「PROCESS」を含む例文一覧(49990)

<前へ 1 2 .... 571 572 573 574 575 576 577 578 579 .... 999 1000 次へ>
  • In the process S105, evaluation for estimating the gain peak of the active layer is performed.
    工程S105では、活性層の利得ピークを見積もるための評価を行う。 - 特許庁
  • To prevent cracking of concrete around a pile without increasing a work process and cost.
    作業工程やコストを増すことなく杭周りのコンクリートのひび割れを防止する。 - 特許庁
  • To provide a developer carrying roller, an electrophotographic process cartridge and an electrophotographic image forming apparatus.
    現像剤担持ローラー、電子写真プロセスカートリッジ及び電子写真画像形成装置。 - 特許庁
  • The manufacturing method for the lithographic printing plate precursor which is provided with a photosensitive layer containing an infrared ray absorbent on a support body with at least the ends of facing two sides being chamfer-treated comprises sequentially performing a development process and a gumming process after an exposure to light.
    また、赤外線レーザー光での直接描画、高速処理でエッジ汚れの発生しない平版印刷版原版の製版方法を提供すること。 - 特許庁
  • THERMAL TRANSFER RECEPTIVE SHEET, PROCESS FOR PRODUCING IT AND METHOD OF IMAGE FORMING THEREWITH
    熱転写受容シート、その製造方法及びそれを用いた画像形成方法 - 特許庁
  • MINIATURE MOTOR, RECORDING MEDIUM DRIVER EMPLOYING THE SAME, AND PROCESS FOR MANUFACTURING THE MINIATURE MOTOR
    小型モータ、これを用いた記録媒体駆動装置、及び小型モータの製造方法 - 特許庁
  • This process is reiterated until all objects are classified in text or picture classes.
    全てのオブジェクトをテキスト類又はピクチャ類に分類するまで、この処理を繰り返す。 - 特許庁
  • To prevent generation of unusual sounds of a DC motor in its initial stage (in the course of its aging process).
    直流モータの初期段階(馴染み工程中)の異音発生を防止する。 - 特許庁
  • To provide a high-precision reflector, and to provide a process for producing coating thereof.
    高精度の反射鏡およびそのコーティングを製作する方法を提供すること。 - 特許庁
  • To make the operation to attach and detach a process cartridge to and from a device body simpler and easier.
    プロセスカートリッジの装置本体への着脱動作を簡易化及び容易化する。 - 特許庁
  • To lessen the number of component parts and simplify the assembling process.
    部品点数が少なく、かつ、組立工程が簡素な多芯同軸コネクタを提供する。 - 特許庁
  • Then, after the water feed process, the back washing with the permeated water and a gas is performed at first.
    そこで、通水工程後、透過水及び気体による逆洗をまず行う。 - 特許庁
  • To suggest a new manufacturing process for an inclined diffuse reflection body and to propose a structure.
    傾斜拡散反射体の新しい製造プロセスと構造体を提案すること。 - 特許庁
  • This process makes the shift of the maximum lift point approach the ideal characteristics at the stationary time.
    これにより、最大リフト点の推移が、定常時の理想的な特性に近付く。 - 特許庁
  • The solution flows out from a coating die to a substrate in a film forming process 82.
    膜形成工程82では溶液が塗布ダイから支持体に向けて流出する。 - 特許庁
  • To reduce nonuniform temperature of an annealing temperature, in the time of an annealing process.
    アニールプロセス時において、アニール温度の温度むらを低減することを目的とする。 - 特許庁
  • A process order calculation part of a manufacturing instruction device 110 specifies a part in progress in each process and calculates the degree of delivery margin of the part in progress.
    製造指示装置110の処理順序算出部は、各工程に仕掛かっている仕掛部品を特定し、当該仕掛かり部品の納期余裕度を算出する。 - 特許庁
  • To provide a process for the recovery of volatile aroma compounds from a vegetable material.
    植物材料から揮発性芳香化合物を採取する方法を提供する。 - 特許庁
  • To improve a recognition rate in an authentication process using a face image.
    顔画像を用いた認証処理における認識率を向上できるようにする。 - 特許庁
  • A binarization process is applied to the volume data, and binarized volume data are produced.
    ボリュームデータに対して二値化処理が適用されて二値化ボリュームデータが生成される。 - 特許庁
  • To achieve the analysis of a process by considering that a certain act has "not been done".
    ある行為が「行われていない」ことを考慮したプロセスの分析を可能とする。 - 特許庁
  • LIQUID EJECTION HEAD, LIQUID EJECTOR AND MANUFACTURING PROCESS FOR LIQUID EJECTION HEAD
    液体吐出ヘッド及び液体吐出装置並びに液体吐出ヘッドの製造方法 - 特許庁
  • Then, only the sense amplifiers SA1-SAn are activated for a disturbance cell (process 2).
    (処理2)次に、ディスターブセルに対してセンスアンプSA1〜SAnのみ活性化させる。 - 特許庁
  • To provide an imaging apparatus capable of smoothly executing a printing process.
    円滑な印刷処理を実行することのできる画像形成装置を提供する。 - 特許庁
  • ETCHING PROCESS FOR PRODUCING SILICON HAVING SUBSTANTIALLY NO UNDERCUT ON INSULATOR STRUCTURE
    実質的にアンダカットのないシリコンを絶縁体構造上に作製するエッチング工程 - 特許庁
  • METHOD FOR SWITCHING STRIPPING THICKNESS OF VENEER THROUGH VENEER CUTTING/SHEARING PROCESS
    単板切削切断処理工程に於けるベニヤ単板の剥き厚の切り替え方法 - 特許庁
  • To provide a sliding member coated with a DLC film or an amorphous carbon film, that are excellent in wear resistance and sliding properties, by the PSII process, and a process for preparing the member.
    耐摩耗性および摺動性に優れたDLC膜あるいは非晶質カーボン膜をPSII法により被覆した摺動部材およびその製造方法を提供する。 - 特許庁
  • In a cleaning process, the inner surface of the high-purity gas-filled vessel is cleaned without performing the pressure test with respect to the high-purity gas-filled vessel after the grinding process.
    洗浄工程では、研削工程の後、高純度ガス充填容器に対する耐圧試験を行うことなく高純度ガス充填容器の内表面を洗浄する。 - 特許庁
  • MOLDED PRODUCT OR FOOD CONTAINER USING NATURAL PLANT RAW MATERIAL AND ITS PRODUCTION PROCESS
    天然植物素材を用いた成形品又は食品容器とその製造方法 - 特許庁
  • MASKING METHOD, METHOD FOR FORMING PATTERN ON THIN FILM, AND METHOD OF RUNNING MASKING PROCESS
    マスキング方法、薄膜にパターン形成する方法及びマスキングプロセスの実行方法 - 特許庁
  • To provide a logical circuit design system for facilitating module arrangement, and reducing and facilitating the wiring quantity in arrangement wiring design to be a post-process of a regular design process.
    本設計工程の後工程となる配置配線設計におけるモジュール配置の容易化と配線量の低減および容易化とを実現する論理回路設計システム。 - 特許庁
  • To provide a manufacturing process monitoring apparatus, method, program and recording medium for much more reducing the information quantity of observation information acquired by observing a manufacturing process.
    製造工程を観測した観測情報の情報量をより少なくすることができる製造工程監視装置、方法、プログラムおよび記録媒体を提供する。 - 特許庁
  • The apparatus has a function (process variation correction) of correcting a shift of gradation characteristics caused by process variation, the shift occurring after the generation of the screen set.
    画像形成装置は、スクリーンセットを生成後に生じる、プロセス変動に起因する階調特性のずれを補正するための機能(プロセス変動補正)を有している。 - 特許庁
  • PROCESSING MEANS SUPPORTING MECHANISM, ELECTRIFYING DEVICE, PROCESS CARTRIDGE AND ELECTROPHOTOGRAPHIC IMAGE FORMING APPARATUS
    プロセス手段支持機構、帯電装置、プロセスカートリッジ及び電子写真画像形成装置 - 特許庁
  • To simplify a welding process of a lead battery and improve productivity.
    鉛蓄電池の溶接工程を簡略化するとともに生産性を向上させる。 - 特許庁
  • PHOTOLITHOGRAPHY UNIT AND PROCESS FOR FABRICATING SEMICONDUCTOR DEVICE OR LIQUID CRYSTAL DEVICE BY USING IT
    露光装置とそれを用いた半導体装置または液晶装置の製造方法 - 特許庁
  • ELASTIC ROLLER, METHOD FOR RECYCLING THE SAME, ELECTROPHOTOGRAPHIC PROCESS CARTRIDGE AND IMAGE FORMING APPARATUS
    弾性ローラ、その再生方法、電子写真用プロセスカートリッジ及び画像形成装置 - 特許庁
  • The manufacturing method of an electronic device is provided with a process for mounting the electronic parts on the mounting board 11, and a process for mounting the cap 15 on the mounting board 11.
    電子装置の製造方法は、電子部品13を実装基板11に実装する工程と、キャップ15を実装基板11に装着する工程とを備えている。 - 特許庁
  • To process video data optimal for an environment for use or requested quality.
    使用環境や要求品質に対して最適な映像データの処理を行うこと。 - 特許庁
  • To obtain an optical fiber terminal processing machine which can perform processes in parallel, shorten process times, and improve the operation rates of the respective process stages.
    各処理を並列に行うことができ、加工時間を短縮することができ、各処理工程の稼動率を向上させることができる光ファイバ端末加工機を得る。 - 特許庁
  • When the continuously imaging process or the displaying process is conducted, the transfer mode between a memory 102 and a digital interface unit 105 is changed into a low-speed transfer mode.
    連続撮影処理または表示処理を行っている場合、メモリ102とDIU(デジタルインターフェース部)105との間の転送モードは低速転送モードに変更される。 - 特許庁
  • Cycle time including time required by a finish polishing process can thereby be reduced to a great extent.
    仕上げ研磨工程を含むタクトタイムをも大幅に短縮することができる。 - 特許庁
  • ELECTROPHOTOGRAPHIC PHOTORECEPTOR DRUM, PROCESS CARTRIDGE, AND ELECTROPHOTOGRAPHIC IMAGE FORMING DEVICE
    電子写真感光体ドラム及びプロセスカ−トリッジ及び電子写真画像形成装置 - 特許庁
  • The coating is then consolidated and the tube is collapsed in the conventional MCVD process.
    次に、被覆は硬化され、チューブは、MCVD法の通常の工程で縮径される。 - 特許庁
  • This adaptive value generation program has the adaptive process control program and a DOE tool.
    適合値生成プログラムは、適合手順制御プログラムとDOEツールとを備える。 - 特許庁
  • SURFACE-TREATED POWDER, PROCESS OF PRODUCING THE SAME AND COSMETIC CONTAINING THE SAME
    表面処理粉体及びその製造方法並びにそれを含有する化粧料 - 特許庁
  • The device driver performs a process for hooking the OS end at the request and after the downloaded boot image file, etc., is loaded to a main memory, the process is interrupted (144 to 148).
    デバイスドライバは、要求に応じてOS終了をフックする処理を行い、ダウンロードしたブートイメージファイル等をメインメモリにロードした後に処理を中断する(144〜148)。 - 特許庁
  • To provide a molding process simulation apparatus for performing the analysis of CAE by the reduced number of working processes, a molding process simulation program and a deformation analyzing method of a molded product.
    少ない作業工数でCAE解析を実行可能な成形プロセスシミュレーション装置、成形プロセスシミュレーションプログラム及び成形品の変形解析方法を提供する。 - 特許庁
  • ELECTRONIC CONTROL UNIT, SPEED CONTROL UNIT FOR FAN, IN PARTICULAR, AND ITS MANUFACTURE PROCESS
    電子制御ユニット、特に扇風機用の速度制御ユニットおよびその製作プロセス - 特許庁
  • The label 4 produced by being printed in this way is pasted to a prescribed position of the electronic equipment 5 in a process prior to the writing process of the inherent information.
    このようにして印刷されて作成されたバーコードラベル4は、固有情報の書き込み工程よりも前の工程において、電子機器5の所定の位置に貼付される。 - 特許庁
<前へ 1 2 .... 571 572 573 574 575 576 577 578 579 .... 999 1000 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.