「Hardneſſ」の共起表現一覧(1語右で並び替え)
該当件数 : 337件
Two factors contribute to ReB2's high | hardness: a high density of valence electrons, and an |
ade from plain carbon steel SAE 1070 and have | hardness about 45 HRC. |
ne-tuning of some parameters (i.e., radiation | hardness, afterglow, transparency) can be achieved by |
On | Hardness and Liquidity |
or moderately hard, 170 to 300 mg/l carbonate | hardness, and organically pure. |
Prefiltration pH adjustment: If the pH, | hardness and the alkalinity in the feedwater result in |
nate are those that are looking to add muscle | hardness and density to their physiques, nearly always |
ntify opaque minerals using micro-indentation | hardness and optical reflectance. |
own a weak inverse relationship between water | hardness and cardiovascular disease in men, up to a le |
ellent heat conductor, with high strength and | hardness, and a very high melting point. |
kens the rods because the hydrides have lower | hardness and ductility than metal. |
Both | hardness and ductility reach their highest points arou |
e in the manganese content will increase both | hardness and ductility. |
In particular, diamond has the highest | hardness and thermal conductivity of any bulk material |
nd peaceful, it does not thrive in high water | hardness and needs to be kept in groups. |
Drostanolone propionate can increase muscle | hardness and density, giving an individual a more comp |
rface integrity refers to surface smoothness, | hardness, and lack of defects, such as flats, pits, so |
use in applications where improvements in the | hardness and toughness of polymer films are desired. |
matter, impenetrability is disassociated from | hardness and then put in an arbitrary relationship to |
quantity of the binder used affects both the | hardness and the abrasive properties of the working wh |
The grit (size), | hardness and concentration of the diamonds in the diam |
Different materials with similar properties ( | hardness and ductility) will respond alike and thus re |
sented an ideal Tlingit conception of warmth, | hardness, and dryness. |
Most coatings generally increase a tool's | hardness and/or lubricity. |
t was renowned for supernatural sharpness and | hardness, as well as for being imbued with the spirits |
mple II Timothy 2:3 (KJV): "Thou shalt endure | hardness, as a good soldier of Jesus Christ." |
workpieces at a similar temperature, rate and | hardness, as compared to hexavalent chromium. |
Z.Soghomonium,, P. Beckley, A. Moses, On-line | hardness assessment of CRML steels, American Society o |
s one of the hardest substances known, with a | hardness below that of diamond and comparable with tho |
Osumilite has a | hardness between 5-6 on the Mohs hardness scale. |
The | hardness can also be increased. |
e cut is soft, the diamonds' size can be big, | hardness can be medium, and concentration should be a |
l harder, but if the grains get too small the | hardness can actually decrease. |
st erosive factors, and is primarily based on | hardness, chemical reactivity and cohesion. |
For example, OsB2 is hard ( | hardness comparable to that of sapphire), but not supe |
The intensity of abrasion depends on the | hardness, concentration, velocity and mass of the movi |
which, along with corundum's reasonably high | hardness, contributes to corundum's status as a common |
es such as cost, weight, strength, toughness, | hardness, corrosion and fatigue resistance, and perfor |
pe): ingredient functionality will enable the | hardness, crunchiness and breakdown properties to be v |
This | hardness decrease is accompanied by the decrease in ma |
Grain per gallon (gpg) is a unit of water | hardness defined as 1 grain (64.8 milligrams) of calci |
The water has 6,7 PH and 0,5 | hardness degree. |
egree of crystallinity has a big influence on | hardness, density, transparency and diffusion. |
ttributes that Tlingits value in a person are | hardness, dryness, and heat. |
their presence is partly responsible for the | hardness due to quenching of steel. |
Due to its | hardness, durability and chemical inertness, zircon pe |
e tool steels were developed for strength and | hardness during prolonged exposure to elevated tempera |
ndicates softness above n, d, t, c and z, and | hardness for l. |
The Mohs | hardness for bonaccordite is 7 and its density is 5.17 |
y offers a variety of grades of thickness and | hardness for the product. |
alley that is the Vale of White Horse and its | hardness forced the River Thames to take a wide northe |
ndscape because it stands out by its superior | hardness from the soft shales above and below. |
ewelry wire will make the wire with a defined | hardness, generally labeled as a hardness of 0, 1, 2, |
Dozens of geological layers of differing | hardness had to be tunnelled through, lime layers need |
Uvite's | hardness has been measured to be 7.5 on the mohs hardn |
Confused with the high | hardness, he decided to continue his examinations. |
Sexual | hardness in Ibiza |
an example of an isotropic crystal with equal | hardness in all directions. |
It is one of several definitions of | hardness in materials science. |
Example of a projected area from a | hardness indentation. |
nerate ion exchange resins used to remove the | hardness ions calcium and magnesium from water. |
post-treatment water such as concentration of | hardness ions or the distribution, structure, and morp |
Scratch | hardness is the measure of how resistant a sample is t |
The mineral is very brittle; its | hardness is 2.5 to 3, and its specific gravity 4.422 t |
white, gray, greenish, or brown in color; its | hardness is 5-6 on the Mohs scale, and its specific gr |
Its | hardness is that of soft wax. |
A pH of 7.3 and 10 degrees of | hardness is suitable, but not the much harder water th |
Its specific gravity is 8.9 and its | hardness is 2.5-3. |
The | hardness is 3, and the specific gravity is 4.3. |
The | hardness is 4.5 and the specific gravity is 4.36. |
Hardness is 5.5 and the specific gravity is 6.5. | |
Hardness is 1.5 to 2. Related are chlorargyrite and io | |
Its Mohs | hardness is 6.5, unusually high for a platy mineral, a |
The | hardness is 3 and the specific gravity 6.3. |
erfect rhombohedral cleavages is 73° 48', the | hardness is 3.5 to 4, and the specific gravity is 2.9 |
The Mohs | hardness is 3 to 3.5 and the specific gravity is 4.5 t |
t can be readily scratched with the nail, its | hardness is placed at about 2. The specific gravity va |
and in this sense | hardness is a measure for resistance to deformation or |
Its Mohs | hardness is 5 to 6 and its specific gravity is 2.16. |
The | hardness is 3.5 to 4, and the specific gravity 6.5 - 7 |
problems in industrial settings, where water | hardness is monitored to avoid costly breakdowns in bo |
Its Mohs | hardness is 3.5 to 4 and the specific gravity is 5.04. |
Its Mohs | hardness is 5.0-6.0, and its specific gravity is 3.0-3 |
The specific gravity is about 2.67 and the | hardness is 3.5. |
Its | hardness is between 6.5 and 7, and its specific gravit |
Its | hardness is 6-6.5 - Orthoclase-Pyrite and the luminesc |
Its Mohs | hardness is 5.5 to 6 and it has a specific gravity of |
nce on the sharpening surface must be harder ( | hardness is measured on the Mohs scale) than the mater |
embers in 1350-1351 it also included Clifton; | Hardness is first mentioned in 1553, though may have b |
Its specific gravity is 2 to 2.1 and its Mohs | hardness is 2. |
Its density is around 8 g/cm³ and its | hardness is 4 on the Mohs scale. |
The Mohs | hardness is high, being 7.5 - 8; the specific gravity |
Its Mohs | hardness is 2.5, with an average Specific Gravity of 2 |
Carbonate | hardness is removed from water through the process of |
The Mohs | hardness is 5.5 and the specific gravity is 2.8 - 3.0. |
The | hardness is 4 and the specific gravity is between 2.6 |
The Mohs | hardness is 1.5 to 2 and the specific gravity is 6.4. |
The Mohs | hardness is 2 and the specific gravity is 7.815. |
n persist in water for up to 32 days when the | hardness is 50ppm or more. |
Its Mohs scale | hardness is between 3 and 4. It occurs as an alteratio |
as cubic lattice, density 7.08 g/cm³ and Mohs | hardness is variously noted as 6.5 and 7.5. |
This difference in | hardness is the objective of the process; the appearan |
The Mohs scale of mineral | hardness is based on the ability of one natural sample |
erally fall between those of the members, but | hardness is greater than the individual constituents. |
The | hardness is comparable to many copper-beryllium and co |
cho (named after a type of wood known for its | hardness) is a left-wing group in Argentina that self- |
The | hardness is 1.5 on Mohs scale and is comparable to tha |
This expression implies that the chemical | hardness is proportional to the band gap of a chemical |
Due to its | hardness it also is found in placers. |
The more | hardness, less reactivity and more cohesion a mineral |
hot or grit is usually available at different | hardness levels, ranging between 40 and 65 on the Rock |
feminine ideal, concluding that 'there is no | hardness like the hardness of a narrow mind polished i |
In these cases, the surfaces requiring the | hardness may be hardened selectively, leaving the bulk |
form an insoluble precipitate, removing these | hardness minerals from the water. |
n blue, it has a vitreous or pearly lustre; a | hardness of 5-6 and an uneven conchoidal fracture. |
lade are determined by the type of metal, the | hardness of the blade, and the grinding pattern (e.g. |
It forms soft (Mohs | hardness of 2) yellow to reddish-yellow, earthy, scale |
They prefer water with a pH of 5-7, a water | hardness of up to 15 dGH, and an ideal temperature ran |
The | hardness of the crystals is 3.4, but the earthy and po |
It has a Mohs | hardness of 4-5. |
lly to different ligands due to the different | hardness of the cations. |
climate in water with a 6.0 - 8.0 pH, a water | hardness of 2 - 25 dGH, and a temperature of 79 °F (26 |
A | hardness of 4 meant that the wire was drawn five or mo |
A | hardness of 0 meant that the wire was drawn only one t |
It has a Mohs | hardness of about 5. |
e Brinell scale characterizes the indentation | hardness of materials through the scale of penetration |
Reinerite has a relative | hardness of 5 to 5.5 on the Mohs Scale which is equiva |
nish of ultrasonic machining depends upon the | hardness of the workpiece/tool and the average diamete |
With a Mohs | hardness of above 9, it is one of the hardest material |
A streak plate (unglazed porcelain) has a | hardness of 7.0. |
It has a vitreous to pearly luster, a Mohs | hardness of 3 to 3.5 and a specific gravity of 3.00 to |
wn acicular orthorhombic crystals with a Mohs | hardness of 2 to 2.5 and a specific gravity of 6.1 to |
It is usually heat treated to reach | hardness of 58-61 |
The Mohs | hardness of HgTe is 1.9, CdTe is 2.9 and Hg0.5Cd0.5Te |
monoclinic tectosilicate crystals with a Mohs | hardness of 3.5 to 4 and a specific gravity of 2.1 to |
Its specific gravity is 3.2 and it has a Mohs | hardness of 4.5 to 5. It is usually translucent and no |
It has a Mohs | hardness of six, a Vickers hardness of 7.7 GPa at a lo |
s light blue to bright green in colour, has a | hardness of 2.5, a vitreous luster, a white streak and |
tem, it is apple-green in colour, with a Mohs | hardness of 3-4, and a vitreous lustre. |
It is clay-like with Mohs | hardness of 2.5 and a specific gravity of 5.5. |
lack to lead grey metallic colour with a Mohs | hardness of 2 to 3 and a specific gravity of 5.4. |
It has a Mohs | hardness of 3.5 to 4 and a specific gravity is 4.34. |
cite has an orthorhombic crystal structure, a | hardness of 5, specific gravity of 4, a submetallic lu |
It has a Mohs | hardness of 7 and a specific gravity of 3.3 to 3.34. |
It is a soft mineral with a Mohs | hardness of 2-3. |
Diamond cutting, because of the extreme | hardness of diamonds, cannot be done with silicon carb |
It has a Mohs | hardness of 7 to 7.5 and a specific gravity of 3.0. |
of 8.7, a density 8,719 kg/m3, and a Brinell | hardness of 65 to 74. |
The proverbial | hardness of Noric steel is expressed by Ovid: "...duri |
e)Al12O19) is a brownish black mineral with a | hardness of 7.5-8.0 |
perceived in many different ways, such as the | hardness of strong bones or the hardness of a firm wil |
It has a Mohs | hardness of 1.5 to 2 and a specific gravity of 3.46. |
grey/black tetragonal crystals and has a Mohs | hardness of 6 - 6.5. |
le in hot phosphoric acid.. Changbaiite has a | hardness of 472.4 kg/mm2 on the Vickers hardness scale |
red to red orange tetragonal crystals with a | hardness of 7.5. |
nonyms throughout the region, the "iron-like" | hardness of the vine's wood gave rise to its primary n |
It has a Mohs | hardness of 4 and a specific gravity of 2.36. |
It has an uneven fracture and has a | hardness of 2-3 (gypsum-calcite). |
l climate and prefer water at pH 6-7, a water | hardness of up to 15.0 dGH, and an ideal temperature r |
It has a Mohs | hardness of 2.5 and a specific gravity of 1.99. |
s a process used to control the ductility and | hardness of a material. |
climate in water with a 6.0 - 8.0 pH, a water | hardness of 2 - 25 dGH, and a temperature range of 72 |
It is very soft Mohs | hardness of 1 with a specific gravity of 1.66-1.7. |
oped a methodology that greatly increased the | hardness of his steels. |
It has a Mohs | hardness of 2.5 to 3 and a specific gravity of 5.6. |
It has a specific gravity of 6.45 and a Mohs | hardness of 5.5. |
climate in water with a 6.0 - 6.5 pH, a water | hardness of 8 - 15 dGH, and a temperature range of 68- |
It is metallic and opaque with a | hardness of 5 and a specific gravity of 7.83. |
climate in water with a 6.0 - 6.5 pH, a water | hardness of 10 dGH, and a temperature range of 75 - 86 |
It has a Mohs | hardness of 5.5 and a specific gravity of 7.1. |
climate in water with a 6.0 - 8.0 pH, a water | hardness of 2 - 25 dGH, and a temperature range of 70 |
climate in water with a 6.0 - 8.0 pH, a water | hardness of 2 - 25 dGH, and a temperature range of 70 |
ica, talc, brucite, and gypsum by its greater | hardness of 6.5 - 7. The specific gravity is 3.4. |
teel grey to black metallic mineral with Mohs | hardness of 3.5 to 4 and specific gravity of 4.6 to 5. |
ss to pale yellow orthorhombic mineral with a | hardness of 6-7. |
climate in water with a 6.0 - 8.0 pH, a water | hardness of 2 - 25 dGH, and a temperature range of 68 |
as a high specific gravity of 7.15 and a Mohs | hardness of 4.5. |
climate in water with a 6.0 - 8.0 pH, a water | hardness of 2 - 25 dGH, and a temperature range of 73 |
mineral with orthorhombic crystal habit and a | hardness of 5. |
black metallic isometric crystals with a Mohs | hardness of 5.5 to 6. |
It has a Mohs | hardness of 4.5 and a specific gravity of 7.4 to 7.5. |
It has a Mohs | hardness of 7 to 7.5 and a specific gravity of 2.9. |
It has a specific gravity of 3.3 and a | hardness of 2.5. |
It has a Mohs | hardness of 3.5 to 4 and a specific gravity of 3.8. |
climate in water with a 6.0 - 7.2 pH, a water | hardness of 12 dGH, and a temperature range of 22 - 25 |
of times that the wire was drawn because the | hardness of the wire can be changed by heat treating t |
The | hardness of the fur enables the Gascon to tolerate col |
It has a Mohs | hardness of 3 to 4 and a specific gravity of 3.36. |
independent sets of line graphs, despite the | hardness of the maximum independent set problem for mo |
It has a Mohs | hardness of 5.5-6 and a specific gravity of 3.5 - 4.2. |
climate in water with a 6.0 - 8.0 pH, a water | hardness of 2 - 25 dGH, and a temperature range of 72 |
climate in water with a 6.0 - 8.0 pH, a water | hardness of 2 - 25 dGH, and a temperature range of 77 |
s specific gravity is 2.201 and it has a Mohs | hardness of 2.5. |
The | hardness of a material is measured against the scale b |
The Mohs | hardness of clintonite is 6.5 and the specific gravity |
It has a Mohs | hardness of 5.5 and a specific gravity of 5.9 to 6.33. |
climate in water with a 6.0 - 8.0 pH, a water | hardness of 2 - 25 dGH, and a temperature range of 72 |
, it is not the stiffness of the shank or the | hardness of the box that really gives the pointe shoe |
In the annealed state is has a | hardness of 27 HRC. |
ced were nobility of idea, precision and even | hardness of outline, scholastic composition, with the |
こんにちは ゲスト さん
ログイン |
Weblio会員(無料)になると 検索履歴を保存できる! 語彙力診断の実施回数増加! |
こんにちは ゲスト さん
ログイン |
Weblio会員(無料)になると 検索履歴を保存できる! 語彙力診断の実施回数増加! |