定することのできる後作植物判定方法を提供すること。 - 特許庁
  • To provide a method for manufacturing a reliable, high-definition and large-area organic EL display element by providing a color filter suitable to be laminated to the organic EL display element.
    有機EL素子との貼り合わせに好適なカラーフィルタを提供し、それにより信頼性に優れた高精彩・大面積の有機EL表示素子の製造方法を提供する。 - 特許庁
  • To provide a surface-treated metal with superior corrosion resistance suitable for practical use without using a coating agent such as a resin, and to provide a chemical conversion treatment method.
    樹脂などのコーティング剤を用いることなく、実用的な意味での良好な耐食性を有する表面処理金属及び化成処理方法を提供することを課題とする。 - 特許庁
  • To provide a method of suppressing/controlling vibration of a pneumatic vibration elimination base system suitable for rapidly suppressing vibration of large displacement, for instance, vibration at a level of several millimeters by active control.
    大変位の振動、例えば数mmレベルの振動をアクティブ制御により迅速に抑制するのに適した空圧式除振台システムの振動抑制制御方法を提案すること。 - 特許庁
  • To provide an image forming apparatus and an image forming method, whereby suitable printing is carried out depending on contents of two-dimensional codes in order to prevent reduced printing whose reading is disabled or the like.
    読み取りが不可能な縮小印刷を防止するなど、二次元コードの内容に応じて好適な印刷を行うことができる画像形成装置及び画像形成方法を提供する。 - 特許庁
  • To provide a method for producing a finely porous membrane, by which the finely porous membrane having a pore diameter suitable for separating and purifying nucleic acid can be produced in a saved space, and to provide an apparatus for producing the same.
    省スペースで製造することが可能であり、核酸の分離精製に適した孔径に製造することができる微細多孔質膜の製造方法及び装置を提供する。 - 特許庁
  • To provide an order agent method and an order agent system efficient for a customer and capable of surely placing an order suitable for store's own system.
    顧客にとって効率的であり、商店にとっても自身のシステムに適した受注を確実に行うことができる発注代行方法及び発注代行システムを提供する。 - 特許庁
  • To provide a method for production of a rare earth vanadate single crystal which has no crystal defect, has high quality, is large-sized platy and is suitable for use in a semiconductor laser-excited solid-state laser.
    結晶欠陥がなく、高品質かつ大型の板状であり、半導体レーザ励起固体レーザ用途等に好適な希土類バナデイト単結晶を製造する方法を提供する。 - 特許庁
  • To provide an information terminal device and an information sharing method suitable to the sharing of contents, in which the contents can be propagated widely considering the point for the survival time of the contents at a delivery destination.
    送信先でのコンテンツの生存時間に関する点を考慮し、コンテンツが広く伝搬し、コンテンツ共有に適した情報端末装置及び情報共有方法を提供する。 - 特許庁
  • To provide a metal particle suitable for forming a thin layer internal electrode of a laminated ceramic capacitor, a method for producing the same, and a metal vapor deposition film for use in the production.
    積層セラミックコンデンサの薄層内部電極を形成するに好適な金属粒子、およびその製造方法ならびに製造に使用する金属蒸着フィルムを提供する。 - 特許庁
  • To provide a ceiling structure and an execution method for a ceiling, which facilitate the execution of work for mounting a ceiling material and are suitable for ceiling work for a small room such as a lavatory.
    天井材を取り付ける施工が容易で、例えば、手洗所などの狭い部屋の天井工事に好適な、天井の構造、および天井の施工方法を提供すること。 - 特許庁
  • To provide a processing condition selecting apparatus, a processing condition selecting method, and a program for enabling even an operator who is unfamiliar with processing characteristics to select a halftone process suitable for a print.
    処理特性を熟知しない作業者であっても、印刷物に適したハーフトーン処理を選択可能な処理条件選択装置、処理条件選択方法及びプログラムを提供する。 - 特許庁
  • To provide a thermoplastic resin film which has a small thermal shrinkage rate in a film-forming direction and small dimensional change and is suitable as a material for electronics or the like, and to provide a method for producing the same.
    フィルム成形方向の熱収縮率と寸法変化が小さく、エレクトロニクス用部材等として好適な熱可塑性樹脂フィルム及びその製造方法を提供すること。 - 特許庁
  • To provide a modified polyethylene terephthalate capable of being molded in high productivity to provide a hollow container suitable for the application for filling a liquid such as a drink, and further to provide a method for producing the modified polyethylene terephthalate.
    飲料などの液体を充填する用途に好適な中空成形容器を高い生産性で成形可能な改質ポリエチレンテレフタレートおよびその製造方法を提供すること。 - 特許庁
  • To provide a method for manufacturing a substrate for a mask blank suitable as a substrate for a reflective mask blank which is requested to have defect quality of extremely high level by decreasing the number of projection-shaped defects.
    凸状欠陥数を低減させ、非常に高いレベルの欠陥品質を要求される反射型マスクブランク用基板として好適なマスクブランク用基板の製造方法を提供する。 - 特許庁
  • To provide an image correction apparatus and method and image processing program in which image correction can be carried out at a high processing speed suitable for motion pictures while simplifying a resource such as a memory.
    メモリなどのリソースを簡素化しつつ、動画に適した高い処理速度で画像補正を実行することが可能な画像補正装置及び方法並びに画像処理プログラムを提供する。 - 特許庁
  • To provide a producing method suitable for producing golf balls which have a high rebound and excellent spin characteristics and scuff resistance, are recyclable in a molding operation and have excellent manufacturability.
    反発性が高く、スピン性能、耐擦過傷性に優れ、リサイクル成形が可能であり、生産性にも優れたゴルフボールを製造するのに適した製造方法を提供することにある。 - 特許庁
  • To provide an encoding method of information modulation code being suitable for data detection having both of simplicity almost same as that of sort detection and performance almost same as that of correlation detection.
    ソート検出とほとんど同じ簡便さと、相関検出とほとんど同じ性能を兼ね備えるデータ検出に適している情報変調符号の符号化方法を提案する。 - 特許庁
  • This method does not measure electric signals but directly measures dynamic motion of a heart and selects the most suitable position so as to make an image artifact minimum using projection data.
    本方法は、電気信号ではなく心臓の力学動作を直接計測しており、また投影データを用いて画像アーチファクトを最小にするような最適位置を選択している。 - 特許庁
  • To provide a conductive paste suitable for a through hole filling paste and also provide a circuit board together with its manufacturing method, wherein surface smoothness is assured without raising cost.
    スルーホール充填用のペーストとして好適な導電性ペースト、並びにコストアップを招くことなく表面平滑性を確保することのできる回路基板及びその製造方法を提供する。 - 特許庁
  • To provide a reliable semiconductor device which can suppress dishing in a pad region through a CMP step to realize suitable photolithography and etching step, and also to provide a method for manufacturing the semiconductor device.
    CMP工程を経るパッド領域におけるディッシングを抑制し、適正なフォトリソグラフィ及びエッチング工程が行える高信頼性の半導体装置及びその製造方法を提供する。 - 特許庁
  • To obtain a wireless IC device in which an electromagnetic coupling module and a radiation plate are easily assembled and which is superior in radiation properties and is suitable for a RFID (radio frequency identification system), and to provide its manufacturing method.
    電磁結合モジュールと放射板との組立てが容易で、放射特性が良好である、RFIDシステムに好適な無線ICデバイス及びその製造方法を得る。 - 特許庁
  • To provide a composite material suitable for a heat radiating member having an excellent heat conduction property, and also provide a method for manufacturing the composite material for manufacturing the composite material with favorable productivity.
    熱伝導性に優れて放熱部材に適した複合材料、及びこの複合材料を生産性よく製造することができる複合材料の製造方法を提供する。 - 特許庁
  • To provide a method of manufacturing a POF cable excellent in optical transmission characteristics and dimension stability even under the high temperature environment of about 100°C and suitable especially for mounting on a vehicle.
    100℃程度の高温環境下においても、光伝送特性並びに寸法安定性に優れ、特に車載用として好適なPOFケーブルの製造方法を提供する。 - 特許庁
  • To provide a method of an alumina cement which is wholly originated from industrial byproducts, and has characteristics not inferior to conventional material, and is particularly suitable for manufacturing an arbitrary form refractory.
    原材料を全て産業副生物とし、既存のものと比較して遜色ない特性を有し、特に、不定形耐火物の製造に適したアルミナセメントの製造方法を提供する。 - 特許庁
  • To provide a preprocessing method for recombination lifetime evaluation in which a suitable recombination lifetime is measured by suppressing a recombination process on a wafer surface of a low-contamination and long-lifetime silicon wafer.
    低汚染で高ライフタイムのシリコンウェーハにおいてウェーハ表面での再結合過程を抑制し、適切な再結合ライフタイムが測定できるような前処理方法を提供する。 - 特許庁
  • The present invention relates to an attenuated phase shift mask suitable for hyper NA lithographic processing of a device, to a method for making such a mask and to hyper NA lithographic processing using such a mask.
    本発明は、デバイスのハイパーNAリソグラフプロセスに適した減衰型の位相シフトマスクと、こうしたマスクを製作する方法と、そして、こうしたマスクを用いたハイパーNAリソグラフプロセスに関する。 - 特許庁
  • To provide an image processing unit, an image processing method, and an image processing program capable of presenting an image or the like suitable for use (for example, print order) in prescribed application to a user.
    所定の用途に使用(例えば、プリント注文)するのに適した画像等をユーザに提示することができる画像処理装置、画像処理方法及び画像処理プログラムを提供する。 - 特許庁
  • To provide a resist pattern formation method that can decrease the sensitivity dependence on the immersion time and acid solution discharged amount into immersion solution, and that is suitable for immersion exposure.
    レジスト感度の液浸時間依存性、および液浸液への酸溶出量を低減することが可能となる、液浸露光に好適なレジストパターン形成方法を提供することにある。 - 特許庁
  • To provide a nitride semiconductor lamination structure using group III nitride semiconductor that is suitable for application of power device or the like, together with its formation method, and to provide a nitride semiconductor element provided with a nitride semiconductor lamination structure part that is formed by the formation method, together with its manufacturing method.
    パワーデバイスなどへの適用に適したIII族窒化物半導体を用いた窒化物半導体積層構造およびその形成方法、ならびにこの形成方法により形成される窒化物半導体積層構造部を有する窒化物半導体素子およびその製造方法を提供すること。 - 特許庁
  • To provide a novel method for manufacturing a boride single crystal that has better crystallinity than that obtained with the prior art, by a floating zone method; and to provide a substrate that is made by the manufacturing method and is suitable for epitaxial growth of a semiconductor layer, particularly a GaN-based semiconductor layer.
    FZ法によって、現状よりも結晶性に優れたホウ化物単結晶を製造することができる新規な製造方法と、前記製造方法によって製造された、特に、GaN系半導体層等の半導体層をエピタキシャル成長させるのに適した基板とを提供する。 - 特許庁
  • The base material for measuring sugar chain molecules fixed to a base material is a base material for measuring sugar chain characterized by measuring the fixed sugar chain with a sugar chain dyeing method and a measuring method which is the sugar chain dyeing method where the periodic acid Schiff's reaction is suitable.
    基材上に固定化した糖鎖分子を測定する糖鎖測定用基材であって、固定化糖鎖を糖鎖染色法により測定することを特徴とする糖鎖測定用基材と、その測定方法であり、過ヨウ素酸シッフ反応が好適な糖鎖染色法である。 - 特許庁
  • To provide a formation method of a nitride semiconductor laminate structure using a group III nitride semiconductor suitable for application to a power device, or the like, and to provide a manufacturing method of a nitride semiconductor element having a nitride semiconductor laminate structure section formed by the formation method.
    パワーデバイスなどへの適用に適したIII族窒化物半導体を用いた窒化物半導体積層構造の形成方法、およびこの形成方法により形成される窒化物半導体積層構造部を有する窒化物半導体素子の製造方法を提供すること。 - 特許庁
  • To provide a method for precisely quantifying a hydrazone compound, which is obtained by allowing DNPH to act on an aldehyde or ketone compound, by an HPLC method and a gas absorbing cartridge for measuring the concentration of the aldehyde or ketone compound in the atmosphere suitable for executing an aldehyde or ketone compound measuring method.
    アルデヒド又はケトン化合物にDNPHを作用させて得られたヒドラゾン化合物を精度よくHPLC法により定量する方法、及びそのような測定方法を実施するのに適したアルデヒド又はケトン化合物の大気中濃度測定用ガス吸収カートリッジを提供すること。 - 特許庁
  • To provide a sapphire substrate for a semiconductor light emitting device that is a sapphire substrate formed with a concave portion in a principal plane thereof by an efficient method suitable for mass production, to provide its manufacturing method, and also to provide a semiconductor light emitting device manufactured using the sapphire substrate manufactured by this method.
    サファイア基板の主面に効率良く量産に適した方法で凹部を形成した半導体発光素子用サファイア基板およびその製造方法を提供し、また、同時にこの方法で作成されたサファイア基板を用いて作製された半導体発光素子を提供する。 - 特許庁
  • To provide a method of manufacturing a nitride group III-V semiconductor crystal suitable for growing a nitride group III-V semiconductor crystal on the top surface to which AlGaN of a substrate is exposed, and to provide a method of manufacturing the nitride group III-V semiconductor laser device using the method.
    基板のAlGaNが露出した最表面上にIII−V族窒化物半導体結晶を成長させるのに適したIII−V族窒化物半導体結晶の製造方法およびその方法を用いたIII−V族窒化物半導体レーザ素子の製造方法を提供する。 - 特許庁
  • To provide a suitable overlap degree measuring method to be used for delivery area division for surely measuring the overlap degree of a geographical delivery area and equalizing loads, and for reducing the total sum of distances between a seed and delivery destinations, and to provide a delivery area dividing method using the overlap degree measuring method.
    地理的な配送エリアの跨り度を確実に、測定出来て、しかも、負荷を平準化すると共に、シードと配送先との距離の総和を減少させる配送エリア分割に用いて好適な跨り度測定方法及び該跨り度測定方法を用いた配送エリア分割方法を提供する。 - 特許庁
  • To provide a manufacturing method of a semiconductor element with an epichannel structure which eliminates a limit of usable energy in an extremely low energy ion injecting method and which is suitable for improving a decrease in productivity in a extremely low energy ion injecting method which requires a process of a long period of time.
    極低エネルギーイオン注入法に伴う使用可能なエネルギーの限界を解消し、長時間の工程が要求される極低エネルギーイオン注入法の生産性低下を改善するのに好適のエピチャネル構造の半導体素子の製造方法を提供する。 - 特許庁
  • To provide a method for continuous surface modification of a polymer film whereby the surface modification of a long polymer film is efficiently and continuously carried out; to provide an apparatus for the continuous surface modification of the polymer film, which is suitable for carrying out the method; and to provide the long polymer film obtained by the method.
    長尺の高分子フィルムの表面改質を効率よく連続的に行う高分子フィルムの連続的表面改質方法、この方法の実施に好適な高分子フィルムの連続的表面改質装置、及び前記方法によって得られる長尺の高分子フィルムを提供する。 - 特許庁
  • To provide a composition of an organic acid metal salt containing a niobium precursor and a lead precursor suitable for a raw material for a MOD (Metal Organic Deposition) method when a thin film containing niobium and lead is manufactured by the MOD method; and a method for manufacturing the thin film using the same.
    本発明の目的は、ニオブと鉛を含有する薄膜をMOD法によって作製する際に、MOD法用原料に適するニオブプレカーサと鉛プレカーサを含有する有機酸金属塩組成物及び該組成物を用いた薄膜の製造方法を提供することにある。 - 特許庁
  • To provide a method of manufacturing an organic EL panel excellent in mass productivity in which a detailed pattern of the organic EL element can be formed by a simple method without using expensive equipment and at a low cost, and to provide a blanket for printing which is suitable for enforcement of the method of manufacturing the organic EL panel.
    有機EL素子の微細なパターンを、高価な設備を用いることなく簡易な方法で、しかも低コストで形成することのできる、量産性に優れた有機ELパネルの製造方法と、当該製造方法の実施に好適な印刷用ブランケットを提供する。 - 特許庁
<前へ 1 2 .... 90 91 92 93 94 95 96 97 98 .... 177 178 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.