「In Parallel」を含む例文一覧(34792)

<前へ 1 2 .... 55 56 57 58 59 60 61 62 63 .... 695 696 次へ>
  • To enable high-quality printing control by preventing variation in printing trigger in any of a serial mode and a parallel mode.
    シリアルモードまたはパラレルモードのいずれにおいても印字トリガのばらつきを防いで高品質の印字制御を可能とする。 - 特許庁
  • Further, the partitioning wall B exists in parallel with the adjacent partitioning wall A, but their side faces do not come in touch with each other.
    また、区分壁Aの隣には、区分壁Bが並行して存在するが、互いに側面同士が接することはない。 - 特許庁
  • To compute the degree in parallel between a polishing pad and a wafer in a short time, and to reduce the consumption of useless material.
    短時間でウェハと研磨パッドの平行度を算出でき、無駄な消耗材料を低減することを課題とする。 - 特許庁
  • The scale includes a ruler surface, main graduation for partitioning in an approximately parallel direction, and sub-graduation for dividing the main graduation in an oblique direction.
    定規面と、略平行方向に区分する主目盛と、主目盛を斜め方向に分割する副目盛とを備る。 - 特許庁
  • The slit 11 is formed from the slope 10 in the burner cap 2 at an inclination approximately in parallel to the slope 10.
    バーナキャップ2に上記傾斜面10から上記傾斜面10とほぼ平行な傾斜でスリット11を形成する。 - 特許庁
  • To prolong service life of a lip seal provided in parallel with a bearing without shortening service life of the bearing in fluid machinery.
    流体機械における軸受けの寿命を短くすることなく、軸受けと並設されたリップシールの寿命を延ばす。 - 特許庁
  • Respective spacers are formed in nearly disk shapes, and have center axes extending almost in parallel with the first and the second substrates.
    各スペーサは、ほぼ円盤状に形成され、第1および第2基板とほぼ平行に延びた中心軸を有している。 - 特許庁
  • The soft magnetic layer has a thickness in which the magnetization directions stably coincide with facial directions in parallel with the substrate face during recording/reproducing.
    なお、軟磁性層は、記録再生の際に基板面と平行な面方向に安定に磁化の向きが揃う厚みを持つ。 - 特許庁
  • Areas disposed in parallel with a constant interval in a circumference direction are formed at three sections of the groove 49a or 49c.
    溝49a乃至49cは円周方向に同間隔で平行に配設される範囲が三箇所形成されている。 - 特許庁
  • All the rod heaters 2 are made in parallel to one another and staggeringly arranged by viewing it from the one end side in the longitudinal direction.
    全ての棒状ヒータ2を互いに平行にし、かつその長さ方向の一端側から見て千鳥配置状とする。 - 特許庁
  • To display plural input values or calculated results in parallel by arranging display sites in plural stages.
    表示部位を複数段に分けて配置することにより、複数の入力値や計算結果を並列表示可能にする。 - 特許庁
  • To supply a program code input from a single terminal to a plurality of BIST (Built-In Self Test) circuits in parallel.
    単一の端子から入力したプログラムコードを複数のBIST(組み込み自己テスト)回路へ並列に供給する。 - 特許庁
  • A lot of cell tubes of cylindrical fuel cells are arranged and fixed in parallel to each other in a fuel cell module.
    燃料電池モジュールの内部に多数の円筒型の燃料電池のセルチューブが互いに平行に並べて固定される。 - 特許庁
  • To enable a plurality of transmission and reception systems to share one antenna in parallel without causing any inconvenience in mounting.
    実装上の不都合を招かずに複数の送受信系で並行して1つのアンテナを共用できるようにする。 - 特許庁
  • A cleaning step of the separation pawl is carried out in parallel with a toner replenishing step in which continuous image formation is temporarily interrupted.
    連続画像形成が一時、中断されるトナー補給工程と並行して分離爪のクリーニング工程を実施する。 - 特許庁
  • A digital signal processor (9) is connected in parallel with the FPGA system (5) in order to calculate controls with low phase loss requirements.
    デジタル信号プロセッサ(9)は、FPGAシステム(5)と並列接続し、低位相損失要件を有する制御を計算する。 - 特許庁
  • To perform preparation work for clinical examination in an examination room in parallel to the warming-up operation of an X-ray tube.
    X線管のウォーミングアップ動作と並行して、検査室にて臨床のための準備作業の実施を可能にする。 - 特許庁
  • An apparatus for image formation or an image processor convert color shifts and resolutions in pixel units simultaneously in parallel.
    画像形成装置または画像処理装置が、色ずれと解像度の変換とを画素単位で同時並行的に実行する。 - 特許庁
  • A plate 1 is disposed in a susceptor 3 so that its main surface is directed in substantially parallel direction to a flow of a reactive gas.
    基板1は、主面が反応ガスの流動方向とほぼ平行な方向となるようにサセプタ3内に配置される。 - 特許庁
  • In this antenna device, a first and second antennas 1a and 1b are provided in almost parallel with each other at both ends of a circuit board 3, respectively.
    第1のアンテナ1aと第2のアンテナ1bがそれぞれ回路基板3の両端に略平行に設けられている。 - 特許庁
  • Developing cartridge 6 are provided according to four photosensitive drums 4 arranged in parallel in a front-and-rear direction.
    前後方向に並列に配置された4つの感光ドラム4にそれぞれ対応して、現像カートリッジ6が設けられている。 - 特許庁
  • Plane internal electrodes 14 and 15 are arranged in the same plane, extending in parallel.
    それぞれ面状の内部電極14及び内部電極15が、同一平面内で相互に並んで延びるように配置される。 - 特許庁
  • Solar cells 18 and 19 for charge and a blocking diode 20 are connected in series, in parallel with this battery 23.
    このバッテリ23に並列に充電用太陽電池18、19およびブロッキングダイオード20が直列接続される。 - 特許庁
  • In the carrying vehicle system 1, a first normal line 11a and a first bypass line 12a are arranged in parallel.
    搬送車システム1において、第1通常ライン11aおよび第1バイパスライン12aは並んで配置されている。 - 特許庁
  • A revolving shaft 46 of a lifter 44 in the circulation-type lift device 39 is extended in parallel with the longitudinal direction of shelves.
    循環式リフト装置39におけるリフター44の周回軸46を、棚の長手方向と平行に延びるように設定する。 - 特許庁
  • Two tubes 8 having lumens for sending a liquid are disposed in parallel in the insertion section 3 of the treatment tool 1.
    処置具1の挿入部3は、送液に用いられるルーメンが形成されたチューブ8が並列に2つ設けられている。 - 特許庁
  • The circuit performs saturation correction by moving the hue points in the area in the direction parallel to a specific hue line L0.
    この領域内の色相点を特定色相直線L0に平行する方向に移動させて、彩度補正を行う。 - 特許庁
  • The platen holder 21 on the other side is fitted to a fitting hole 22a formed in a frame 22 provided in parallel to the partition wall 12.
    他方のプラテンホルダ21は、隔壁12に平行に設けたフレーム22に形成した取付孔22aに取り付ける。 - 特許庁
  • In proximity to a plane of the circuit substrate 1, a flexible substrate 4 of a specific shape and size is arranged almost in parallel.
    回路基板1の平面と略平行に近接させて、所定形状・所定サイズのフレキシブル基板4を配する。 - 特許庁
  • Since the zero detection is executed in parallel with the addition, its speed is high in comparison with a case that the zero detection is executed after the addition.
    ゼロ検出は加算と並行して実行するため、加算後にゼロ検出を行う場合に比べて高速である。 - 特許庁
  • To easily perform the installation work in arranging a plurality of floor heating mats on a floor in parallel with each other.
    床に対し複数の床暖房マットを互いに並設するように設置するときの設置作業が容易にできるようにする。 - 特許庁
  • A switching element 330 for switching on/off in the period of a reset signal RESET is provided in parallel with the capacitor 320.
    キャパシタ320には並列にリセット信号RESETの周期でオン・オフするスイッチング素子330が設けられている。 - 特許庁
  • The conveyance electrodes 133a are disposed in parallel with each other in the sub-scanning direction.
    複数の搬送電極133aが、互いに平行に配置されていて、且つ副走査方向に沿って配列されている。 - 特許庁
  • The support panels 1, 1 are arranged parallel with each other in the vertical direction at an interval in the horizontal direction.
    各支柱パネル1、1は、水平方向に間隔をあけてそれぞれが鉛直方向に、且つ、互いに平行に配置する。 - 特許庁
  • A traveling carriage 50 traveling in linkage with and in parallel with the traveling of the stacker crane is installed on the lower side of the conveyer 15.
    スタッカークレーンの走行と連動して並行に走行する走行台車50をコンベア15の下側に設置する。 - 特許庁
  • A resistor and a capacitor may be coupled in parallel between a power supply input node and a substrate node included in the semiconductor.
    抵抗器およびコンデンサは、半導体に含まれる、電源入力ノードと基板ノードとの間に並列に連結され得る。 - 特許庁
  • This allows bidirectional serial control terminals and indicator terminals in the parallel control to be used in common, thereby reducing the terminal number.
    これにより双方向シリアル制御端子とパラレル制御時のインジケーター端子が共用でき、端子数が削減できる。 - 特許庁
  • In the semiconductor storage device, dummy bit lines 7a are formed in parallel with bit lines 7 separately from the same layer as that of the bit lines 7.
    ダミービット線7aは、ビット線7と同一の層から分離して形成され、かつビット線と並走している。 - 特許庁
  • The grill in which a plurality of bars 2 are constructed parallel on an approximately rectangular outer frame 1 to be formed in a grid form is provided.
    略矩形状の外枠1に複数の棧2を平行に架設して格子状に形成したグリルの焼き網である。 - 特許庁
  • To prevent noise generated in a parallel bus drive circuit from mixing in an effective video pixel range at an analog processing system.
    パラレルバスドライブ回路で発生するノイズが、アナログ処理系での有効映像画素範囲に混入しないようにする。 - 特許庁
  • An electromagnetic wave is polarized chemically as radiated from an antenna positioned in parallel to a cross section in an asymmetric electromagnetic field.
    非対称性電磁場の断面に平行におかれたアンテナから放射される電磁波は化学的に極性化されている。 - 特許庁
  • A capacitor C10 for filter is connected in parallel with a diode D10 for charging provided in a divided voltage smoothening circuit DVR.
    分電圧平滑回路DVR中の充電用ダイオードD_10に対してフィルタ用コンデンサC_10を並列に接続する。 - 特許庁
  • Further, a bypass diode is connected between each contiguous relay terminal 63 in such a manner that it becomes in parallel arrangement against each cell group 9.
    また、隣接する中継端子63間には各セル群9に並列となるようにバイパスダイオードが接続されている。 - 特許庁
  • That is, a pair of holding parts 42, 43 are provided in parallel in a concentric circle form centered on the wire harness W.
    すなわち、ワイヤハーネスWを中心として同心円状に並行して一対の支持部42,43が設けられている。 - 特許庁
  • The first lens array comprises a plurality of first lenses extending in one direction and arranged in parallel to one another.
    第1のレンズアレイは方向に沿って延在すると共に互いに平行に配置された複数の第1レンズからなる。 - 特許庁
  • In this structure, exterior of the building 1 can be formed by arranging a plurality of windmill exterior panels 7 in parallel.
    該構造において、建物1の外装は、風車外装パネル7を複数並列状態に設置して形成するとよい。 - 特許庁
  • In the imaging apparatus capable of capturing still images in parallel with recording moving images, an imaging section 4 captures images.
    動画像の録画と並行して、静止画像を撮像可能な撮像装置において、撮像部4は画像を撮像する。 - 特許庁
  • The slits 9 are provided in parallel with a substantially constant pitch and are formed in a slanted direction with respect to the intermediate plate 3.
    スリット9は、略一定のピッチで並列に設けられ、且つ中間プレート3に対し斜め方向に形成されている。 - 特許庁
  • The plurality of piezoelectric oscillators 33 are provided in parallel, in a row along an oscillator aligning direction orthogonal to the laminating direction.
    複数の圧電振動子33は、積層方向に直交する振動子配列方向に沿って一列に並設されている。 - 特許庁
  • The bottom wall 3 includes a first bottom wall part 3a and a second bottom wall part 3b that are arranged in parallel in the longitudinal direction of the bottom wall.
    底壁3は、その長手方向に並設される第1底壁部3aおよび第2底壁部3bを含む。 - 特許庁
<前へ 1 2 .... 55 56 57 58 59 60 61 62 63 .... 695 696 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.