「Time difference」を含む例文一覧(5725)

<前へ 1 2 .... 49 50 51 52 53 54 55 56 57 .... 114 115 次へ>
  • To correct operation environment of mounting machines to improve mounting accuracy of components when there is difference in tact time among a plurality of mounting machines constituting a mounting line.
    実装ラインを構成する複数の実装機間でタクトタイムに差がある場合、実装機の動作環境を修正し、部品の搭載精度を向上できるようにする。 - 特許庁
  • To provide an automobile occupant's head protecting bag capable of supplying gas equally to each chamber of the bag or supplying gas to each chamber with specified time difference.
    バッグの各室に均等にガスを供給したり、各室に所定の時間差をもたせてガスを供給することが可能な自動車乗員頭部の保護バッグを提供する。 - 特許庁
  • The charging apparatus detects the charging current flowing in the battery on a socket part after a definite time interval from starting discharging, by using the difference in the current characteristics.
    本充電装置は、この電流特性の違いを利用し、充電を開始してから一定時間後にソケット部の電池に流れる充電用の電流を検出する。 - 特許庁
  • However, since there is a time difference from the occurrence of the win reservation to the start of the symbol variation, the number of variations of the symbol may reach the prescribed number of times during the period.
    但し、当り保留発生から図柄変動開始までには時間差があるので、その間に図柄の変動回数が規定回数に達してしまうことも起こり得る。 - 特許庁
  • The variables of the evaluation equation are the results of the first recursion in frequencies of pitch components and time difference of utterance speed between the rhythm prediction results and sound piece data.
    評価式は、韻律予測結果−音片データ間におけるピッチ成分の周波数の1次回帰の結果や発声スピードの時間差を変数とするものである。 - 特許庁
  • The wait time up to the determination of the integer value bias (ambiguity) is not required because the integer value bias (constant value) is erased in computation of the double phase difference change rate.
    二重位相差変化率の演算の際に整数値バイアス(定数値)は消去されるから、整数値バイアス(アンビギュイティ)の決定までの待機時間は不要である。 - 特許庁
  • The control part 21 adjusts the number of log-in allowance recorded in the log-in allowance number data storage part 26 based on the difference between the target value and the measured response time.
    制御部21は、目標値と測定したレスポンス時間との差分に基づいて、ログイン許容数データ記憶部26に記録されたログイン許容数を加減する。 - 特許庁
  • At a time of coating-OFF, flowmeter deviation is measured on the basis of the difference between the coating material amt. of the coating material feed flowmeter 1A and that of the coating material return flowmeter 1B.
    塗装オフ時には、塗料行き流量計1Aの塗料量と塗料戻り流量計1Bの塗料量との差分により流量計偏差を測定する。 - 特許庁
  • Thus, a target access time is obtained by software for the mechanism in which a relatively large difference exists between the moving speed of the head 2 and an average moving speed during access.
    したがって、光学ヘッドのアクセス時の移動速度が平均値に対して比較的大きな差があるメカニズムでも、目標のアクセスタイムが得られるようソフトウェアで対応できる。 - 特許庁
  • To test a model using time-based scheduling, and to verify the CPU load rate and the maximum cycle difference of a task when needed.
    モデル検査において時間スケジューリングを想定したモデルを扱うことを可能とし、また必要に応じてCPU負荷率・タスクの最大周期差を検証する事を可能とする。 - 特許庁
  • The purpose can be realized by correcting the phase exciting time and phase exciting position of the stator of a stepping motor depending on the difference of phase angle between the stator and the rotor of the stepping motor.
    ステッピングモータの固定子の相励磁時間、および相励磁位置を、ステッピングモータの固定子と回転子の位相角の角度差に応じて、補正することにより実現できる。 - 特許庁
  • To reduce a sense of incongruity resulting from a divergence of focus and shorten a focusing time even when accuracy of focal position detection using a phase difference detection system is not secured.
    位相差検出方式などによる合焦位置検出精度が確実でない場合においても、ピント変化の違和感を軽減し、合焦時間の短縮を図る。 - 特許庁
  • To prevent a specifying time from becoming longer even when a temperature of delay elements, etc., is changed when the number of elements with a phase difference of 360 degrees is specified in order to generate a reference clock.
    参照クロックの生成のために、360度の位相差の素子数が特定される際に、遅延素子の温度等が変化しても、特定時間が長くならないこと。 - 特許庁
  • A significant difference in a rate of an aging of a bread with time is recognized even when the rice powder is contained instead of a part of the flour, and the property excelling in a maintenance of a quality is also recognized.
    小麦粉の一部に代えて米粉を含有しても経時的なパンの老化の速度に有意な差が認められ、品質の維持に優れた性質が認められる。 - 特許庁
  • To provide a delay profile-measuring apparatus which can calculate a delay profile regardless of a delay time difference between a desired wave and a delay wave, and to provide digital broadcast receiver.
    希望波と遅延波の遅延時間差に関係なく遅延プロファイルを算出することができる遅延プロファイル測定装置およびデジタル放送受信機を提供する。 - 特許庁
  • Based on the results of comparison at the step S10, it is determined whether a difference between the location information acquired this time and the latest location information is a prescribed distance or more (step S11).
    ステップS10での比較結果に基づき、今回取得した位置情報と直近の位置情報との差が所定の距離以上あるか否かを判断する(ステップS11)。 - 特許庁
  • If the difference between the previous frequency and the present frequency is large, such as when the temperature varies greatly, the next stop time is set to be short.
    従って、前回の周波数と、今回の周波数との差分が大きい場合、例えば、温度変化が大きい場合には、次回の停止時間が短く設定される。 - 特許庁
  • To save time and effort in attaching a sensor and eliminate individual difference in the attachment, when measuring a surface temperature of a pipe with a temperature sensor, and to simplify wiring at a measurement spot.
    配管の表面温度を温度センサで計測するにあたり、センサの取り付け時の手間や取り付けの個人差を解消し、計測箇所の配線を簡素化する。 - 特許庁
  • As a result, even if the PND 1 is unable to receive a GPS signal, the PND is able to use the time difference velocity VT as the velocity of the vehicle 9.
    この結果PND1は、GPS信号を受信することができない場合であっても、車両9の速度として当該時間差速度VTを用いることができる。 - 特許庁
  • D is the group delay difference of an optical signal received by each optical receiver 2, and T is one symbol time of an optical signal received by each optical transmitter 1.
    ここで、Dは各光受信機2が受信した光信号の群遅延差であり、Tは各光送信器1が送信した光信号の1シンボル時間である。 - 特許庁
  • To provide a gravity concentration device for waste resin flake efficiently separating mixture of waste resin flake having fine specific gravity difference in a short period of time.
    比重差の微小な廃棄樹脂フレークの混合物を短時間に効率良く比重選別することができる廃棄樹脂フレーク用比重選別装置を提供する。 - 特許庁
  • Delay amounts of the delay circuit 19 and 20 correspond to a time difference between sounds reaching both ears, so that sound effects can be obtained which are nearly natural and give a feeling of spreading.
    遅延回路19,20での遅延量は、両耳に届く音の時間差に対応するので、自然に近く、かつ広がりを感じさせる音響効果が得られる。 - 特許庁
  • Upper arm pulse wave propagation speed (upper arm PWV) is determined based on appearing time difference between an ejection wave and a reflection wave of the upper arm pulse wave (S109, S111).
    また、上腕脈波における駆出波と反射波との出現時間差に基づいて、上腕脈波伝播速度(上腕PWV)が算出される(S109,S111)。 - 特許庁
  • The motor control circuit 6 reads out a current value detected by the current detection circuit 7 at predetermined time intervals and calculates a difference value from the value previously read.
    モータ制御回路6は、所定時間間隔で、電流検出回路7によって検出された電流値を読み込むと共に、前に読み込んだ値との差分値を計算する。 - 特許庁
  • To provide a method capable of producing products small in individual difference and uniform at a constant speed and stably even in the case of conducting droplet polymerization continuously for a long time.
    液滴重合を長時間継続して実施しても、個体差が小さくて一様な製品を一定速度で安定に製造することができる方法を提供すること。 - 特許庁
  • To provide an ultrasonic concentration meter capable of measuring a concentration of a fluid accurately without using a temperature sensor by using the principle of a time difference type ultrasonic flowmeter.
    時間差式の超音波流量計の原理を利用して、温度センサを用いることなく、流体の濃度を精度良く測定可能な超音波式濃度計を得る。 - 特許庁
  • A beat frequency f1 is known from the beat signal, so that the delay time difference is further calculated using modulation repetition cycles T and a modulation width β.
    ビート信号よりビート周波数f1が判明するので、さらに変調繰り返し周期T、変調幅βを用いて遅延時間差を算出することができる。 - 特許庁
  • To cut waste from power in a fixation part to achieve power saving by reducing a time difference between setup completion in wizard format and warm-up completion in the fixation part.
    ウィザード形式での設定完了の時点と定着部のウォームアップ完了の時点を近づけることにより、定着部での電力の無駄を無くして省電力を図る。 - 特許庁
  • The clock-phase-difference measuring instrument 20a outputs information on a corrected distance acquired by adding a correction value to the distance information acquired by measurement with the time measuring instrument 19.
    そして、クロック位相差測定器20aは、フレーム間時間測定器19が測定した距離情報に対して補正値を加算した補正後距離情報を出力する。 - 特許庁
  • The skew amount of the wide paper 2' is detected based on a detecting time difference of the cut mark 60 on the wide paper 2' by the reading sensors 10a and 10b.
    そして、読み取りセンサ10a、10bによる幅広用紙2’上のカットマーク60の検出時刻差に基づいて、幅広用紙2’の斜行量を検出する。 - 特許庁
  • This difference is used to generate a driving signal D to drive a fuel input valve to a desired position at next sampling time t_i+1 in a cycle.
    この差は、サイクルにおける次のサンプリング時間t_i+1における所望の位置へと燃料投与弁を駆動するための駆動信号(D)を発生させるために使用される。 - 特許庁
  • To provide a method of coating a bumper and a bolt-hole cap at the same time to prevent an occurrence of a color difference without requiring a special temporary supporting means temporarily supporting the bolt-hole cap to the bumper.
    ボルト孔キャップをバンパーに仮支持する特別の仮支持手段を必要とせずに、バンパーおよびボルト孔キャップを同時に塗装して色差の発生を防止する。 - 特許庁
  • Therefore, instantaneous power consumption can be reduced by dividing a horizontal line of PDP and discharging them with time-difference and a large screen can be used for a home.
    これにより、PDP の水平ラインを分割して時間差をおいて放電することによって瞬間的な消費電力を低減できて大型画面を家庭用として使用しうる。 - 特許庁
  • When the hit ball returns to a hitting device side after passing through the first sensor, since the second sensor is not turned on and the time difference monitoring timer times out, the advancing ball signal is not outputted.
    打球が第1センサ通過後に発射装置側に戻ったときには、第2センサはオンせず時間差監視タイマがタイムアウトするので、進入球信号は出力されない。 - 特許庁
  • To provide a substrate treatment apparatus which efficiently operates the whole apparatus independent of a difference of treatment time for each treatment when carrying out a plurality of treatment.
    複数の処理を実施する場合において、各処理の処理時間の差異によらず装置全体を効率的に稼動させることが基板処理装置を提供する。 - 特許庁
  • The difference in the time required for processing the image and sound expression effects produced in the previous turn is adjusted till starting the next turn in the respective game machines.
    各ゲーム機において、次のターンが開始されるまでの間に、直前のターンにおいて生じた映像及び音響表現効果の処理に要する時間の相違を調整する。 - 特許庁
  • To provide a laser high-voltage pulse generator, where the difference between its outputs, when it starts operating and at the other time when it is in usual operation is small, and a laser output can always be efficiently taken out.
    動作開始直後と定常運転時における出力差が小さく、かつ、常に効率良くレーザ出力を取り出せるレーザ用高電圧パルス発生装置。 - 特許庁
  • The zero-phase voltage Vo, the zero-phase current Io, and the phase difference between the zero-phase voltage and the zero-phase current are acquired at a set period and variation in time series data is monitored.
    零相電圧Vo、零相電流Io、零相電圧と零相電流の位相差を設定周期で取得しておき、時系列的なデータの変化を監視する。 - 特許庁
  • When the "ON" state of the SW-b can not be detected, a velocity is found from the contact time difference between the SW-a and SW-c, and when the SW-a is "OFF", a key-OFF state is decided.
    SW−bで「オン」が検出できないときSW−aとSW−cの接点時間差からベロシティを求め、SW−aの「オフ」でキーオフする。 - 特許庁
  • A time difference until the update of the duty command value is restrained to the minimum while reducing the A/D starting interruption, and stable motor control is made.
    A/D開始割込を低減させながら、デューティ指令値の更新までの時間差を最小限に抑えることができ、安定したモータ制御を行うことが可能となる。 - 特許庁
  • To perform grasp of failure cause and restoration in a short time when the same software is present in a plurality of servers and when difference is detected in a setting file for the software.
    同一のソフトウエアが複数のサーバにあって、ソフトウエアの設定ファイルに差異が検出された場合に障害原因の把握および復旧を短時間で行う。 - 特許庁
  • To reduce the difference in density of read data of both front and rear sides in double-sided automatic reading for reading images of both the front and rear sides of an original by one-time transfer of the original.
    原稿の一度の搬送で原稿の表裏両面の画像を読み取る両面自動読み取りにおいて、表裏両面の読み取りデータの濃度差を低減する。 - 特許庁
  • To determine and notice estimation time until DPF forcible regeneration timing due to PM over accumulation, and determine trouble caused by abnormality of an exhaust gas flow rate value and a DPF pressure difference value.
    PM過堆積によるDPFの強制再生時期までの予測時間の判定と告知、及び排ガス流量値やDPF差圧値の異常による不具合の判定。 - 特許庁
  • To reduce a difference between an experienced player and an inexperienced player for the quantity of game media in hand at the point of time when ending a series of a games.
    一連の遊技を終えた時点で手持ちの遊技媒体の数量について熟練の遊技者と未熟な遊技者との間で生ずる差が少なくなるようにする。 - 特許庁
  • Also, when the time difference of the light projection timing of each representative scanning point is the minimum light projection interval Lmin or more, the calculation ends as a calculation success (S407).
    また、各代表走査点の投光タイミングの時間差が最小投光間隔Lmin以上であれば、計算成功として計算を終了する(S407)。 - 特許庁
  • To accurately estimate thermal displacement of a spindle in all operating conditions from the transit state to the steady state by filling up a time constant difference of temperature and thermal displacement.
    温度及び熱変位の時定数差を埋めて、過渡状態から定常状態までの全ての運転状況において、主軸の熱変位を正確に推定する。 - 特許庁
  • To eliminate difference in the adhesiveness of a resin to a substrate due to a variation in the standby time from the end of development to a heating step and to provide a stable patterning method.
    現像終了から加熱工程までの待機時間の違いによる樹脂と基板との接着性の差を無くし安定なパターン加工方法を提供する。 - 特許庁
  • To move an upper elevator cage and a lower elevator cage smoothly all the time even if a difference in floor height changes.
    階高の差が変化している場合であっても、上部かご室と下部かご室の移動を常に円滑に行うことができるようなダブルデッキエレベータ装置を提供すること。 - 特許庁
  • The phase and the amplitude of the rotating speed variation changed in a sinusoidal wave (amplitude is proportional to eccentricity amount) state in the rotation cycle of the motor are calculated based on the difference of time.
    この時間差をもとにモータの回転周期で正弦波(振幅は偏心量に比例する)状に変化する回転速度変動の位相と振幅を算出する。 - 特許庁
  • To shorten a drying time for suppressing deformation of a recording medium after recording and to decrease a difference in concentration of a recording image in an inkjet recording using a water-based ink.
    水性インクを用いたインクジェット記録において、記録後の記録媒体の変形を抑制するための乾燥時間を短縮し、かつ記録画像の濃度差を低減する。 - 特許庁
<前へ 1 2 .... 49 50 51 52 53 54 55 56 57 .... 114 115 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.