「Components」を含む例文一覧(50000)

<前へ 1 2 .... 315 316 317 318 319 320 321 322 323 .... 999 1000 次へ>
  • To make it possible to enhance an assembling workability, eliminate the deformation an damage of components, and also easily and securely prevent a mirror from falling.
    組み付け時の作業性がよく、部品の変形,破損などがなく、容易かつ確実にミラーの脱落を防ぐことができるようにする。 - 特許庁
  • The objective whole aromatic fiber nonwoven fabric is produced by making nonwoven fabric sheet from a combination of molten liquid crystal whole aromatic polyester fiber with a binder as the main components.
    溶融液晶全芳香族ポリエステル繊維及びバインダーを主成分として抄紙された全芳香族繊維不織布に関する。 - 特許庁
  • To provide a thin flexible disk drive that reduces number of components associated with mount of a stepping motor so as to effectively reduce the cost.
    ステッピングモータの取り付けに関連する部品点数を削減することでコストダウンに有効な薄型フレキシブルディスクドライブを提供する。 - 特許庁
  • To provide a resister reducing the number of components and setting a range of oscillation angle of a front movable louver large without degrading strength of fins.
    部品点数が少なく、フィンの強度を低下させずに、前可動ルーバの振り角範囲を大きく設定できるレジスタを提供する。 - 特許庁
  • An FFT (fast Fourier transform) part 401 breaks down each chip block for each N_c chip into N_c orthogonal frequency components by N_c-point FFT.
    FFT部401は、N_cチップごとの各チップブロックをN_c−ポイントFFTによりN_c個の直交周波数成分に分解する。 - 特許庁
  • A level difference comparing portion 14 compares amplitudes of the time frequency components X1(f, t) and GfX2(f, t) by time frequency component, and generates a mask pattern m1(f, t).
    レベル差比較部14は、時間周波数成分X1(f,t),GfX2(f,t)の振幅を各時間周波数成分ごとに比較し、マスクパターンm1(f,t)を生成する。 - 特許庁
  • The IDE includes components which are a source code editor, an influence analyzer, a test case launcher, a graphical user interface (GUI), and a data base.
    IDEは、ソース・コード・エディタ、影響アナライザ、テスト・ケース・ランチャ、グラフィカル・ユーザ・インターフェース(GUI)、およびデータベースというコンポーネントを有する。 - 特許庁
  • To independently detect a force in each axis direction and a moment, regarding each axis by eliminating the interference of the other axis components, using a simple structure.
    単純な構造で、他軸成分の干渉を排除し、各軸方向の力と各軸まわりのモーメントを独立して検出する。 - 特許庁
  • A computer analyzes words of a program to be converted, and creates another form program by combining components corresponding to analyzed words.
    コンピュータは、コンバート対象のプログラムを単語分解し、分解した単語に対応する部品を合わせて他の形態のプログラムを作成する。 - 特許庁
  • In the positional adjustment of the relay lens 433, the need for a conventional adjustment mechanism using a screw is eliminated, and the number of the components can be reduced.
    リレーレンズ433の位置調整において、従来のねじを用いた調整機構が必要なくなり、部品点数を低減できる。 - 特許庁
  • The liquid detergent composition for metal is characterized by formulating following components (A)-(E) in a respective ratio.
    下記(A)成分ないし(E)成分が、それぞれ次の割合で配合されてなることを特徴とする、金属用液体洗浄剤組成物。 - 特許庁
  • Then the interface converts the received address of the first width into one or more address components each of which has second width.
    次に、インタフェースは、受取ったアドレスを第1の幅から各々が第2の幅を有する1つまたは複数のアドレスコンポーネントに変換する。 - 特許庁
  • To enhance positioning accuracy at the time of fixing a plurality of multilayered lead frames supporting thin planar components at a constant interval.
    薄板状の部品を一定間隔で形成支持したリードフレームを複数枚積層して固定する場合の位置決め精度を向上させる。 - 特許庁
  • Even when the substrate 80 or electronic components on the substrate 80 are pressed via a potting member 100, the substrate 80 is not deflected.
    このため、ポッティング材100を介して基板80や基板80上の電子部品が加圧されても、基板80が撓むことはない。 - 特許庁
  • To reduce the number of components and the number of manufacture processes and thin a product by pattern-printing a coil where a current flows to a base.
    電流の流れるコイルをベースにパターン印刷して構成部品数及び製造工程数を減らせ、製品の薄型化を図る。 - 特許庁
  • In the respective seat components 12L and 12R (seat assemblies), lower frames 18 of seat cushions 12La and 12Ra include engagement protrusions 18a, respectively.
    各座席部品12L,12R(シートアッセンブリ)は、シートクッション12La,12Raの下部フレーム18に係合凸部18aを有する。 - 特許庁
  • The components (A) and (B) are kept apart from each other so as to avoid reaction between the two and undergo polymerization reaction only when they are mixed.
    成分(A)および(B)が反応しないように互いに分離されたまま維持され、混合された際に始めて重合反応する。 - 特許庁
  • To uses many circuit components of a signal processing circuit in common even in the case of an SDL mode whose compression rate is higher than that in an SD mode.
    SDモードに比して圧縮率の高いSDLモード時であっても信号処理回路の多くを共用できるようにする。 - 特許庁
  • To provide a camshaft enabling accurate positioning of a shaft and a cam lobe without increasing number of kinds of components.
    部品の種類数を増大させることなくシャフトとカムロブとの位置決めを高い精度で行うことが可能なカムシャフトを提供する。 - 特許庁
  • To provide a data driving circuit with fewer components, a display apparatus and a control method of the display apparatus.
    本発明は、構成部品を減らしたデータ駆動回路、表示装置及び表示装置のコントロール方法を提供することを課題とする。 - 特許庁
  • As the heater cover 7 receives and stores the dropping aluminum, the aluminum can be prevented from dropping to the electric components disposed at the lower part.
    ヒータカバー7は滴下したアルミを受けて貯留するため、下方に配置した電気部品などにアルミが滴下するのを防止できる。 - 特許庁
  • A frequency component calculation means 3 calculates the power of frequency components of the transmission signal amplified by the amplification means 2.
    周波数成分算出手段3は、増幅手段2によって増幅された送信信号の周波数成分の電力を算出する。 - 特許庁
  • Hence, a signal from a given servo sector contains components of each of the two different modulations, even in the case of "DC" deletion initiation.
    したがって、所与のサーボセクタからの信号は、「DC」消去開始の場合でさえも、異なる2つの変調それぞれの成分を含む。 - 特許庁
  • To provide a method and a structure for protecting confidential data stored in digital components in an unstabilized circuit from illegal access.
    不定状態になった回路のデジタル部品に記憶された機密データを不正なアクセスから保護する方法及び構成を提供する。 - 特許庁
  • To provide an electronic apparatus controller realizing servo control with the small number of components and to provide a control method of an electronic apparatus.
    少ない部品点数でのサーボ制御の実現を可能にする電子機器コントローラ及び電子機器の制御方法を提供すること。 - 特許庁
  • A suppression coefficient a corresponding to two parameters of an S/N and frequency components is stored in a suppression coefficient data table 13.
    S/N比や周波数成分の2つのパラメータに対応した抑圧係数αを抑圧係数データテーブル13に格納しておく。 - 特許庁
  • To provide a video display device which is not affected by the number of components when constituting a large screen without requiring another signal distributor.
    別の信号分配器を必要せず、大型画面を構成する際構成個数に影響を受けない映像ディスプレイ装置を提供する。 - 特許庁
  • The eccentricity of the center hole has direction components to be mutually opposite directions in a direction orthogonal to the array direction of the speaker units.
    中心孔の偏芯は、スピーカユニットの配列方向に直交する方向で相互に反対方向となる方向成分を有している。 - 特許庁
  • To easily rotate even image information, the configuration of which is managed for each component unit, for each divided component by arbitrarily dividing components.
    部品単位毎に構成管理されている画像情報であっても部品を任意に分割して分割部品毎に容易に回転する。 - 特許庁
  • The fixing members 121, 126 and device fixing members 601, 606 serving as components of metallic vehicle brackets are screwed and fixed.
    さらに、固定部材121,126と金属製の車両ブラケットの構成要素である装置固定部材601,606とをネジ止め固定する。 - 特許庁
  • To provide a unidirectional dynamic microphone that is easy to assemble and disassemble, and the number of components of which can be reduced to achieve cost reduction.
    、組立分解が簡単で、かつ、部品点数も少なくしてコスト低減を図ることができる単一指向性ダイナミックマイクロホンの提供。 - 特許庁
  • A registration part 13 registers features of frequency spectrum components of the respective speakers in a registration database 15 for comparison for identification.
    登録部13は、各話者の周波数スペクトル成分の特徴を個人識別のための比較用登録データ15として登録する。 - 特許庁
  • To provide a disk-chucking mechanism that can readily remove a disk and the number of components for removal is not drastically increased.
    ディスクチャッキング機構においてディスクを無理なく取り出せるようにし、かつそのために部品点数が大幅に増加しないようにする。 - 特許庁
  • A reverting component number determining section 11 determines the number of components reverting to respective quantization steps as to an input vector signal.
    帰属成分数決定部111は、入力されたベクトル信号について、各量子化ステップに帰属する成分の数を決定する。 - 特許庁
  • A moving picture Vd comprises frames F1-F12 whose images are configured with synthesis of color components in R(red), G(green) and B(blue) colors.
    動画Vdは、R(赤)、G(緑)、B(青)の色成分の合成により画像形成される複数のフレームF_1〜F_12で構成されている。 - 特許庁
  • To provide a method, a system capable of efficiently acquiring terminal information of a plurality of mobile terminals and components for the same.
    複数の移動端末の端末情報を効率的に取得することができる方法及びシステム並びにその構成要素を提供する。 - 特許庁
  • To provide a waterproof structure that has fewer components and a good operability of incorporation, and is free of risk of occurrence of a waterproofing defect.
    部品点数が削減され、しかも組み込みの作業性が良く防水不良が発生する恐れのない防水構造を提供する。 - 特許庁
  • To provide a vehicle seat in which pipe members can be directly and easily attached to an upper rail in order to reduce the number of components.
    部品点数を少なくするためにパイプ部材がアッパレールに直接かつ簡易に取付けられ得る乗物用シートを提供する。 - 特許庁
  • To provide nanodiamond having a small and uniform particle size and free from re-aggregation thereafter and suitable as a material for optical components.
    粒子径が小さく、かつ揃っており、その後の再凝集も無い光学部品用材料として好適なナノダイヤモンドを提供する。 - 特許庁
  • To prevent fire spreading to an electronic component casing for an outdoor unit and burnout of electronic components arranged within the electronic component casing for the outdoor unit.
    室外機用電装箱への延焼を防止し、室外機用電装箱の内部に配置された電装品の焼損を防止すること。 - 特許庁
  • To provide a camera device allowing the components thereof to be shared with even a camera device of a model different in a type of a driving unit for focus adjustment.
    フォーカス調整用の駆動ユニットのタイプが異なる機種であっても部品の共用化が可能なカメラ装置を提供する。 - 特許庁
  • To reduce cost by improving the support structure of a shelf plate supported by the framework structure of the rack, thereby reducing the number of components of the entire rack.
    ラックの枠組み構造体に支持される棚板の支持構造を改善して、ラック全体の部品の種類を削減し、コストダウンを図る。 - 特許庁
  • To provide a brake control device having efficient heat radiating structure without changing design so much or adding heat radiation promoting components.
    大幅な設計変更や放熱促進部品の追加を伴うことなく効率的な放熱構造を持つブレーキ制御装置を提供する。 - 特許庁
  • To provide an ultrasonic probe reducing influence of side lobes without reducing higher harmonic components in received ultrasonic waves.
    受信する超音波における高調波成分は減少させず、かつサイドローブの影響を低減できる超音波探触子を提供する。 - 特許庁
  • In a configuration information verifying apparatus 11, an alive monitoring information collecting section 21 acquires alive monitoring information of components from a network 31.
    構成情報検証装置11は、死活情報収集部21がネットワーク31から各構成要素の死活情報を取得する。 - 特許庁
  • To provide a battery pack equipped with a cover capable of covering a main part while restraining increase of the number of components and manufacturing processes.
    部品点数及び製造工程の増加を抑えつつ、主要部を被覆することができるカバーを備えた電池パックを提供する。 - 特許庁
  • To provide an engine which allows easy maintenance of harnesses and electric components even after mounted on a working machine.
    作業機に搭載された後であっても、ハーネスならびに電装部品のメンテナンスを容易に行うことができるエンジンを提案するものである。 - 特許庁
  • The casing includes at least two casing components 2, 3, 4 among them at least one cavity 18 is formed.
    前記ケーシングは、それぞれの間に少なくとも1個の空洞18が形成されている少なくとも2個のケーシング部品2、3、4から成る。 - 特許庁
  • To provide a cooling structure of a motor capable of reducing the number of components and simplifying a structure, and thereby facilitating an assembling operation while efficiently cooling a coil.
    コイルの冷却を効率よく行いつつ、部品点数が少なく、構造も簡素化して組立て作業も容易なものとする。 - 特許庁
  • Oscillation parameters are then measured to adjust the components of the filters to achieve an oscillation that corresponds to a desired filter characteristic.
    フィルタのコンポーネントを調整して、所望のフィルタ特性に対応する発振を達成するために発振パラメータが次に測定される。 - 特許庁
<前へ 1 2 .... 315 316 317 318 319 320 321 322 323 .... 999 1000 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.