A terminal 24 acting like a master unit of the interphone slave unit 25 stores speech voice data transmitted from the interphone slave unit to a speech opposite party, to a buffer 245 for a prescribed time only and thereafter transmits the data to the speech opposite party. インターホン子機25の親機として機能する端末24は、インターホン子機から通話相手に送られる通話音声データを、所定の時間だけバッファ245に格納した後に、通話相手に対して送信を行う。 - 特許庁
When decoded data are a member code, it is checked at S65 whether or not right and left data are present in a buffer and when they are present, it is checked at S66 whether or not the starting three digits of the member code are '977' or '978'. デコードしたデータがメインバーコードのときには、S65にてバッファ中に左右のデータが揃っているか否かを調べ、揃っていればS66にてメインバーコードの先頭3桁がコード「977」又は「978」であるか否かを調べる。 - 特許庁
In this case, a processing result of frame data by the image processing part 5 is unloaded according to output for one frame of the image data and an output processing of the following frame stored in the image buffer 4 is simultaneously started. この時、画像データの1フレーム分の出力に応じて画像処理部5によるフレームデータの処理結果を待避させるとともに、画像バッファ4に記憶されている後続のフレームの出力処理を起動する。 - 特許庁
When the stored data quantity of the buffer memory increases up to a predetermined upper limit value, the movement of a scanning position along the main scanning direction of a scanning target image in a sub-scanning direction is stopped, and generation of image data is stopped. バッファメモリのデータ蓄積量が所定の上限値まで増加した場合には、スキャン対象画像の主走査方向に沿った走査位置の、副走査方向への移動を停止し、画像データの生成を停止する。 - 特許庁
Delay buffer memories 61C and 61M delay the image data of two colors, C and M, among the image data of four colors, CMYK, stored in the image memory 42 by a preset time T, for outputting. 遅延バッファメモリ61C、61Mは、画像メモリ42に格納されたCMYK4色の画像データのうちのC、Mの2色の画像データを、それぞれ予め設定された時間Tだけ遅延させて出力する。 - 特許庁
According to the result of the arithmetic circuit 26, the selection circuit 32 selects the digital audio signal, output from the expansion processing circuit 28 when there is no error mixed, the data stored in the databuffer 30, when there is an error mixed. 回路32は、回路26の判定結果に従い、エラーが混入していない時には回路28の出力ディジタルオーディオ信号を、エラーが混入している時には補間データバッファ30に記憶されるデータを選択する。 - 特許庁
When the plotting processing is ended to the sub-bands arranged in a main scanning direction, the bit map data generated by each sub- band are read from the band buffer memory 7 as line unit data, and outputted to an output control part 10. 主走査方向に並ぶサブバンドについて描画処理が終了したら、サブバンドごとに生成されたビットマップデータをライン単位のデータとしてバンドバッファメモリ7から読み出し、出力制御部10に出力する。 - 特許庁
The writing of data in the write buffers 20, 21 and the read buffer 45 is permitted only in a cycle asserted by a synchronizing signal 12 for informing of the safe timing of data transfer between the clocks 10, 11. この際、ライトバッファ20、21、リードバッファ45へのデータの書き込みは、クロック10とクロック11の間のデータの受け渡しの安全なタイミングを通知する同期信号12のアサートされたサイクルでのみ許可される。 - 特許庁
A memory monitoring part 12 monitors access to the designated address of a memory 11, and transfers the data of the address to a transmission buffer memory 14 by DMA transfer when access is generated, and transmits the data to a reception memory 24 of the debugger 2. メモリ監視部12は、メモリ11の指定されたアドレスへのアクセスを監視し、アクセスが発生するとそのアドレスのデータをDMA転送により送信バッファメモリ14へ転送し、デバッガ2の受信メモリ24へ送信する。 - 特許庁
In the decoding section 2, the input ES data is decoded, and a speech data AD is output to a decoding buffer 3 and stored, while speech mode information is extracted and output to the muting processing control section 4. 復号化部2では、入力されたESデータEDを復号化して音声データADを復号化バッファ3に出力して保存するとともに、音声モード情報を抽出してミュート処理制御部4に出力する。 - 特許庁
Intermittence recording of data in which a recording operation period and a recording stop period are provided alternately is performed by functions of a drive control part 6 and a microcomputer of an optical disk drive using a data memory 5X as a buffer memory. データメモリ5Xをバッファメモリとして用い、ドライブ制御部6や光ディスクドライブ7のマイクロコンピュータの機能によって、記録動作期間と記録停止期間とを交互に設けるデータの間欠記録を行う。 - 特許庁
An input control means 21 is provided with a data group detection means to employ the point of the data group for the address storage opportunity of an address management means 24, the grasp of buffer storage completion with an output control means 25 and the like. 入力制御手段21は、データ群検知手段を有し、データ群の区切りをアドレス管理手段24のアドレス格納契機、出力制御手段25でのバッファ格納完了把握等に使用する。 - 特許庁
An area A in RAM 103, where MIDI data where time information are added is written is provided with a ring buffer structure and writing is executed by returning to the first address after data is written in the final address. 時間情報の付加されたMIDIデータが書き込まれるRAM103内のエリアAは、リングバッファ構造になっており、最終アドレスにデータが書き込まれた後は、最初のアドレスに戻って書き込みが行われる。 - 特許庁
When the band allocation multiplex instruction J is absent, the channel of the channel selection switch 5 is switched and connected, corresponding to the data storage amount of the input buffers 3-1 to 3-n and the storage data from the input buffer are multiplexed statistically. 帯域割当多重指示Jが無い場合、入力バッファ3−1〜3−nのデータ蓄積量に応じてチャネル選択スイッチ5のチャネルを切替接続し入力バッファからの蓄積データを統計多重する。 - 特許庁
To lighten the load of processing and to obtain economical simple constitution by allowing a CPU to receive specific data update information, directly take only necessary subcoding Q data out of a buffer part, and perform the process. 処理装置を、1チップ化して構成を簡素化すると共に、CPUにはサブコーディングQデータフレームのうち必要なデータ部分のみを処理させることで、処理負担を低減し、経済的で構成簡素にすること。 - 特許庁
Command data generated by a host computer 2 are transferred to an image plotting device 1 and plotting commands required for an image displaying are held on a local buffer memory 4 provided in the device 1 in a command data form. ホストコンピュータ2で生成されたコマンドデータを画像描画装置1に転送し、画像描画装置1内に設けられたローカルバッファメモリ4上には画像表示に必要な描画命令をコマンドデータ形式で持っている。 - 特許庁
After data compression conversion is applied to a received image by DMA control of a memory control section 43, the image processing apparatus performs a series of processes to transfer converted data to the HDD 48 through the buffer area of the image memory 42. メモリ制御部43のDMA制御により、入力画像に対してデータ圧縮変換を施した後、変換データを画像メモリ42のバッファ領域を通してHDD48へ転送する一連の処理を行う。 - 特許庁
The data replication control means 26 functions so as to suitably switch the master volume 21 and the buffer volume 22 as a real data reference destination of the snapshot volume 23 and to minimize an IO load in the master volume 21. データ複製制御手段26は、スナップショット・ボリューム23の実データ参照先として、マスタ・ボリューム21とバッファ・ボリューム22とを適宜切り替え、マスタ・ボリューム21におけるIO負荷を最小化するように機能する。 - 特許庁
A reception buffer 112 is provided for storing a packet of data that meets certain specific conditions and should be directly transferred to an application processing circuit 505, and further, there are provided an empty capacity detection means 113 for detecting an empty capacity of the reception buffer 112, and an empty capacity redirecting means 114 for redirecting the empty capacity of the reception buffer 112 to a transmission source terminal. ある特定の条件に合致し、アプリケーション処理回路505に直接転送すべきデータのパケットを格納する受信バッファ112を設け、さらに受信バッファ112の空き容量を検知する空き容量検知手段113と、受信バッファ112の空き容量を送信元端末に返信する空き容量返信手段114を設けた。 - 特許庁
the plural line buffer type memory LSI with collating function is mainly constituted of a large capacity memory section 11 and a plural line buffer sections 12 with parallel collating function, and performs parallel collating operation for data pre-fetched to the plural line buffer section with parallel collating function from a memory section by receiving a collating command through an external input terminals. 照合機能付き複数ラインバッファ型メモリLSI1は、主に大容量のメモリ部11と並列照合機能付き複数ラインバッファ部12から構成されて、外部入力端子を介して照合コマンドを受けることによりメモリ部から並列照合機能付き複数ラインバッファ部にプリフェッチされたデータに対して並列照合動作を行う。 - 特許庁
Normal data to be reproduced and the lowest transfer rate table in which the lowest transfer rate which can be reduced within a range without causing under-flow in the buffer memory part for respective capacity of the buffer memory part used for a reproducing apparatus and having a plurality of buffer capacity is recorded are recorded in a read-in region Din of the optical disk. 再生すべき通常データと、再生装置に用いられ、複数のバッファ容量を有するバッファメモリ部のそれぞれの容量に対して前記バッファメモリ部がアンダフローを生じない範囲で低下させることができる最低転送レートが記録されている最低転送レートテーブルとを光ディスクのリードイン領域Dinに記録しておく。 - 特許庁
The buffer circuit in the logic circuit block 200 is made a buffer circuit 207 with a select function, in addition to the input terminal of the proper buffer circuit controlled by the output terminal of the NOR circuit 203, an input terminal controlled by the output terminal Q of the scan flip flop 103 for latching the data for scan test from the SCAN_IN terminal is provided. 組合せ論理回路ブロック200内のバッファ回路をセレクト機能付きのバッファ回路207とし、NOR回路203の出力端子から制御される本来のバッファ回路の入力端子に加えて、SCAN_IN端子からのスキャンテスト用のデータをラッチするスキャンフリップフロップ103の出力端子Qから制御される入力端子を設けた。 - 特許庁
The time division switches 1 and 3 of a sequential write/random read system using a switch buffer 1 are provided with a message memory, an address used for both switch buffer and message memory is stored in a read control memory, the address is read by a read controller 5 and the data of the switch buffer or the message memory are read and outputted to a time division frame. スイッチバッファ1を用いたシーケンシャルライト・ランダムリード方式の時分割スイッチ1、3に、メッセージメモリ8を設け、リードコントロールメモリに前記スイッチバッファとメッセージメモリに兼用のアドレスを記憶し、リードコントローラ6により前記アドレスを読み出し前記スイッチバッファ又はメッセージメモリの何れかのデータを読み出して時分割フレームに出力する。 - 特許庁
When the matching (pattern matching) of the input data with any first division data already stored in a first pattern table is not detected, the analyzing part adds the input first division data to a first pattern table and the first analysis buffer. 同部は、入力データが、当該第1の区間データが第1のパターン表にすでに格納されたいずれかの第1の区間データとの一致(パターン一致)を検出しないと、入力した第1の区間データを第1のパターン表および第1の解析バッファに追記する。 - 特許庁
An information adding circuit 12 adds a server identification code A and receiving time B to data received from two server devices 10a, 10b and a comparator 13 compares the information added received data with received data previously stored in a comparing buffer 17 and informs a master processing part of the compared result. 2台のサーバ装置10a、10bからの受信データに情報追加回路12でサーバ識別コードAと受信時刻Bを付加し比較回路13で予め比較バッファ17に格納されている受信データと比較して、上位処理への通知をする。 - 特許庁
A CPU 74 constituting an image processing part 70 temporarily stores run-length data transmitted from an RIP 8, executes parallel movement processing, magnifying/reducing processing, and deformation processing in a run-length data state and then transmits the processed data to a buffer 90 in an exposure part 72. 画像処理部70を構成するCPU74は、RIP8から送信されたランレングスデータを一旦メモリメモリ84に格納した後、ランレングスデータの状態で平行移動処理、拡大縮小処理、変形処理を行って露光部72のバッファ90に送信する。 - 特許庁
Then, completion notification of output and read processing of a read databuffer of the block 2 and a request acceptance signal from the block 1 are supplied to a read data register block 3 and the read data is outputted toward the processing system at which the request is accepted. そしてブロック2の読み出しデータバッファの出力及び読み出し処理終了通知とブロック1から要求受付信号が読み出しデータレジスタブロック3に供給されて、要求の受け付けられた処理系に向けて読み出しデータが出力される。 - 特許庁
An adaptive buffer control system for sequential data transmission predicts the response of a disk unit in advance on the basis of arrangement information on data in a disk type recording medium on which image/sound data are recorded, and controls the increase or decrease of buffering capacity. 映像音声データを記録したディスク式の記録媒体へのデータの配置情報に基づいてディスク装置の応答を予め予測し、バッファリング容量を増減させる制御を行うことを特徴とするシーケンシャルデータ伝送用適応バッファ制御方式。 - 特許庁
The content playback apparatus comprises a restart processing unit 107 which, when the playback of the content file is restarted, sequentially buffers in the buffer 102 content data that indicates the start metadata, data that instructs to skip an analysis up to the playback-restart position, and the content data that has not been played yet. このコンテンツ再生装置は、コンテンツファイルの再生が再開されると、先頭メタデータを示すコンテンツデータと、再生再開地点までの解析のスキップを指示するデータと、未再生のコンテンツデータとをバッファ102に順次バッファリングさせる再開処理部107を含む。 - 特許庁
At least color conversion and dithering are performed on that color image data with the print resolution thus creating dot data indicative of the recording state of ink dots in a print pixel on the print object line and storing the dot data in a buffer BF 14. また、このカラー画像データに関して、印刷解像度において色変換とディザ処理を少なくとも行うことによって、印刷対象ライン上の印刷画素におけるインクドットの記録状態を示すドットデータを作成してバッファBF14に格納する。 - 特許庁
By this configuration, it is possible to synchronize the system clock of the data receiving side (decoding side) with the system clock of the data transmitting side even when a delay fluctuation in a network occurs and also in a configuration for performing processing after storing data in a buffer. 本構成により、ネットワークにおける遅延揺らぎが発生した場合においても、また、バッファに対するデータ蓄積後に処理を実行する構成においても、データ受信側(復号側)のシステムクロックをデータ送信側のシステムクロックに同期させることが可能となる。 - 特許庁
To provide a recording and reproducing apparatus that can materialize seamless high-grade reproduction without causing inconsistency of overflow or underflow in connection of a VBV buffer in reproduction linking data from first MPEG image data to second MPEG image data. 第1のMPEG画像データから第2のMPEG画像データへ繋げて再生させる際に、VBVバッファの接続にオーバーフローやアンダーフローの矛盾が生じることなく、シームレスで高品位な再生を実現させることができる記録再生装置を提供すること。 - 特許庁
To provide an MPEG data reproduction method capable of realizing the seamless and high fidelity reproduction of first MPEG image data and second MPEG image data without generating inconsistency in overflow or under flow at the time of connecting a VBV buffer. 第1のMPEG画像データから第2のMPEG画像データへ繋げて再生させる際に、VBVバッファの接続にオーバーフローやアンダーフローの矛盾が生じることなく、シームレスで高品位な再生を実現させることができる再生方法を提供すること。 - 特許庁
A compression processing part 5 successively reads the image data from the poststage buffer 4, and successively performs data compression to the read image data in parallel with the processing of the correction processing part 3 in a processing order sequentially corresponding to the processing order of the correction processing part 3. 圧縮処理部5は、後段バッファ4から画像データを順次読み出すとともに、読み出された画像データに対するデータ圧縮を、補正処理部3の処理と並行し、かつ、補正処理部3の処理順序と順序的に対応した処理順序で順次行う。 - 特許庁
To provide a recording and reproducing apparatus capable of achieving seamless reproduction with high quality without causing contradiction of overflow and underflow at the connection of a VBV buffer when joining first MPEG image data to second MPEG image data and reproducing the resulting image data. 第1のMPEG画像データから第2のMPEG画像データへ繋げて再生させる際に、VBVバッファの接続にオーバーフローやアンダーフローの矛盾が生じることなく、シームレスで高品位な再生を実現させることができる記録再生装置を提供すること。 - 特許庁
A compressor 0102 that compresses data accumulated in a buffer memory 0101 into fixed-length coded data per the prescribed number of pixels (16×16) block, an image memory 0103 that accumulates coded data, and a control device 0100 that controls input and output of each device and timing of processing are provided. バッファメモリ0101に蓄積された画像データを所定画素数(16×16)のブロック毎に固定長の符号データに圧縮する圧縮装置0102、符号データを蓄積する画像メモリ0103、各装置の入出力や処理のタイミングを制御する制御装置0100を備える。 - 特許庁
A layout verification tool 8 verifies a layout resting on the basis of data stored in the library 6, a wiring layout data file 3, a viahole layout data file 4, and a mask layout pattern 7, the capacitance of an input circuit and the size of an output buffer are obtained and stored in a memory device 10. レイアウト検証ツール8は、ライブラリ6のデータ、配線の配置情報ファイル3、ビア・ホールの配置情報ファイル4及びマスクレイアウトパターン7からレイアウトを検証し、入力回路の容量、出力バッファのサイズ等を求めて記憶装置10に記録する。 - 特許庁
Therefore, at the time of read-out/write-in operation of banks 400, 401 arranged at a position being far from a data input/output buffer 412, a waveform having steep tilt of pre-charge is obtained, not only high speed data processing operation can be secured, but data loss can be prevented. したがって、データ入出力バッファから遠く位置されたバンクの読み出し/書き込み動作の際、急なプリチャージ傾きを有する波形が得られて高速のデータ処理動作を確保することができるだけでなく、データ損失を防止することができる。 - 特許庁
Symbol buffer memories 0-Mnc-1, which insert a delay time for executing the time de-interleave to data of each carrier respectively, is provided to the data of the carrier of the carrier total number nc used as the data in one segment of the partially received signal to be demodulated. 復調する部分受信信号の1セグメント内においてデータとして用いられるキャリア総数ncのキャリアのデータに対して、各キャリアのデータをそれぞれ時間デインターリーブするための遅延時間を挿入するシンボルバッファメモリ0〜Mnc−1を設ける。 - 特許庁
The print data (original data) developed in an image plotting area 32 (the printing/editing region) in a memory section 31 is read by each one line and is applied with mirror-inverting treatment to be supplied to a buffer 33 for mirror-inverting development as mirror-inverting edited data to be stored therein. 記憶部31の描画エリア(印刷編集領域)32に展開された印刷データ(元データ)は、1ラインずつ読み出され、鏡反転処理が施された後、鏡反転編集後データとして鏡反転展開用バッファ33に供給され、記憶される。 - 特許庁
An internet FAX unit 10 stores data 32 from a G3FAX unit 30 temporarily in a FAX control section 12, and a packetizing/depacketizing section 14 packetizes data 34 read out sequentially depending on size information 36 from a size information storage section 16 and then encodes the data before delivering to a buffer section 20 and a UDPTL control section 18. インターネットFAX 装置10は、G3FAX 装置30からのデータ32をFAX 制御部12に一時格納し、パケット化/デパケット化処理部14では順次読み出したデータ34をサイズ情報ストレージ部16からのサイズ情報36に応じてパケットし、符号化してバッファ部20およびUDPTL 制御部18に供給する。 - 特許庁
To solve the problem of time lag, extending from the start of reception to the start of decoding of stream data becomes large, since the decoding is started after the stream data with data quantity equivalent to considerable time is received and stored in a buffer memory on the client side, in the conventional stream distribution method. 従来のストリーム配信方法では、クライアント側で、かなりの時間に相当するデータ量のストリームデータを受信してバッファーメモリに蓄積してからデコードを開始するため、ストリームデータの受信開始からデコード開始までのタイムラグが大きくなってしまう。 - 特許庁
Processing is controlled so as to avoid breaks of data; and when a break of data occurs, processing in at least one of the transmission side and the reception side is interrupted to wait for restoration of a buffer storage volume, and processing is restarted when a certain quantity of the data is stored. バッファリングによってデータが途切れないように処理を制御し、データが途切れそうになったら送信側及受信側の少なくとも一方の処理を中断させてバッファ蓄積量の回復を待ち、ある程度のデータ量が蓄積されたら処理を再開させる。 - 特許庁
A reading control section 103 reads data from a disk 2 loaded in a disk drive 101 via a disk driver 102 and stores it on a shock-proof memory 104, and a reproduction processing section 106 reads the data from the shock-proof memory 104 via a databuffer 105 and reproduces it. 読出制御部103は、ディスクドライバ102を介して、ディスクドライブ101に装着されたディスク2から読み出したデータをショックプルーフメモリ104に格納し、再生処理部106は、データバッファ105を介してショックプルーフメモリ104からデータを読み出して再生する。 - 特許庁
When receiving a writing command of the data from the application device to the card, the interface device writes the data into the buffer and stores them for a short time, constructs and opens a file into the storage equipment of the electronic device to write the data into the file by wireless connection. アプリケーション装置からのデータのカードへの書き込み命令を受け取ると、まずデータを該バッファに書き込んで暫時保存し、並びに該電子装置の保存設備中にファイルを構築及び開放し、これによりデータを無線連接により該ファイル中に書き込む。 - 特許庁
In the case that the buffer memory 14 for input overflows during storage through the first path 18 wherein the image data is compressed, the first path is switched to the second path 19 wherein the image data is not compressed, to input the image data from the reader 11 again. 画像データを圧縮処理する第1経路18で格納中に、入力用バッファメモリ14がオーバーフローしたとき、画像データを圧縮処理しない第2経路19に切り替えて、読み取り装置11からの画像データの入力をやり直させる。 - 特許庁
To provide "a buffer memory device and a data transfer system" capable of transferring data so as to be independent from the operation frequency of data writing side and reading side and contributing to the absorption of an operation speed difference between devices in a system and improvement of a transfer speed. データの書き込み側と読み出し側の動作周波数に依存しない形でデータ転送を可能にし、システム内のデバイス間の動作速度差の吸収、転送速度の向上に寄与することができる「バッファメモリ装置及びデータ転送システム」を提供すること。 - 特許庁
From DV data form the outside, voice data only are extracted by an AVI form voice data producing part 104, converted into an AVI form on the basis of the voice quantization bit number from the quantization bit number predicting part 105, and accommodated in a buffer memory 107. 外部からのDVデータをAVI形式音声データ生成部104により、DVデータから音声データのみを抽出、量子化ビット数予測部105からの音声量子化ビット数に基づき、AVI形式に変換しバッファメモリ107に格納する。 - 特許庁
In a packet control part in the base station controller for receiving data from a high order device, when transferring reception data accumulated in an internal buffer are transferred to the call processing part, the accumulated data are not continuously transmitted but divided into a prescribed size or smaller every transfer cycle and transmitted. 上位装置からのデータを受信する基地局制御装置内のパケット制御部において、内部バッファに蓄積した受信データを呼処理部に転送する際、蓄積データを連続的に送信せず、転送周期毎に一定サイズ以下に分割して送信する。 - 特許庁
The databuffer is provided with an error detection code storage area, and the storage location of data and the error detection code are made correspond to each other for every sector, and the data storage area and the error detection code storage area are dividedly arranged. 誤り検出符号の格納領域をデータバッファ内に設け、データの格納位置と誤り検出符号とを、セクタ単位ごとに一対一に対応付け、しかも、データ格納領域と、誤り検出符号の格納領域を分割して配置するようにする。 - 特許庁