To achieve a simultaneously biaxially stretched film that has uniform and stable quality stability by suppressing as far as possible an increase in thickness unevenness caused by stress relaxation being the problem in the simultaneous biaxial stretching method. 同時二軸延伸法で問題となる応力緩和に起因する厚さムラの拡大を極力抑え、均一で優れた品質安定性を有する同時二軸延伸フィルムを得る。 - 特許庁
To provide a fixing structure of a member capable of reliably suppressing the concentration of stress to a single member even when a load is applied in the axial direction of a boss. ボスの軸方向に荷重が加わった場合であっても、1つの部材に応力が集中するのを確実に抑えることができる部材の固定構造を提供することを目的とする。 - 特許庁
To prolong the life of an identification ring by restricting fluttering of an identification piece and reducing tensile stress, abrasion, torsion and the like which occur at each part of a conductor grip and an identification body. 標識片のフラッタリングを抑制し、導体把持部や標識体の各部位に生じる引張応力や摩耗、ねじれ等を低減して、標識リングの長寿命化を図ること。 - 特許庁
To provide a retainer having a long service life, by preventing separation with respect to an inner ring or an outer ring by edge stress generated at both ends of rollers during operation. 稼働時にころの両端部に発生するエッジ応力によって内輪または外輪に剥離が引き起こされることを防ぐことによって、長寿命である保持器を提供する。 - 特許庁
To provide a magnetostrictive load sensor capable of preventing dispersion of output change caused by stress concentration, and improving reliability and a manufacture yield, and to provide a moving body including the sensor. 応力集中に起因する出力変化のばらつきが防止され、信頼性および製造歩留まりが向上された磁歪式荷重センサおよびそれを備えた移動体を提供する。 - 特許庁
To reduce the deterioration of sealing performance and the stress of a fuel injection valve that are caused by an eccentrically connected fuel pipe in the fuel injection valve used in an internal combustion engine. 内燃機関に用いる燃料噴射弁において、取り付け時の燃料配管の偏芯によってシール性が低下したり、燃料噴射弁が負荷を受ける程度を軽減する。 - 特許庁
When the shaft 1 rotates, the rotation moment not more than the frictional force is dispersively applied to the receiving part 5 and the pressing part 6 to avoid stress concentration on a part of the friction rings 2. シャフト1が回転する時に摩擦力以下の回転モーメントは受け部5と押圧部6に分散させてかかり、摩擦輪2の一部への応力集中を避けることができる。 - 特許庁
To provide a protective bag for an automobile occupant's head with a smooth inflation of the bag and reducing a necessary strength of the bag without locally producing excessive stress. バッグの膨張がスムーズであり、また局部的に過大な応力が生じることがなく、バッグの必要強度が低減される自動車乗員頭部の保護バッグを提供することを目的とする。 - 特許庁
To provide a laminate which is high in transparency and has high gas-barrier properties even when it is subjected to high humidity and mechanical stress. 本発明は、透明性が高く、高湿度下や機械的ストレスを受けるような場合でも極めて高度なガスバリア性能を有する積層体を提供することを主目的とするものである。 - 特許庁
Preliminary tensile force is given to the link 11 so that compression stress remaining in a part being an inner side of the chain of each link 11 becomes larger than that remaining in a part being an outer side of the chain of each link 11. 各リンク11のチェーンの内側になる部分の残留圧縮応力が同外側になる部分に比べて大きくなるように、リンク11に予張力が付与されている。 - 特許庁
To provide a punching method of a high-strength steel sheet by which the residual stress in the punched hole of the steel sheet is reduced and the deterioration of delayed fracture withstanding property of the high-strength steel sheet is prevented. 鋼板の打ち抜き穴での残留応力を低減し、高強度鋼板の耐遅れ破壊特性の劣化を防止する高強度鋼板の打ち抜き加工方法を提供する。 - 特許庁
To provide a screw type reinforcement joint by which stress transmission of each peripheral part of a threadingly fitted part between a male screw part of a reinforcing bar and a threaded tube is made even, enabling transmission of a larger force. 鉄筋の雄ねじ部とねじ筒との螺合部分における各周部分の応力伝達が均一化され、より大きな力の伝達が可能となるねじ式鉄筋継手を提供する。 - 特許庁
To provide a welded structure of a structural body in a nuclear reactor which can prevent the generation of a stress corrosion crack beforehand, and can perform integral installation welding stably and easily in a short time. 応力腐食割れの発生を未然に防止し、健全な取付溶接を安定かつ容易に短時間で行うことのできる炉内構造物の溶接構造を提供する。 - 特許庁
Thereby, increase in stress at a corner part made by the outer peripheral surface 110 and the inner surface 28d of which the wall thicknesses in a radial direction are reduced by the raceway groove 28f of the outer ring 28 is prevented. これにより、外輪28の軌道溝28fにより径方向の肉厚が薄くなった外周面110と内側面28dとの角部の応力増大を防止できる。 - 特許庁
By this setup, stress applied to an n-channel MOSFET channel region from STI can be reduced, so that the drive current of the n-channel MOSFET can be restrained from decreasing. これにより、STIからNchMOSFETチャネル領域に加わる応力を低減できるので、NchMOSFETの駆動電流の減少を抑えることができる。 - 特許庁
To provide a water-base paint capable of maintaining the equal tensile stress at a high temperature to that at a temp. around room temperature and giving an elastic coated film which does not cause an appearance abnormality such as blistering or the like. 高温時でも、室温付近と同様な引張応力を維持でき、フクレなどの外観異常を発生しない弾性塗膜が得られる水性塗料を提供することにある。 - 特許庁
To provide a speaker so highly reliable that an attaching portion of a diaphragm and an edge is hardly peeled, in which a stress applied on the attaching portion of the diaphragm and the edge becomes large. 振動板とエッジの取り付け部分にかかるストレスが大きくなるようなスピーカにおいて、振動板とエッジの取り付け部分が剥がれにくく信頼性の高いスピーカを提供する。 - 特許庁
The root section of the lower side of an extended part 2 is arranged more closely to a card part 1 side than the root section of the upper side of the extended part 2 so that a stress to be applied on a memory card can be distributed. 拡張部2の下側の付根部分を、拡張部2の上側の付根部分に比べてカード部1側に寄せることにより、メモリカードにかかる応力を分散させる。 - 特許庁
To provide different processes for relaxing a residual stress in a welding process in which an added material is accumulated in a plurality of paths of a joint between two members. 2つの部材間の継手の複数のパスに追加材料を堆積させることを備える溶接プロセスにおける内部応力を緩和するための異なるプロセスを提供することを目的とする。 - 特許庁
To provide a lifting tool having a lightweight and simple structure which is capable of suppressing the bending stress and the deflection of a lifting beam and reliably lifting a cargo such as reinforcing bars of low bending rigidity. 軽量で且つ簡単な構造で、天秤の曲げ応力や撓みを抑えることができ、しかも低曲げ剛性の鉄筋等の吊り荷を確実に揚重することができる。 - 特許庁
Further, additional concrete placement 21 is carried out on a downstream side of the concrete dam, and therefore application of tensile stress to a portion of a crack 100 is avoided, to thereby prevent cracks from occurring. また、コンクリートダムの下流側にコンクリートの増打ち21を行うことにより、クラック100の部分に引張応力が作用するのを防いで、クラックの発生を抑制することができる。 - 特許庁
To reduce defects in a conventional technique by suggesting a moving blade for a high pressure turbine having a new shape to prevent cracks, to prevent lowering of mechanical strength as a whole of the blade to be a part applied with extremely large mechanical stress, and to provide the high pressure turbine for a turbomachine. 亀裂を防止する新しい形状を有する高圧タービンのための動翼を提案することによって、従来の技術に見られる欠点を軽減する。 - 特許庁
In the case where diameter of the balls 3 in each ball train is formed same with each other, load distribution in both ends of a nut 2 becomes high because of the force to be applied in the axial direction of a screw shaft 1, and the stress becomes uneven. 各ボール列のボール3の径が同じであると、ネジ軸1の軸方向に加わる力によって、ナット2の両端部には負荷分布が高くなり、応力が不均一となる。 - 特許庁
Preferably, the stiffener 5, in which an end 5a, in the direction of revolution, of the pipe body is formed in a tapered shape, is fixed to the pipe bodies 3 and 4 by welding, so that the production of concentrated stress can be reduced. 前記補剛材5は、管体周回方向端部5aをテーパー状に形成したものとし、管体3、4に溶接固着して集中応力の発生を低減した方がよい。 - 特許庁
To provide heat for connection/electrical conductive film, in which the thermal resistance is low, while relieving the thermal stress for a connecting part, and furthermore, adhesive properties, PCT resistance and heat cycle resistance are superior. 接続部分の熱応力を緩和しつつ、熱抵抗が低く、更に接着性、耐PCT性及び耐ヒートサイクル性に優れた接続用の熱・電気伝導性フィルムを提供することである。 - 特許庁
To provide a surface acoustic wave device which reduces the influence of stress due to the coefficient difference of thermal expansion between a surface acoustic wave chip and a circuit board and prevents a connection failure caused by heat from being generated. 表面弾性波チップと配線基板の熱膨張係数差による応力の影響を削減し、熱による接続不良を発生させない表面弾性波デバイスを提供する。 - 特許庁
To provide an LED lamp in which peeling due to thermal stress never occurs even in a high temperature process. LEDランプにおいて、表面に微細な凹凸が多く接着力に優れた銅とレジストとの接着部分を設けることで、高温工程下でも熱応力による剥離を生じないこと。 - 特許庁
To provide a boom of a working vehicle, which enables an increase in durability by reducing tensile stress applied to a lower wall of the boom, or which enables cost reduction, weight reduction, etc., by enabling the increase of the durability. ブームの下壁に加わる引張応力を低減して耐久性を向上できるようにし、又は、これによってコストダウン、軽量化等を可能にした作業機のブームを提供する。 - 特許庁
After the bolts, etc., and nuts on the market are used just the way they are for the joint portions of structural members (a beam, a column, a sill, etc.), in the case of the execution of work, they are covered with metallic materials utilizing the spontaneous rotation stress of a spring. 構造材の仕口部分(梁・柱・土台等)で市販のボルト類・ナットをそのまま施工した後に、ばねの自然回転の応力を利用した金物をその上にかぶせる。 - 特許庁
The hollow structure is comprised of a connecting bent bolt 6 which passes through each member center and functions to make transfer of stress uniform in a contact surface, to thereby ensure the connection between the side wall member 2 and the upper wall member 3. 部材中心を通る接合用曲がりボルト6により、応力伝達が接合面で均一となるようにし、側壁部材2と上壁部材3との接合を確実にする。 - 特許庁
To provide a method for effecting periodic inspection of a plant, having a level holding mechanism for a spring support frame and the spring support frame capable of preventing a stress from applying on mechanical equipment, such as piping, during periodic inspection. 定検時に、配管等機材に応力がかかるのを防止することができるばね支持架台のレベル保持機構及びばね支持架台を備えたプラントの定検方法を提供する。 - 特許庁
To provide a line head which minimizes an influence on a printing result even in the acute generation of heat from only a head chip by minimizing an influence exerted by distortion associated with the generation of thermal stress. 熱応力の発生に伴う歪みによる影響を最小限にし、急激にヘッドチップのみが発熱しても、印画結果への影響を最小限とするラインヘッドを提供する。 - 特許庁
To prevent the occurrence of a crack in an outer peripheral part of an LSI mounting part by shaping a substrate so that any stress can be prevented from being generated in the outer peripheral part of the LSI mounting part in forming a card. カード化時にLSI実装部の外周部に応力を発生させない基板形状とし、LSI実装部の外周部のクラックの発生を防止できるようにする。 - 特許庁
A waist elastic element 24 is arranged in the second expansible area 13B, whereby the second expansible area 13B has elongational stress higher than the first expansible area 13A. 第2伸縮域13Bにはウエスト弾性要素24が配設されており、それによって、第2伸縮域13Bは、第1伸縮域13Aよりも高い伸長応力を有している。 - 特許庁
To solve the problem that, as the defect of austenitic stainless steel, when it is exposed to an environment containing chlorine, chloride or the like, pitting corrosion or abnormal corrosion, and, further, stress corrosion cracking or the like occur by applying a corrosion preventive film having corrosion resistance on the surface as a countermeasure therefor. オーステナイト系ステンレスの欠点として、塩素や塩化物などを含む環境にさらされると、孔食や異状腐食さらには応力腐食割れなどを発生する。 - 特許庁
A tread force detection device includes a strain detecting member 25 which is provided in a deformation part 24 in a stress transmission member 22 having a rolling bearing 21 internally arranged in a radial direction. 転がり軸受21を内側に取着するラジアル方向に配設された応力伝達部材22における変形部24に歪検出部材25を設ける構成としたものである。 - 特許庁
A rate of change of a KYN concentration in blood or a rate of change of a TRP concentration in the blood is measured after the exercise in the mammal, and a degree of the stress is measured using a value therein as an index. 哺乳動物の運動負荷前後における血中KYN濃度の変化率または血中TRP濃度の変化率を測定し、その値を指標とし、ストレスの度合を測定する。 - 特許庁
With this configuration, the semi-stress relaxation layer 140 is closed to the outer periphery, and thus the piezoelectric element 100 can have the strength against the load in a direction vertical to a stacking direction Z. これにより、準応力緩和層140は外周に対して閉じられているため、圧電素子100は積層方向Zに垂直な方向の荷重に対して強度を有する。 - 特許庁
In an expanded strain area, ground material and ground can be evaluated using a nonlinear model, which can express the shear stress-shear strain relationship of the material with good accuracy. 広範囲のひずみ領域で材料のせん断応力−せん断ひずみ関係を精度良く表現できる新たな非線形モデルを使用して地盤材料及び地盤を評価する。 - 特許庁
To provide a manufacturing method of a semi-conductor apparatus capable of reducing the stress exerted in a protective cap during the dicing, and suppressing degradation of the reliability of the protective cap against a structural body. ダイシング時に保護キャップに作用する応力を低減し、且つ、構造体に対する保護キャップの信頼性の低下を抑制することのできる半導体装置の製造方法を提供する。 - 特許庁
Thereby, when the supporting member 75 is pushed by a force F' near the center thereof, the deflection amount of the supporting member 75 can be suppressed, the stress to the printed board 1 can be prevented, and thus the total strength can be increased. これにより、支持部材75を中央付近から力F’で押したとき、支持部材75のたわみ量を抑え、プリント基板1のストレスを防止し、全体の強度を増すことができる。 - 特許庁
In the element forming region 1a of an n-MOSFET 2, each of the X direction and the Y direction is given a tensile stress by a first insulating film buried in an STI 6a. n−MOSFET2の素子形成領域1aは、STI6aに埋め込んだ第1の絶縁膜によりX方向、Y方向のそれぞれに引張応力が与えられている。 - 特許庁
To provide a rolling bearing cage having improved manufacturing efficiency while relaxing stress concentration on connection portions between each annular plate and each connection pin, and to provide a rolling bearing. 環状板と連結ピンとの連結部分への応力集中を緩和するとともに、生産効率を向上させ得る転がり軸受用保持器および転がり軸受を提供する。 - 特許庁
To provide a measuring device of an electronic part capable of changing a pressing force by a fixed stroke, and avoiding a large stress to be applied to the electronic part at an initial stage of the stroke. 一定のストロークで押し付け力を変えることができ、ストローク初期において電子部品に大きなストレスを及ぼすのを回避できる、電子部品の測定装置を提供すること。 - 特許庁
To provide an IC tag that can maintain its functions and does not easily receive mechanical damage even when it is used while being attached on a product or a commodity that tends to be under bending stress. 曲げ応力がかかりやすい製品や商品に添付して使用した場合にも、その機械的損傷が生じにくく、ICタグ本来の機能を維持できるICタグを提供すること。 - 特許庁
As a result, when the suction and fixation of the expand tape 23 is released after the formation of the reforming area 7 to separate the table 52 from the tape 23, no large stress acts on the workpiece 1. これにより、改質領域7の形成後に吸着固定を解除して、テーブル52とテープ23とを離隔させても、加工対象物1に大きな曲げ応力が作用することはない。 - 特許庁
In a superconducting coil, initial stress is given beforehand to a superconducting wire 12 wound on a winding frame 10 in its circumferential direction, when the wire 12 is fixed to an electrode 14. 本発明に係る超電導コイル装置は、巻枠10の周方向に沿って巻回させた超電導線材12を電極部14に固着させる際、予め初期応力を与えた。 - 特許庁
To provide a terminal which has high contact reliability since a prescribed contact pressure can be secured by securing the long spring length and has a long life since stress concentration is hard to occur. 長いバネ長を確保することにより、所定の接点圧力を確保でき、接触信頼性が高いとともに、応力集中が生じにくく、寿命の長い端子を提供する。 - 特許庁
To provide a camera capable of preventing an excessive stress from being applied on a flexible printed board for electrically connecting a shutter unit to a camera main body, and which is made compact and constituted at a low cost. シャッターユニットとカメラ本体とを電気的に接続するフレキシブルプリント基板に対し余分なストレスをかけることがないとともに、コンパクトで安価な構成のカメラを提供する。 - 特許庁
To solve a problem in which when an optical fiber is joined with a metallic fixing member with a glass sealant, airtight sealing becomes insufficient and further a stress is applied to the optical fiber to cause deterioration in optical characteristics. 光ファイバを金属製固定部材にガラス封止材を介して接合する際、気密封止が不十分となり、さらに光ファイバへストレスが加わることで光学特性が劣化する。 - 特許庁