「Absorb」を含む例文一覧(3801)

<前へ 1 2 .... 18 19 20 21 22 23 24 25 26 .... 76 77 次へ>
  • Lithographic printing emulsion inks are obtained by dispersing fine particles of a water absorptive polymer which has been allowed to absorb water and fine particles of a polyhydric alcohol into an oil based ink.
    油性インキ中に、水を吸収させた吸水性ポリマーの微粒子と多価アルコールの微粒子を分散させてなる平版印刷用エマルジョンインキ。 - 特許庁
  • This mycelium bottle is obtained by laying sand, etc., on the bottom of the interior of the mycelium bottle in order to prevent formation of pupa chamber on the bottom of the bottle and absorb water drops on the bottle.
    菌糸ビン内部の底に砂等を敷きつめることで、底に蛹室を作りづらくさせ、底の水滴を吸収する働きを持つ菌糸ビン。 - 特許庁
  • To provide a joint structure of a shaft and a universal-joint yoke that can ensure necessary bending angle at the time of collision and stably absorb shock.
    衝突時に所要の屈曲角を確保でき、安定した衝撃吸収が可能である、シャフトと自在継手のヨークの結合構造を提供する。 - 特許庁
  • The vacuum cleaner can absorb a shock when the suction nozzle 16 touches furniture, a wall or the like by virtue of compressive deformation of the spring coil 28.
    この電気掃除機は、スプリングコイル28の圧縮変形により、吸込口体16が家具や壁等と接触したときの衝撃を吸収することができる。 - 特許庁
  • A flow velocity of the coolant flowing the lower surface of the upper plate and the heat radiating fins 26 is fast to be able to absorb the heat from the semiconductor element with high heat transfer coefficient.
    上板下面及び放熱フィン26において、冷却水の流れは速く、高い熱伝達率で半導体素子からの熱を吸収することができる。 - 特許庁
  • To provide an aseismic control structure having high rigidity with a small width dimension and enabling an aseismic control material to efficiently absorb vibration energy.
    小さい幅寸法で高い剛性をもたせることができて、制震材に効率良く震動エネルギーを吸収させることができる制震構造を提供する。 - 特許庁
  • The pressure fitting 10 is elastically deformed at a portion excepting both ends thereof, so that even if dimensional error happens on a core member, it can absorb the size in a height direction.
    押え金具10は両端部を除いた部位で弾性変形するので、コア部材に寸法誤差が発生しても高さ方向寸法を吸収できる。 - 特許庁
  • To facilitate tuning so as to absorb shock by being broken at a box section part forming an air conditioning duct when inputting a shock load.
    衝撃荷重の入力時に、空調ダクトを形成する箱断面部分が破壊されて衝撃吸収を行うようにするチューニングを容易にすること。 - 特許庁
  • To absorb and collect evaporative gas of fuel stuck on an intake system by a canister, and prevent dust in the atmosphere from being taken into the canister.
    吸気系に付着した燃料の蒸発ガスをキャニスタで吸着捕獲するとともに、このキャニスタに大気中の塵埃が吸入されることを防止する。 - 特許庁
  • To provide a superconducting device which can absorb stress caused by thermal contraction difference at a connection part between members at very low temperature.
    極低温下におかれる部材間の接続部における、熱収縮差に起因する応力を吸収することが可能な超電導機器を提供する。 - 特許庁
  • To provide an energy storage element which is easy in the attachment of a bus bar, and can absorb an external force even if the excessive external force acts on the element.
    バスバーを取り付け易くするとともに、過度の外力が作用しても、この外力を吸収することができる電極端子を提供する。 - 特許庁
  • To provide a structure for mounting an attachment for a vehicle which can absorb the marginal difference of a front spoiler and reducing dimension control man-hour of the front spoiler.
    フロントスポイラの公差を吸収することができ、フロントスポイラの寸法管理工数の削減が可能な車両用装着品の取付構造を提供する。 - 特許庁
  • To absorb external force such as water hammer, return the open/close state of a shutter, simplify a structure, save space, reduce cost, and save energy.
    水撃等の外力を吸収できるとともにシャッターの開閉状態を復帰でき、更に、構造の簡素化、省スペース化、コスト削減、省エネルギー化を図る。 - 特許庁
  • To provide a stopper with a damper which can efficiently absorb kinetic energy of a moving object and which is excellent not only in shock-absorbing performance but also in durability.
    移動物体の運動エネルギーを効率良く吸収することができて緩衝性に勝れると共に耐久性にも勝れるダンパ付きストッパを提供する。 - 特許庁
  • To provide a polymer composition which can reversibly absorb-transmit near infra-red rays and has a chromatic near infra-red ray-absorbing characteristic, and to provide a molded article.
    近赤外線を可逆的に吸収−透過するクロミックな近赤外線吸収特性を有する重合体組成物及び成形体を提供する。 - 特許庁
  • To provide a bending operation apparatus for endoscope which can effectively absorb the slack of wires without being affected by restrictions in the design of the operating section.
    操作部の設計上の制約の影響を受けることなく、有効にワイヤの弛みを吸収可能な内視鏡の湾曲操作装置を提供すること。 - 特許庁
  • To provide a vibration-isolating mount device which can absorb initial push-up load resulting from impact and can promptly attenuate vibration remaining after the impact.
    衝撃に基づく初期突き上げ荷重を吸収できるとともに衝撃後の残留振動を早期に減衰できる防振マウント装置を提供する。 - 特許庁
  • Each joining pad is provided with a slit which is communicated with the connection opening and has a width of 1/4 of the wavelength of an electromagnetic wave or below to absorb the excess or deficiency of the amount of the joining material.
    接合パッドには接続開口に連通した、幅が電磁波の波長の1/4以下のスリットを設けて接合材量の過不足を吸収する。 - 特許庁
  • The organic foreign matter α is photooxidized by the action to absorb the light by the photocatalyst and consequently, the organic foreign matter α is decomposed and removed, thus completing the removal of the foreign matter α.
    光触媒が光を吸収することで、有機異物αを光酸化し、有機異物αが分解・除去され、異物除去を完了する。 - 特許庁
  • To provide a semiconductor device that can increase decoupling capacity, efficiently absorb noise from a power supply, and realize a stable operation of a circuit.
    デカップリング容量の増大が可能で、有効に電源ノイズの吸収をはかり、回路の安定動作を実現することのできる半導体装置を提供する。 - 特許庁
  • To absorb a backlash amount by a backlash absorbing part when a pair of gears mesh with each other and to reduce deformation and stress of the backlash absorbing part.
    一対の歯車の噛み合い時のバックラッシ量をバックラッシ吸収部で吸収すると共に、そのバックラッシ吸収部の変形と応力を低減する。 - 特許庁
  • At a connection part between a shift lever 2 and a sensor connection portion 54, a clearance is formed to absorb variations between components when a shift lever 2 is set in a neutral position.
    シフトレバー2とセンサ連結部54との連結部に隙間を形成して、シフトレバー2が中立位置をとるときの部品間のバラツキを吸収する。 - 特許庁
  • At least one of the electrodes of this discharge device is furnished with a shock absorbing mechanism to absorb or relieve the shock caused by discharging.
    電極の少なくとも一方が放電による衝撃を吸収または緩和するための緩衝機構を備えることを特徴とする放電装置。 - 特許庁
  • To provide an absorptive sheet which can absorb and retain efficiently a liquid such as urine and feces, and a disposable diaper using the absorptive sheet.
    尿や便などの液体を効率的に吸収及び保持することができる吸収シート、及び該吸収シートを用いた使い捨ておむつを提供する - 特許庁
  • In this case, the control voltage is determined based upon a resistance value of the heater or a measurement of electric power consumed by the heater to absorb variation thereof.
    この際の制御電圧は、ヒータの抵抗値またはヒータで消費される電力の測定に基づいて、その変動を吸収するように決定される。 - 特許庁
  • This fiber or fiber structure is obtained by adhering tea polyphenols which can absorb and control the ultraviolet rays of an invisible wavelength range existing in the sunlight to the fiber or the fiber structure.
    太陽光に含まれる不可視波長領域の紫外線を吸収抑制し得る茶ポリフェノールを固着した繊維又は繊維構造体。 - 特許庁
  • To make it possible to smoothly connect voices at an decoding side even when the thinning/drawling processing of a frame is required in order to absorb jitters.
    ジッタを吸収するためにフレームの間引き/間延び処理が必要な場合であっても復号化側で音を滑らかに繋ぐことができるようにすること。 - 特許庁
  • To provide a transmission for a vehicle having such a structure that can absorb/reduce an excessive back torque input from drive wheels therein in reverse idle gears.
    駆動輪から入力された過大なバックトルクをリバースアイドルギアにおいて吸収・低減できる構造を備えた車両用変速装置を提供する。 - 特許庁
  • To provide an open type disposable diaper having a pad closely fitted to the skin of a wearer and allowing the pad to surely absorb and retain excrement.
    パッドを着用者の肌に密着させることができ、パッドに排泄物を確実に吸収保持させることができるオープン型の使い捨ておむつを提供する。 - 特許庁
  • To perform a clean and smooth working by preventing problems with a drilling work by a wet core drilling, namely leakage and inability to absorb a cutting effluent.
    湿式コアードリルでの穿孔作業の問題点であった切削廃水の漏水及び吸水不能を防ぎ、美しくて速やかな作業を行う。 - 特許庁
  • The slider 41 stores therein an absorbing body 44 which abuts on the ink cartridge 70 to absorb ink leaking from a take-out port 76.
    スライダ41内には、インクカートリッジ70に当接して取出し口76から漏洩するインクを吸収する吸収体44が収容されている。 - 特許庁
  • To reliably absorb thermal displacement caused by rapid temperature rise of a fuel cell and prevent deformation of a stack as much as possible.
    燃料電池の急速昇温によって発生する熱変位を確実に吸収することができ、スタックの変形を可及的に阻止することを可能にする。 - 特許庁
  • By adjusting a distance between the frame pieces 45a, the inner weatherstrip 16 is expanded and contracted to absorb the manufacturing tolerance thereof.
    そして、前記各骨片45a間の距離を調整することでインナウェザストリップ16自体を伸縮させて、そのインナウェザストリップ16の製造公差を吸収させる。 - 特許庁
  • To provide an engine with two-stage supercharger, facilitating assembly and disassembly, which can absorb vibration and thermal expansion of an oil drain pipe and hold air-tightness.
    組立てや、分解が容易で、オイルドレン配管の振動や熱膨張を吸収でき、さらに気密性を保てる、2段過給機付エンジンを提供すること。 - 特許庁
  • To enable easy adaptation when there are differences in chip external size and thickness, and to absorb the variation in external shapes due to sealing resin by means of the depression part of a lid.
    チップ外形寸法や厚みが異なる場合に容易に対応でき、また封止樹脂による外形形状のばらつきを蓋の押圧部で吸収する。 - 特許庁
  • That is to say, the gaseous phase pipe 3 and the liquid phase pipe 4 function as springs, and they can absorb force acting on the evaporator 1 and the condenser 2.
    つまり、気相管3及び液相管4がバネの機能を果たし、蒸発器1及び凝縮器2に加わる力を吸収することができる。 - 特許庁
  • To effectively absorb impure gas in a slim gas discharge tube containing phosphor and discharge gas, and to make the manufacture of the gas discharge tube easy.
    細い管内に蛍光体、放電ガスを有したガス放電管内の不純物ガスを効率良く吸着するとともに、このガス放電管の作成を容易にする。 - 特許庁
  • The payment process part 12 uses savings type insurance associated with security type insurance to absorb a difference between the accepted premium and the provisional premium.
    払込処理部12は、受付保険料と予定保障保険料の差を吸収するために、保障型保険と関連付けられた貯蓄型保険を利用する。 - 特許庁
  • The flat insulating membrane 21 has a buffering layer to absorb the stress generated on hardening and prevent peeling of the substrate 1 and a protective wicker basket 10.
    平坦化絶縁膜21は、緩衝層となってシール11硬化時に生じるストレスを吸収し、基板1と保護筐体10との剥離を防止する。 - 特許庁
  • To effectively absorb the vibration of the frequency corresponding to the number of revolution of a rotary blade even in a helicopter where the number of revolution of the rotary blade is variable.
    回転翼の回転数が可変するヘリコプタであっても回転翼の回転数に対応した周波数の振動を効果的に吸収する。 - 特許庁
  • To provide an occupant protecting device for a vehicle allowing a mounting bracket to absorb in good performance an impact given when a driver etc. has collided with the mounting bracket.
    乗員が取付ブラケットに当たった場合、その衝撃を取付ブラケットで好適に吸収することができる車両用乗員保護装置を提供する。 - 特許庁
  • To provide constructs that absorb exudates and enhance browning and crisping of the food item during heating in a microwave oven.
    電子レンジ調理の際に食品の滲出物を吸収すると共に食品の焦げ目付け及びかりかりの焼き上げを高める構造体を提供する。 - 特許庁
  • Liquid absorption force of the oil-absorbing sheet is set so as to absorb the non-aqueous electrolyte liquid in the battery case 7 by adjusting the thickness.
    吸油性シートの液体吸収力は、厚さを調整することで、電池容器7内の非水電解液量を吸収するように設定されている。 - 特許庁
  • To provide a vibration isolation structure which has a very simple entire mechanism, can effectively absorb even large vibrations, and is implemented at a very low installation cost.
    全体のメカニズムを極めて簡単にし、しかも大きな振動をも有効に吸収できる構造としながら設備コストを著しく低減する。 - 特許庁
  • The pulse of the negative energy is shot into an artificial mini black hole by making a negative electrode or the like to consume and absorb a pulse of positive energy after the pulse of the negative energy.
    負のエネルギーのパルスの後の正のエネルギーのパルスを負の電極等で消費吸収させ負のエネルギーのパルスを人工ミニブラックホールに打ち込む。 - 特許庁
  • In a data readout device, a two-stage clock generation is implemented to generate a new clock from a system clock in order to absorb an error contained in the system clock itself.
    システムクロック自体に含まれる誤差を吸収するために、システムクロックから、新たなクロックを生成するために、2段階のクロックの生成を行う。 - 特許庁
  • The deformed portion 18 which is free of shearing deformation in static change is subjected to sufficient sheating deformation in dynamic vibration to absorb vibration energy.
    変形部18は静的な変動ではせん断変形していないので、動的な振動で十分にせん断変形し振動エネルギーを吸収する。 - 特許庁
  • The joining part 7 of the hysteretic damper 1 is joined to the structure, and when receiving force from the structure, the plate parts 3 are elastically plastically deformed to absorb the energy.
    履歴型ダンパ1の接合部7を構造体へ接合し、構造体から力を受けると、平板部3が弾塑性変形し、エネルギーを吸収する。 - 特許庁
  • The inner surface of a bottom wall 116 of the bobbin storage part is provided with an ink absorber 18 to absorb the ink leaking into the bobbin storage part.
    また、糸巻収納部の底壁116の内面に、糸巻収納部内へ漏れた墨汁を吸収可能な墨汁吸収体18が設けられている。 - 特許庁
  • Furthermore, the rear wall part 35 lowered in rigidity due to the breakage of the weak part 50 is easy to be deformed to smoothly absorb the collision energy against a secondary collision.
    さらに、弱部50の破断により剛性が低下した後壁部35は容易に変形し、二次衝突に対して円滑に衝撃エネルギーを吸収する。 - 特許庁
<前へ 1 2 .... 18 19 20 21 22 23 24 25 26 .... 76 77 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.