「thinned」を含む例文一覧(2421)

<前へ 1 2 3 4 5 6 7 8 9 10 11 .... 48 49 次へ>
  • To provide an optical disk device having usability improved by preventing the useless repeating of thinned reproduction for a user by reproducing data thinned not to be reproduced in previous thinned reproduction when thinned reproduction is reexecuted.
    間引き再生をやり直すときには、前回の間引き再生で間引いて再生しなかったデータを再生することにより、ユーザにとって無駄な間引き再生が繰り返し行われるのを防止し、使い勝手を向上させた光ディスク装置を提供する。 - 特許庁
  • To quickly show thinned images from the images photographed.
    撮像画像の間引き画像を迅速に表示することができる。 - 特許庁
  • To provide a module and a substrate that can be thinned.
    薄くすることができるモジュール及び基板を提供すること。 - 特許庁
  • To manufacture a thinned and flattened RFID tag.
    薄型化および平坦化が図られたRFIDタグを製造する。 - 特許庁
  • STEEL SHEET FOR THINNED, DEEP DRAWN AND IRONED CAN, AND MANUFACTURING METHOD THEREFOR
    薄肉化深絞りしごき缶用鋼板およびその製造法 - 特許庁
  • THINNED STEEL SHEET FOR DEEP DRAWN AND IRONED CAN HAVING EXCELLENT WORKABILITY
    加工性に優れた薄肉化深絞りしごき缶用鋼板 - 特許庁
  • CORROSIVELY THINNED THICKNESS MEASURING AND INSPECTING DEVICE FOR STEEL PIPE, AND ITS USING METHOD
    鋼管腐食減肉測定検査装置とその使用方法 - 特許庁
  • Accordingly, the thickness of the strain mitigating film 2 can be thinned.
    したがって、歪み緩和膜2の厚さを薄くすることができる。 - 特許庁
  • DEVICE FOR GENERATING THINNED-OUT MASK PATTERN, RECORDING DEVICE EQUIPPED WITH THIS DEVICE FOR GENERATING THINNED-OUT MASK PATTERN, METHOD FOR GENERATING MASK PATTERN, PROGRAM AND STORAGE MEDIUM
    間引きマスクパターン生成装置及び当該生成装置を備えた記録装置、マスクパターンの生成方法、プログラム、記憶媒体 - 特許庁
  • PACKAGING BOX IN WHICH TOP PLATE AND/OR BOTTOM PLATE ARE COMPRESSED AND THINNED DOWN
    天板及び/又は底板を圧縮薄厚化した包装箱 - 特許庁
  • After error correction coding of data, the data is thinned and transmitted.
    データを誤り訂正符号化の後に、間引きして送信する。 - 特許庁
  • The wall thickness of the front wall 3 is thinned, to reduce its weight.
    前壁3の壁厚が薄くなり、その重量が軽くなる。 - 特許庁
  • Sufficient heat retaining effect can not be obtained on the thinned part, and the heat of the hot water storage tank 22 radiates from the thinned part.
    薄くなった部分は、十分な保温効果が得られず、この薄い部分から貯湯タンク22の熱が放熱してしまうこととなる。 - 特許庁
  • Information of the pixels to be thinned are saved in empty bits of pixel data.
    間引く画素の情報は、画素データの空きビットに保存する。 - 特許庁
  • As a result, the backlight device 100 can be thinned.
    この結果、バックライト装置100を薄型にすることができる。 - 特許庁
  • To provide a method of manufacturing a panel utilizing thinned wood, and the panel utilizing thinned wood manufactured by the method solving a problem of large deformation such as contraction and cracks of thinned wood to attain the effective use of thinned wood.
    間伐材がもつ収縮やひび割れ等変形が大きいといった問題点を解消し、有効に間伐材を利用することが可能となる間伐材利用パネルの製造方法及びその方法により製造される間伐材利用パネルの提供を図る。 - 特許庁
  • In reproducing the animation data thinned out and stored, a thinning-out information reproduction part 7 reproduces information about the thinned-out frame, a decoding part 8 decodes frames which are not thinned out, and then a frame interpolation processing part 9 interpolates the thinned-out frame.
    また、間引かれて記憶された動画像データの再生時には、間引き情報再生部7が間引かれたフレームに関する情報を再生し、復号化部8が間引かれなかったフレームを復号化した後、フレーム補間処理部9が間引かれたフレームを補間する。 - 特許庁
  • Thus, usability for the user is improved without any useless thinned reproduction where when the thinned reproduction is reexecuted, a position roughly similar to that of the previous time is reproduced, and thinned.
    したがって、間引き再生のやり直したときに、前回と略同じ位置が再生され、略同じ位置が間引かれる、無駄な間引き再生が行われることがなく、ユーザの使い勝手を向上できる。 - 特許庁
  • Thinned-out processing of the pulse signal is carried out by an electronic control device 50, and a crank angle is calculated based on the thinned-out processed signal.
    このパルス信号は電子制御装置50によって間引き処理され、間引き処理された信号に基づきクランク角が算出される。 - 特許庁
  • The sapphire substrate 11 is thinned by a plane polishing method, and a Si substrate 16 is bonded to a rear face of the thinned sapphire substrate 11.
    サファイア基板11を平面研磨法により薄膜化し、該薄膜化されたサファイア基板11の裏面にSi基板16を接合する。 - 特許庁
  • Using a train schedule database 3 and the thinning out condition database 7, a thinned out train service extractor 6 prepares a thinned out service candidate list 9.
    間引き列車抽出処理部6は、ダイヤDB3,間引き条件DBを利用して間引き列車候補リスト9を作成する。 - 特許庁
  • A fan filter unit 14 is disposed in the ceiling surface of the clean room in a thinned state, and a semi-closed plate 38 is disposed in the thinned section.
    クリーンルームの天井面にファンフィルタユニット14を間引きして配置するとともに、その間引き部分に半閉止板38を配置する。 - 特許庁
  • It can also keep sufficient insulation characteristics when thinned.
    また、薄膜化しても、十分な絶縁特性を維持することができる。 - 特許庁
  • To provide a uniaxial semiconductor acceleration sensor which can be thinned.
    薄型化を可能にする一軸半導体加速度センサを提供する。 - 特許庁
  • It is preferable that the thinned parts 6 be constituted by holes, notches or bottomed holes.
    肉抜部6は孔や切り欠き、有底穴などで構成するとよい。 - 特許庁
  • To prevent the warp of a multilayer wiring board which is thinned and highly densified.
    薄膜化、高密度化した多層配線基板の反りを防止する。 - 特許庁
  • The pyroligneous acid is characterized in that the pyroligneous acid is produced from thinned wood.
    また、木酢は間伐材から製造することを特徴とする。 - 特許庁
  • I tend to like a white... with the grit of a hummus... that's, of course, been thinned out.
    白もいいかもね... ハマスと一緒に... もちろん 薄めたやつでね - 映画・海外ドラマ英語字幕翻訳辞書
  • THINNED MATERIAL, ITS MANUFACTURING METHOD, AND ELECTRIC/ELECTRONIC PART USING IT
    薄葉材、その製造方法およびそれを用いた電気・電子部品 - 特許庁
  • With the consistent down-grade, washing oil entering into the thinned part a during washing flows along the slope of the thinned part surface ranging over the total radial length of the bearing, and then flows out of the thinned part a.
    常に下り勾配となっておれば、洗浄時に肉ぬすみa内に入り込んだ洗浄油は、その肉ぬすみ表面の軸受の径方向全長に亘る傾斜に沿って流れ、やがて、肉ぬすみaから流れ出る。 - 特許庁
  • Such elements are thinned due to the improved structure.
    そのような要素は構造が改良されているために薄くなっている。 - 特許庁
  • To appropriately perform focal point detection when performing thinned-out reading.
    間引き読み出しを行う場合に、焦点検出を適切に行うこと。 - 特許庁
  • To provide a receiving module which can be miniaturized/thinned.
    小型化/薄型化を図ることができる受信モジュールを提供すること。 - 特許庁
  • The guide ring 70 includes a thinned portion 73 formed in the radial direction.
    ガイドリング70には、半径方向に薄肉部73が形成されている。 - 特許庁
  • To reduce the occurrence of moire in a thinned-out image signal.
    間引き出力させた画像信号のモアレの発生を減小させる。 - 特許庁
  • To provide a thinned semiconductor device and a method of manufacturing the same.
    薄型化された半導体装置及びその製造方法を提供する。 - 特許庁
  • THINNED IC INLET, IC CARD USING THIS, AND ITS MANUFACTURING METHOD
    薄型化ICインレット及びこれを用いたICカードとその製造方法 - 特許庁
  • There is provided an antiglycation agent containing a thinned grape extract.
    本発明は、摘果ブドウ抽出物を含む抗糖化剤を提供する。 - 特許庁
  • Part of a communicating part between the replenishing pipe and developing device is thinned.
    補給パイプと現像器の間の連通部が、一部、細くなっている。 - 特許庁
  • The inter-layer insulating film is thinned by the etch-back of the polysilicon film 33.
    ポリシリコン膜33のエッチバックにより層間絶縁膜が薄くなる。 - 特許庁
  • To provide a rolling bearing minimizing the stay of washing oil in a thinned part a.
    肉ぬすみa内に洗浄油が留まることを極力なくする。 - 特許庁
  • SLOPE STRUCTURE FOR GREENING UTILIZING THINNED WOOD AND SLOPE GREENING METHOD
    間伐材を利用した緑化用法面構造及び法面緑化方法 - 特許庁
  • The photodiode 102 is formed together with a cover of thinned polysilicon.
    フォトダイオード102は、薄型のポリシリコンの覆いと共に形成されている。 - 特許庁
  • A lattice-like pattern, a halftone dot-like pattern and various kinds of thinned-out patterns are arbitrarily selected from the viewpoint of adhesive force or consumption as the thinned-out pattern.
    間引きパターンは格子状、網点状、その他に考えられる種々の間引きパターンを接着力や消費量の観点から任意に選定する。 - 特許庁
  • To provide a semiconductor device having a thinned substrate with proper yield.
    薄型化された基板を有する半導体装置を歩留まり良く提供する。 - 特許庁
  • To enable a thinned battery lid with an antenna being mounted on the battery lid in a mobile electronic device, and to enable a thinned device case as a result.
    携帯電子機器において、電池蓋にアンテナを実装しながら、電池蓋の薄型化を可能とし、その結果として機器ケースの薄型化を可能とする。 - 特許庁
  • To provide a food container excellent in rigidity even if a sheet is thinned.
    シート厚を薄くしても剛性に優れている食品容器を提供する。 - 特許庁
  • Next, when thinning pixels of a binary image generated using the dither pattern to perform resolution conversion, scan lines to be thinned are not fixed but are thinned in zigzags.
    次いで、そのディザパターンを用いて生成された二値画像の画素を間引いて解像度変換する際に、間引く走査ラインを固定にせずに、千鳥式に間引く。 - 特許庁
  • Recessed thinned sections 46 are formed on the inner faces of side wall sections 33 of a lid 12.
    リッド12の側壁部33の内面に凹状の肉ぬすみ部46を形成する。 - 特許庁
  • To provide a miniaturized and thinned imaging module for finger authentication.
    小型化、薄型化を実現した指認証用撮像モジュールを提供する。 - 特許庁
<前へ 1 2 3 4 5 6 7 8 9 10 11 .... 48 49 次へ>

例文データの著作権について