Code Listing3.2: Selecting necessary filesystems コード表示3.2: Selecting necessary file systems - Gentoo Linux
Filesystems ファイルシステム - FreeBSD
Filesystems --Network FileSystems --* SMB file system support (to mount Windows shares etc.)* CIFS support (advanced network file system for Samba, Windows and other CIFS compliant servers)
これだけです。 - Gentoo Linux
Unicode, Kernel and FileSystems Unicode, カーネルとファイルシステム - FreeBSD
capability) is required to mount filesystems.
ケーパビリティ) が必要である。 - JM
Don't forget to check that the filesystems match your installation. 例を以下に示します。 - Gentoo Linux
18.13 Network, Memory, and File-Backed FileSystems 15.10. ネットワーク、メモリ、そしてファイルベースのファイルシステム - FreeBSD
Curently, only ext2, ext3, and ext4 support returning the file type in d_type . On other filesystems, this field is always set to DT_UNKNOWN .
ファイルタイプは不明である。 - JM
Filesystems ---Pseudo filesystems ---[*] /proc file system support[*] Virtual memory file system support (former shm fs)
コード表示2.6:自動でdevfsdをマウントしてはいけません - Gentoo Linux
3.6 Mounting and Unmounting FileSystems 3.4. ファイルシステムのマウントとアンマウント - FreeBSD
The kernel option is enabled in the kernel configuration under File systems-Quota support. kernelの設定でkernelオプションのFile systems-Quota supportにある設定を有効にします。 - Gentoo Linux
FreeBSD supports a variety of other filesystems.
FreeBSD は System-V スタイルの IPC をサポートします。 - FreeBSD
If more than one filesystems have the same passno then fsck(8) will attempt to check filesystems in parallel if possible.
他のファイルシステムの passno は 1以上に設定してください。 - FreeBSD
FILE SHARING SYSTEM, AND FILE TRANSFER METHOD BETWEEN FILE SHARING SYSTEMS ファイル共有システム及びファイル共有装置間のファイル移行方法 - 特許庁
What are the limits for FFS filesystems?
1.28. ffs ファイルシステムの大きさの制限は? - FreeBSD
FreeBSD also supports network filesystems such as NFS (see mount_nfs(8) ), NetWare (see mount_nwfs(8) ), and Microsoft-style SMB filesystems (see mount_smbfs(8) ).
/usr/src/usr.sbin/sendmail/cfディレクトリの中にある設定ファイルを使用してください。 - FreeBSD
domain name, Things You Have to Do Only Once DOS, Prepare the Boot Media, BIOS Drive Numbering, Kernel and FileSystems DOS, カーネルとファイルシステム - FreeBSD
The utmp file is found various places on various systems, such as /etc/utmp ,
utmp ファイルは様々なシステムで/etc/utmp , - JM
9.7. Can I mount other foreign filesystems under FreeBSD?9.8.
7.21. FreeBSD は System V の IPCプリミティブをサポートしますか? - FreeBSD
Use newfs to re-create the filesystems.
newfs を使用してファイルシステムを作り直します。 - FreeBSD
Mount all the filesystems listed in /etc/fstab.
/etc/fstab にある全てのファイルシステムをマウントします。 - FreeBSD
Note: You will find some of the mentioned options under Pseudofilesystems which is a subpart of Filesystems.
注意: File systemsの下位項目であるPseudo filesystemsの下で前述のオプションのいくつかを見つけることができます。 - Gentoo Linux
/proc/mounts Before kernel 2.4.19, this file was a list of all the filesystems currently mounted on the system.
/proc/mounts現在システムにマウントされている全てのファイルシステムのリスト。 - JM
Mount the freshly created filesystems on /mnt/gentoo.
新しく作成したファイルシステムを/mnt/gentooにマウントします。 - Gentoo Linux
Names are not truncated on systems which do not have a limit on file name
ファイル名の長さに制限がないシステムでは、 - JM
On many systems the file is actually truncated.
多くのシステムではファイルは実際に切り詰められる。 - JM
This determines the order in which filesystems should be checked.
これはファイルシステムをチェックする順番を決めます。 - FreeBSD
Securing the kernel core, raw devices, and filesystems.
カーネルのコア、raw デバイス、ファイルシステムの安全性を 高める。 - FreeBSD
14.3.5 Securing the Kernel Core, Raw Devices, and Filesystems 14.3.5. カーネルのコア、rawデバイス、ファイルシステムの安全性を 高める - FreeBSD
# nano -w /etc/exports# /etc/exports: NFS filesystems being exported. See exports(5)./diskless/eta eta(rw,sync,no_root_squash)
hostsファイルの更新:これは重要な作業です。 - Gentoo Linux
Use reserved space on ext2 filesystems; *
ext2 ファイルシステム上の予約されている領域を使用する。 - JM
cannot span filesystems.
でファイル・システムを超えてハード・リンクを作成することはできない。 - JM
For some filesystems, inodes are dynamically allocated.
ファイルシステムの中には、inode を動的に確保するものもある。 - JM
Forcibly unmounting filesystems might crash the computer or damage data on the file system.
オプション -a と -Aはマウントされているファイルシステムすべてをアンマウントするのに使います。 - FreeBSD
Stale file handle (POSIX.1) This error can occur for NFS and for other filesystems ESTRPIPE
ファイルハンドルが古い状態になっている (POSIX.1)NFS や他のファイルシステムで起こりうる。 ESTRPIPE - JM
/proc/sys/fs/super-nr This file contains the number of filesystems currently mounted.
/proc/sys/fs/super-nrこのファイルには現在マウントされているファイルシステム数が書かれている。 - JM
Just add the following to your configuration file /boot/grub/menu.lst (or /boot/grub/grub.conf in some systems, e.g.
標準的な .mc ファイルは次のようになります。 Your version number - FreeBSD
odc The old (POSIX.1) portable format. newc The new (SVR4) portable format, which supports filesystems having more than 65536 i-nodes.
ほとんど使われません。 odcold ASCII(old (POSIX.1) portable)フォーマットです。 - JM
semantics are deliberately violated on NFS filesystems which have UID mapping enabled.
方式は UID マッピングを使用したNFS ファイル・システムを侵害する。 - JM
Note that not all filesystems are POSIX conforming.
全てのファイル・システムが POSIX 準拠ではない点に注意すること。 - JM
If you do not see the soft-updates option then you will need to activate it using the tunefs(8) (for existing file systems) or newfs(8) (for new file systems) commands.
soft-updates オプションが見当たらなければ、 tunefs(8)か、新規のファイルシステムについては newfs(8) で有効にする必要があります。 - FreeBSD
A mount point is a directory where additional filesystems can be grafted onto a parent file system (usually the root file system). This is further described in Section 3.5.
マウントポイントとはルートファイルシステムに存在する、追加のファイルシステムと接続するためのディレクトリのことです。 - FreeBSD
Further, the file system management part 48 manages filesystems 154a and 154b on the file server, divides a function of external linking with other file system and the insides of the filesystems by directory trees, and performs file use amount and file generation number management independently. また、ファイルシステム管理部48は、ファイルサーバ上のファイルシステム154a、154bを管理し、他ファイルシステムへの外部リンク機能とファイルシステム内を幾つかのディレクトリツリー毎に分割し、独立にファイル利用量・ファイル作成数管理行う。 - 特許庁
The mount(8) command is what is ultimately used to mount filesystems.
mount(8)コマンドは、 ファイルシステムをマウントするために使われるものです。 - FreeBSD
On many systems a routine of this name reads from the file /etc/hosts .
多くのシステムでは、この名前のルーチンはファイル/etc/hostsを読み込む。 - JM
and the number of currently configured filesystems for option 3 .
オプション3 は現在設定されているファイル・システムの数を返す。 - JM
Such filesystems will return the current number of free inodes.
このようなファイルシステムは、現在解放されている inode の数を返す。 - JM
The metadata may be associated with an expected source for the document file in, for example, filing systems, messaging systems, workflow systems, and document scanning systems. メタデータは、ファイリングシステム、メッセージ交換システム、ワークフローシステム、および文書スキャン・システム等、文書ファイル用に見込まれるデータ源に関連付けることができる。 - 特許庁
To provide a file management program, a file management apparatus and a file management method that move files between filesystems while an application is kept in operation. アプリケーションを稼動させたまま、ファイルシステム間のファイルの移動を行うファイル管理プログラム、ファイル管理装置、ファイル管理方法を提供する。 - 特許庁
Copyright (c) 2001 Robert Kiesling. Copyright (c) 2002, 2003 David Merrill. The contents of this document are licensed under the GNU Free Documentation License. Copyright (C) 1999 JM Project All rights reserved.