「timer」を含む例文一覧(7429)

<前へ 1 2 .... 55 56 57 58 59 60 61 62 63 .... 148 149 次へ>
  • To provide an automatic opening/closing adjustment device for opening or closing a window (9) or the like by engaging with an air conditioner when a person sleeps in the summer night by setting a timer of the air conditioner remained on.
    夏の夜にクーラーをタイマーセットしてつけたまま寝たとき等に、自動的に窓(9)等の開閉をする装置に関する。 - 特許庁
  • When a timer time mode is displayed at the display section without setting the current time, a mode switching means, e.g. a microcomputer, for displaying the current time at the display section is provided.
    同時に、操作パネル5上の表示部12を強制的に現在時刻モードに切り替えて「−:−−」と表示する (選択図(c))。 - 特許庁
  • In the power-saving mode for turning off a power source V2 of a main CPU, a timer starts a counter (S101).
    メインCPUの電源V2の電力供給を停止した省電力モード時において、タイマによりカウンタをカウントアップする(S101)。 - 特許庁
  • When a steel ball 21 is moved to the right edge, and the tilt switch 2 is turned on, a timer 31 resets a count value, and starts to count in a predetermined time.
    剛球21が右端に移動してチルトスイッチ2がオンになると、タイマ31がカウント値をリセットして、所定の時間カウントし始める。 - 特許庁
  • When the hot haze phenomenon is included, a hot haze detection signal is outputted through a timer 108 to a switching control part 109.
    かげろう現象が含まれる場合、かげろう検出信号がタイマ108を経由して切替制御部109に出力される。 - 特許庁
  • For example, the output power control means at the time of simultaneous connections increases the output power step-by-step, based on the time count of a timer portion.
    一斉接続時出力電力制御手段は、例えば、タイマ部の計時に基づいて、出力電力を段階的に大きくする。 - 特許庁
  • This driving force distribution device 13 is furnished with an IG off timer 20 capable of measuring elapsed time t_off from stoppage (IG off) of an engine 2.
    駆動力配分装置13は、エンジン2の停止(IGオフ)からの経過時間t_offを計測可能なIGオフタイマ20を備えている。 - 特許庁
  • A register control unit 118 changes a power mode to an energy saving mode if time counted by a timer exceeds the power saving change time.
    レジスタ制御部118は、タイマーにより計測された時間が節電移行時間を超えた場合、電力モードを省エネモードに移行する。 - 特許庁
  • When the compressor 22 is turned off, however, the electromagnetic valves 48 and 54 are closed after a delay as long as the set time T of a timer.
    但し、圧縮機22をOFF制御するときには、タイマの設定時間Tだけ遅延した後に電磁弁48,54を閉成制御する。 - 特許庁
  • A CPU 56 of a pachinko machine 1 prohibits the generation of the timer interruption in a main routine, and then, executes the power supply cut detecting processing.
    パチンコ機1のCPU56は、メインルーチンにおいて、タイマ割込みの発生を禁止した後に、電源断検出処理を実行する。 - 特許庁
  • When starting reception again, measurement of a time t3 is requested to a high-accuracy timer means 44 by initiation (d) and a part of reception signals are accumulated.
    受信再開時には高精度タイマ手段44へ起動(d)により時間t3の計時を要求し,受信信号の一部分を蓄積する。 - 特許庁
  • A timer 12 clocks a prohibited time period during which next high-speed sound recording is inhibited, after high-speed sound recording is performed in an MD unit 3.
    タイマ12は、MDユニット3にて高速録音が行われた後に、次の高速録音が許可されるまでの禁止時間を計時する。 - 特許庁
  • A timer 7 is a clocking means for repeatedly reproducing the message and for adjusting reproduction time intervals etc., of the message.
    タイマ7はメッセージの繰り返し再生を行うための計時手段で、メッセージの再生時間間隔等を調整するためのものである。 - 特許庁
  • The scheduling by OS is avoided by changing the interruption designation address of timer interruption to make a specified process occupy the processor.
    タイマ割り込みの割り込み先アドレスを変更することにより、OSによるスケジューリングを回避し、特定のプロセスにプロセッサを占有させる。 - 特許庁
  • A timer unit 14 measures time required from inspection starting point until the battery voltage value reaches a predetermined standard value as duration time.
    計時部14は、点検開始時点から電池電圧値が所定の規定値に至るまでに要する時間を、持続時間として計測する。 - 特許庁
  • A disc brake device 10 includes a brake controller 40, and the brake controller 40 is connected to an operation switch 41 and a timer 45.
    ディスクブレーキ装置10はブレーキコントローラ40を有し、そのブレーキコントローラ40には操作スイッチ41及びタイマ45が接続されている。 - 特許庁
  • A switching power supply 1 is equipped with a selection circuit 12, an oscillating circuit 16, a timer circuit 17, a switch SW1 and an AND circuit 18.
    スイッチング電源1は、選択回路12と、発振回路16と、計時回路17と、スイッチSW1と、アンド回路18とを備える。 - 特許庁
  • A receiving control unit 32 receives a packet, and detects a packet length and the time stamp of the receiving time of the packet shown by the standard timer.
    受信制御部32は、パケットを受信して、パケット長と、パケットを受信した時の基準タイマが示すタイムスタンプとを検出する。 - 特許庁
  • A wireless tag (timer equipment) in a waiting mode is transferred, upon detecting arrival of a start point on a loop coil (T1), to a power-saved operation mode.
    待機モードの無線タグ(計時機器)は、スタート地点のループコイル上への到達を検出すると(T1)、省電力動作モードに移行する。 - 特許庁
  • When the output of the signal bar B is stopped, a keep timer circuit 7 outputs a signal bar C until the lapse of set time T2.
    キープタイマー回路7は、信号バーBの出力が停止すると設定時間T2が経過するまで信号バーCを出力する。 - 特許庁
  • The register (149) transits from an invalid state to a valid state, when a timer circuit (130) issues an interrupt request.
    レジスタ(149)は、タイマ回路(130)の割り込み要求の発行に伴って無効を示す状態から有効を示す状態に遷移する。 - 特許庁
  • To suppress a circuit scale from being increased due to multi-channel processing by using a timer circuit of an error detection circuit in common.
    エラー検出回路のタイマー回路を共有化することにより、多チャンネル化による回路規模の増大を抑えることを目的とする。 - 特許庁
  • Then, when initializing a timer 72, the values of the writing-in authorization register R2 and the register R3 are each written in buffers B2, B3.
    そして、タイマ72の初期化に際して書き込み許可レジスタR2及びレジスタR3の値がそれぞれ、バッファB2、B3に書き込まれる。 - 特許庁
  • Then, since a set time of the timer has not elapsed, the high-consumption current circuit 6 does not stop and its operation is secured.
    このときには、タイマは設定時間を経過しないので、高消費電流回路6は停止することはなく、その動作が確保される。 - 特許庁
  • Upon the output of a time-up signal from a timer 19, the CPU 11 controls the lighting of each display lamp based upon the its lighting attribute.
    タイマ19からタイムアップ信号が出力されると、CPU11は、点灯属性に基づいて各表示灯の点灯を制御する。 - 特許庁
  • When the next page print preparation complete signal is outputted, the communication control part 4 confirms whether the monitoring timer takes time out or not.
    次ページ印刷準備完了信号が出力されたら、通信制御部4は、監視タイマがタイムアウトしているか否か確認する。 - 特許庁
  • In this microprocessor provided with a watchdog timer, a start-up routine divides processing to be carried out (S120, S170 and S220) into a plurality of pieces of unit processing and performs the unit processing.
    ウォッチドッグタイマを備えたマイコンにおいて、スタートアップルーチンでは、実行すべき処理を複数の単位処理に分けて実行する(S120,S170,S220)。 - 特許庁
  • In resuming the reception, clocking the time t3 is requested for a highly accurate timer means 44 by activation (d) to accumulate part of the receiving signal.
    受信再開時には高精度タイマ手段44へ起動(d)により時間t3の計時を要求し,受信信号の一部分を蓄積する。 - 特許庁
  • The high-voltage driver includes a boosting converter, a pulse-width modulator 35 to control the boosting converter, and a timer to control the pulse-width modulator 35.
    ドライバは昇圧コンバータと昇圧コンバータを制御するパルス幅変調器35とパルス幅変調器35を制御するタイマとを含む。 - 特許庁
  • To enhance safety on control of a system by resetting a module as the need arises when resetting a CPU by a watchdog timer.
    ウォッチドッグタイマーによりCPUをリセットするに際して、モジュールを必要に応じてリセットして、システムの制御上の安全性を高める。 - 特許庁
  • A timer 44 clocks an elapsed time from the last detection of the user's presence by the human detection sensor 37 in the quick start mode.
    当該クイック起動モードにおいて、人感センサー37がユーザーの存在を最後に検知してからの経過時間をタイマー44が測定する。 - 特許庁
  • If the license issuance is received, the license is overwritten with the issued license, and the timer of the updated license is set to terminate processing.
    ライセンスの発行を受けた場合、発行されたライセンスが上書きされ、更新したライセンスのタイマーがセットされて、処理が終了される。 - 特許庁
  • When it is during the timer charge reservation time (S11), the charge power to the battery is controlled so as to turn the SOC to a full charge state SOCfull (S16).
    タイマ充電予約時刻中である場合(S11)、SOCが満充電状態SOCfullとなるようバッテリへの充電電力を制御する(S16)。 - 特許庁
  • When not detecting the contact or when coming off the erroneous detection area, the main control unit 20 stops the timer 24 and resets a measurement time.
    検知しない場合、または誤検出領域から外れた場合、主制御部20はタイマ24を停止し計測時間をリセットする。 - 特許庁
  • The shutter equipment 1 has a timer means 68 for counting the time passing from the arrival of the closing body 11 at the prescribed stop position.
    シャッタ装置1は、閉鎖体11が所定の停止位置に到達した時からの経過時間を計時するタイマ手段68を備えている。 - 特許庁
  • It is determined whether or not communication preparative processing for communication standing on timer interrupt has been completed by the time of the communication start.
    タイマ割り込みに基づく通信の通信準備処理が、その通信が開始されるまでに完了されるか否かが判定される。 - 特許庁
  • Furthermore, the method comprises a step of maintaining the values of the timers and the operation of the timers, without stopping the Timer_Poll_Periodic timer, in response to the step of performing a reset procedure.
    さらに、リセット工程に応答して、Timer_Poll_Periodicタイマーを停止させず、タイマーの値を維持し、タイマーの操作を維持する工程を備える。 - 特許庁
  • At this time, a second timer for measuring receive window time of predetermined destination validation longer than the destination validation time is driven.
    ここで、最初に、宛先確認時間よりも長い所定の宛先確認受信ウィンドウ時間を計測する第2のタイマを起動する。 - 特許庁
  • The secondary decoder device is deactivated upon expiration of a timer value until reactivated by the primary decoder device.
    タイマ値の満了と同時に、第1順位のデコーダ装置によって再度活性化されるまで、第2順位のデコーダ装置は非活性化される。 - 特許庁
  • The RL failure leads to execution of RAB release steps, characterized by utilizing respective timer values to determine if associated RABs should be released.
    RL失敗は、RAB解放工程の実行を導き、その特徴は、各タイマーの値により、相関するRABを解放すべきかどうかを決定する。 - 特許庁
  • To provide a battery charger that can determine whether or not an internal combustion engine has successfully started up when it starts up by means of a timer and a reset circuit.
    内燃機関の始動時に当該始動の成功を、タイマーとリセット回路とにより判断できるバッテリー充電装置を提供する。 - 特許庁
  • The circuit 5 is composed of an off-delay timer and, when the period of the pulse signal is short, converts the pulse signal into a collective pulse having a long pulse width.
    この回路5は、オフディレータイマからなり、パルス信号の周期が短い場合には、ひとまとめのパルス幅の長いパルスに変換される。 - 特許庁
  • Thereby, when a refresh timer generates a refresh timing signal, external command operation can be interrupted by refresh operation.
    これにより、リフレッシュタイマがリフレッシュタイミング信号を発生した時に、リフレッシュ動作を外部コマンド動作に割り込ませることが可能になる。 - 特許庁
  • The circuit 10 refers to the time data of the timer 32 and changes the signal level of a control signal output terminal 12 within regulated time.
    制御回路10は、タイマ32の時刻データを参照し、規定の時刻に、制御信号出力端子12の信号レベルを変化させる。 - 特許庁
  • In addition to a timer function after an ignition switch is OFF, only the operation of the closing direction of the window pane is allowed when a door is opened.
    本発明によれば、イグニッションスイッチオフ後のタイマー機能に加え、ドア開放時においては、窓ガラスの閉方向の操作のみを許容する。 - 特許庁
  • In each timer interrupt processing, one of tasks as a plurality of previously split created sub-routine processings is selected and performed.
    各タイマ割込処理では、予め分割されて作成された複数のサブルーチン処理としてのタスクのいずれかを、選択して実行する。 - 特許庁
  • A timer circuit 114 counts a predetermined time period from when the peak detecting circuit 111 and the comparator 112 detect the peak.
    タイマ回路114は、ピーク検出回路111および比較器112によってピークが検出されてから所定期間を計時する。 - 特許庁
  • Detection is attempted repeatedly at certain intervals decided by a timer means after a power failure occurs until backstop prevention relay output occurs in positive phase sequence.
    停電後に、タイマ手段が計時する所定の間隔で逆転防止リレーの出力が正相順となるまで検出を繰り返す。 - 特許庁
  • In a business trip, an employee carries the RFID clip to write the attending/leaving time data in the RFID clip by the local timer recorder 1.
    出張の際はRFIDクリップを持参して、現地のタイムレコーダ1でRFIDクリップへ出勤/退出時刻データを書込む。 - 特許庁
  • A timer contained in a controller 41 is started when the generation of acidic water (operation for electrolysis) of a device main body 7 is stopped.
    コントローラ41は、装置本体7が酸性水生成動作(電気分解のための運転)を停止すると内蔵するタイマを起動する。 - 特許庁
<前へ 1 2 .... 55 56 57 58 59 60 61 62 63 .... 148 149 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.