「Code」を含む例文一覧(44691)

<前へ 1 2 .... 846 847 848 849 850 851 852 853 854 .... 893 894 次へ>
  • An error of a prediction value obtained by predicting a pixel value of a pixel of interest with respect to the pixel value of the pixel of interest is calculated; a run length representing a length in which an error is 0 is generated in accordance with the calculated error; and, when the calculated error is other than 0, code data is generated by encoding the error and the run length, respectively.
    注目画素の画素値を予測した予測値の、注目画素の画素値に対する誤差を算出すると共に、算出された誤差に応じて誤差が0である長さを示すランレングスを生成し、算出された誤差が0以外のときに、誤差とランレングスとをそれぞれ符号化して符号データを生成する。 - 特許庁
  • Then, when the total number of unprinted pages included in the print jobs of the same intensive code reaches more than the sheets N (intensive sheets of papers) of images (pages) to be formed on one recording sheet (NO in a step S24), the job controlling part indicates that the images for the N sheets are printed on one recording sheet (a step S26).
    そして、ジョブ管理部は、同じ集約コードのプリントジョブに含まれる未印刷ページの総数が、一の記録シートに形成すべき画像(ページ)の枚数(集約枚数)N以上になって(ステップS24でNO)初めて、当該N枚分の画像を一の記録シートに印刷するように指示する(ステップS26)。 - 特許庁
  • The sub-packets 33, 34, 35, 36 and 37 have a sub-packet start signal 21 showing the start of the sub-packet, a sub-packet control signal 22 having information on the sub-packet, data 23, a sub-packet quality deciding code 24 for checking the error of the sub-packet and a sub-packet termination signal 25 showing termination of the sub-packet.
    サブパケット33、34、35、36、37はサブパケットの開始を示すサブパケット開始信号21と、サブパケットの情報を盛り込んだサブパケット制御信号22と、データ23と、サブパケットのエラーのチェックをするためのサブパケット良否判定符号24と、サブパケットの終了を示すサブパケット終了信号25を有する。 - 特許庁
  • Then the transmission path measurement section includes 32 sets of inverse spread processing units located in parallel corresponding to 1/4 of the number of chips included in a spread short code by taking into account the trade-off among the high speed processing, the circuit scale and the power consumption, and uses them four times in time division to carry out the measurement for 32×4 times=128 points.
    そして、高速化と回路規模及び消費電力というトレードオフを勘案し、拡散ショートコードに含まれるチップ数の4分の1に相当する32個の逆拡散器を並列して配置し、これらを時分割で4回使用することにより、32個×4回=128ポイント分の測定を行なう。 - 特許庁
  • In the host 101, an IP 111 issues CCWs 401, and a CH 113 encodes the CCWs 401 and a CCW chain 402 with an encoding program 115 to create code 403 in a format including descriptions of conditional branch control over the DKC 102, and sends it to a PORT 121 of the DKC 102.
    ホスト101は、IP111がCCW401を発行し、CH113が、CCW401やCCWチェイン402を、エンコードプログラム115によりエンコード処理して、DKC102との条件分岐の制御の記述を含んだ形式のコード403を作成し、DKC102のPORT121に送信する。 - 特許庁
  • Consequently, the character information in the plurality of languages are encoded in the plurality of storing areas E1... EN of the QR code's Q, and a two-dimensional code reader 10 reads the character information in the recording area in which the language identifier corresponding to the designated language is contained, thereby enabling reading only the character information of the designated language.
    このため、QRコードQには、複数言語の文字情報を複数の記録領域E1・・・ENにコード化しておき、2次元コードリーダ10側で、指定された言語に対応する言語識別子の含まれる記録領域内の文字情報を読み出すことで、指定された言語の文字情報のみを読み出すことが可能となる。 - 特許庁
  • When staff member ID is input, a pass code issuing device 1 installed in an enterprise 1a to which a staff is dispatched generates pass codes different every day by using staff member identification data for identifying each staff member, working place data for specifying the place of work of the staff member and working time data depending on the working time of the staff member.
    スタッフが派遣される企業1aに設置されたパスコード発行装置1は、スタッフIDを入力すると、個々のスタッフを識別するためのスタッフ識別データ、スタッフの勤務先を特定するための勤務先データ、スタッフの出勤時間に依存する出勤時間データとを用いて日毎に異なるパスコードを生成する。 - 特許庁
  • In the case of the playing method code, an automatically decided (or manually specified) playing method, a specification event of the playing method, various parameters inherent to the playing method, the number of beats continuing the playing method, and respective data are stored in a buffer, an event corresponding to the specified event stored in the buffer is searched and a prescribed mark is attached to the searched event.
    奏法コードの場合は、自動判定(又は手動指定)された奏法、該奏法の指定イベント、該奏法に固有の各種パラメータ、及び該奏法を継続する拍数と、当該各データがバッファに格納され、バッファに格納された指定イベントに対応するイベントがサーチされ、当該イベントに所定のマークが付される。 - 特許庁
  • In a display program, whether an acquired instruction is Complex Glyph or instructions other that it (e.g. End Of Code) is determined (S305, S307, S308), when it is determined that the instruction is Complex Glyph, each part Glyph is drawn, based on Glyph index, affin parameter and offset (information about the part Glyph) acquired following the Complex Glyph (S306).
    取得した命令が、ComplexGlyphかそれ以外の命令(EndOfCode等)かを判定し(ステップS305、S307、S308)、ComplexGlyphであると判定された場合には、そのComplexGlyphに続いて取得されるグリフインデックス、アフィンパラメータ、及びオフセット(パーツグリフに関する情報)に基づいてパーツグリフそれぞれを描画するようにした(ステップS306)。 - 特許庁
  • In writing into a storage area 50 information in accordance with a bar-code inputted as printing data, information on white color to be a color of one of the bars is written in an entire work area 56 and then in a printing area 58 black bars 62A, 62B, 62C, 62D, 62E, and 62F are written consecutively.
    印字データとして入力されたバーコードに応じた情報を記憶領域50に書き込むときには、作業エリア56の全域に一方のバーの色である白色の情報を書き込み、この後、印字エリア58に、他方のバーである黒バー62A、62B、62C、62D、62E、62Fを順に書き込む。 - 特許庁
  • In the case that a user feels inconvenient during a speech such as hard of conversation due to many delays or hard of transmission of a speech to an opposite party due to deteriorated voice quality, the user enters a predetermined PB code from a telephone to select types of the voice coders (121, 122, 123) and the voice decoders (141, 142, 143).
    通話中において遅延が多く会話がしづらい、又は、音声品質が悪く相手に話が伝わりにくい等、利用者が不都合を感じた場合、予め定められたPBコードを電話機から入力し、音声符号器(121、122、123)及び音声復号器(141、142、143)の種別を切り替える。 - 特許庁
  • When a set value respectively corresponding to a tax rate, a price inputting method, a bar code internal price, a fraction processing method, a tax including price printing method, and a price displaying table is set by using a display section 35 and an operation panel 34, the tax including price and the price displaying table by a specified format corresponding to the set value which has been set are printed.
    表示部35および操作パネル34を用いて、税率、価格入力方法、バーコード内価格、端数処理方法、価格税込み印字方法、価格表示テーブルのそれぞれに対応する設定値を設定すると、設定された設定値に対応する所定のフォーマットで税込み価格、価格表示テーブルが印字される。 - 特許庁
  • Two gear mechanism elements 1 and 2 are sequentially mounted on a common axle L and have an operative connection to a drive element which is driven by the steering wheel, and they are relatively rotated when the steering angle changes, and a steering angle determining device is formed in which a code carrier is formed by one of the two gear mechanism elements 1 and 2.
    2つのギヤ機構部材1、2が、共通軸Lに前後に設けられ、ハンドルによって駆動される駆動部材3に作動接続し、かつ、ステアリング角が変化すると互いに対して回転し、コードキャリヤがギヤ機構部材1、2の一方によって構成されているステアリング角決定装置を構成する。 - 特許庁
  • This clothes rearranging device successively sorts hangers 1 supplied from a charging chute 2 after reading order receiving numbers by a bar code reader 3, by a sorting unit 20, and successively supplies the hangers by the order of serial numbers of locking parts of circle conveyors A-C by charging screw conveying units 4A-4C and taking-out/charging units 10A-10C.
    投入シュート2より供給されて受注番号がバーコードリーダ3で読み取られたハンガー1は、順次振り分けユニット20によって振り分けられ、投入スクリュー搬送ユニット4A〜4C及び取り出し・投入ユニット10A〜10CによってサークルコンベアA〜Cの係止部の順列番号順に順次供給される。 - 特許庁
  • The electronic device 10 includes: a display unit 15; a display control unit 11a which causes the display unit 15 to display a display image formed in accordance with the information; and a revision control unit 11b which performs a revision process on an image element as a revision object which is defined by a character code contained in the information or vector information.
    この電子機器10は、表示部15と、情報に基づいて形成した表示画像を表示部15に表示させる表示制御部11aと、情報に含まれる文字コード又はベクトル情報により規定される改変対象の画像要素に対して改変処理を施す改変制御部11bとを備える。 - 特許庁
  • This music information display device has musical piece data of many musical pieces stored in a musical piece database D and also has music information display data for displaying music information, such as musical scores, lyrics, and code names displayed as assistance for musical piece playing, prepared in a music information database H.
    この曲情報表示装置では、多数の楽曲について楽曲データが楽曲データベースDに記憶され、各楽曲に対応して、楽曲演奏の補助として表示される楽譜、歌詞、コード名などの曲情報を表示するための曲情報表示データが曲情報データベースHに用意される。 - 特許庁
  • This database system 20 has: a character extraction means for sequentially extracting a character from a series of 8-unit code included in digital broadcast information 1 transmitted by the digital broadcast; and a word buffer storage means for storing the extracted character into a word buffer.
    本発明に係るデータベースシステム20は、デジタル放送で送信されるデジタル放送情報1に含まれる一連の8単位符号から順次文字を抽出する文字抽出手段と、前記抽出した文字を単語バッファに格納する単語バッファ格納手段と、を備えたことを特徴とするものである。 - 特許庁
  • The television receiver 100 controls the code of the received remote control signal in a different manner depending on a signal from the first remote controller 10 or a signal from the second remote controller 20.
    そして、受信したリモートコントロール信号のコードで示される指令によるテレビジョン受像機100での動作の制御状態を、判別結果で第1のリモートコントロール装置10からの信号と判別した場合と、第2のリモートコントロール装置20からの信号と判別した場合とで、異なる制御状態に設定するようにした。 - 特許庁
  • To provide an extension function code generating method in a keyless entry system for vehicles capable of generating a large number of new command codes, and its device by providing an additional function extension switch to a transmission device for a conventional keyless entry system, and changing the control software.
    従前のキーレスエントリシステムの送信装置に機能拡張スイッチを例えば1つ追加して設け、あとは制御ソフトウェアを変更するだけで数多くの新たなコマンドコードを生成することができる車両用キーレスエントリシステムにおける拡張機能コード生成方法、及びその装置を提供することを課題とする。 - 特許庁
  • When the authentication application receives the identification code and a password from the user terminal, it refers to the personnel information database for personnel information of the relevant user, retrieves authority information stored in an application management database on the basis of personnel information and decides the application with access authority of the user.
    前記認証アプリケーションは、ユーザ端末から識別コードとパスワードを受け取ると、前記人事情報データベースに対して該当するユーザの人事情報を照会し、前記人事情報に基づいて、前記アプリケーション管理データベースに格納されている権限情報を検索して、前記ユーザのアクセス権限のあるアプリケーションを決定する。 - 特許庁
  • The system, first, detects pulse width (W) of 8 to 16 modulation (EFM+) signals, when the pulse width of the EFM+ signal is in default window width or the puls width of the EFM+ signal is illegal pulse width, an erasure control signal is generated, the corresponding code is set to erasure, an erasure address is formed.
    この製品はまず8から16変調(EFM+)シグナルのパルス幅(W)を検知し、該EFM+シグナルのパルス幅がデフォルトウィンドウ幅にある時、或いは該EFM+シグナルのパルス幅が非合法なパルス幅である時、消去制御信号が発生し、対応するコードをが消去( erasure) に設定し、消去アドレスを形成する。 - 特許庁
  • An evaluation point calculating part 38, a code book 16 and a field processing part 39 collate a label string provided by a vector quantizing part 36 with a grammer corresponding to the field of a designated voice input object and determine a field to store data (input data) expressed by that label string on the basis of this collated result.
    評価点計算部3、符号帳16、およびフィールド処理部39は、指定された音声入力対象のフィールドに対応する文法に、ベクトル量子化部36により得られたラベル列を照らし合わせ、かかる照合結果に基づき、該ラベル列が表すデータ(すなわち入力データ)を格納するフィールドを決定する。 - 特許庁
  • To realize a front-end module which can process a transmission signal and a reception signal in each of first and second frequency bands and a reception signal in a third frequency band, can cope with a code division multiple access system, and is easily made small and light, combined, and integrated.
    第1および第2の周波数帯域のそれぞれにおける送信信号および受信信号と第3の周波数帯域における受信信号とを処理できると共に符号分割多重接続方式に対応可能で、且つ小型軽量化、複合化および集積化が容易なフロントエンドモジュールを実現する。 - 特許庁
  • The private branch exchange B2 compares the sub address included in the received message with an access code that has been set in advance in a database and conducts processing in a system maintenance mode or in a system monitor mode according to the result of comparison in cooperation with the private branch exchange A2 by transmitting a message to the private branch exchange A2.
    構内交換機B2では、受け取ったメッセージに含まれるサブアドレスを、予めデータベースに設定しておいたアクセスコードと比較し、その比較結果に応じてシステム保守モードまたはシステム監視モードの処理を、構内交換機A2にメッセージを送信することにより、構内交換機A2と協調して行う。 - 特許庁
  • To provide a film read technology capable of stably interpreting bar codes even when an illumination light system is equipped, the system providing a much more decreased and unequal luminous quantity distribution to a bar code area arranged at ends of a photo film in the width direction in comparison with a photographing image area located in the middle of the photo film.
    写真フィルムの幅方向端部に配置されているバーコードエリアに対しては写真フィルムの中央部に配置されている撮影画像エリアに比べてより低下した不均等な光量分布を与えるような照明光学系を装備していても、安定したバーコードの解読が可能となるフィルム読取技術を提供する。 - 特許庁
  • The device 240 for controlling the processing specified according to the destination combines artwork information corresponding to the commodity code with the information such as traceability information read from the wireless tags 12 of the consumption articles 10 by a reader/writer 260, and a composite image obtained thereby is printed on a label by a labeling processor 270 for attachment to to the consumption articles 10.
    仕向先別加工制御装置240は、その商品コードに対応するアートワーク情報と、リーダライタ260が消耗品10の無線タグ12から読み出したトレーサビリティ情報等とを合成し、その合成画像をラベル付け処理装置270によりラベルに印刷させ、消耗品10に貼付させる。 - 特許庁
  • A DR history calculation circuit 81 calculates a history DR_hist representing a temporal transition of a dynamic range DR of an SD pixel at a position corresponding to a pixel of interest based on an ADRC code resulting from applying ADRC processing to an inputted image, the dynamic range DR and data representing the dynamic range DR in data representing a minimum value MIN.
    入力される画像に対してADRC処理が施されることで得られるADRCコード、ダイナミックレンジDR、最小値MINを表すデータのうちのダイナミックレンジDRを表すデータに基づいて、注目画素に対応する位置のSD画素のダイナミックレンジDRの時間的な遷移を表す履歴DR_histがDR履歴算出回路81により算出される。 - 特許庁
  • When a received 4-value FSK signal is converted to a 4-value digital code, a mean value circuit 12 calculates a mean value of a demodulation signal 3, and the processing of increasing/decreasing overall the value of a digital signal is always conducted stepwise in a waveform shaping circuit 13, so that the mean value is a 2nd reference value.
    受信した4値FSK信号を4値ディジタル符号に変換する際に、平均値回路12により復調信号3の平均値を計算し、波形整形回路13は、その平均値が第2の基準値となるようにデジタル信号の値を全体的に増減する処理を常に段階的に行う。 - 特許庁
  • In this case, the decoding part 22 judges whether or not relation between the calculated pairs of remainders and the reference remainders is a prohibited relation for each of the component codes and judges that the identification information is not used for the coalition attack when the relation is judged in at least one component code to be a prohibited relation.
    その際、復号部22は、各成分符号について、求められた剰余対と基準剰余との関係が禁止関係であるか否か判断し、少なくとも1つの成分符号において禁止関係であると判断された場合には、当該識別情報は結託攻撃に使用されたものではないと判定する。 - 特許庁
  • A GPS terminal 1 reads encrypted data D11 received from a server 2 beforehand and stored in the server itself for a character code value indicating each of numbers constituting a digit string, adds and encrypts numerical values of respective digits constituting the encrypted data D11, and transmits a latitude (LAT) and a longitude (LONG) which are encrypted (M105).
    GPS端末1が、数字列を構成する各数字を示す文字コード値に対し、予めサーバ2から受信し自身に記憶した暗号化データD11を読み出し、該暗号化データD11を構成する各桁の数値を加算し暗号化し、暗号化された緯度及び経度を送信する(M105)。 - 特許庁
  • A transmitter performs structural low-density parity check coding, with respect to inputted information data by using the structural low-density parity check codes, and parallel conversion of structural low-density parity check code words generated by carrying out the structural low-density parity check coding is performed, in units of groups of predetermined size, and the data are transmitted.
    送信機は、入力される情報データに関して、構造的低密度パリティ検査符号を用いて構造的低密度パリティ検査符号化を行い、構造的低密度パリティ検査符号化を遂行して生成された構造的低密度パリティ検査符号語を、所定のサイズのグループ単位で並列変換してデータを送信する。 - 特許庁
  • A credit card, a debit card, or a transaction-enabling instrument 200 has encoded thereon in machine-readable form a telephone number of a portable wireless communications device 102, such as a cell phone or a PDA, of the instrument's owner, who is typically the holder of the instrument, and a transaction-authentication code.
    クレジット・カード、デビット・カード、および小切手といった取り引きを有効化する道具は、通常ではその道具の携行者である道具の所有者の携帯電話もしくはPDAといった携帯型無線通信装置の電話番号、および取り引き認証符号を機械読み取り可能な形式でその上に符号化されている。 - 特許庁
  • Two systems of clocks are inputted to a NOR circuit 21 and an AND circuit 22 and only the output side of the NOR circuit 21 is delayed and then inputted to an OR circuit 24, so that a clock extracting circuit 2 extracts a clock and outputs it to the synchronizing code detecting circuits 1A, 1B even in clock interruption in one system.
    クロック抽出回路2は、2系統のクロックがNOR回路21およびAND回路22にそれぞれに入力され、NOR回路21出力側のみ遅延させた後にOR回路24に入力することで、片系のクロック断の場合でもクロックを抽出して同期コード検出回路1A、1Bに出力する。 - 特許庁
  • A data conversion means 33 uses a format conversion table 34a and a master code conversion table 34b, which are decided by a conversion system selection means 32, to convert data that are received through the conversion system selection means 32 and sent from a transmission node 10 into data to be received by a reception node 40.
    データ変換手段33は変換方式選択手段32を通して入力されたデータを、変換方式選択手段32により決定されたフォーマット変換テーブル34a及びマスタコード変換テーブル34bを使用して、送信ノード10が送信したデータを、受信ノード40が受信すべきデータに変換する。 - 特許庁
  • The portable telephone set 1 of the other party of chat detects a control code from the received chat sentence, acquires the component images and the component voices corresponding to the control codes from the correspondence table, displays the plurality of component images and the chat sentence at a display part 50, and issues the chat sentence from a speaker 71 as sounds with the plurality of component voices.
    チャット相手の携帯電話機1は、受信するチャット文から制御コードを検出し、制御コードに対応する部品画像と部品音声を対応テーブルから取得し、複数の部品画像とチャット文を表示部50に表示し、複数の部品音声によりスピーカー71からチャット文を音で発する。 - 特許庁
  • To provide s method and a device for testing paper capable of performing stable measurement and soundness determination even in the case that transmitted light quantity of the paper and illumination of light change due to the effect of disturbance when performing a 100% inspection for the quality of watermark image of the paper on which the watermark image is formed as code information on a paper machine.
    コード情報としてすかし画像が形成された用紙のすかし画像の品質の検査を抄紙機上で全数検査を行う際、外乱の影響により、用紙の透過光量や照明の照度が変化しても安定した測定及び良否判定が行える検査方法及び検査装置を提供する。 - 特許庁
  • The picking assisting system is provided with: a touch tag 120 stuck on a commodity shelf 500 in every commodity and storing a commodity code; an ID card 660 for storing a worker ID; a checking device 620 for determining correctness of the commodity; and a tag antenna 650 for performing human body communication with the touch tag 120 and the ID card 660.
    商品棚500に商品毎に貼付されるものであって商品コードを記憶するタッチタグ120と、作業者IDを記憶するIDカード660と、商品の正当性を判断する照合装置620と、タッチタグ120及びIDカード660と人体通信するタグアンテナ650とを備える。 - 特許庁
  • To provide a transmitter and receiver which determines appropriate weight for subcarrier combination based on an MMSE (minimum mean square errors) rule without increasing the number of reference signals in an MC-CDMA (multicarrier code division multiple access) system, lowers the ratio of the reference signals and can then utilize the MC-CDMA system in an up link.
    MC−CDMA方式において参照信号数を増大させることなく、MMSE規範に基づく適切なサブキャリア合成用のウェイトを決定し、参照信号の比率を低くした上で、MC−CDMA方式を上り回線で利用することができる送信機および受信機を提供する。 - 特許庁
  • An input optical signal with a first wavelength is given to one terminal of the optical limiter amplifier 112, an inverted signal with a second wavelength resulting from inverting a logic code of the input optical signal is given to the other terminal of the optical limiter amplifier 112, and the optical signal with the first wavelength having prescribed lumminous intensity is outputted from the other terminal of the optical limiter amplifier 112.
    光リミッタアンプ112の一端に第1波長の入力光信号を入力し、光リミッタアンプ112の他端に、入力光信号の論理符号を反転した第2波長の反転信号を入力し、光リミッタアンプ112の他端から所定の光強度の第1波長の光信号を出力する。 - 特許庁
  • When an information code P corresponding to the desired nursing care service to be dispatched to the recipient is selected by a reader 2 on a recipient side and is inputted through a public communication channel 9 to a management computer 15, the management computer 15 follows the procedure of dispatching the helper employed by the operator to the recipient.
    受給者側の読取機2により希望する受給者の元に派遣される介護サービスに応じた情報コードPが選択され、公衆通信回線9を介して管理コンピュータ15に入力されると、管理コンピュータ15は、事業者により雇用されているヘルパーを受給者に対して派遣する手続きをとる。 - 特許庁
  • When correction paper on which a transmission ID is printed is read by an optical reading means 12, a transmission ID recognizing means 13 recognizes the transmission ID printed on the correction paper and a reception side address acquiring means 14 acquires an address and a code key on a reception side with reference to a reception side address storing means 11.
    送信IDが印刷された校正紙を光学的読取手段12が読み取ると、送信ID認識手段13が校正紙上に印刷されていた送信IDを認識し、受信側アドレス取得手段14が受信側アドレス記憶手段11を参照して受信側のアドレスおよび暗号キーを取得する。 - 特許庁
  • A digital camera 1 includes an image data generator 100 for imaging an object, and an image processor 203 for acquiring character information from a two-dimensional code contained in a first image obtained by the image data generator 100 and combining in a superimposed manner the obtained character information with a second image obtained by the image data generator 100.
    デジタルカメラ1は、被写体を撮像する画像データ生成部100と、画像データ生成部100で得られた第1の画像に含まれる2次元コードから文字情報を取得し、得られた文字情報を画像データ生成部100で得られた第2の画像に重畳合成する画像処理装置203と、を備える。 - 特許庁
  • This is a high quality character generating device, and based on an original dot matrix reference data, it builds up a dot matrix font (the original dot matrix reference data is a cursive picture data expressed by a dot matrix), and reduces a data quantity by commonly using information on an outline character data, a cursive picture code, an address or the like.
    高品質キャラクター生成装置であって、元のドットマトリックスリファレンスデータに基づいてドットマトリックスフォント(元のドットマトリックスリファレンスデータはドットマトリックスで表現する筆画データである)を組み立て、アウトラインキャラクターデータと筆画コードとアドレスなどの情報を共通に用いることによってデータ量を削減する。 - 特許庁
  • The reading unit 30 includes a full rate carriage 33, a half rate carriage 34, an image forming lens 37, and a CCD image sensor 38 or the like for reading a visible image (document image) on an original, and the full rate carriage 33 is mounted with a CIS 40 for reading an infrared ray image (code image) on the original.
    読み取り装置30は、原稿上の可視画像(文書画像)を読み取るためのフルレートキャリッジ33、ハーフレートキャリッジ34、結像用レンズ37、およびCCDイメージセンサ38等を備えており、フルレートキャリッジ33には、原稿上の赤外画像(コード画像)を読み取るためのCIS40が搭載される。 - 特許庁
  • A device for printing paper reads a group of paper identifiers from a radio IC tag watermarked in paper constituting a group being a printing destination, generates an electronic signature of the group of paper identifiers (step 605), and prints on paper the group of the paper identifiers and the electronic signature as a two-dimensional bar-code together with a picture image (step 606, 607).
    用紙を印刷する装置において,印刷先である組をなす用紙に漉き込まれた無線ICタグから用紙識別子の組を読み込み,用紙識別子の組の電子署名を生成し(ステップ605),用紙識別子の組と電子署名を二次元バーコードとして,画像イメージと共に用紙に印刷する(ステップ606,607)。 - 特許庁
  • The side of the device 2 is provided with a bar code reading part 2a, a calendar clock 2d characteristic to the television terminal device, a microcomputer 2b judging whether information on the term of validity and equipment identification information are valid or not and a power source control part 2j energizing a television set 3 to make it watchable when the card 1 is valid.
    又テレビ端末装置2側にバーコード読み取り部2aと、テレビ端末装置固有のカレンダー時計2dと、有効期間情報と設備識別情報とが有効か否かを判断するマイコン2bと、紙カード1が有効のときテレビ3を通電して視聴可能にする電源制御部2jとを設ける。 - 特許庁
  • To put a code mark indicating information about filling of contents into a container and putting of a lid without confusing a consumer in a combination of the container (2) and the lid (6) wherein the lid is put over a neck (4) of the container after the container is filled with the contents, and a packaging method using the combination.
    容器(2)内に内容物を充填した後に、容器の口頸部(4)に蓋(6)を装着する、容器と蓋との組み合わせ及びかかる組み合わせを使用した包装方法において、消費者を困惑させることなく、容器内への内容物の充填及び蓋の装着に関する情報を示すコードマークを蓋に施す - 特許庁
  • A certain information, for example, a character string code like a URL is divided, arranged and embedded by intentionally setting types of image classes calculated on the basis of a ratio of colors in a mask area in each deformed pattern generated in a procedure manner or by image processing, combination, conversion, or the like and arranged regularly.
    手続き的に、あるいは画像処理・合成・変換等によって生成され、規則的に配置される各変形図柄に対して、マスク領域における色の割合から計算される画像クラスの種類を意図的に設定することにより、ある特定の情報、例えばURLなどの文字列コードを分割、配置して埋め込む。 - 特許庁
  • The encoding device includes a first ECC coder (235) adding parity of an error correction code by interleaving a data column to a plurality of blocks for each m(m≥2) bits, a parity coder (234) adding a parity bit for each plurality of bits, and a second ECC coder (220) performing second error correction encoding of linear encoding using repetition decoding.
    データ列を、m(m≧2)ビット毎に、複数ブロックにインターリーブし、誤り訂正符号のパリティを付加する第1のECC符号器(235)と、複数のビット数毎に、パリティビットを付加するパリティ符号器(234)と、反復復号を使用する線形符号化の第2の誤り訂正符号化を行う第2のECC符号器(220)とを設ける。 - 特許庁
  • Contents information is recorded on a recording medium on which overwrite recording is made possible by forming a contents information recording part that represents desired contents information and a sync code recording part that represents sync codes to provide synchronization when the contents information is read, the sync codes including a sync detector defined by at least two kinds of patterns.
    上書記録が可能な記録媒体に、所望のコンテンツ情報を表わすコンテンツ情報記録部分と、少なくとも2種類のパターンで定義されるシンク検出子を含む、コンテンツ情報の読出しの際に同期をとるシンクコードを表わすシンクコード記録部分と、を形成してコンテンツ情報を記録する。 - 特許庁
<前へ 1 2 .... 846 847 848 849 850 851 852 853 854 .... 893 894 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.