「Is Using」を含む例文一覧(49967)

<前へ 1 2 .... 409 410 411 412 413 414 415 416 417 .... 999 1000 次へ>
  • Area base matching is operated by using a detected luminance value y, so that a corresponding point nb can be detected in a step S104.
    ステップS104において、検出された輝度値yを利用して、エリアベースマッチングが行われ、対応点nbが検出される。 - 特許庁
  • Display is performed by using a combination of a tacky adhesive film having a function to prevent the alteration and a tacky adhesive film having a repeeling function.
    改竄防止機能を備えた粘着フィルムと再剥離機能を備えた粘着フィルムの組み合わせを用いて掲出する。 - 特許庁
  • To control premises equipment of a factory, a building, etc., by using a PHS terminal which is on the market at a low cost and provided with private telephone function.
    構内電話機能付きの市販の安価なPHS端末を用いて工場,ビル等の構内設備の制御を行う。 - 特許庁
  • The subtraction is carried out by using a subtracted point table showing the correspondence relation between total singing rates and subtracted points (meaning a value to be subtracted).
    この減点は全体歌唱率と減点(減点すべき値の意味)との対応関係を示す減点テーブルを用いて行う。 - 特許庁
  • A preparative LC (liquid chromatography) using an LC/MS (mass spectrometry) is used to collect a micro amount of sample liquid into each recessed part of a sample slide 21.
    サンプルスライド21の各凹部に微量の試料液を採取するために、LC/MSを利用した分取LCを用いる。 - 特許庁
  • Leak diagnosis of the channel selector is performed with using cyclic change of air fuel ratio due to air fuel ratio feed back control at a close position.
    流路切換弁の漏洩診断は、閉位置において、空燃比フィードバック制御による空燃比の周期変化を利用して行う。 - 特許庁
  • The adhesive 4 is adhered to the underwear side cloth 2 by tearing off one surface side releasing paper, for example, by using a double-sided adhesive sheet.
    接着材4は例えば両面接着シートを用い、一面側の剥離紙を剥して肌着側布2に接着する。 - 特許庁
  • A double lock type locking system to further make it difficult to illegally unlock the lock by using above picking protective lock is also provided.
    さらに、上記のピッキング防止錠を用いて、不正解錠を一層困難にするダブルロック式の施錠システムを提案した。 - 特許庁
  • To provide an image forming apparatus capable of enhancing the productivity, when using a large capacity storage device, the data transfer speed of which is slower than that of a scanner and a printer.
    データ転送速度がスキャナやプリンタより遅い大容量記憶装置を用いた場合に生産性を向上させる。 - 特許庁
  • The plasma treatment equipment can be realized by an equivalent circuit, and each parameter of the equivalent circuit is computed by using the result of the measurement.
    プラズマ処理装置は等価回路によって表現でき、この計測結果を用いて等価回路の各パラメータを算出する。 - 特許庁
  • To form an SDB which is excellent in breakdown strength by using a metal such as tungsten, which can be buried in a fine contact hole.
    微細なコンタクトホールに埋め込むことが可能な金属たとえばタングステンを用いて、耐圧に優れたSDBを形成する。 - 特許庁
  • By using borosilicate glass, containing an alkaline constituent of 6.5 wt.% or less for the material of glass substrates 11 and 21, higher effectiveness is obtained.
    また、ガラス基板11,21の材料として、アルカリ成分が6.5重量%以下の硼硅酸ガラスを用いれば、より効果がある。 - 特許庁
  • By configuring the planar speaker, a screen and an advertising banner, the heat-radiating effect thereof is improved by using the transducer 11.
    同トランスデューサ11を用いて、平面スピーカ、スクリーン及び広告バナーを構成することで、それらの放熱効果を高めた。 - 特許庁
  • A component obtained from the source OS and necessary for supporting the selected feature is identified and selected by using the dependency model.
    依存性モデルを利用して、選択されたフィーチャーをサポートするのに必要なソースOSからのコンポーネントを識別して選択する。 - 特許庁
  • A solution convertible to a charge generating layer is continuously applied using an applying means disposed in a position away from a charge transport layer.
    電荷発生層となる溶液を、電荷輸送層から離間した位置に配備された塗布手段を用いて連続的に塗布する。 - 特許庁
  • To provide a film attaching method that reduces production cost and is easy to retry, and to provide a screen of rear projection television using the film attaching method.
    生産コストを削減でき、且つやり直しをしやすいフィルム付着方法及び背面投影型テレビスクリーンを提供する。 - 特許庁
  • In the buffer section, the depth of back filling using nonfreezing materials is reduced from the starting point B toward the end point C.
    緩衝区間では、非凍上性材料を用いた埋め戻しの深さを起点Bから終点Cに向かって減少させる。 - 特許庁
  • Thus, in the terminal 1b, the received enciphered data A" is deciphered by using (b)'s secret key to obtain the data S.
    これにより、端末1bにおいては、受信した暗号データA”から乙の暗号鍵R’を用いるとデータSが復号化される。 - 特許庁
  • To provide a pressure sensor, that can be reduced in cost by using normal silicon processes, can reduce the cost of manufacturing, and furthermore is low-cost and has high-accuracy.
    製造コストを削減でき、通常のシリコンプロセスで形成でき、さらに高精度且つ安価な圧力センサーを提供する。 - 特許庁
  • To improve the shock resistance of a strap-attaching member and to improve the design when a watch is carried without using a strap.
    時計において、バンド取付部材の耐衝撃性を向上させ、バンドを使用しないで携帯するときのデザインを向上させる。 - 特許庁
  • To provide an image forming device and an image forming method in which an effect is surely improved by using a linked image formation mode.
    連結画像形成モードの使用によって確実に効果があがる画像形成装置および画像形成方法を提供する。 - 特許庁
  • Ultrasonic inspection due to a transmission method using an ultrasonic sensor 2B for transmission and an ultrasonic sensor 2A for detection is carried out.
    超音波センサ2Bを送信用とし、超音波センサ2Aを受信用とする透過法による超音波検査が実施される。 - 特許庁
  • This method comprises infiltrating an NOx sorbent into a support and infiltrating a noble metal into the support by using a solution of the noble metal in a solvent in which the infiltrated NOx sorbent is insoluble.
    担体に先ずNO_x 吸蔵材を担持し、次いで担持されたNO_x 吸蔵材が溶解しない溶媒を用いて貴金属を担持する。 - 特許庁
  • This invention is applied to a portable terminal which loads a non-contact IC card and performs payment by using the non-contact IC card.
    本発明は、非接触ICカードを搭載し、該非接触ICカードを利用して決済を行う携帯端末に適用される。 - 特許庁
  • The pads 14 are right-octagonal, and their outer periphery is subjected to over-resist by a specified width by using a solder resist 18.
    各々のパッド14は、正8角形で形成され、その外周部がソルダーレジスト18により所定幅だけオーバーレジストされている。 - 特許庁
  • To provide a substrate for reaction chip, which can solve such a problem that the waste of a reaction chip (DNA chip, etc.), using a glass or silicon as substrate is difficult to be incinerated.
    ガラスやシリコンを基板とした反応チップ(DNAチップ等)の廃棄物を焼却処理することは困難である。 - 特許庁
  • The display and the like necessary for selling the article is displayed in the easily viewable state using the planar part of the storage case.
    そして収納ケースの平板状部を利用することで、商品販売上必要な表示物等を見やすく表示できる。 - 特許庁
  • To indicate an intended function as accurately as possible without using an operational member even if an eyepiece finder is in use.
    接眼ファインダの使用中であっても、操作部材を用いることなく意図する機能を可及的正確に指示できるようにする。 - 特許庁
  • The method for measuring the phosphorylated CDC48 is also provided, involving using the above antibody in a Western blotting method, an immunohistochemically dyeing method, etc.
    ウエスタンブロット法、免疫組織化学染色等にこの抗体を用いることによってリン酸化CDC48測定法を得た。 - 特許庁
  • By this constitution, the replacement of an LCD 6 is not required when changing the meter size, to thereby improve using convenience.
    この構成により、メータ号数を変更するときにLCD6の交換を不要とし、使用利便性を向上させることができる。 - 特許庁
  • When a center 3 side, using a B channel communication system calls on a terminal side, first, communication is performed by a D channel.
    Bチャネル通信方式を用いたセンタ3側から端末側を呼び出す場合、まず、Dチャネルによって通信が行われる。 - 特許庁
  • To start an engine using electric power of an auxiliary battery when electric power of a main battery is used up, in a hybrid vehicle.
    ハイブリッド車両において、メインバッテリの電力が使い果たされた場合に、補機バッテリの電力を用いてエンジンを始動させる - 特許庁
  • After using the chemical 2, the neck part 6 is fitted into the cover part 7 in a state in which the base 4 and the knob part 8 cross orthogonally.
    薬液2を使用後、ベース4と摘み部8とが垂直に交差した状態で、蓋部7に首部6がはめ込まれる。 - 特許庁
  • When observing an image with high magnification using a TV camera 15, a fluorescent screen 13 is released as shown by the dotted lines in figure 1.
    TVカメラ15を用いて高倍率で像を観察する場合、図1の点線で示すように、蛍光板13は開放される。 - 特許庁
  • The transparent conductive film is produced by using the sputtering target.
    この透明導電膜を画素電極として利用することによって、ソース電極7等との接触抵抗を小さく抑えることができる。 - 特許庁
  • To provide a liquid crystal display device capable of preventing defective display when a power source is turned off with respect to the liquid crystal display device using a holding capacitor line driving system.
    保持容量線駆動方式を用いた液晶表示装置において、電源オフ時の表示不良を防止する。 - 特許庁
  • For example, an electric signal, which synchronizes with sound generated at random, is made to transmit and amplify by using a sound collector, such as a condenser microphone.
    例えばコンデンサマイク等の集音器を用いて、ランダムに発生する音に同調する電気信号を発信させ、増幅させる。 - 特許庁
  • In a lighting system for a display board using an optical fiber, an angular rod 6 is provided at the light discharging end 5 of an optical fiber flux.
    光ファイバーを用いた表示板の照明装置において、光ファイバー束の光出射端5に角形ロッド6を設ける。 - 特許庁
  • The device is comprised of an oxymetry function part using red light and infrared light and a comparator.
    本特許の請求範囲はSpO2を用いた居眠り判定法とこの判定法を採用した居眠り判定装置とを含む。 - 特許庁
  • To provide a laminated transformer which is suitably comprised by using a material having high magnetic permeability, and to provide a manufacturing method therefor.
    透磁率の高い材料を用いて好適に構成された積層トランス部品及びその製造方法を提供すること。 - 特許庁
  • When the type of the external communication device is determined, a communication control part controls the communication of the communication device using the information.
    外部の通信装置の種別を判定したら、この情報を用いて通信制御部が該通信装置の通信を制御する。 - 特許庁
  • To provide conductive paste having superior printing properties and a laminated ceramic electronic part which is made uniform in characteristics by using the same.
    印刷性に優れた導電性ペースト、及びそれを用いて、特性バラツキの抑制された積層セラミック電子部品を提供する。 - 特許庁
  • When one of a plurality of W encoders has a malfunction, controlling is carried out by using another normal encoder.
    Wエンコーダーにおいて、片方のエンコーダーに異常が生じた場合は、もう片方の正常なエンコーダーによる制御を行なう。 - 特許庁
  • Moreover, the spring member 8, since it is of a simple structure as shown in the figure, can be downsized in comparison with a case using a coil spring or the like.
    また、バネ部材8は図示のような簡単な構成であるため、コイルスプリング等を用いる場合に比べてコンパクト化できる。 - 特許庁
  • The temperature of a reservoir 12 for holding the fluid to be dispensed is kept constant by using a water jacket 100 to make sure that characteristics of the fluid such as viscosity and density are kept uniformly.
    分配前の流体を保つ槽12は、水ジャケット100を使用することにより、一定温度に維持される。 - 特許庁
  • An address array direction in the name book data using the address as a base is predicted based on the character direction of the address (S121).
    この宛名の文字方向に基づいて該宛名を基点とした名簿データにおける宛名配列方向を予測する(S121)。 - 特許庁
  • A spray painting body piece 13b is loaded to the inside of the round hole 13a of a spray painting body 13 by using adhesive or the like.
    接着剤等を用いて、吹き付け塗装体13の丸孔13a内に吹き付け塗装体片13bを装着する。 - 特許庁
  • Each of the parts 611 and 612 comprises two layers and the outside layer thereof is formed by using a knitted fabric while the inside layer thereof comprises a double-side towel fabric.
    パーツ611,612は、2層からなり、外側の層はメリヤス地を用い、内側の層は両面タオル地を用いている。 - 特許庁
  • Especially, the method is characterized in that the method comprises detecting an abnormal yeast having proliferation disorder or fermentation disorder by using the high-temperature resistance as the indicator.
    特に、高温耐性を指標にして増殖不良または発酵不良異常酵母を検出することを特徴とする。 - 特許庁
  • The molded product using the resin composition or the molded product filled with the resin composition itself is provided.
    該樹脂組成物を用いた成形体又は該樹脂組成物自体を装填した成形体を提供することを目的とする。 - 特許庁
<前へ 1 2 .... 409 410 411 412 413 414 415 416 417 .... 999 1000 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.