However, trade and investment liberalization and advances in transportation and communications technology encouraged the active shift of mass production activities in particular to local Japanese cities and East Asian locations. At the same time, economic activities in major cities became focused on information and knowledge, with a particular emphasis on planning management and R&D. しかしながら、貿易・投資の自由化、交通及び通信技術の発達により、量産活動等は積極的に日本の地方都市や東アジア各地域に移転し、大都市における経済活動は企画管理や研究開発を中心とする情報・知識活動となった。 - 経済産業省
A Nagano prefecture-based manufacturer of injection molding machines that engaged in joint R&D with Shinshu University’s Faculty of Engineering commercialized resinous composite materials using CNT (carbon nanotube) and resin (plastics) and, in September 2007, established the relevant business division and started selling compound pellet materials and molded products using this material. 信州大学工学部と共同研究開発を行っていた県内射出成型機メーカーが、共同研究開発の成果として、CNT(カーボンナノチューブ)・樹脂(プラスチック)複合材料を商品化し、平成19年9月から事業部を立ち上げ、複合ペレット材や成形物の販売を開始した。 - 経済産業省
(r) The entry of IDs/Passwords is indispensable for installing the target software onto the computer from a CD-ROM or any other media in which the target software is stored. In each of the cases listed above, the act of downloading or installing the target software constitutes an act of reproduction.
γ目的とするソフトウェアが格納されたCD-ROM等の媒体から、当該ソフトウェアをコンピュータにインストールするにあたって、ID・パスワード等の入力が必須不可欠とされている場合上記のいずれの場合も、ソフトウェアをダウンロードないしインストールを行なう行為自体は、複製行為に該当する。 - 経済産業省
*Describe specific partnership plans of the Regional Headquarters or R&D site with universities, public research institutions or companies. If applicants plan to collaborate with overseas partners, please specify.
*当該拠点において行う統括業務又は研究開発業務に関連して行う国内の大学、公的研究機関又は企業等の提携予定について具体的に記載すること。(海外の企業等との提携を予定している場合には、海外であることを明記して記載) - 経済産業省
Both government and university research institutes as well as the private sector carry out world-leading research, and possess numerous promising technology seeds. Nevertheless, the R&D by the Government, universities, and the private sector have been carried out without coordination as well as a clear vision of the final product, and have failed to capitalize on each other’s strength. As a result, the final product is often outdone by products of other countries’ in global competition.
それにもかかわらず、最終製品段階の国際競争で他国の後じんを拝することが多いのは、国、大学、民間の研究開発が、出口を見据えずバラバラに行われ、それぞれの持ち味を十分に活かしきれていないことが原因である。 - 経済産業省
Fig. 2-2-31 shows the efforts to explore overseas channels effectively made by enterprises doing export business solely on a yen basis. High proportions of enterprises pursue product-related strategies, including “development of products in response to local demand,” “differentiation of original products through R&D,” and “enhanced lineup of low-price products.”
第2-2-31 図は、円建てのみで輸出を行う企業の効果的な海外販路開拓の取組を示したものであるが、「現地向けの商品開発」、「研究開発を通じた自社製品の差別化」、「低価格品の充実」等の製商品面の取組を挙げる企業の割合が高い。 - 経済産業省
This indicates that if exporting enterprises that do business in yen are to develop their overseas markets even in the face of a yen appreciation, which leads to rise in product prices overseas, it is important that they work constantly to make their original products more attractive (such as through product development and R&D).
円建て輸出企業にとっては、海外での製商品価格の上昇をもたらす円高環境下においても、海外販路を開拓していくために、商品開発・研究開発等自社の製商品の魅力を高める不断の取組が重要であると考えられる。 - 経済産業省
Various forms of support, including the provision of tax-based support, support for fresh R&D and commercialization of medical devices, and support for the development of unique technologies to prevent the feared leakage of technologies that can occur when expanding overseas, in order to encourage SMEs to take on fresh research and technological challenges.
また、税制上の措置や、新たに講じた医療機器の研究開発・実用化への支援、海外展開で懸念される技術流出防止等のためのオンリーワン技術開発への支援等により、中小企業の新たな研究・技術課題への挑戦を促進した。 - 経済産業省
To ensure that the cutting-edge technological “seeds” and promising untapped technologies held by enterprises in the private sector are properly and effectively brought to commercial fruition, support was provided via the New Energy and Industrial Technology Development Organization (NEDO) to R&D-oriented enterprises engaging in commercial development activities.
民間企業等の有する優れた先端技術シーズや有望な未利用技術を実用化・事業化に着実かつ効果的に結実させるため、実用化開発を行う研究開発型中小企業等に対し、新エネルギー・産業技術総合開発機構を通じて支援を行った。 - 経済産業省
Considered from the point of view of whether human resources are involved in R&D, however, one finds that a high proportion of smaller enterprises have entrepreneurs or directors and employees who are involved regularly in planning and research in combination with other duties (Fig. 2-1-57). しかしながら、研究開発を行う人材という観点で、恒常的に企画・開発を担う人材の有無を企業規模別にみると、規模が小さい企業では、経営者自身が行う場合や、他業務を兼務している役員・従業員が行う割合が高い(第2-1-57図)。 - 経済産業省
R&D may ordinarily be classified into: (1) pure research (pure scientific research with no specific commercial objectives), (2) applied research (scientific research for specific commercial objectives) and (3) practical research (research into the commercialization of the results of pure and applied research in the form of products and production methods). 研究開発は通常、〔1〕基礎研究(特定の商業目的を持たない純粋科学的な研究)、〔2〕応用研究(特定の商業目的のための科学的な研究、〔3〕実用化研究(基礎研究、応用研究の成果を製品、製法として実用化するための研究)に分類できる。 - 経済産業省
According to the “Basic survey of overseas business activities” (2012), in the hearing with large companies about the use of the dividends from their overseas affiliates, it was found that the wholesale and service industry use more for “Dividends to shareholders” (17%, 25%) than for “Investment in R&D and equipment” (14.5%, 13.5%). 「海外事業活動基本調査」(2012)によれば、大企業に対し現地法人からの配当金の用途を聞いたところ、卸売業やサービス業においては、「研究開発、設備投資」(14.5%、13.5%)に比べて、「株主への配当」(17%、25%)に活用される割合が高い。 - 経済産業省
In addition, the government provides support to R&D on rare metal recycling. In April 2011, it also developed the final report of “Study Group on Collection and Appropriate Treatment of Rare Metals from Used Small Home Electronics,” jointly held by METI and the Ministry for the Environment since FY2008.
また、レアメタルリサイクルに係る技術開発の支援を実施するとともに、2008年度から経済産業省と環境省が合同で開催してきた「使用済小型家電からのレアメタルの回収及び適正処置に関する研究会」の最終報告書を2011年4月にとりまとめた。 - 経済産業省
At the counting stage, the number R of feature vectors (○ in Fig.) considered to be mutually similar and the number D of feature vectors (× in Fig.) considered not to be mutually similar are hierarchically counted, frame by frame, and when the final non-similar feature vector number D is less than a threshold (T-U), they are considered to be mutually similar. 計数段階では、類似とされた特徴ベクトルf(図中○印)の数Rと、非類似とされた特徴ベクトルf(図中×印)の数Dとをフレーム毎に階層的に計数し、最終的な非類似数Dが閾値(T−U)を下回っていれば、類似とする。 - 特許庁
To provide a bathtub base having a suction cup, that is a simple and low-cost structure, in which the suction cup can be added to a leg, does not come off during use or attachment and removal, does not come off a bathtub leg, and can be adhered also to the rising portion R in the vicinity of the inwall of the bathtub. 簡易で低コストな構造で吸盤を脚部に付設でき、使用中も着脱時も外れず安全で、且つ、浴槽台脚部から外れることなく、浴槽底面の浴槽内壁付近の立ち上がりR部分にも吸着固定できる吸盤を有する浴槽台を提供する。 - 特許庁
A signal line driving circuit has two driving parts 1a, 1b for driving three hundred twenty signal lines S and each of the driving parts 1a, 1b has sift registers (S/R) 2, sampling latches (SL) 3, load latches (LL) 4, D/A converters (DAC) 5, amplifiers (AMP) 6, and selection circuits 7. 本発明に係る信号線駆動回路は、320本分の信号線Sを駆動する2つの駆動部1a,1bを有し、各駆動部1a,1bは、シフトレジスタ(S/R)2と、サンプリングラッチ(SL)3と、ロードラッチ(LL)4と、D/Aコンバータ(DAC)5と、増幅器(AMP)6と、選択回路7とを有する。 - 特許庁
The laser peening apparatus comprises a liquid holding head 1 for forming and holding the liquid R for enclosing the plasma on the local surface of a workpiece W, and a laser radiating head 2 for irradiating the surface of the workpiece W with a laser beam via the liquid held by the liquid holding head 1. 本発明のレーザピーニング装置は、被加工物Wの局所の表面上にプラズマを閉じ込める液体Rを形成保持する液体保持ヘッド1と、液体保持ヘッド1に保持された液体を介して被加工物Wの表面にレーザを照射するレーザ照射ヘッド2とを備える。 - 特許庁
The media player section 18 is provided with a content reproducing section 36 for reproducing the content stored in a recording medium 42 and a reproduction speed judgment section 38 for setting the reproduction speed R of the content in accordance with the expected arrival time T and the standard reproduction time P of the content. メディアプレーヤ部18は、記録媒体42に格納されているコンテンツを再生するコンテンツ再生部36と、到着予想時間Tとコンテンツの標準再生時間Pとに基づいてコンテンツの再生速度Rを設定する再生速度判断部38とを有する。 - 特許庁
A maintenance server 130 registers alternative fingerprint information for each user, and transmits the alternative fingerprint information to the IC card using terminal 120, in response to a request for the change of the fingerprint information from the IC card using terminal 120, and changes the fingerprint information of the IC card 110 via an R/W 121. メンテナンスサーバ130は、ユーザごとに代替の指紋情報を登録し、ICカード利用端末120からの指紋情報の変更要求に応答して代替の指紋情報をICカード利用端末120へ送り、R/W121を介してICカード110の指紋情報を変更する。 - 特許庁
The compost is manufactured by mixing a strong alkali treated material having pH≥12.5 which is prepared by mixing and stirring calcium oxide with the organic waste with the fermentation germ Random X (R), heaping without supplying air and turning back once in a week in the method of composting the organic waste using the fermentation germ. 酸化カルシウムと有機性廃棄物を混合攪拌したpH12.5以上の強アルカリ処理物を、発酵菌(商品名)ランダムX菌と混合し、空気供給なしで堆積し、1週間に1度づつの切り返しで堆肥を製造できる発酵菌及び堆肥化方法。 - 特許庁
The reproduction apparatus main body 1 includes: a detection means 16 for detecting the presence/absence of mounting of the speakers 6; and a reproduction mode conversion means 17 for controlling a supply form of stereo sound signals L, R and surround sound signals SL, SR to the speakers 2 and the speakers 6. 再生機本体1は、スピーカ6,6の装着の有無を検知する検知手段16と、その検知結果に基づいてスピーカ2,2及びスピーカ6,6に対するステレオ音声信号L,R及びサラウンド音声信号SL,SRの供給形態を制御する再生モード変換手段17とを備える。 - 特許庁
Incidence X rays 103 of copper Cuα1 (1.5374 Å) from an X-ray tube 101 pass through a slit 102 and is reflected from a crystal r surface that is an artificial crystal ingot 105 at an incidence point 104, and enters an X-ray detection section 112 as reflection X-rays 111. X線管101からの銅Cuα_1(1.5374Å)の入射X線103はスリット102を通り入射点104で人工水晶インゴット105である水晶r面で反射し、反射X線111として、X線検出部112に入る。 - 特許庁
This method for producing a sulfone derivative of general formula (4) (Ar is an aryl group; R is a lower alkyl or a hydroxyl-protecting group; X is a halogen or HSO4) comprises reacting a phosphonium salt of general formula (2) with an aldehyde derivative of general formula (3) in the presence of a base. 一般式(2) (式中、Arはアリール基、Rは低級アルキル、水酸基の保護基、Xはハロゲン、HSO_4を示す。)で示されるホスホニウム塩を、塩基存在下、一般式(3) で示されるアルデヒド誘導体と反応させる一般式(4) で示されるスルホン誘導体の製造方法。 - 特許庁
Next, in view of the change in the level of attractiveness from the initial period of entry to the present day, for China, there is a significant increase in the level of attractiveness of such factors as “local infrastructure (transport, communications, electricity, etc.)” (3.3 à 4.0), “excellent local human resources (white collar)” (2.7 à 3.6), and “local technology and R&D” (2.1 à 2.9). 次に、進出当初の魅力度の現在に至る変化に着目してみると、中国では、「現地のインフラ状況(交通・通信・電力など)」(3.3→4.0)、「現地の優秀な人材(ホワイトカラー)」(2.7→3.6)及び「現地における技術及び研究開発」(2.1→2.9)の項目が大きく上昇している。 - 経済産業省
Only one company, an electronics related manufacturer, replied that they were “carrying out (or planning to carry out) basic research,”which, in this case, constitutes R&D focused on issues pertinent to the Chinese language in terms of software development. このうち、「基礎研究も行う(計画がある)」と回答した企業は、エレクトロニクス関連メーカー1社のみである。その研究開発内容も、基礎的研究とはいえ、ソフトウェア開発等における中国語固有の問題等を中心としたエレクトロニクス分野特有の研究開発である。 - 経済産業省
Against the backdrop of intensified global competition in genomic drug discovery (development of medicines using information about the human genome) as well as the fact that R&D of new medicine incurs enormous fees, leading pharmaceutical manufacturers in the US and Europe performed M&A in pursuit of economies of scale. その背景には、ゲノム創薬(人間の遺伝子情報を活用した医薬品開発)をめぐって世界的な開発競争が激化し、また、新薬の研究開発に巨額の費用がかかることから、欧米の大手製薬メーカーは、規模の利益を追求してM&Aによる合従連衡を繰り広げた。 - 経済産業省
More specifically,policies were adopted promoting the injection of production factors into innovation (educational reform, improved job training, assistance for R&D), emphasis on market principles, and enforcement of the principle of self-responsibility (reduction of the trade deficit, regulatory reform of the telecommunications industry) 4. 具体的には、イノベーション活動への生産要素の投入促進(教育改革、職業訓練の充実、研究開発への支援)や、市場原理の尊重、自己責任原則の徹底(財政赤字の削減、電気通信事業における規制改革等)といった政策が採られるようになった4。 - 経済産業省
In the US, the stimulation of regional economies was achieved based around universities as partners in these tie-ups, but as can be seen in Figure 4.3.8, Japanese companies continue to look to foreign research institutions rather than local universities closer to home for their R&D results. 企業は、知的財産権取得の意欲、研究機関の情報公開、研究のレベルといった点で、国内の大学より海外の研究機関を評価しており(第4―3―9図)、こうしたことが海外への研究資金の流出につながっているものと考えられる。 - 経済産業省
The Council has held meetings for exchange among academia, industry and government , promoted internships, and considered the establishment of TLOs. In addition to these tripartite partnership programs, the Council has also organized R&D promotion programs, programs supporting new business, information network programs, various types of seminars and exchange meetings. 同協議会は、産学官交流会の開催、インターンシップの促進、TLO設置の検討といった産学官連携事業のほかに、研究開発促進事業、新規事業支援事業、情報ネットワーク事業、各種セミナーや交流会の開催等を行ってきた。 - 経済産業省
Through acceptance of human resources from companies developing medical devices in the medical institutions conducting R&D for medical devices, and providing training, etc. in designing marketable products, we will advance cultivation of human resources to be engaged in development and promote the development activities which satisfy the medical care needs in Japan and overseas. 医療機器の研究開発を行う医療機関で、医療機器を開発する企業の人材を受け入れ、市場性を見据えた製品設計の方法に関する研修等を実施することにより、開発人材の育成や国内外の医療ニーズを満たす開発を推進する。 - 厚生労働省
Sec.158 Damages; Requirement of Notice In any suit for infringement, the owner of the registered mark shall not be entitled to recover profits or damages unless the acts have been committed with knowledge that such imitation is likely to cause confusion, or to cause mistake, or to deceive. Such knowledge is presumed if the registrant gives notice that his mark is registered by displaying with the mark the words “Registered Mark” or the letter R within a circle or if the defendant had otherwise actual notice of the registration. 第158条 損害賠償;告知要件 侵害訴訟においては,登録標章の権利者は,模倣物が混同を生じさせ,錯誤を生じさせ又は欺瞞する虞があることを知って当該行為がなされている場合を除き,利益を取り戻し又は損害を賠償させる権利を有さない。権利者が標章とともに「登録標章」の語若しくは円で囲ったRの文字を表示することにより当該標章が登録されていることを告知している場合,又は被告がその他実際の告知を受けていた場合は,その虞があることを被告が知っていたものと推定する。 - 特許庁
Though the Guideline is limited to patent and technology information in its coverage, given that (i) it provides an overview of corporate management as a whole through R&D strategies and patent strategies, (ii) individual companies are expected to exercise their ingenuity in preparing actual reports, and (iii) institutional investors and others are recently showing a growing interest in R&D and patents of companies, it is hoped that the Guideline will mark the first step in pushing ahead with the consideration of the evaluation and disclosure of intellectual capital in Japan through the preparation of intellectual property reports in line with this Guideline. この指針は、その対象を特許・技術情報に限定しているが、①研究開発戦略や特許戦略を通じて企業の経営全体を俯瞰するものとなっていること、②具体的な報告書の作成に当たっては各企業が創意工夫を行うこととされていること、③昨今、機関投資家を中心に、企業の研究開発や特許に対する関心が高まっていること等から、今後我が国においても本指針に基づく知的財産報告書の作成を通じて、今後我が国における知的資本の評価と開示に関する検討を進める上での第一歩となることが期待される。 - 経済産業省
Meanwhile, the music player 20 is provided with a Bluetooth (R) unit 20a for receiving the sound signal transmitted from the portable telephone set 10 through the unit 10a and also transmitting the sound signal inputted through a telephone transmitter 23 to the portable telephone set 10 through the unit 10a. 一方、音楽再生機20には、ブルートゥースユニット10aを介して携帯電話機10から送信された音声信号を受信するとともに、送話器23を介して入力された音声信号をブルートゥースユニット10aを介して携帯電話機10へと送信するブルートゥースユニット20aが設けられる。 - 特許庁
As a result, the evil caused by the use of the detected temperature at sensing abnormality can be avoided, and the load limit rate R of the inverter can be recovered from 100% by lowering the limit temperature Tset quickly when the inverter temperature Tinv falls under the upper limit temperature Tmax. この結果、センシング異常の際の検出温度を用いることによる弊害を回避することができ、インバータ温度Tinvが上限温度Tmax以下になったときに迅速に制限温度Tsetを降下させてインバータの負荷制限率Rを100%から復帰することがことができる。 - 特許庁
In addition, since the suction holes 61c are formed to be expanded substantially in the direction along the outer periphery of substrate W, both outer portions R of the lower edge of a substrate positioned above a round hole PR as in the case of conventional practice can be sucked and a drying gas sufficiently flows down. さらに、吸引穴61cの形状が、基板Wの外周に沿った方向に実質的に拡げられた形状をしていることにより、従来例における丸穴PRの上方に位置する基板下縁部の両外側にあたる部分Rであっても吸引が行われ、十分に乾燥用の気体が流下する。 - 特許庁
Waveform when the guide wave by the reference waveform is reflected by a defect Do at the center position of the inspection region R and is received by a guide wave transmission/reception element 1, is calculated based on the thickness and material, and transmitted waveform is created so that the calculated reception waveform is transmitted from that having larger reception time. 基準波形によるガイド波が検査領域Rの中心位置にある欠陥Doで反射してガイド波送受信素子1で受信されるときの波形を、肉厚と材質に基づき計算し、計算した受信波形で受信時間が遅いものから順に送信するように送信波形を作成する。 - 特許庁
The fluorescence intensity Ur0 of fluorescence Lk0 generated from the microchip 11 itself being equivalent to a microchip 10, to which the fluorescence-labeled biosample R is supplied is detected from irradiation start of exciting light Le, until sufficient attenuation of the fluorescence intensity Ur0, and the change with the time passage of the fluorescence intensity Ur0 is stored. 蛍光標識された生体試料Rが供給されたマイクロチップ10と同等のマイクロチップ11自体から発生する蛍光Lk0の蛍光強度Ur0を励起光Leの照射開始から蛍光強度Ur0が十分に減衰するまで検出し、蛍光強度Ur0の経時変化を記憶する。 - 特許庁
A smart keeper is a necklace holder for stereo earphone that is made of fiber having a tubular shape and comprises a zipper, and in which four sliders and a Magic Tape (R) for fixing are provided within the holder, thereby easily installing the cord of the stereo earphone in the holder, easily fixing the cord at an any position and eliminating entanglement of the cord. スマートキーパーは、繊維製の筒状のホルダーであり、このホルダーにファスナーを設け、スライダーを4つとホルダー内部に固定用のマジックテープ(登録商標)を設け、ステレオイヤホンのコードをホルダーに設置しやすく、コードの位置を任意の位置に固定しやすく、コードの絡まりをなくすことを特徴とするステレオイヤホン用ネックレスホルダーである。 - 特許庁
The hydroxycitric acid derivative or its salt is used for producing food and/or an oral agent and is represented by the formula (I), wherein R^1 comprises an acyl group which may contain branch, unsaturated connection or substituent, the residue of 2-30C aliphatic carboxylic acid or 7-30C aromatic carboxylic acid. 食品および/または経口剤を製造するための、下記式(I):(式(I)中、R^1は、分岐、不飽和結合もしくは置換基を有していてもよい、炭素数2〜30の脂肪族カルボン酸または炭素数7〜30の芳香族カルボン酸の残基からなるアシル基を表す。)で示されるヒドロキシクエン酸誘導体又はその塩の使用。 - 特許庁
When an automatic recommendation function is valid, a control part 501 determines a prescribed program to be recommended based on information about the frequency distribution, generates display signals SCH that display information about the program, supplies the display signals SCH to compositing parts 513, 533 and composites the display signals into color signals R, G, B. 自動レコメンド機能が有効なとき、制御部501は、頻度分布の情報に基づいて推奨すべき所定番組を決定し、当該番組の情報を表示する表示信号SCHを発生し、この表示信号SCHを合成部513,533に供給して表示用の色信号R,G,Bに合成する。 - 特許庁
In the method for growing the aluminum nitride (AIN) crystal by a sublimation method, a seed crystal that grows the AlN crystal at an angle within 35 degrees to a direction perpendicular to axis c is used, provided that the AlN crystal is grown in the direction of axis a, axis m or axis r. 昇華法による窒化アルミニウム(AlN)結晶の成長方法であって、c軸に垂直な方向から35度の角度範囲でAlN結晶が成長するような種結晶を用いることを特徴とし、上記AlN結晶の成長方向として、a軸方向、m軸方向およびr軸方向が挙げられる。 - 特許庁
For example, an R part which is a first reinforcing part 303 is formed on a corner part of a space formed by selectively removing an unnecessary part of the metal material, and a thick part is formed as a second reinforcing part 304 by selectively making a side wall part 302 of the cover 300 thick by etching. 例えば、金属材料の不要部分を選択的に除去して形成された空間のコーナ部に第1の補強部303であるアール部を形成したり、エッチングにより蓋300の側壁部302を選択的に肉厚にすることで、その肉厚の部分を第2の補強部304として形成したりすることができる。 - 特許庁
By mutual radio communication by IEEE802.11 protocol and the mutual cable communication of Ethernet (R), the printing parts 101 is connected with terminal devices 102 (102A and 102B) of a PC or a portable terminal through the cable network of the Ethernet 104. IEEE802.11プロトコルによる相互無線通信やIEEE802.3プロトコルによるEthernet(登録商標)の相互有線通信によって印刷部101がEthernet(登録商標)104の有線ネットワークを介して、PC又は携帯端末などの端末装置102(102A,102B)と接続されている。 - 特許庁
This silica particle has a methoxy and/or ethoxy group, a 4-18C alkoxy group and -OSiR^2_3 (R^2 represents one or more groups selected from an alkyl group, an aryl group and an alkenyl group) bonded on the surface, and the variation coefficient of primary particle diameters is 10.0% or less. シリカ粒子は、メトキシ基および/またはエトキシ基と、炭素数4〜18のアルコキシ基と、−OSiR^2_3(R^2はアルキル基、アリール基、およびアルケニル基から選択された一種または二種以上の基を表す)とが表面に結合し、一次粒子径の変動係数が10.0%以下であるシリカ粒子である。 - 特許庁
The cross section shape of the gas passage 31a can be deformed so that the passage cross section angle R becomes 90° or more with the deformation member 80 different from the separator 12a formed by a means such as press forming, and thereby obtaining the passage shape difficult to form by the means such as press forming. プレス成形等の手段で加工されたセパレータ12aとは別体の変形部材80を用いてガス流路31aの断面形状を、その流路断面R角が90度以上になるように変形させることが可能となり、プレス成形等の手段では成形困難な流路形状を得ることができる。 - 特許庁
The performance control part 22 is dividedly constituted of a one-chip microcomputer 40 receiving the control command CMD from the main control part 21 and analyzing its content, and a voice reproduction LSI 42 outputting voice signals ±R and ±L along with an operation signal PLAY based on the command form the one-chip microcomputer 40. 演出制御部22は、主制御部21からの制御コマンドCMDを受けてその内容を解析するワンチップチップマイコン40と、ワンチップチップマイコン40からの指示に基づいて作動信号PLAYと共に音声信号±R,±Lを出力する音声再生LSI42とに区分されて構成される。 - 特許庁
In the digital image service method for providing a user with the digital image of the user while recording digitally on a CD-R, a mechanism (data structure) for compounding the face image included in the digital image of the user and the template image for compounding face easily or automatically is also recorded simultaneously. ユーザのデジタル画像をCD−Rにデジタル記録してユーザに提供するデジタル画像サービス方法において、前記ユーザのデジタル画像を記録する際に、ユーザのデジタル画像に含まれる顔画像と顔合成用のテンプレート画像との合成を容易に又は自動で行うための仕組み(データ構造)も同時に記録する。 - 特許庁
An angle α', formed between the reference face 10a and respective reflective faces 12a, is adjusted to correspond to a distance R between an optical center CL of the Fresnel lens form and the centers of the respective reflective parts 12 so as to reflect the projection light 11a from the projector 11 toward a prescribed position Pe. 投射装置11からの投射光11aを所定の位置Peに向かって反射させるように、基準面10aとそれぞれの反射面12aとのなす角度α’が、フレネルレンズ形状の光学的中心CLとそれぞれの反射部12の中心との間の距離Rに対応して調整される。 - 特許庁
In the cleaning blade which cleans residual toner 9 on the photoreceptor 1 of an electrophotographic image forming device, the cleaning blade 10 is characterized in that curved surface shapes (angle R) 16 are provided, contacting the surface of the photoreceptor 1, at off-image area ends 15 of the photoreceptor 1. このクリーニングブレード10は、電子写真式画像形成装置の感光体1上の残留トナー9を清掃するクリーニングブレード10であって、感光体1表面に接触する部分の感光体1上の画像領域外15端部に曲面形状(角R)16を設けてあることを特徴とする。 - 特許庁
In this heat exchanger, an arranging order in the tube width direction, of refrigerants R flowing in refrigerant passages 12 is same between the refrigerant passages 12 at a windward side of cooling wind W and the refrigerant passages 12 at a leeward side at the bent part 7 formed on an intermediate part of the tube 10. 本発明の熱交換器は、チューブ10の中間部分に形成された曲折部7において、冷媒通路12を流れる冷媒Rのチューブ幅方向での並び順が、冷却風Wの風上側となる冷媒通路12と、風下側となる冷媒通路12とで同じ並び順となるようにしたことを特徴とする。 - 特許庁