「initial-value」を含む例文一覧(3245)

<前へ 1 2 .... 26 27 28 29 30 31 32 33 34 .... 64 65 次へ>
  • As the initial value, brightness obtained in adjustment of brightness of an optical information reading area surely performed before the tuning is adopted.
    この初期値として、チューニングよりも前に必ず行なわれる光学情報読取領域の明るさの調整で得られた明るさが採用される。 - 特許庁
  • At the initial time without dirt, a luminance value a1 at a certain pixel position in the state of picking up the image of the vehicle is stored for each pixel of an entire picture.
    汚れのない初期時に、車両を撮像した状態の或る画素位置における輝度値a__1を全画面の画素毎に記憶しておく。 - 特許庁
  • To provide a game machine that prevents a person from illegally obtaining a profit even if an initial value random number is illegally read.
    初期値乱数が不正に読み取られたとしても、不正行為者が不正に利益を獲得することを防止する遊技機を提供すること。 - 特許庁
  • To generate an initial value of a highly accurate control system model where control commands in the early stage of plant simulation do not change excessively.
    プラントシミュレーションの初期における制御指令が過度に変動しない精度の高い制御系モデルの初期値を生成することを目的とする。 - 特許庁
  • To provide an imaging apparatus capable of optionally setting an AWB (Auto White Balance) gain initial value when starting an AWB operation without increasing a circuit scale.
    回路規模を大きくすることなく、AWB動作開始時のAWBゲイン初期値を任意に設定できる撮像装置を提供すること。 - 特許庁
  • Two outputs having a deflection property and corresponding to an initial value on one-on-one level in double verification out of them verify uniqueness of the two values.
    それらのうち偏向性があり、二重の検証で初期値と一対一対応する二つの出力は二つの値の唯一性を立証する。 - 特許庁
  • The engine control device sets an initial value for an ignition timing retarding amount and estimates the temperature of the catalyst for checking that the estimated temperature is higher than a set temperature or not (S3).
    点火時期リタード量のイニシャル値をセットして触媒の温度を推定し、推定温度が設定温度より上か否かを調べる(S3)。 - 特許庁
  • The intensity of the initial output laser light is measured with a laser power monitor 10, and is stored as a reference output value in a laser power memory circuit 22.
    初期の出力レーザ光の強さをレーザパワーモニタ10で測定して、レーザパワー記憶回路22に出力基準値として記憶しておく。 - 特許庁
  • To provide an initial value transfer circuit that prevents image disturbance at writing timing of external ROM data, such as mode switching.
    モード切替等の外部ROMデータを書込むタイミングにおいて画像に乱れが生じることのない初期値転送回路を提供すること。 - 特許庁
  • A memory circuit is provided for storing an optimum initial delay set value for a variable delay circuit in a DLL on every operating clock frequency.
    DLLにおける可変遅延回路について動作クロック周波数毎の最適な初期遅延量設定量を記憶する記憶回路を備える。 - 特許庁
  • To provide a 1/4 cycle delay clock generator normally operable even if a specific initial value is not set by obviating the need of a reset signal separately.
    リセット信号を別途に不要とし、特定の初期値がなくても正常に動作できる1/4周期遅延クロック発生器を提供する。 - 特許庁
  • Furthermore, the correction of the color value of the initial LUT is applied only to a grating point (vicinity grating point) within a prescribed distance (corrected distance D) from a color patch.
    また、あるカラーパッチから所定距離(補正距離D)内の格子点(近傍格子点)に対してのみ初期LUTの色値を補正する。 - 特許庁
  • The setting means sets the maximum frame number which can be received and an initial value of the response start time for starting to respond to received data.
    設定手段は、受信可能な最大フレーム数と受信データに対する応答を開始する応答開始時間の初期値とを設定する。 - 特許庁
  • Data given to the function 14 is written in a nonvolatile memory 15, read from a display microcomputer 19, and can be given as an initial value.
    DAC機能14に与えるデータは、不揮発性メモリ15に書込まれ、ディスプレイマイコン19から読出して初期値として与えることができる。 - 特許庁
  • To provide an image forming apparatus that facilitates input of the initial setting value of driver software such as a printer driver, and also suppresses erroneous input.
    プリンタドライバなどのドライバソフトの初期設定値の入力を容易にすると共に、誤入力を抑制できる画像形成装置を提供する。 - 特許庁
  • The controlling voltage Va is input into the variable condenser 8 via the fixed electrode 6, and the electrostatic capacitance of the variable condenser 8 is restored to the initial value.
    固定電極6を通して制御電圧Vaが可変コンデンサ8に入力され、可変コンデンサ8の静電容量が初期値に復帰する。 - 特許庁
  • A pseudo-random pattern generating circuit 3 receives data by using a latch signal and generates a reference PN pattern by using the data for an initial value.
    疑似ランダムパターン発生回路3は、ラッチ信号により受信データを取り込み、その値を初期値として基準のPNパターンを発生する。 - 特許庁
  • Shape data on a product, and initial condition data on the product including analysis conditions, design element information and required performance value information are inputted.
    製品の形状データと、解析条件、設計要素情報および要求性能値情報を含む製品の初期条件データを入力する。 - 特許庁
  • The counter is provided with each initial value register, the registers can reload to the counter when the counter receives a single command.
    カウンタは、各初期値レジスタを備えており、単一コマンドを受信したときにそれらのレジスタがカウンタにリロードすることができるように構成される。 - 特許庁
  • To provide an inverter surge resistant enameled wire superior in an initial value and V-t characteristics (voltage/dielectric breakdown service life characteristics) after extension.
    初期値及び伸長後のV−t特性(電圧−絶縁破壊寿命特性)が優れた耐インバータサージエナメル線を提供することにある。 - 特許庁
  • To enable an initial value to be set arbitrarily even if a memory capacity is increased and to prevent spike noise from being generated by reducing the current consumption at initialization.
    メモリが大容量になっても、初期値が任意に設定可能で、初期化時の消費電流が小さく、スパイクノイズが発生しないようにする。 - 特許庁
  • A seeds profile gallery is prepared and an initial parameter value concerned with the profile is selected by using manufacturing process information of a semiconductor device.
    シード・プロフィールのギャラリが作られ、半導体装置についての製造プロセス情報を用いて該プロフィールに関連する初期パラメータ値が選択される。 - 特許庁
  • A first comparator 36 compares a threshold potential lower than an initial value potential by 50mV before engine start with an output potential from an amplifier 14.
    第1コンパレータ36は、エンジン始動前の初期値電位よりも50mV低い閾値電位と増幅器14からの出力電位とを比較する。 - 特許庁
  • The sintered parts are decarburized to form a decarburized surface layer portion 18 in which the carbon concentration is lower than the initial value only for the surface layer portion.
    その焼結部品が脱炭処理され、表層部のみ初期炭素濃度より低い炭素濃度の脱炭表層部18が形成される。 - 特許庁
  • Moreover, complex musical sound waveform signals can be obtained by time varying the initial value or selectively conducting the resets for every period.
    その他、前記初期値を時変動させたり、前記周期毎のリセットを選択的に行うことにより複雑な楽音波形信号が得られる。 - 特許庁
  • The inputted gradation image is arithmetically encoded by using the set index for an initial value and the gradation image is compression-encoded.
    そして、設定されたインデックスを初期値として、入力されたグラデーション画像が算術符号化され、グラデーション画像の圧縮符号化が行われる。 - 特許庁
  • For a certain time after the start of an engine, an execution timer for the brake negative pressure securing control is held to an initial set value (for example, 20 sec), followed by down-counting.
    エンジン始動後の所定時間、Br.負圧確保制御の実行タイマを初期設定値(例えば20秒)にホールドし、その後、ダウンカウントする。 - 特許庁
  • The composite image fa(x, y) is generated according to an expression fa(x, y)=(1-B)×fa(x, y)+B×ft+k(x, y) (S60), wherein B is a blend rate, (k) is the number of combination operations and an initial value of fa(x, y) is the frame image ft(x, y).
    この合成画像fa(x、y)は、式fa(x,y)=(1−B)・fa(x,y)+B・ft+k(x,y)により生成する(S60)。 - 特許庁
  • In 101a, the blanking is applied, and a deflector serving as the main deflector is set to an optimum value of second time exposure and the follower deflector is set to an initial position.
    101aではブランキングをかけ、主偏向器である偏向器2回目の露光の最適値に設定し追従偏向器は初期位置に設定する。 - 特許庁
  • Further, when the luminance around the mobile terminal is changed during the extinction, the illumination luminance of the lighting elements 118a, 118b is restored to an initial value.
    又、減光中に装置周囲の輝度に変化があると照明素子118a及び118b夫々の照明輝度を初期値に戻す。 - 特許庁
  • A gate of the MOS transistor Tp3 is connected to a grounded, and a gate of the MOS transistor Tp4 is connected to an initial value setting circuit 34.
    そして、MOSトランジスタTp3のゲートをグランドに接続し、MOSトランジスタTp4のゲートを初期値設定回路34に接続した。 - 特許庁
  • (b) shows the degree of contamination with the lapse of time of the charger, (a) shows chargeability, wherein Dx shows an initial value and Dy shows the characteristic of the deterioration with the lapse of time.
    (b)は帯電器の経時汚染の度合いを示し、(a)は帯電能力でDxは初期値、Dyは経時劣化の特性を示す。 - 特許庁
  • A set value XS1 or XS3 of a terminal thickness corresponding to an initial temperature TPI1 or TPI3 is operated in an operation part 54.
    演算部54において、初期電極温度TPI1乃至TPI3に応じた端子厚さ設定値XS1乃至XS3が演算される。 - 特許庁
  • The tracking part 32 tracks an optical image included in the initial area as a tracking object when the exposure value is larger than a predetermined threshold.
    露出量が所定の閾値より大きいときに追尾部32は初期領域に含まれる光学像を追尾対象体として追尾する。 - 特許庁
  • This structure makes it possible to use the maximum output value of the battery having higher power level at the initial discharge than when discharged continuously.
    これにより、連続放電したときの電力値より放電初期の高いバッテリ出力可能な最大値を利用することが可能となる。 - 特許庁
  • When the data can not be read, data in the buffer are turned into initial value and written on the recording medium after correcting the target FAT sector on the buffer.
    読み出しが不可能なら、バッファのデータを初期値にして、バッファ上で目的とするFATセクタを修正し、記録媒体に書き込む。 - 特許庁
  • To obtain an LSI for control that can automatically write an initial value to a universal LSI when power is turned on even without going through CPUs.
    CPUを介さずとも、電源が投入されると汎用LSIに初期値を自動的に書きこむことができる制御用LSIを得る。 - 特許庁
  • When changing over, the controller adopts a coordinate connection method so as to set an initial value of the Z head ZsR' (or ZsL') to be newly used.
    制御装置は、切り換えの際、座標つなぎ法を適用して、新たに使用するZヘッドZsR’(あるいはZsL’)の初期値を設定する。 - 特許庁
  • The maximum value of the modulated anode duty ratio is changed to become larger than that of the anode duty ratio in the initial period of the discharge lamp.
    変調される陽極デューティ比の最高値が放電灯の初期の陽極デューティ比の最高値よりも高くなるように変更される。 - 特許庁
  • In a loop in the areas h_i, the processing part executes random walk retrieval up to the count value c_0 by the areas h_i according to the initial values (symbol 10).
    領域内部のループでは、処理部は、初期値に従い、領域h_iごとに、カウント値c_0までランダムウォーク探索を行う(符号10)。 - 特許庁
  • Plural random numbers are generated according to a control signal SET and a clock signal, and an initial value is generated based on these random numbers.
    制御信号SET及びクロック信号に応じて複数の乱数を発生して、これら複数の乱数に基づいて初期値が生成される。 - 特許庁
  • In the plated powder 1, the initial volume resistivity value measured under the condition of 20°C/65%RH is 0.01 to 10 mΩ cm.
    めっき粉体1は、20℃/65%RHの条件下で測定された初期の体積固有抵抗値が0.01〜10mΩ・cmである。 - 特許庁
  • Upon completion of the initialization of the IACV, the ignition timing correction amount is then restored to the initial value by increasing the amount of advance by a predetermined amount in a stepwise manner.
    IACVの初期化が終了すると、その後は段階的に所定量ずつ進角量を増やして、初期値まで復帰させる。 - 特許庁
  • the time required for something to fall to half its initial value (in particular, the time for half the atoms in a radioactive substance to disintegrate)
    物質の最初の価値が半分に下がるまでに必要とされる時間(特に、放射性物質の原子の半分が崩壊するまでの時間) - 日本語WordNet
  • To accurately set initial tension of a belt of a belt driving device to a specified suitable value while eliminating the necessity to use a large spring.
    大きなバネを用いる必要を無くしつつ、ベルト駆動装置のベルトの初期張力を所定の適正な値に正確に設定できるようにする。 - 特許庁
  • On the basis of the weight of the first evaluation value of a motion vector preserved in a vector memory 3 and a second evaluation value relating to a pixel of interest determined by using a shift initial vector, a covered area is decided and also one evaluation value is selected.
    ベクトルメモリ3に保存された動きベクトルの第1評価値と、シフト初期ベクトルを用いて求めた注目画素に係る第2評価値との大小に基づいてカバード領域の判定を行うと共に一方の評価値を選択する。 - 特許庁
  • As a result, even when the first RAM is not effectively backed up and the contents are destroyed, the updated initial value of the random number counter can be avoided from being prone to the specific fixed value ('0', for example), and randomness for the random number value can be held.
    その結果、第1RAMのバックアップが有効になされず、その内容が破壊された場合でも、乱数カウンタの更新の初期値が特定の固定値(例えば、「0」)に偏ることを回避することができ、乱数値のランダム性を保持することができる。 - 特許庁
  • The turbo controller 14 makes the fully closed position corresponding to the initial voltage value a reference original position when the voltage value of the opening detection signal obtained at the first time upon restarting the operation is included within the voltage value range indicated by the fully closed opening signal.
    ターボコントローラ14は、運転再開時の初回に取得した開度検出信号の電圧値が、全閉開度信号が示す電圧値範囲に含まれているときに、この初回の電圧値に対応する全閉位置を基準原点とする。 - 特許庁
  • The output voltage Vo is increased from the initial output voltage value Vi to the predetermined constant output voltage value Vc during the transitional period Tt after the arc start, and the output voltage is controlled to the constant output voltage value Vc thereafter.
    本発明は、前記出力電圧Voを、アークスタート後の移行期間Tt中は、初期出力電圧値Viから予め定めた定常出力電圧値Vcまで上昇させ、その後は前記定常出力電圧値Vcに制御する。 - 特許庁
  • The multiplication factor of the multiplication circuit 1 is a divided value obtained by dividing the maximum operating frequency of the signal processing circuit 6 by the maximum allowable frequency of the external clock signal represented by the initial response value or less, and equal to or substantially equal to the divided value.
    てい倍回路1のてい倍率は、初期応答値が示す外部クロック信号の最大許容周波数で、信号処理回路6の最大動作周波数を除算した除算値以下であって、当該除算値と同一または略同一である。 - 特許庁
<前へ 1 2 .... 26 27 28 29 30 31 32 33 34 .... 64 65 次へ>

例文データの著作権について