「angular」を含む例文一覧(6017)

<前へ 1 2 .... 87 88 89 90 91 92 93 94 95 .... 120 121 次へ>
  • In the second step, angular momentum around the center of gravity at each time on the target track of the center of gravity is calculated by applying a mass point model of the legged robot to the obtained center of gravity and the target track of the legs.
    第2ステップでは、得られた重心と足の目標軌道に脚式ロボットの質点モデルを適用して重心の目標軌道上の各時刻における重心回りの角運動量を算出する。 - 特許庁
  • This ink composition for a ballpoint pen has 1.0 or less of tanδ at the angular frequency of 100 (rad/s) measured within 5 seconds at 25°C after applying shearing for 20 seconds at the shearing rate of 1,000 (1/s) at 25°C.
    25℃において、剪断速度1000(1/s)の剪断を20秒間かけた後、25℃での、5秒以内に測定される角周波数が100(rad/s)でのtanδの値が1.0以下であるボールペン用インキ組成物。 - 特許庁
  • Each of the setting values for a plurality of designated items related to the recording condition corresponding to linear velocity at a recording position on a recording surface is captured for the optical disk spinning at constant angular velocity (CAV) (step 557).
    角速度一定(CAV)で回転している光ディスクの記録面における記録位置での線速度に応じた記録条件に関連する所定の複数項目の各設定値をそれぞれ取得する(ステップ557)。 - 特許庁
  • Because this kind of angular selective reflection film is installed therein, signal light (reproduced light in reproduction) is reflected and reference light is transmitted, in accordance with a difference of incident angles on the medium between the signal light and the reference light.
    このような角度選択反射膜を設けるで、信号光、参照光の媒体入射角度の差に応じて、信号光(再生時には再生光)は反射し、参照光は透過させることができる。 - 特許庁
  • In a position calculation terminal, the position of a mobile unit is calculated by a position calculation means 1 using an absolute position detection sensor such as GPS, a distance sensor such as vehicle speed pulse, and an angular speed sensor such as vibrating gyro.
    位置算出端末において、GPSなどの絶対位置検出センサ、車速パルスなどの距離センサ、振動ジャイロなどの角速度センサなどを用いて、位置算出手段1によって移動体の位置を算出する。 - 特許庁
  • According to the change in estimated value of EGR rate and crank angular speed, the sub-injection amount is controlled to optimize the ignition timing of the pre-mixed air-fuel, whereby heat generation pattern having high cycle efficiency can be realized to improve fuel consumption.
    EGR率の推定値やクランク角速度の変化に基づいて副噴射量を制御することで予混合気の着火時期を最適化し、サイクル効率の高い熱発生パターンを実現して燃費の改善を図る。 - 特許庁
  • An angular sealed battery includes a large side surface of greater distortion with at least a part of the light case cleaved by increase of the internal pressure of the battery.
    角型の密閉型電池において、電池内部の圧力上昇によって開裂する薄肉部の少なくとも一部分が電池の側面の面積が大きな面の変形の大きな領域に形成した角型の密閉型電池。 - 特許庁
  • A change range setter 14 determines a static state by whether the change width of an angular velocity is below a prescribed value or not, and a static state determiner 20 determines whether the static state is continued over a determination time or not.
    変化範囲設定器14は角速度の変化幅が所定値以下であるか否かで静止状態を判定し、静止判定器20は判定時間を超えて静止状態が継続しているか否かを判定する。 - 特許庁
  • When the external force increases and the pressure in the main air chambers becomes below the specified value, the product is protected from the impact from the side directions and the angular directions by the main air chambers and the sub air chambers [refer to Fig. (c)].
    外気圧が上昇し、主空気室の圧力が一定値未満になった場合、主空気室及び副空気室によって製品20を辺方向及び角方向の衝撃から保護する((c)参照)。 - 特許庁
  • To provide a measuring device capable of measuring accurately in a short time, an angular shape of a pile of a raw material such as iron ore or coal conveyed by a ship, a track or the like, and piled up in a yard of an iron mill or the like.
    船舶やトラック等で運搬され、製鉄所等のヤード内に積み上げられた鉄鉱石や石炭等の原料の山の山形形状を、正確かつ短時間で計測可能な計測装置を提供する。 - 特許庁
  • In an angular velocity sensor, a rotary oscillator 4 is mounted to a substrate 1 via a supporting part 2 and rotary supporting beams 3, and the rotary oscillator 4 is rotated and oscillated about an axis O1-O1 by oscillation generating parts 12A to 12D.
    基板1には、支持部2、回転支持梁3を介して回転振動体4を取付け、この回転振動体4を振動発生部12A〜12Dによって軸線O1 −O1 を中心に回転振動させる。 - 特許庁
  • One end of a main body composed of a thin and long plate member is bent in curvature in a specific angular range, and the bent part is cut at a center to be forked to form insert parts.
    細長板体よりなる本体の一端を所定角度範囲内にて湾曲状に折曲させるとともに、この折曲部中央を切除した二股部分よりなる挿入部を形成したことを特徴とする。 - 特許庁
  • The bearing unit for a wheel comprises an internal shaft 1, an outer ring 2 arranged on a periphery of the internal shaft 1, and rolling bodies 3a and 3b arranged between the internal shaft 1 and outer ring 2 so as to have an angular contact between the internal shaft 1 and outer ring 2.
    内軸1と、内軸1の周囲に配設される外輪2と、内軸1と外輪2とにアンギュラコンタクトとなるよう内軸1と外輪2との間に設けられる転動体3a,3bとを備えている。 - 特許庁
  • An encoder 84 in which characteristics of a surface to be detected are alternately varied is arranged at the outer peripheral surface of an inter-inner ring seat 81 arranged between inner rings 22, 32 of the pair of angular ball bearings 20, 30.
    一対のアンギュラ玉軸受20、30の内輪22、32間に配設された内輪間座81の外周面には、被検出面の特性が円周方向に交互に変化するエンコーダ84が設けられている。 - 特許庁
  • When the panel rotates from the panel reception portion to a desired angular position, the slide member slides in relation to the panel reception portion with making the leaf spring to be elastically deformed by the projected portion of the rib to push the rib support portion of the slide member.
    パネルがパネル用受部から所望の角度位置まで回転するとき、リブの凸部がスライド部材のリブ支え部を押すことによって、スライド部材は板ばねを弾性変形しながらパネル用受部に対してスライドする。 - 特許庁
  • An angular difference (5) is provided between the center line ab of a penpoint (3) of an ink core cap (2) and the center line cd of the holder tube (1) by curving a part of the penpoint (3), and the penpoint (3) is projected from the fore end opening (4) of the holder tube (1).
    インク芯帽(2)のペン先(3)の一部を湾曲させてペン先(3)の中心線abと軸筒(1)の中心線cdに角度差(5)を設け、軸筒(1)の先端口(4)からペン先(3)を突出させる。 - 特許庁
  • A marker for applying deflection of an appropriate physical amount selected according to a purpose is made on a sphere and is measured by a sensor provided around the sphere, thereby calculating the angular velocity vector of the sphere.
    球体に、目的に応じて選択した適当な物理量の偏向を与えるマーカーをつけ、球体の周囲に配置したセンサによってこれを計測することによって、球体の角速度ベクトルを算出するものである。 - 特許庁
  • The deterioration in the image due to camera-shake can be reduced by maintaining the shutter speed toward a higher speed without the need for using an angular velocity sensor for shake detection of a camera body and a drive mechanism of an optical system.
    カメラ本体の揺れ検出用の角速度センサや、光学系の駆動機構等を用いなくとも、シャッター速度をより高速側に維持することにより、撮影のぶれによる画像の劣化を軽減することができる。 - 特許庁
  • Angular velocity is detected by the torsional rotating vibration of the detecting vibrator 12 about the z-axis, passing the point O in the state of the driving vibrators 16, 17 which are driven vibratingly in the x-direction passing the point O in the opposite phases.
    駆動振動子16,17が逆相でx方向に振動駆動される状態における検出振動子12の点Oを通るz軸廻りのねじれ回転振動により角速度を検出する。 - 特許庁
  • A rectangular area detecting means 5 detects the ruled lines to be a rectangular area from the scanned digital data stored in the means 1 and the angular deviation of the ruled lines and outputs detection results to a control means 7.
    矩形領域検出手段5は、記憶手段1に記憶されたスキャン後のデジタルデータから矩形領域となる罫線を検出し、この罫線の角度ずれを検出し、検出結果を制御手段7へ出力する。 - 特許庁
  • The turn-back state of steering is determined when the steering angle is increased, and when the steering angular speed at the turn-back steering state is large, the control starting threshold value relative to the braking means is adjusted to become small.
    操舵角が増加するときに操舵の切り返し状態を判定し、切り返し操舵状態のときの操舵角速度が大きい場合に、制動手段に対する制御開始しきい値が小さくなるように調整する。 - 特許庁
  • To provide an angular ball bearing allowing easy fitting of a seal into a seal groove even if a difference in height between shoulders on both sides of the seal groove provided in a counter bore is small, and capable of satisfactorily positioning the seal in the axial direction.
    カウンタボアに設けられるシール溝両側の肩高さの差が小さくても、シール溝へのシールの装着が比較的容易に行え、かつシールの軸方向の位置決め性にも優れたアンギュラ玉軸受を提供する。 - 特許庁
  • For example, the support mechanisms are plurally disposed at prescribed intervals along the extending direction of the support body while being plurally disposed at predetermined angular intervals around side faces parallel to the extending direction of the support body.
    支持機構は、例えば、支持体の延在方向に沿って所定の間隔で複数配列されるとともに、支持体の延在方向に平行な側面の周囲に予め定められた角度間隔で複数配置されている。 - 特許庁
  • This bearing 1 with the sensor is applied to a double row angular ball bearing, and a central position C between rolling faces 5, 6 of both rows is axially deflected to a central position of an axial width of inner and outer rings 2, 3.
    このセンサ付軸受1は複列アンギュラ玉軸受に適用したものであって、両列の転走面5,6間の中央位置Cを、内外輪2,3の軸方向幅の中心位置に対して軸方向に偏らせる。 - 特許庁
  • A driving member 8 provided with a cam follower 8c to be engaged with the 2nd cam groove 4a is moved during the rotation of the cam ring 4 in a prescribed angular range 42 and the barrier 2 interlocking with the member 8 is opened/closed.
    前記回転カム環4が所定の角度範囲内42で回転している間に、前記第2のカム溝4aに係合するカムフォロア8cを備えた駆動部材8が移動して、これに連動するバリア2が開閉する。 - 特許庁
  • As a reaction, the reduced portion of angular momentum is added to the rotator 11 to rotate the rotator 11.
    このとき、注入された電子のスピン分極が緩和されて、注入される電子全体の角運動量が低下し、その反作用として、低下した分の角運動量が回転子11に追加されて、回転子11が回転する。 - 特許庁
  • When the direction of the oscillator 100 is in angular ranges B and C, the ultrasonic beam is reflected by the acoustic mirrors 110a and 110b, respectively, and transmitted to and received from the subject through the opening film 106.
    振動子100の方向が角度範囲B及びCにある時は、それぞれ超音波ビームが音響ミラー110a及び110bで反射して開口膜106を通過し、被検体内に送受される。 - 特許庁
  • The orientation featuring section is constituted to support the bushing so that the bushing can movably be arranged to the main body, and also, the bushing can accept the screw at a plurality of angular directions to the length directional axis of the main body.
    方向付け機能部は、ブシュが本体に対して移動可能に配置可能で、かつブシュが本体の長さ方向軸に対して複数の角度方向でネジを受容できるように、ブシュを支持するように構成されている。 - 特許庁
  • In a multi-axes sensor 1 which measures any one or a plurality of a multi-axes force added from outside, a momentum, an acceleration, and an angular acceleration, the plurality of the strain gauges R11 to R48 on one plane are mounted.
    外部から加わった多軸の力、モーメント、加速度、角加速度のいずれか1つまたは複数を計測する多軸センサ1において、一平面上に配置された複数の歪みゲージR11〜R48を備える。 - 特許庁
  • Electrical supply is performed from a second electrical supply point 22 provided in the vicinity of the angular part far from the first electrical supply point 12 at the lower side of the second board 21 to a second antenna element 23 provided at the back side of the second board 21.
    第2基板11の下辺の第1給電点12から遠い方の角部近傍に設けた第2給電点22から、第2基板21の背面側に設けた第2アンテナ素子23に給電する。 - 特許庁
  • Because the angular velocity sensors and the acceleration sensor are disposed on the back face side of the display unit, the movement operation of the device and screen scrolling can be matched as much as possible, thus providing excellent operability.
    本発明では、角速度センサ及び加速度センサが表示部の裏面側に配置されているので、装置の移動操作と画面のスクロールとを可能な限り合致することができ、操作性に優れたものとなる。 - 特許庁
  • To correctly determine that the tire air pressure is dropped to the warning value based on the degree of dispersion between rotational angular velocities of respective wheels irrespective of the characteristic of tires actually fitted to a vehicle.
    車両に実際に装着されたタイヤの特性にかかわらず、タイヤ空気圧が警報すべき空気圧まで低下したことを各車輪の回転角速度間のばらつきの程度に基づいて正確に判定すること。 - 特許庁
  • In the case of this embodiment, the grease 61 is filled or exchanged at the time of assembling or disassembling/maintenance of the steering gear 11 and a lubrication is carried out for a row of gears 40, a ball screw mechanism 57 and a double row angular ball bearing 45.
    本実施形態の場合、グリース61は、ステアリングギヤ11の組立時や分解整備時に充填あるいは交換され、ギヤ列40とボールねじ機構57と複列アンギュラ玉軸受45との潤滑に供される。 - 特許庁
  • Angular velocity ratios of the two-lobe elliptical gears are not constant, the sorting arm starts at a comparatively slow speed, it reaches a sufficient speed when pushing out the article, it becomes slow again after pushing, and it is positioned in a stopping position.
    楕円二葉歯車は角速比が一定でなく、仕分けアームは比較的遅い速度で始動し、物品を押し出す際には十分な速度に達し、押し出し後には再び遅くなって停止位置に位置決めされる。 - 特許庁
  • Quick angular change in the bottom corner parts 31c is eliminated to relax local stress concentration when applying a pressure for close contact, and thus the occurrence of cracks in these parts is prevented to realize a high transfer quality as well as the durability.
    底角部31cでの急激な角度変化をなくし、密着圧力印加時の局所的な応力集中を緩和して、この部分のクラック発生を防止し、転写品質と耐久性の両立を図る。 - 特許庁
  • Next, in Step S16, the yaw angular acceleration dγ/dt is calculated by using the turning angle δ detected by a turning angle sensor 33 and the calculated cornering powers Kf, Kf, and the side slip angle β of a vehicle body is calculated through the integration.
    次に、ステップS16にて、転舵角センサ33により検出した転舵角δと、計算したコーナリングパワーKf,Krとを用いてヨー角加速度dγ/dtを計算して積分し、車体の横滑り角βを計算する。 - 特許庁
  • To extend the lifetime of an apparatus by preventing strong impact force from acting on a drive mechanism and a support part of an actuator ring, and improve operation reliability of stationary blades by eliminating angular errors between the plurality of stationary blades.
    アクチュエータリングの支持部や駆動機構に大きな衝撃力を作用させないようにして、これら機器の寿命を延ばすと共に、複数の静翼間での角度誤差をなくし、静翼の動作確実性を向上させる。 - 特許庁
  • Further, a shape of each unit coil has an angle of 2π/M in the circumferential direction as viewed from the central axis of the permanent magnet, and is a hexagonal shape having oblique sides equivalent to an angular range of 2π/(N×M) of both ends of the angle of 2π/M.
    そして、単位コイルの形状は、永久磁石の中心軸から見て円周方向の角度が2π/Mで、その2π/Mの両端の2π/(N×M)の角度範囲が斜辺の六角形状となっている。 - 特許庁
  • To provide a driving circuit, a physical quantity detector, an angular speed detector, an integrated circuit device, and an electronic apparatus, which reduce a time until an oscillator is stably oscillated and also can maintain the stable oscillation.
    振動子が安定発振するまでの時間を短縮するとともに安定発振を維持することが可能な駆動回路、物理量検出装置、角速度検出装置、集積回路装置及び電子機器を提供する。 - 特許庁
  • In the aluminosilicate glass substrate for a magnetic recording medium, angular parts existing between a side surface and a chamfered part of the glass substrate and between the principal surface and the chamfered part of the glass substrate are polished to form curved surfaces.
    また、磁気記録媒体用アルミノシリケートガラス基板において、ガラス基板の側面と面取部との間、及びガラス基板の主表面と面取部との間に存在する角張った部位を研磨して曲面とする。 - 特許庁
  • Therefore, the determination part 32 determines that the vehicle is in the theft state and emits warning when the inclination angle of the vehicle is the lower limit value θ or more and the angular velocity of the vehicle is larger than the upper limit value ω.
    そこで、判定部32は、車両の傾斜角が下限値θ以上であって、かつ車両の角速度が上限値ωより大きいとき、車両が盗難状態にあると判定し、警報を発する。 - 特許庁
  • In an activation step until a driving pulley model 31 is rotated and driven and a target rotating speed is achieved by using the vibration analysis model, a simulated condition is used for applying a predetermined angular speed to the driven pulley models 32, 33, 34.
    振動解析モデルにより駆動プーリモデル31を回転駆動させて目標回転数とするまでの立ち上げステップでは、各従動プーリモデル32,33,34に所定の角速度を付与する模擬条件が用いられる。 - 特許庁
  • When the angular aperture of the notched sections 22a-22m of the rotor 20 is θ1 and the protrusions 12a-12n (end sections 12a1-12n1) of the stator 10 is θ2, then the condition [θ1≤θ2] should be satisfied.
    回転子20の切欠部22a〜22mの開角をθ1、固定子10の突部12a〜12n(先端部12a1〜12n1)の開角をθ2とした時、条件[θ1≦θ2]が満足されるように構成する。 - 特許庁
  • the gyroscope disks are turned in counterposing directions or vibrated, in a state where their phases deviate, the influence of the vibration and the quake due to the disturbance is reduce, and the external angular velocity which is applied to the system is measured more precisely.
    ジャイロスコープ・ディスクが、対向する方向に回転するか、位相がずれた状態で振動して、外乱振動および震動の影響を低下させながら、システムに加えられた外部角速度をさらに正確に測定する。 - 特許庁
  • Angular velocity is detected by the torsional rotating vibration of the detecting vibrator 12 about the z-axis which passes through the point O in the state of the drive vibrators 16, 17 being driven vibratingly in the x-direction with opposite phase.
    駆動振動子16,17が逆相でx方向に振動駆動されている状態における検出振動子12の点Oを通るz軸廻りのねじれ回転振動により角速度を検出する。 - 特許庁
  • The grooves 2 and the grooves 5 are equally arranged on the peripheral surface in the number in proportion to an integral ratio, and an angular range of the peripheral surface on which the grooves 2 and 5 are formed is more than an angle dividing 360° by two times of the number in proportion to the integral ratio.
    溝2と溝5は整数比率に比例した本数で周面に等配され、溝2,5の形成される周面の角度範囲は360°を整数比率の比例した数の2倍で除した角度以上である。 - 特許庁
  • The pulley 2 itself is going to vibrate with a variation in angular velocity of the rotational power fed to the pulley 2, but the vibration of the pulley 2 is damped by allowing the friction member 9 to give an appropriate friction force to the pulley 2.
    プーリ2に入力される回転動力の角速度変動でプーリ2自身が振動しようとするが、プーリ2に摩擦部材9により適宜の摩擦力を付与することにより、プーリ2の振動を減衰する。 - 特許庁
  • Then, a mode switch 39 is provided that changes the operations of a first motor 14 and a second motor 15 by inputting the rotation and drive controlling signals 42, 43 and angular velocity 49, 50 from tacho-generators 37, 38.
    そして、回転駆動制御信号42、43と、タコモータ37、38からの角速度49、50を入力して、第1のモータ14及び第2のモータ15の動作を切り替えるモード切り替え器39が設けられる。 - 特許庁
  • The power steering device is provided with an electric motor for driving a hydraulic pump for generating steering assistant force; a vehicle speed sensor; a door sensor; a steering angular velocity sensor; and an electronic control unit for controlling driving of the electric motor.
    本パワーステアリング装置は、操舵補助力発生用の油圧ポンプを駆動するための電動モータと、車速センサと、ドアセンサと、操舵角速度センサと、電動モータの駆動を制御する電子制御ユニットとを備えている。 - 特許庁
  • Therefore, as the small spring 34 is rotated with a small rotational angular velocity and makes an entire stick state, the hurt is not generated even if the elastic force difference (wind up torque difference) between the large spring 64 and the small spring 34 is set to large.
    このため、スモールスプリング34は小さな回転角速度で回転し、全密着状態になるので、ラージスプリング64とスモールスプリング34との弾性力との差(巻取トクル差)を大きく設定しても破損しない。 - 特許庁
<前へ 1 2 .... 87 88 89 90 91 92 93 94 95 .... 120 121 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.