「transfer processing」を含む例文一覧(4655)

<前へ 1 2 .... 77 78 79 80 81 82 83 84 85 .... 93 94 次へ>
  • A connector (105) provides electrical connections between the array of transducer cells (103) and the array of circuit cells (227), and an interconnection structure (107) is connected to transfer signals between the circuit cells (227) for processing.
    トランスジューサセル(103)のアレイと回路セル(227)のアレイの間の電気的接続がコネクタ(105)によって提供されており、また処理のために回路セル(227)同士の間で信号を転送するように相互接続構造(107)が接続されている。 - 特許庁
  • To provide a semiconductor memory which determines the quality of data transfer between the semiconductor memory and a host device to which the memory is connected and improves the reliability of read write data, and to provide an information processing system, including the semiconductor memory.
    半導体メモリとこれが接続されるホストデバイスとの間でデータ転送の良否を判定して読み出し/書き込みデータの信頼性向上を図るようにした半導体メモリ及び、その様な半導体メモリを含む情報処理システムを提供する。 - 特許庁
  • When the load of a monitored process is greater than a threshold value, a change control section 34 determines application of change of a rate lower than a prescribed rate to a packet signal coded by the prescribed rate as the transfer processing.
    変更制御部34において監視される処理の負荷がしきい値より大きい場合に、転送処理として、所定のレートによって符号化されたパケット信号に対して、当該所定のレートよりも低いレートへの変更を施すことを決定する。 - 特許庁
  • To provide a framework capable of reducing a burden for memory management processing, and capable of transferring data efficiently and stably without enlarging a shared memory size used for the data transfer, when transferring the data using a USB host controller.
    USBホストコントローラを使用してデータ転送を行う場合に、メモリ管理処理の負担を軽減するとともに、データ転送に用いる共有メモリサイズを大きくすることなく、効率よく安定してデータ転送を行うことができる枠組みを提供する。 - 特許庁
  • To realize transmission reception of the data suitable for a reception level of the portable terminal with a server even at establishment of connection and to reduce the load on a network due to wasteful re-transfer processing in a wireless network whose error rate is considered high.
    コネクション確立時でも携帯端末の受信レベルに適したデータの送受信をサーバーとの間で行うことを可能とし、更に、エラー率が高いと言われる無線網においても、無駄な再転送処理によるネットワークにかかる負荷の軽減を図る。 - 特許庁
  • To provide a microprocessor lowering operation transition probability in command transfer of circuits relating to pipeline processing and reducing total power consumption by reducing ratio of power consumption of the circuits over the total power consumption.
    パイプライン処理に関わる回路の命令移行時の動作遷移確率を低減することができ、それらの回路の消費電力について全消費電力に対する割合を低くして、全消費電力を低減化することができるマイクロプロセッサを提供する。 - 特許庁
  • Comparators 62-65 compare the calculated address of the vector storing command with the address of the scalar load command issued during the snoop processing, and if both addresses are identical, it is determined that a cache failure may be generated and a data transfer request is issued to an L2-cache.
    比較器62〜65で、計算されたベクトルストア命令のアドレスとスヌープ処理中に発行されたスカラロード命令のアドレスとが比較され、アドレスが一致したら、キャッシュミスが生じると判定して、L2−キャッシュにデータ転送要求が発行される。 - 特許庁
  • When the status of the object printer is normal and there is the free buffer, the computer 200 repeats such processing as to transfer the image data to the object printer and wait completion of the printing of the image data and establishment of the idle state of the printer.
    対象のプリンタのステータスが正常、かつバッファに空きがある場合、コンピュータ200は、対象のプリンタに画像データを転送し、画像データの印刷が終了してプリンタのステータスがアイドル状態となるのを待つという処理を繰り返す。 - 特許庁
  • To efficiently, safely and smoothly convey in/out a substrate by roller conveyance and to suppress a transfer mark of a substrate contact part from remaining on a coating film formed on the substrate as minimum as possible while supporting the substrate by a pin with an arbitrary thickness during vacuum drying processing.
    コロ搬送により基板の搬入出を効率よく安全かつスムースに行い、減圧乾燥処理中に任意の太さのピンで基板を支持しつつ基板上の塗布膜に基板接触部の転写跡が付くのを可及的に抑える。 - 特許庁
  • The distribution control part 310 refers to a determination table 320, and when processing loads of service providing devices 200-1 to 200-n serving as transfer destinations of the service requests are high, makes the service requests temporarily accumulated in the media queue 330.
    また、分散制御部310は、判断テーブル320を参照し、サービス要求の転送先となるサービス提供装置200−1〜200−nの処理負荷が高い状態である場合にも、サービス要求をメディアキュー330に一時的に蓄積させる。 - 特許庁
  • To efficiently deliver identical data to a plurality of communication devices by flexibly determining data transfer paths between the communication devices according to the processing capability of each communication device while avoiding excessive load applied on a specific communication device.
    特定の通信装置に過大な負荷がかかることを回避しつつ、通信装置間のデータ伝送経路を各通信装置の処理能力等に応じて柔軟に定め、複数の通信装置へ効率良く同一のデータを配信することを可能にする。 - 特許庁
  • At the time of printing, a calibration table corresponding to the kind of the transfer material to be used is selected from the calibration tables updated, and processing conditions such as a quantity of exposure and a development bias and a gradation correcting means such as a look-up table (LUT) are calibrated.
    プリントの際に、更新された複数のキャリブレーションテーブルから、使用する転写材の種類に応じたキャリブレーションテーブルを選択し、露光量や現像バイアスなどのプロセス条件、ルックアップテーブル(LUT)などの階調補正手段をキャリブレートする。 - 特許庁
  • In an image forming apparatus 10, when cleaning processing for the transfer belt is set, whether or not a front cover or a top cover is opened is confirmed, and when any cover is opened, toner concentration is set based on ambient temperature and humidity (steps 200 to 206).
    画像形成装置10では、転写ベルトのクリーニング処理が設定されていると、フロントカバー又はトップカバーが開かれたか否かを確認し、何れかのカバーが開かれると、環境温度、湿度に基づいてトナー濃度を設定する(ステップ200〜206)。 - 特許庁
  • To achieve simplification of implementation and enhancement of scalability by reducing the processing of each communication device while enhancing fairness of transfer quality between users in a multistep line concentration configuration in an access section.
    本発明は、アクセス区間における多段集線構成においてユーザ間転送品質公平性を向上させながら、各通信装置の処理低減による実装の簡易化およびスケーラブル性向上を実現することを可能とすることを目的とする。 - 特許庁
  • To provide an image processing system for digital printing, capable of improving the throughput and the efficiency of the transfer of image data to an imaging device such as a laser as well as capable of achieving dynamic and continuous adjustment of the image size and registration (alignment) on a recording medium.
    レーザのようなイメージングデバイスに対するイメージデータの転送のスループットと効率を向上させ、同時に記録媒体上での動的、連続的なイメージサイズの調整と見当合わせ(整列)を可能とするデジタル印刷用のイメージ処理システムの提供。 - 特許庁
  • In this magnetic information transfer processing apparatus, magnetic information is transferred from an S pole side object to an N pole side object by using one coil and driving current by a simple intermittent current or a pulse wave.
    本発明は一つのコイルを使用し、単純な直流の断続もしくはパルス波による駆動電流により、磁気情報をS極側物体からN極側物体に磁気情報転写させるように構成した磁気情報転写処理装置とした。 - 特許庁
  • Processing based on a transfer indication is interrupted when judged to be the specified age group and when judged to be come within an abnormal transaction condition by an abnormal transaction judging function, based on the transaction history information or a judgement estimation result.
    そして特定年齢層であると判断され、異常取引判断機能が取引履歴情報又は前記判断力推定結果から異常取引条件に該当すると判断した場合に、振込指示に基づく処理を中断させる。 - 特許庁
  • To provide a recording medium manufacturing method having excellent throughput at the time of mass production, in which the shape and dimensions of a pattern obtained by fine processing are easy to control, exact pattern transfer is made, and excellent uniformity is obtained.
    量産化のときのスループットが良好で、低価格化が可能であり、微細加工によって得られたパターンの形状や寸法の制御が容易で、正確なパターン転写が可能で、かつ均一性に優れる記録媒体作製方法を提供する。 - 特許庁
  • To provide a data transfer unit capable of transferring proper graphic data to an image processing equipment like a printer in a case that a large amount of data are transferred by another bus master in a computer system using a bus shared with another bus master.
    他のバスマスタと共有されるバスを用いたコンピュータシステム内において、他のバスマスタにより転送されるデータ量が多い場合であっても、プリンタ等の画像処理装置への適切な画像データの転送を可能にするデータ転送装置を提供する。 - 特許庁
  • To allow backup or transfer processing of data being processed, to be performed with minimum required power supply by supplying power to only a controller from the outside even in the case that power of a MFP is broken due to a power failure or a power interruption.
    停電または電源遮断時でMFPの電源が遮断されても、外部からコントローラのみに電源供給することにより、必要最小限の電力供給で処理中のデータのバックアップまたは転送処理を行うことを可能にする。 - 特許庁
  • To suppress the futile power consumption in the inactive period of the recording operation, that caused by that the intermittent recording operation to a disk is carried out when the data processing speed is higher than the transfer speed of received data in a disk recorder.
    ディスク記録装置におけるデータ処理速度が受信データの転送速度より高速であると、ディスクへの記録動作が間欠的に行われることになり、その記録動作の休止期間における消費電力が無駄になるので、これを解決する。 - 特許庁
  • To provide an improved data processing system architecture reducing waiting time of communication between physically separating processors, reducing bus bandwidth consumption, and releasing the bus bandwidth for a general data transfer between the processor and a hierarchical memory system.
    物理的に離れたプロセッサの間の通信の待ち時間を減らし、バス帯域幅消費を減らし、プロセッサおよび階層メモリ・システムの間の一般データ転送のためにバス帯域幅を解放する、改善されたデータ処理システム・アーキテクチャを提供すること。 - 特許庁
  • The parallel operation device includes a plurality of operation execution elements which performs parallel processing, and a transmission path disposed each between the plurality of operation executing elements to transfer data to be transmitted and received between the plurality of operation executing elements.
    並列処理を実行する複数の演算実行要素と、複数の演算実行要素の各々の間に配置され、複数の演算実行要素の間で送受信されるデータを伝送する伝送路とを具備する並列演算装置を構成する。 - 特許庁
  • To provide a network management means and a packet switching apparatus for reducing a delay and delay fluctuation with data transfer while avoiding a delay time caused by connection setting and for efficiently processing a connectionless data flow in a large-scale data network.
    コネクション設定によって起こる遅延時間を避けて、データ転送に伴う遅延と遅延変動を小さくすると共に、大規模データネットワークにおけるコネクションレスデータフローの処理を効率良く行う網管理手段及びパケットスイッチ装置を提供する。 - 特許庁
  • When instructed to have the change of compressibility from the user and receives a printing job with collation, the file size control part 570 controls compressibility according to a data transfer rate between the front end and the back end, an image data size and processing speed on the output side.
    ユーザより圧縮率変更ありが指示され、帳合処理ありの印刷ジョブを受け付けると、ファイルサイズ制御部570は、フロントエンドとバックエンド間のデータ転送レート、イメージデータサイズ、および出力側の処理速度に応じて、圧縮率を制御する。 - 特許庁
  • To provide an image processing system for digital printing which can improve the throughput and efficiency of the transfer of image data to imaging devices such as lasers, and at the same time enables dynamic and continuous adjustment of an image size and registration (alignment) on recording media.
    レーザのようなイメージングデバイスに対するイメージデータの転送のスループットと効率を向上させ、同時に記録媒体上での動的、連続的なイメージサイズの調整と見当合わせ(整列)を可能とするデジタル印刷用のイメージ処理システムを提供する。 - 特許庁
  • To remove manual labor out of a person in charge and eliminate misoperations by automatically generating consumption tax processing and a plurality of transfer journalizing, and also to integrate even the work of a plurality of financial accounting without consciousness by having on hand the information of accounting unit.
    消費税処理と複数件の振替仕訳を自動的に生成して、担当者の手作業廃止と作業ミスをなくすとともに、会計単位の情報も持ち合わせて複数の財務会計も意識無く作業統合できるようにする。 - 特許庁
  • A control part 21 of the station server 20 which has received the ticket examination confirmation notification executes the card information confirmation processing, and the control part 21 of the station server 20 transmits the ticket examination instruction including a reload instruction equivalent to the transfer amount to the ticket examination device 10.
    再度、改札確認通知を受信した駅サーバ20の制御部21は、カード情報確認処理を実行し、駅サーバ20の制御部21は、改札装置10に対して、振替金額に相当するチャージ指示を含めた改札指示を送信する。 - 特許庁
  • When the number for setting transfer paper is repeated, paper aligning can be done in a short time so that the time is delayed at the first time when a user is not accustomed with paper supply and the time is gradually shortened at the second time and after to perform image formation processing more efficiently.
    転写紙をセットする回数を重ねると、紙揃えが短時間で処理できるようになるので、慣れていない最初のときには遅くし、2回目以降は徐々に時間を短くして、より効率的に画像形成処理ができるようにする。 - 特許庁
  • To provide an arbitration circuit and a method of shared memory which can improve the switching speed to a different type instruction and also can reduce the degradation of its transfer performance by processing with the highest priority an instruction having the same type as that of the instruction under execution.
    現在実行中の命令と同種命令を最優先で処理することにより、異種命令への切り替え速度を改善し、転送性能の低下を軽減する共有メモリ調停回路およびその調停方法を提供する。 - 特許庁
  • A method for removing adhered ash at the flue of a boiler for refuse and fuel manufactured by processing refuse is that to remove ash adhered to a heat transfer pipe 4 at a flue 20 through which exhaust gas from a fuel boiler flows.
    ごみ及びごみを加工して作製した燃料ボイラからの排気ガスを流す煙道20における、伝熱管4に付着する灰を除去するごみ及びごみを加工して作製した燃料ボイラの煙道における付着灰除去方法である。 - 特許庁
  • An inverted filter processing unit 10 obtains the transfer function H(k) of a reverberation space using the impulse response of a feedback path H_AC in which a first echo canceler 30A identifies in an accommodative manner by an adaptive filter 31A, namely, a filter coefficient h^_i(j).
    逆フィルタ処理部10では、第1のエコーキャンセラ30Aが適応フィルタ31Aによって適応的に同定した帰還経路H_ACのインパルス応答、すなわち、フィルタ係数h^_i(j)を用いて残響空間の伝達関数H(k)を求める。 - 特許庁
  • A high-speed image processing device is installed near the network of a PACS server for carrying out storage and transfer of medical image data, and a parameter set for duplicating a reference image is attached to an image diagnosis report created by an image diagnosis medical specialist.
    医用画像データの保管と転送を行うPACSサーバーのネットワーク的近傍に高速の画像処理装置を設置し,画像診断専門医の作成する画像診断報告書に参照画像を再現するためのパラメータセットを添付する。 - 特許庁
  • To provide a technology for not increasing a processing load on a digital broadcast receiving apparatus and eliminating the need for long time for transfer and updating of a downloaded program, when the digital broadcast receiving apparatus transfers the program downloaded by broadcast signals to an electronic device and updates it.
    デジタル放送受信装置が放送信号によりダウンロードしたプログラムを電子機器に転送し更新する際に、デジタル放送受信装置の処理負荷が増大せず、ダウンロードプログラムの転送や更新に長い時間を必要としない技術の実現。 - 特許庁
  • To preferentially perform transmission/reception processing of a data transfer command to a higher priority OS by restricting an IOPS and an MBPS when using an HBA from each OS to a prescribed threshold value when the plurality of OSs physically uses the same HBA.
    サーバ内に複数のOSがHBAやストレージ装置のポートを共有している場合、OSと論理ボリュームが接続する際の性能を他の接続の使用状況を考慮し、従来の接続プロトコルを拡張することなく行うことができない。 - 特許庁
  • To provide a packet transfer system or the like capable of properly monitoring a flow of packets at low cost without increasing the processing load even in the case of adopting the observation type reception control under the leadership of terminals for transferring test and preferential packets whose priorities differ from each other.
    互いに優先度の異なる試験パケット及び優先パケットの転送が行われる端末主導の観測型受付制御の場合においても、処理負荷を増大させることなく、かつ適正に安価にパケットの流量を監視する。 - 特許庁
  • In a program transfer control part, the additional information of the image data is decoded (a step S1), a module of a necessary image processing program is selected or a parameter of a module to be used, etc. is selected (a step S2) according to the contents of the additional information.
    プログラム転送制御部では、画像データの付属情報が解読されて(ステップS1)、この付属情報の内容に応じて、必要な画像処理プログラムのモジュールが選択され、あるいは、使用するモジュールのパラメータなどが選択される(ステップS2)。 - 特許庁
  • The region is set so that for example, the unit regions (sectors) where reduction of the transfer rate is caused, such as an alternation processing sector, a retry sector, a sector after head change and seek, and a sector after track jump seek, are not positioned in the middle of each access unit BL as far as possible.
    例えば交替処理セクタ、リトライセクタ、ヘッドチェンジやシーク後のセクタ、トラックジャンプシーク後のセクタなど、転送レート低下が発生する単位領域(セクタ)が、極力、各アクセス単位BLの途中に位置することがないように領域設定する。 - 特許庁
  • This processing, for example, reads out a patch printed on a transfer belt, detects the shift of a printing position, adjusts a reference of the printing shift to an image center by using the data on the length of the printing head to this detected result, to make the shift inconspicuous.
    この処理は、例えば転写ベルトに印刷されたパッチを読み出し、印字位置ずれを検出し、該検出結果に対して印字ヘッドの長さデータを使用して印字ずれの基準を画像センタに調整し、ずれを目立たなくするものである。 - 特許庁
  • This device has ATM input/output circuits 1-1 to 1-M which can transmit and receive the ABR cells, and every ATM input/output circuit has an ATM cell processing circuit 3 and a statistical information transfer/ accumulating part 4.
    ABRセル統計情報転送集計装置は、ABRセルの送受信が可能なATM入出力回路1-1〜1-Mを備え、各ATM入出力回路は、ATMセル処理回路3と、統計情報転送集計部4とを有する。 - 特許庁
  • Setting of delay correction times D_T1, D_T2, D_T3 to audio signals transmitted from various communication terminals is accepted and in accordance with the delay correction times D_T1, D_T2, D_T3, delay is added to an audio signal to be transferred by a signal transfer processing section 11.
    各種の通信端末から送信される音声信号に対する遅延補正時間D_T1,D_T2,D_T3の設定を受け付け、その遅延補正時間D_T1,D_T2,D_T3に応じて、信号転送処理部11により転送される音声信号に遅延を付加する。 - 特許庁
  • To provide an image protecting film capable of smoothly performing thermal transfer processing and capable of forming a protective layer excellent in image protecting properties, blocking resistance or the like on an image surface, an image protecting method using the same and overcoated recorded matter.
    熱転写処理をスムーズに行うことができ、且つ画像保護性能、耐ブロッキング性などに優れた保護層を画像面上に形成し得る画像保護フィルム、並びにこれを用いた画像保護方法及びオーバーコート記録物を提供すること。 - 特許庁
  • TDM(time division multiplex) interface processing units 1-1 to 1-j, packet switches 3-1 to 3-k, and ATM(asynchronous transfer mode) switches 4-1 to 4-m are configured by a packaging circuit substrate, and this packaging circuit substrate is configured made compatible by a slot T.
    TDM・I/F処理部1−1〜1−jと、パケットスイッチ3−1…3−k及びATMスイッチ4−1…4−mが、実装回路基板で構成され、かつ、この実装回路基板が、スロットTによって互換可能に構成されている。 - 特許庁
  • A pre-processing filter 12 having the same characteristics as an adaptive inverse filter 14 is provided to the input side of a circuit composed of a series connection circuit consisting of an unknown transfer function 13 and the adaptive inverse filter 14 and a filter 15 connected in parallel with the series connection circuit.
    未知伝達関数13と適応逆フィルタ14との直列接続回路と、これらの回路に並列に接続された帯域フィルタ15との入力側に、適応逆フィルタ14と等しい特性を有する前処理フィルタ12を設ける。 - 特許庁
  • When a recording part 3 breaks down and printout processing cannot be performed, image data stored in an image memory 8 are transferred to a flash memory 21 according to a transfer instruction made by a user so that the other equipment can be made to print out the image data.
    記録部3が故障してプリントアウト処理を行えない場合に、ユーザによってなされる転送指示に従って、画像メモリ8に記憶されている画像データをフラッシュメモリ21へ転送して、他の機器でプリントアウトを行えるようにする。 - 特許庁
  • When a terminal unit moves between the communication areas A, B, the narrow area radio communication whose communication speed is high is performed in the boundary between the communication areas A, B, and dial up connection processing to a transfer destination is made while the narrow area radio communication is performed.
    端末装置が通信エリアA,B間を移動する際に、通信エリアA,Bの境界では通信速度が高速な狭域無線通信が行われ、この狭域無線通信が行われている間に移動先へのダイアルアップ接続処理を行う。 - 特許庁
  • To provide an information processing technique providing easy and flexible designating and changing of a transfer destination (a storage destination) of data without burdening a user with programming when transferring data extracted from a data base to a spreadsheet AP or the like.
    データベースから抽出したデータを表計算AP等へ転送する場合に、ユーザにプログラミングの負担を与えることなく、データの転送先(格納先)の指定や変更を容易かつ柔軟に行うことができる情報処理技術を提供する。 - 特許庁
  • To provide a that can quickly transfer only a required image among image data stored in a portable communication terminal, require only simply processing and reflect copyright information before the transmission of the image.
    本発明は、携帯通信端末に格納されている画像送データの中で必要な画像だけを迅速に転送することができ、処理がシンプルで、著作権情報を転送前に反映できる携帯情報端末装置を提供することを目的とする。 - 特許庁
  • To obtain a parallel multi-target tracking device reducing the transfer amount of data to conduct optimum load dispersion by conducting dispersion- processing using plural processors and by dispersing the tracking data to be stored, when controlling the movement prediction for plural targets.
    複数の目標物の移動予測の管理を行う際に、複数のプロセッサで分散処理するとともに、航跡データを分散させて保有させることにより、データの転送量を減らし、最適な負荷分散を行う並列多目標追尾装置を得る。 - 特許庁
  • The image processing device is adapted to generate at least one three- dimensional image data set of the object volume based on obtained image data and is further adapted to computer a transfer function range for use in volume rendering.
    この画像処理装置は、取得した画像データに基づいて対象ボリュームの少なくとも一つの3次元画像データ組を生成させるように適合させ、さらに、ボリューム・レンダリングで使用するための変換関数の範囲を計算するように適合させている。 - 特許庁
<前へ 1 2 .... 77 78 79 80 81 82 83 84 85 .... 93 94 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.