「Drop-In」を含む例文一覧(7281)

<前へ 1 2 .... 23 24 25 26 27 28 29 30 31 .... 145 146 次へ>
  • To provide a liquid drop jet head which reduces variation in thickness of a vibration plate at a low cost and makes high quality printing possible.
    低コストで振動板の厚さバラツキを低減し、高品質印字が可能な液滴吐出ヘッドを提供する。 - 特許庁
  • At the time of error releasing processing, the shutter mechanism 111 closes the classification hole 76 in the open state to prevent drop of the coin.
    エラー解除処理時には、シャッタ機構111が開口状態の分類孔76を閉塞し、硬貨の落下を阻止する。 - 特許庁
  • To provide a fuel cell capable of suppressing a drop in power generation performance, and to provide a method of manufacturing the same.
    発電性能の低下をさらに抑えることができる燃料電池及びその製造方法を提供する。 - 特許庁
  • A group of weight pieces 12 differing in specific gravity is prepared and the weight of the drop end part 12 is adjusted by replacing weight pieces 12.
    比重の違う錘コマ12の群を用意し、錘コマ12の交換でモダン部10の重さを調節する。 - 特許庁
  • To provide a fuel cell system capable of preventing output drop caused by the blocking of an air taking-in port.
    空気取り入れ口の閉塞による出力低下を防止することができる燃料電池システムを提供する。 - 特許庁
  • To provide a recorder insusceptible to voltage drop in a circuit for driving a recording head and ensuring stabilized recording.
    記録ヘッドを駆動する回路における電圧降下等の影響を受けること無く、安定的に記録する。 - 特許庁
  • The suppression of the temperature drop of the nozzle can prevent the cracks of the nozzle due to thermal shock in early stage of the casting.
    ノズルの温度低下を抑制することにより、鋳造初期のサーマルショックによるノズルの割れが防止できる。 - 特許庁
  • To drop a circular game body such as a medal with no dispersion at an optional position in the width direction of the game board face of a game machine.
    ゲーム機の遊技盤面の幅方向の任意の位置に、円形の遊技体をバラツキなく落下させる。 - 特許庁
  • To provide a semiconductor device in which drop of an operation speed can be prevented, and to provide a manufacturing method of the device.
    動作速度の低下を防止することが可能な半導体装置及びその製造方法を提供する。 - 特許庁
  • In each case, a control means 18 controls a transistor Q1, to stop or drop output of an inverter circuit 16.
    いずれの場合にも制御手段18はトランジスタQ1を制御して、インバータ回路16の出力を停止ないし低下させる。 - 特許庁
  • To guide balls to a prescribed position and drop the balls while attracting them by a magnet in a game machine.
    遊技機において、球を、磁石体によって吸引しながら、所定位置まで誘導して落下させることである。 - 特許庁
  • Therefore, it is possible to prevent circuit misoperation resulting from an IR drop in the power supply of the internal core circuit.
    これにより、内部コア回路の電源のIRドロップに起因する回路の誤動作を防止することができる。 - 特許庁
  • To perform simple troubleshooting at the occurrence of a failure due to a drop of cell voltage in a fuel cell system.
    燃料電池システムで電池電圧低下による故障が発生した場合に、簡便なトラブルシュートを遂行する。 - 特許庁
  • To achieve an AC power relay with a simple configuration that is hardly affected by reduction in power supply voltages such as instantaneous voltage drop.
    瞬低などの電源電圧低下の影響を受けにくい交流パワーリレーを簡単な構成で実現する。 - 特許庁
  • It is therefore possible to transmit trigger signals in a short time, record and store monitoring information, and perform instantaneous voltage drop examination.
    よって、短時間にトリガー信号を伝送して監視情報を記録保存し瞬低調査をすることができる。 - 特許庁
  • To reduce black brightness drop caused by the reflection on the slope of the reflection electrode in the boundary with the transparent electrode.
    透明電極との境界領域の反射電極の斜面の反射による黒輝度の低下を低減する。 - 特許庁
  • The storage tray 9 and the drop cable holder 10 are installed on the back part of the case 3 in a rotatable manner.
    収納トレイ9及びドロップケーブルホルダ10は、筐体3の背面部に回動可能に取り付けられている。 - 特許庁
  • Logical state at the input section In of the communication means 13 is brought to low level by a voltage drop caused by that current.
    この電流による電圧降下で、通信手段13の入力部Inの論理状態はローレベルとなる。 - 特許庁
  • JIG AND METHOD FOR ADJUSTING POSITION OF OPTICAL MODULE OF INK DROP EJECTION STATE DETECTOR IN INK JET RECORDER
    インクジェット式記録装置におけるインク滴吐出状態検出器の光モジュール位置調整治具および方法 - 特許庁
  • As a result, the resolution of this photoelectric encoder can be enhanced, and a drop in the S/N ratio of the detection signal can be suppressed.
    その結果、分解能の向上を図ることができ、検出信号のS/N比の低下を抑制できる。 - 特許庁
  • To guide balls to a prescribed position and drop them while attracting them by magnetic bodies in a game machine.
    遊技機において、球を、磁石体によって吸引しながら、所定位置まで誘導して落下させることである。 - 特許庁
  • To substantially suppress a degree of temperature drop of a cell stack with fluid flowing in a passage for heat recovery.
    熱回収用の流路に流す流体によって電池スタックの温度が低下される程度を大幅に抑制する。 - 特許庁
  • Since the I/O side is cut off, voltage drop can be avoided, and power loss and heat in the circuit can be suppressed.
    入・出力側が遮断されるので、電圧降下もなく、回路内のパワーロスや発熱を抑えることができる。 - 特許庁
  • To provide a secondary battery capable of preventing drop in durability caused by damage by external shock.
    外部衝撃による損傷によって耐久性が低下するのを防止することができる二次電池を提供する。 - 特許庁
  • To provide a plasma display device capable of avoiding the drop of resolution in a vertical direction.
    この発明は、垂直方向の解像度の低下を回避できるプラズマディスプレイ装置を提供することを目的とする。 - 特許庁
  • To provide an agricultural covering film exhibiting excellent flow drop and being remarkably excellent in its sustainability.
    良好な流滴性を示すとともに、その持続性が際立って優れた農業用被覆フィルムを提供すること。 - 特許庁
  • To realize printing with a higher image quality by visually relaxing deterioration of an image due to shift in the shooting of an ink drop.
    インク滴の着弾ズレによる画像の劣化を視覚的に緩和し、より高画質の印刷を実現する。 - 特許庁
  • To provide a fireproof crescent lock capable of retaining a locked state without drop out of a crescent even in case of fire.
    火災時においても、クレセントが脱落せず施錠状態を維持し続ける耐火クレセント錠を提供する。 - 特許庁
  • The change-over switch 4 is short-circuited, when the ACDET circuit 6 detects a drop in the voltage value.
    切替スイッチ4は、ACDET回路6が電圧値の低下を検知したときに、短絡されるものである。 - 特許庁
  • To provide a liquid drop ejector capable of preventing a fall in adhesiveness of ink to a substrate caused by mist.
    ミストに起因するインクの基板に対する密着性の低下を防止できる、液滴吐出装置を提供する。 - 特許庁
  • To effectively perform a shift from a shortened variation mode to a normal variation mode without causing a drop in the operation.
    稼働低下を招くことなく、短縮変動モードから通常変動モードへの移行を効果的に演出する。 - 特許庁
  • To provide a plastic bottle capable of improving strength against drop impact even if reduced in weight.
    軽量化した場合であっても落下衝撃に対する強度を高めることが可能なプラスチックボトルを提供する。 - 特許庁
  • To make dispensable with a step for removing a false drop in retrieving text data to reduce the retrieval time.
    テキストデータの検索時にフォルスドロップを除去するステップを省くことができ検索時間を短縮できること。 - 特許庁
  • To provide a power window control device which can prevent voltage drop at the time of locking in an appropriate manner.
    より適切にロック時の電圧降下を抑制することができるパワーウィンドウ制御装置を提供すること。 - 特許庁
  • To provide a drop-lid for preventing the oxidation of a content liquid in a liquid discharge container such as a soy sauce bottle.
    醤油差しのような液体注出容器の、内容液の酸化を押えるための落とし蓋を提供する。 - 特許庁
  • First coin storage parts 8y are provided in a plurality of rows corresponding to the individual coin drop holes 16.
    個々の硬貨落下穴16に対応して第1の硬貨収納部8yが複数列をなして設けられている。 - 特許庁
  • The leak valve 81 starts leaking with a drop in the air pressure on the suction side of the electric blower 13 to protect the electric blower 13.
    電動送風機13の吸込側の気圧の低下にてリーク弁81がリークして電動送風機13を保護する。 - 特許庁
  • To provide molten delivery trough in which temperature drop of molten can be minimized when the molten passes through the molten delivery trough.
    出湯樋を通過する際の溶湯の温度降下をできるだけ少なくすることが可能な出湯樋を提供する。 - 特許庁
  • The eye drop for soft contact lenses in use, includes a menthol and a polyoxyethylene (20) sorbitan monooleate as the refrigerant.
    清涼化剤であるメントールとモノオレイン酸ポリオキシエチレン(20)ソルビタンを含有する、ソフトコンタクトレンズ装用時用点眼剤。 - 特許庁
  • The user puts an icon 50 of a required information file in the communication box 51 by a drag and drop operation.
    ユーザは、必要な情報ファイルのアイコン50をドラッグ&ドロップの操作によって、通信ボックス51に入れる。 - 特許庁
  • To provide a non-aqueous lithium secondary battery in which a voltage drop due to impurities is prevented.
    不純物の影響による電圧低下を防止し、信頼性に優れた非水系リチウム二次電池を提供する。 - 特許庁
  • To provide an electric motor which can inhibit a drop in cooling effect from being caused by mounting a waterproof cover.
    防水カバーの装着による冷却効果の低下を抑制することができる電動モータを提供する。 - 特許庁
  • To provide a multi output switching power supply which provides the small size and low cost, and suppresses a drop in efficiency.
    小型化と、低コスト化と、効率の低下の抑制と、を実現できる多出力スイッチング電源を提供すること。 - 特許庁
  • Next, a conduction via is formed by filling molten metal drop 32 in the via hole 21 to be solidified.
    次に、バイアホール21内に溶融金属滴32を充填し凝固させることにより、導通ビアを形成する。 - 特許庁
  • To provide a light emitting device that facilitates miniaturization and thickness reduction, and prevents a drop in the efficiency of light extraction.
    小型化、薄型化が容易な上、光取り出し効率の低下を防ぐことができる発光装置を提供する。 - 特許庁
  • To suppress drop in torque to a drive shaft and gear change shock, at the time of change-over of a speed stage of a transmission.
    変速機の変速段を切り替える際における駆動軸へのトルクの落ち込みや変速ショックを抑制する。 - 特許庁
  • To provide a fuel supply device in which filtering area of a suction filter is increased and pump efficiency does not easily drop.
    サクションフィルタの濾過面積を増大してポンプ効率が低下し難い燃料供給装置を提供する。 - 特許庁
  • To obtain a head for ink jet printer in which each piezoelectric plate part is positioned precisely with respect to each ink pressure chamber and an ink drop is flied accurately.
    各圧電板部がインク圧力室に精密に対応位置されてインク滴を高精度に飛翔させる。 - 特許庁
  • To provide a semiconductor device having a voltage drop circuit which is hardly influenced by the changes in the threshold voltage.
    しきい値電圧の変動の影響を受けにくい電圧降下回路を備えた半導体装置を提供する。 - 特許庁
  • CONTAINER WITH HOLE BORED IN THE LOWEST PORTION OF BOTTOM THEREOF SO AS TO ALLOW SOLUTION TO FLOW OUT OF CONTAINER BY GRAVITY-DROP
    容器の底の一番低い所に穴を開け、自然落下で容器より外に流れ出るようにした容器 - 特許庁
<前へ 1 2 .... 23 24 25 26 27 28 29 30 31 .... 145 146 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.