「Normal Is」を含む例文一覧(20760)

<前へ 1 2 .... 54 55 56 57 58 59 60 61 62 .... 415 416 次へ>
  • On the basis of overlaps of internal cells between corresponding duplex circuits, a report 27 is produced which indicates whether the duplex circuit is normal or not.
    対応する二重化回路間の内部セルの重複に基づいて、二重化回路が正常か否かを示すレポート27を生成する。 - 特許庁
  • When the SB is won in the normal game or the RT game, control is performed to carry out the SB game in the subsequent game.
    一方、通常遊技又はRT遊技においてSBが入賞したときは次遊技でSB遊技を実行するように制御する。 - 特許庁
  • Then, revolving periods are compared again and a speed reduction point is set on the basis of the areas while assuming the rotation of the reels 2 and 3 is normal.
    再び、回転周期の比較を行い、リール2、3の回転が正常ならば、各面積に基づいて減速ポイントを設定する。 - 特許庁
  • When a video scope is connected to a processor, main configuration data are read from a memory and whether or not the data are normal is judged (S103).
    ビデオスコープがプロセッサに接続されると、メインコンフィグレーションデータをメモリから読み出し、データが正常であるか否かを判断する(S103)。 - 特許庁
  • The C-MOS buffer Q1 is not used for operation as normal signal processing but is used for electric charge, namely, energy transfer.
    C−MOSバッファQ1は、通常の信号処理としての動作ではなく、電荷すなわちエネルギを転送する使い方をされている。 - 特許庁
  • The arithmetic result is compared with the arithmetic processing result by the standby system computer 3 to determine whether the active system computer 2 is normal or abnormal.
    また,その演算結果を待機系計算機3の演算処理結果と比較し,稼動系計算機2が異常でないか判断する。 - 特許庁
  • When an operation disk part is rotated at the same reference rotating speed and in the same reference rotating direction as a disk part, normal reproduction is performed.
    操作円盤部が円盤部と同じ基準回転速度及び基準回転方向で回転しているとき、通常再生をする。 - 特許庁
  • Then, a similar operation is repeated and the setting of the normal voting form to the standby position is completed before the switch operation of the issuance.
    そして、同様の動作を繰り返し、交付のスイッチ操作の前に正常な投票用紙の待機位置へのセットを完了させる。 - 特許庁
  • During the probability variation time-shortening state, probability with which a normal winning or a jackpot is determined is higher than that in the ordinary state.
    確率変動時短状態中は、普通当たりと判定される確率および大当たりと判定される確率が、通常よりも高い。 - 特許庁
  • When the economy mode switch 214 is operated, the power supply is suppressed as an economy mode below the power supply during the normal use.
    エコモードスイッチ214が操作された場合には、エコモードとして、投入する電力を通常使用時より低く抑えて空調する。 - 特許庁
  • The CPU 10 extracts and displays only data in which the read availability information is normal, when a search result is displayed on a touch panel 141.
    CPU10は、タッチパネル141に検索結果を表示する際に、読出可否情報が正常のデータのみを抽出して表示する。 - 特許庁
  • The curable resin 4 is injected into a more inner position in the cylinder that is the element base 2 than a position of the piezoelectric element 3 with respect to the principal surface normal line direction, and cured.
    硬化樹脂3は、素子ベース2における圧電素子3よりも主面法線方向の筒内に注入硬化される。 - 特許庁
  • Principal component of EES data of the failed device is analyzed, and a principal component space for distinguishing a normal state from a failed one is obtained.
    トラブル装置のEESデータを主成分分析し、正常状態とトラブル状態とを互いに区分する主成分空間を求める。 - 特許庁
  • Since the conversion reaction proceeds under a normal pressure at a relatively low temp., the structure of the device is simplified and the maintenance thereof is facilitated.
    この変換反応は常圧、比較的低温で進行するので、装置の構造が簡単になり、維持管理も容易にすることができる。 - 特許庁
  • The metal lance 38 is formed slanted rising backward in a normal state, and at the same time, is enabled to elastically deform downward.
    金属ランス38は、自然状態では後ろ上がり状の斜め姿勢に形成されるとともに下方へ弾性変形可能とされている。 - 特許庁
  • Whether an AE water reducing agent is contained or not as an admixture, in normal concrete having a slump flow of 15 to 21 cm is confirmed.
    スランプが15cm〜21cmになる普通コンクリートに混和剤としてAE減水剤が含まれているか否かを確認する。 - 特許庁
  • When the screw is rotated in the normal direction to feed the resin forward, the check ring 6 is separated from the front end part of the screw 1.
    スクリュ1を順方向に回転させて樹脂を前方に送り出すときには、チェックリング6がスクリュ1の前端部から離れる。 - 特許庁
  • When the combination of "BONUS7" is won (S16:YES) as a result of the drawing processing (S14), it is made possible to execute a normal bonus game (S17).
    抽選処理(S14)の結果、「BONUS7」の役へ当選すると(S16:YES)、通常ボーナスゲーム(S17)を実行とする。 - 特許庁
  • During the recording of audio data in a CD-R, a laser power, various servos or the like is monitored to determine whether a recording is normal or not.
    CD−Rへのオーディオデータの記録中に、レーザパワーや各種サーボ等をモニタして記録状態が正常か否かを判断する。 - 特許庁
  • Non-insertion of an IC card 4 is detected by an IC card detection part 11 and normal inslallation is detected by an IC card interface 10.
    また、ICカード検知部11によりICカード4の未挿入を検知し、ICカードインターフェース10により正常装着を検知する。 - 特許庁
  • In normal time, the water introducing port 2 of the head main body 4 is closed by a second valve 35 and the generation of the dead water inside the head main body 4 is prevented.
    平常時、ヘッド本体4の導水口2を第2バルブ35で塞いでヘッド本体4内での死水の発生を防ぐ。 - 特許庁
  • The resin composition contains: a cationic polymerization compound which is crystalline and is solid at normal temperatures; and a photo cationic polymerization initiator.
    結晶性を有し常温で固体のカチオン重合性の化合物と、光カチオン重合開始剤と、を含むナノインプリント用樹脂組成物。 - 特許庁
  • The grand piano is a normal acoustic grand piano, and a projection 12Ba is formed only at the tip of a small jack 12B.
    ここで、このグランドピアノは通常のアコースティックグランドピアノであり、ジャック小12Bにはその先端部のみに突起12Baが設けられている。 - 特許庁
  • In another structural example, a probe is placed in the inhibited space to transmit a radio wave from a mobile phone, and a normal electric field response is found.
    別の態様では、禁止領域にプローブを設け、携帯電話機から電波を発信し、定常的な電界応答が求められる。 - 特許庁
  • A value of [P(100)/2+α] as a reference value for judging the laser device is in a normal characteristic is obtained by using the quantity of the light P(100).
    光量P(100)を用いて、正常特性であるかを判定するための基準値として、[P(100)/2+α]を求める。 - 特許庁
  • To provide a technique capable of expressing SurA protein in a state in which a heteroprotein is solubilized and in a state in which a normal stereostructure is retained.
    異種タンパク質を可溶化した状態で、かつ正常な立体構造を保持した状態で発現させうる技術を提供する。 - 特許庁
  • The ultra-short variation pattern is set so that the number of symbols moving on a valid line during variation is smaller than normal variation.
    超短縮変動パターンは、変動中に有効ラインを移動する図柄の数が通常の変動よりも少なくなるよう設けられる。 - 特許庁
  • Thus, the used film 124 is automatically reproduced with a normal image on the video monitor 119 regardless of whether it is a negative film or a positive film.
    これにより、使用フイルム124がネガフイルムかポジフイルムかにかかわらず自動的に正常な画像でビデオモニタ119に再生される。 - 特許庁
  • To provide a pachinko machine wherein it is easy to confirm whether electrical connection between a plurality of board apparatuses and a connector member is normal or abnormal.
    複数の基板装置とコネクタ部材との電気的な接続が正常か異常かを容易に確認できるパチンコ遊技機を提供する。 - 特許庁
  • In addition, when the temperature of the cold-cathode tube 10a is deviated from the normal temperature range so as to become an abnormally high temperature, the polyswitch 120 is turned off.
    また、冷陰極管10aの温度が正常温度範囲から外れて異常高温になると、ポリスイッチ120はオフする。 - 特許庁
  • When an application is used, a waiting time before a screen saver is displayed can be set a little longer than that in a normal time.
    特定のアプリケーションを使用している時には、スクリーンセーバーが表示されるまでの待ち時間を通常より長めに設定できる。 - 特許庁
  • The vibration suppression mode is continued for a predetermined set period when engine speed is raised and then, returned to the normal mode (S18).
    振動抑制モードは、エンジン回転数が立ち上がる所定の設定期間の間継続し、その後通常モードに戻される(S18)。 - 特許庁
  • If a feedback loop is not contained in the connection information in the check, a control processing code in normal correspondence is automatically generated (S4).
    当該チェックで接続情報にフィードバックループが含まれていなければ、通常対応による制御処理コードを自動生成する(S4)。 - 特許庁
  • Immediately after attachment, the resistance value of an NTC thermistor 11 is large, because the temperature of the LED module 6 is considered to be at normal level.
    取り付け直後は、LEDモジュール6の温度は常温にあると考えられるので、NTCサーミスタ11の抵抗値は大きい。 - 特許庁
  • The vacancy Le is formed by extracting a normal substrate Wa from the leading lot L1, when a preferential substrate Wa is generated.
    空席Leは、優先基板Waが生じた場合に、先頭ロットL1 から通常基板Wを抜き出すことによって設ける。 - 特許庁
  • Furthermore, in the case where a continuous operation time of the parts testing device is longer than a predetermined time, a normal temperature returning processing is carried out automatically.
    または、部品試験装置の連続運転時間が所定時間以上である場合に、自動的に常温復帰処理を行う。 - 特許庁
  • A p-type deep layer 10 is formed and extended in the direction of a normal for a part where a channel region is constituted in the side surface of a trench 6.
    トレンチ6の側面のうちチャネル領域が構成される部分に対する法線方向にp型ディープ層10を延設する。 - 特許庁
  • In the hydraulic control device for an automatic transmission, a linear solenoid valve SLC3 is constituted in a normal open type so that it outputs an application pressure for a clutch C-3 even if it is turned OFF.
    リニアソレノイドバルブSLC3をノーマルオープンタイプで構成し、非通電となってもクラッチC−3の係合圧を出力する。 - 特許庁
  • When the visitor enters a site, ticket data are read from the IC ticket, and the visitor is permitted to enter the site when it is confirmed that this ticket data are normal.
    入場時には、ICチケットからチケットデータを読み取り、正当なチケットデータであることが確認されれば入場が許可される。 - 特許庁
  • The process proceeds to a step 240 when a return code RC is 0 (normal state), or to a step 245 when the RC is 1 (quick brake state).
    そして、リターンコードRCが0(通常状態)ならばステップ240へ、RC=1(急制動状態)ならばステップ245へ処理を移す。 - 特許庁
  • A failure determination is performed without affecting normal operation of the engine since the failure determination is carried out immediately before the engine starts.
    エンジンの始動開始直前であるため、エンジンの通常の運転に影響を与えることなく、故障判定を行うことができる。 - 特許庁
  • After the gain is raised until resonance sound arises in the gain adjusting mode, it is changed to the normal use mode, and thereby, an appropriate control gain can be set.
    ゲイン調節モードで共振音が生じるまでゲインを上げた後、通常使用モードとすると、適切な制御ゲインを設定できる。 - 特許庁
  • To provide a motor controller which is miniaturized in device scale while suppressing manufacturing cost in a state where normal control operation is secured.
    正常な制御動作を担保した状態で、製造コストを抑制しつつ、装置規模を小型化したモータ制御装置を提供する。 - 特許庁
  • Also, the active carbon filter 4 is arranged on the upstream side of the ventilation path 3 and the normal temperature catalyst filter 5 is arranged on the downstream side of the ventilation path 3.
    また、活性炭フィルタ4を通風路3の上流側に、常温触媒フィルタ5を通風路3の下流側に配置する。 - 特許庁
  • When the interruption is detected, the buffer control circuit 135 executes the switching to the other system, and the normal system clock 132 is outputted.
    断が検出されたときにはバッファ制御回路135が他系への切り替えを行わせ、正常なシステムクロック132を出力させる。 - 特許庁
  • Different interpolation frame images are generated in the case that input video data is in a normal reproduction mode and in the case that the input video data is in the special reproduction mode.
    入力映像データが通常再生モードの場合と特殊再生モードの場合とで、異なる補間フレーム画像を生成する。 - 特許庁
  • When the driving mode Dm is a normal mode Dn, a friction circle limit value μ_Fzi is set by the standard friction circle limit value Sμ_Fzi (S7).
    そして運転モードDmがノーマルモードDnのときは、標準摩擦円限界値Sμ_Fziで摩擦円限界値μ_Fziを設定する(S7)。 - 特許庁
  • After kneading this paving material by adding water, the paving material is poured into a form having a prescribed shape, and then, is dried at the normal temperature.
    この舗装用材料に水を添加して混練した後、所定の形状を有する型枠に流し込み、次いで常温で乾燥する。 - 特許庁
  • In a normal mode, the whole of a security area is viewed only as one encoded macro security file, whose content is very difficult to decode.
    ノーマルモードでは、セキュリティエリアの全体が暗号化された1つのマクロセキュリティファイルにしか見えず、内容解読が非常に困難である。 - 特許庁
  • A holding circuit 110 which holds video signals is arranged for every pixel and displaying is conducted by switching between a normal operating mode and a memory operating mode.
    各画素毎に映像信号を保持する保持回路110を配置し、通常動作モードとメモリ動作モードを切り換えて表示する。 - 特許庁
<前へ 1 2 .... 54 55 56 57 58 59 60 61 62 .... 415 416 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.