「Control Memory」を含む例文一覧(13720)

<前へ 1 2 .... 189 190 191 192 193 194 195 196 197 .... 274 275 次へ>
  • The vehicle traveling device, when setting operation is performed, decides a traveling speed of a vehicle concerned as the target traveling speed, stores it in a memory as a set traveling speed and starts the driving control of the vehicle.
    車両走行装置は、セット操作が行われると、自車の走行速度を目標走行速度として決定するとともに、設定走行速度としてメモリに記憶して、自車の駆動制御を開始する。 - 特許庁
  • To provide a non-volatile semiconductor memory device and its manufacturing method by which leakage current is suppressed, withstand voltage is improved, and a large capacity can be ensured between a control gate and a floating gate.
    リーク電流を抑制でき、絶縁耐圧を向上でき、かつコントロールゲートとフローティングゲートとの間で大きな容量を確保できる不揮発性半導体記憶装置およびその製造方法を提供する。 - 特許庁
  • Transmission ratio of the troidal continuously variable transmission is set at the geared neutral transmission ratio iv_GN, and a memory of a control unit stores a stop realizing position for realizing the geared neutral transmission ratio iv_GN.
    そして、上記トロイダル型無段変速機の変速比をこのギヤード・ニュートラル変速比iv_GN に設定して、制御器のメモリに、このギヤード・ニュートラル変速比iv_GN を実現する為の停止実現位置を記憶させる。 - 特許庁
  • To operate the writing or rewriting work of a control program without stopping the operation of a controller or each peripheral equipment even when a system is operating, and to improve memory efficiency.
    システム稼働中であっても、制御装置及び各周辺装置の運転を停止させることなく制御プログラムの書き込み又は書き換え作業を行うことができると共に、メモリ効率を向上させること。 - 特許庁
  • In writing operation, by the low data holding power supply control circuit 150, the voltage for the low data holding power supply for the memory cell in a selective column is also controlled to be higher in the degree of 0.1 V than the ground level.
    また、書き込み動作時には、ローデータ保持電源制御回路150により、選択カラムにおけるメモリセルのローデータ保持電源の電圧を接地レベルよりも0.1V程度高い電圧に制御する。 - 特許庁
  • When the second standard memory 2 is not mounted, any jumper is not interposed between the jumper terminals 9a and 9b, and the control terminal of the selector 7 is turned into an 'H' level by a pull-up resistance 8.
    これに対して第2標準メモリ2が装着されていないときには、ジャンパ端子9a,9bにジャンパが介挿されずに、セレクタ7の制御端子がプルアップ抵抗8により「H」レベルとされる。 - 特許庁
  • A control logic 42 compares a video signal in the latest scanning line stored in a line memory 421 with a video signal before one scanning line and selects the data signal line to be short-circuited.
    コントロールロジック42は、ラインメモリ421に格納される最新走査ラインにおける映像信号と1走査ライン前における映像信号とを比較し、短絡すべきデータ信号線を選択する。 - 特許庁
  • To provide a thermal printer printing control device which can print in a page mode in which printing quality is excellent as much as possible in memory size and cope with long-size printing as necessary, in a thermal printer.
    サーマルプリンタにおいて、メモリサイズ的に可能な限り印刷品質の良好なページモードで印刷でき、必要に応じて長尺印刷にも対応できる、サーマルプリンタ印刷制御装置を提供する。 - 特許庁
  • The device includes a switch which is provided at a bit line between a memory cell and a sense amplifier and of which the conductivity varies continuously and freely, and a switch control circuit varying conductivity of the switch in accordance with an access request signal.
    メモリセルとセンスアンプとの間のビット線に設けられて、導通度が連続的に変化自在なスイッチと、アクセス要求信号に応じて該スイッチの導通度を変化せしめるスイッチ制御回路とを含む。 - 特許庁
  • At the time of the permitted timing, the timing control part 161 sends out the image data temporarily held in the memory 162 through an output part 163 and a data bus 101 to an LCD display part 17.
    タイミング制御部161は許可されたタイミングであれば、メモリ162に一時保持している画像データを、出力部163及びデータバス101を介してLCD表示部17に送出する。 - 特許庁
  • A corrective pattern image serving as a pattern image which is produced by reflections within an illuminating optical system or an imaging optical system is stored in the memory of a control circuit for each color, R (red), G (green) and B (blue).
    制御回路のメモリには、照明光学系又は撮像光学系の内部の反射により生ずるパターン画像である補正パターン画像が、R(赤)、G(緑)、B(青)の各色毎に記憶されている。 - 特許庁
  • A battery 100 has a memory 120 on which identification information such as a production number is written, and a remote control unit 10 reads the identification information of the installed battery 100 electrically.
    バッテリ100には製造番号等の識別情報が書き込まれたメモリ120が備えられており、リモコン装置10は装着されているバッテリ100の識別情報を電気的に読み取る。 - 特許庁
  • To provide a game machine which accomplishes a reduction in the burden on the control while diminishing the memory region of the data in the announcement of the win advance notice and in the announcement of the specified aspect advance notice.
    リーチ予告報知と特定態様予告報知とを行なうことについて、データの記憶領域を縮減するとともに、制御負担を軽減することが可能となる遊技機を提供することである。 - 特許庁
  • The nonvolatile storage device provided with a plurality of bit lines 17, a plurality of word lines 18, a plurality of memory cells 15, a plurality of source lines 19, a current source 6, and a voltage control part 14 is used.
    複数のビット線17と複数のワード線18と複数のメモリセル15と複数のソース線19と電流源6と電圧制御部14とを具備する不揮発性記憶装置を用いる。 - 特許庁
  • To provide a memory control device which efficiently manages mobile information, using an internal communication channel, realizes a low-cost monitoring function of the mobile information, has high performance and reliability, and is easy to construct.
    内部通信路を用いて稼動情報を効率よく管理し、性能や信頼性が高く構築が容易で安価に移動情報の監視機能を実現する記憶制御装置を提供する。 - 特許庁
  • To provide a semiconductor memory device in which a copy time of data of twin cells in shifting to a partial mode is shortened and increment of an access time caused by refresh operation is suppressed and to provide its control method.
    パーシャルモード移行時におけるツインセルのデータのコピー時間の短縮化を図り、リフレッシュ動作によるアクセスタイムの増大を抑止する半導体記憶装置及びその制御方法の提供。 - 特許庁
  • A mobile phone 50 receives a call from a caller telephone set, a control section 2 collates the telephone number of the caller telephone set with telephone numbers stored in a permissible telephone number memory 6.
    発呼側の電話機から携帯電話機50に着信があると、制御部2は発呼側の電話機の電話番号と許可電話番号メモリ6に格納されている電話番号との照合を行う。 - 特許庁
  • The message is sent to the first arithmetic control circuit 31 via a terminal device 102, the Internet 103 and a terminal device 100 to update the contents of the message in a preset data memory 33.
    このメッセージは、端末装置102及びインターネット103,端末装置100を介して第1の演算制御回路31に送信して、設定データメモリ33のメッセージ内容を更新できる。 - 特許庁
  • A control section 20 reads, when a loaded optical disk is unknown, a recommended recording strategy from the predetermined area of the loaded optical disk, and reads a correction parameter corresponding to the loaded optical disk from a memory.
    制御部20は、装着光ディスクが未知ディスクの場合、装着光ディスクの所定領域から推奨記録ストラテジを読み取り、装着光ディスクに対応する補正パラメータをメモリから読み取る。 - 特許庁
  • In an operation mode after the completion of the test mode, the control circuit 15 is structured to execute operation based on the new steady-state values stored in the nonvolatile memory 18, and the cycle of the high-frequency pulse signal.
    試験モード終了後の運転モード下では、制御回路15は不揮発性メモリ18に記憶されている新たな定常値と高周波パルス信号の周期に基づいた動作をなすように構成する。 - 特許庁
  • A protection signal is connected to signal latch sections 10 of units 6, 9 by an operation protection switch 8, and writing of control/adjustment data into a nonvolatile memory 2 is prohibited during exchange between units 6, 9.
    動作プロテクトスイッチ8によりユニット6,9の信号ラッチ部10にプロテクト信号を接続して、ユニット6,9の交換中は不揮発性メモリ2への制御・調整データの書込みを禁止する。 - 特許庁
  • When the current communication speed becomes lower than a predetermined threshold value stored in the memory circuit portion 12, a control circuit portion 11 instructs an audio output processing portion 17 to notify a decline in communication speed.
    そして、コントロール回路部11は、現状の通信速度がメモリ回路部12にある所定の閾値よりも低くなると、音声出力処理部17に、通信速度の低下を報知するように指示をする。 - 特許庁
  • An optimum write-in pulse is given to the memory cell 11 from a write-in voltage control means 18 in accordance with values of parameters stored in the storage means 16, and a threshold voltage value Vth is made a target value.
    記憶手段16が記憶したパラメータの値に応じて、書き込み電圧制御手段18から最適な書き込みパルスをメモリセル11に与えて、閾値電圧値Vthを目標とする値にする。 - 特許庁
  • In a stock code memory step, the stock code generated in the stock code generating step is stored by assigning so as to correspond to the stocked article W (S102), in the inventory control device 1.
    入庫符号記憶ステップでは、在庫管理装置1において、入庫符号発生ステップで発生された入庫符号を、入庫される物品Wに対応付けるよう割り当てて記憶する(S102)。 - 特許庁
  • Further, the control circuit 16 calculates and corrects the signal stored in the memory 17, and generates data corresponding to the quantity of the light received by each light receiving element if an object is scanned at a constant speed.
    さらに制御回路13は、メモリ17に蓄積された信号を演算して補正し、対象物上で走査が等速で行われた場合の各受光素子の受光量に対応するデータを生成する。 - 特許庁
  • In the AV apparatus 20, state information of a prescribed item showing an apparatus state of the AV apparatus is associated with a preference channel key of remote control of the display 10 to be stored in a memory part 24.
    AV機器20では、表示装置10のリモコンのお好みチャンネルキーに対して、AV機器の機器状態を示す所定項目の状態情報を関連付けてメモリー部24に記憶しておく。 - 特許庁
  • The gate of the memory cell transistor MT0 is connected to a cell control line CGL, the drain is connected to a bit line BL0 which is a data reading line, and the source is connected to the drain of the select transistor ST0.
    メモリセルトランジスタMT0のゲートはセル制御線CGLと接続され、ドレインはデータ読み出し線であるビット線BL0と接続され、ソースは選択トランジスタST0のドレインと接続されている。 - 特許庁
  • A drive substrate 12, on which a circuit for driving an actuator 9 on the basis of the injection characteristic data at every nozzle, is loaded with an RFIC control part 17 for reading and writing an RFIC memory 10.
    ノズル毎の射出特性データに基づきアクチュエータ9を駆動する回路が実装された駆動基板12にRFICメモリ10を読み書きするRFIC制御部17を搭載する。 - 特許庁
  • A control part 45a of a CPU 45 mounted on the sub-board 17 reads out a set storage value Y (Y: 1-6) stored in a RAM area of a memory 46, and compares the same with the set value X.
    サブ基板17に配されるCPU45の制御部45aでは、メモリ46のRAM領域に記憶された設定記憶値Y(Y:1〜6)を読み出して、設定値Xとの比較を行う。 - 特許庁
  • When the file subject to access by AP 22 is a file 42 operated by an open system OS 4, an input/output control means 21 transfers the channel program to the memory space of the open system OS 4 with an inter-OS data transfer means 3.
    入出力管理手段21は、AP22のアクセス対象ファイルがオープン系OS4配下のファイル42である場合、OS間データ転送手段3を用いてチャネルプログラムを、オープン系OS4のメモリ空間に転送する。 - 特許庁
  • To provide a control device of a refrigerator capable of accurately locating the cause of occurrence of a trouble by storing the records on abnormalities occurred on the refrigerator and the records on remedies taken for the refrigerator in a memory.
    冷凍機に発生した異常の記録や冷凍機に施された処置の記録をメモリに残して故障の発生原因を的確に把握することができる冷凍機の制御装置を提供する。 - 特許庁
  • The facsimile machine is provided with a received data storage control means that allows the memory to store the received facsimile data, which will not print out the data on recording paper, when automatically receiving facsimile data and reducing the power consumption of the facsimile machine configuration.
    ファクシミリデータの自動受信を行う際、構成の電力消費をおさえている場合、受信したファクシミリデータをメモリに格納し、記録紙に印刷しない受信データ格納・制御手段を有する。 - 特許庁
  • In a case where a deletion mode for deleting unnecessary data is set, the CPU causes the memory control unit to perform the second write processing if the capacity of data to be written exceeds a predetermined data capacity.
    CPUは、不要データを消去する消去モードが設定されている場合に書き込み対象データの容量が所定のデータ容量を超えていると、メモリ制御部に第2の書き込み処理を行わせる。 - 特許庁
  • The control part 11 started by power supply of the power generation part 16 reads out the counted value in the memory 13 to transmit it to the terminal 2, and the terminal 2 receives this counted value to record it on a recording paper.
    電源生成部16の電源供給により起動された制御部11は、メモリ13のカウント値を読み出して端末2に送信し、端末2はそのカウント値を受信して記録紙に記録する。 - 特許庁
  • If the light distribution patterns are inputted beforehand to the memory section of the control section 30, the liquid droplets of the light distribution pattern forming material can be discharged onto the light guiding substrate 11 according to the light distribution pattern.
    制御部30の記憶部に配光パターンを予め入力しておけば、この配光パターンにしたがって配光パターン形成材の液滴を導光基板11上へ吐出することができる。 - 特許庁
  • When balls-at-hand data is stored in a memory part 87 during the stop of the timer 130, a control part 80 of the dispensing processor 5 starts clocking of the predetermined time Ts by the timer 130.
    タイマ130が停止しているときに、メモリ部87に持玉データが記憶されている場合には、貸出処理機5の制御部80はタイマ130による所定時間Tsの計時を開始させる。 - 特許庁
  • The control section 10 controls the connection phase of a load required to be turned on such that the number of switching times of respective phases is made uniform based on the information of the number of switching times of respective phases stored in a memory 11.
    制御部10は、メモリ11に記憶された各相の切り替え回数情報をもとにして、各相の切り替え回数が均一になるように、オン要求のある負荷の接続相を制御する。 - 特許庁
  • A data reproduction device 1 monitors a reproduction request and reads designated music data from a data storage memory 3 when a reproduction request is given by the depression of a reproduction key and counts reproduction time by a control part 4 with the reproduction start of music data by a reproduction part 5.
    管理情報格納メモリ2内に,データ格納メモリ3に記憶されている各データ毎の再生可能時間と,上記各データの再生部5による累積再生時間を記憶する。 - 特許庁
  • To provide a charge/discharge control method of an alkaline battery that can avoid overcharging and over-discharging while avoiding a memory effect without conducting a refresh cycle that requires a long time, and a power supply system.
    長時間を要するリフレッシュサイクルを行うことなくメモリー効果を回避しつつ、過充電および過放電をも回避できる、アルカリ蓄電池の充放電制御方法および電源システムを提供する。 - 特許庁
  • First, voltage applied to cells and a voltage applying time are set to first write-in conditions by write-in control section 10, memory cells of the first group are successively selected and write-in and verifying are performed respectively.
    まず、書込制御部10によりセルヘの印加電圧、電圧印加時間を第1の書き込み条件に設定し、第1のグループのメモリセルを順次選択してそれぞれ書き込みとべリファイを行う。 - 特許庁
  • A reference image registration part 40 stores a first subject image by filter switching in a nonvolatile memory 36 beforehand as a reference image the imaging control part 42 when a registration mode is set.
    基準画像登録部40は、登録モードの設定時に、撮像制御部42によりフィルタ切替による第1被写体画像を基準画像として不揮発メモリ36に予め格納している。 - 特許庁
  • Or the device has a system control part 7 which reads the identification number out and copies the identification number to an area that the computer on a computer can reads in a recording area of the memory card 2.
    あるいは、識別番号を読み出してメモリカード2の記録領域内でコンピュータのOSが読み出せる領域に識別番号を複写するシステム制御部7を有するように構成する。 - 特許庁
  • A print control unit 111 overwrites and stores a type of selected printing paper concerning a series of print jobs in a printing paper type memory 113 whenever the performance of the print jobs ends.
    印刷制御部111は、一連の印刷ジョブの実行が終了する度に、印刷用紙種類記憶部113に当該印刷ジョブに係る選択された印刷用紙の種類を上書記憶する。 - 特許庁
  • A composite machine 1 capable of exchanging image information of an original from a plurality of other facsimile machines includes: a display panel 9; an input part 7; a communication part 2; a memory 6; and a control part 8.
    、原稿の画像情報を複数の他のファクシミリ装置から通信可能な複合機1であって、表示パネル9と、入力部7と、通信部2と、メモリ6と、制御部8とを備えている。 - 特許庁
  • In the compression control section 7, a plurality of the compressed data 22-1 to 22-3 outputted from the compression processing section 5 are arranged as one series of data on the basis of specified conditions and stored in a memory 11.
    圧縮制御部7は、圧縮処理部5から出力された複数の圧縮データ22−1〜22−3を、所定の条件に基づいて一つの系列のデータとして並べてメモリ11に格納する。 - 特許庁
  • To provide a period generating device and a control method in the period generating device for increasing the setting time of a period without increasing the capacity of a period memory.
    本発明の課題は、ピリオドメモリの容量を増大せずに、ピリオドの設定時間を増加させることが可能なピリオド発生装置及びピリオド発生装置における制御方法を提供することである。 - 特許庁
  • Moreover, a communication control means 31 for transmitting a measurement result obtained by the means 23 via a communication network 60 may be provided, or the measurement result may be stored in a detachably attached memory 52.
    更に、測定制御手段23で得られた測定の結果を、通信ネットワーク60を介して送信する通信制御装置31を備えていても良いし、着脱可能なメモリ52に記憶しても良い。 - 特許庁
  • To provide on-vehicle electronic equipment capable of making an on-vehicle computer control the equipment by connecting a number of the equipment to the on-vehicle computer even if the memory capacity of the on-vehicle computer is not so largely increased.
    車載用コンピュータのメモリ容量をあまり大きくしなくても車載用コンピュータに多くの機器を接続して車載用コンピュータに制御させることができる車載用電子機器を提供する。 - 特許庁
  • A communication control circuit 11 is provided where an image is down-loaded from a service provider using a specified protocol through a communication circuit 20, which is saved in an image memory 7 as a call hold image.
    通信回線20を介しサービスプロバイダから所定のプロトコルにより画像をダウンロードし、画像メモリ7に通話保留画像として保存する通信制御回路11を備えたことを特徴とする。 - 特許庁
  • First, necessary parameters for irradiation of charged particle beam are found for every beam energy by operating a beam adjusting test in advance, then, are stored as a parameter file for a high frequency signal in a memory of a control device.
    まず、事前に、荷電粒子ビームの出射に必要なパラメータを、ビームエネルギー毎に、ビーム調整試験を行って求め、制御装置内のメモリに高周波信号用パラメータファイルとして格納しておく。 - 特許庁
<前へ 1 2 .... 189 190 191 192 193 194 195 196 197 .... 274 275 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.