「Spring」を含む例文一覧(40241)

<前へ 1 2 .... 224 225 226 227 228 229 230 231 232 .... 804 805 次へ>
  • To perform screwing surely by preventing breakage when a spring plunger is screwed in.
    スプリングプランジャをねじ込む際に破損するのを防止し、ねじ込みを確実に行えるようにする。 - 特許庁
  • A spring 4 is disposed between the toilet paper roll R at the bottom and the bottom 1a of the cylindrical body 1.
    最も下方のトイレットペーパーロールRと筒体1の底1aとの間にバネ4を配設した。 - 特許庁
  • The seal assembly (10) may generally include a turbine seal (18) and a spring member (20).
    隣シール・アセンブリ(10)は一般的に、タービン・シール(18)とバネ部材(20)とを含んでいても良い。 - 特許庁
  • The clutch cover assembly includes the clutch cover 2, a pressure plate 3, and the diaphragm spring 4.
    このクラッチカバー組立体は、クラッチカバー2と、プレッシャープレート3と、ダイヤフラムスプリング4と、を備えている。 - 特許庁
  • A poppet (35) and a plate spring (38) are inserted into the poppet storage hole (36) and fastened by a retainer (39).
    ポペット格納穴(36)にポペット(35)と皿バネ(38)を挿入してリティナ(39)で締め付ける。 - 特許庁
  • To provide a coil spring which is low in cost and good in responsiveness to a temperature change, and its manufacturing method.
    低コストで、温度変化への応答性が良いコイルばねおよびその製造方法の提供。 - 特許庁
  • To provide a device capable of burning an incense stick securely for a long time by setting the wire diameter of a spring wire.
    バネ線の線径をより大にして長期間確実に燃焼が行える器具を実現する。 - 特許庁
  • Outfielder Matsui Hideki started spring training with the New York Yankees in Tampa, Florida, on Feb. 18.
    松井秀喜外野手は,2月18日,フロリダ州タンパで,ニューヨーク・ヤンキースでの春季キャンプを開始した。 - 浜島書店 Catch a Wave
  • In this year's spring tournament at Koshien, he became the 12th pitcher to accomplish a no-hitter in the history of the tournament.
    今年の春の甲子園では,ノーヒットノーランを達成した大会史上12人目の投手となった。 - 浜島書店 Catch a Wave
  • Sap is collected during a three-to-six-week period in early spring before the maple trees begin putting out leaves.
    樹液は,カエデの木が芽を出し始める前の,早春の3~6週間の間に集められます。 - 浜島書店 Catch a Wave
  • Usually, bicycles sell well in the spring, but then sales drop in June because of the rainy season.
    通常,自転車は春によく売れるが,その後梅(つ)雨(ゆ)のため6月には売り上げが落ちる。 - 浜島書店 Catch a Wave
  • At four different sites in the city, more than 5,600 colorful carp streamers are waving in the spring wind.
    市内の異なる4会場で5600匹以上の色鮮やかなこいのぼりが春風に揺れている。 - 浜島書店 Catch a Wave
  • He will play for the J. League club Shimizu S-Pulse after graduating from high school this spring.
    彼は,今春高校を卒業した後,Jリーグクラブの清(し)水(みず)エスパルスでプレーする予定だ。 - 浜島書店 Catch a Wave
  • By next spring, Bandai hopes to use the smaller capsules in 40 percent of its 200-yen products.
    来春までに,バンダイは200円商品の40%で小型カプセルを使用したいと考えている。 - 浜島書店 Catch a Wave
  • Moreover, torafugu grown in the sea are poisonous, while those grown in the hot spring water are not.
    さらに,海で育てられたトラフグには毒があるが,温泉水で育てられたものには毒がない。 - 浜島書店 Catch a Wave
  • LITHOGRAPHIC APPARATUS AND DEVICE MANUFACTURING METHOD UTILIZING MEMS MIRROR WITH LARGE DEFLECTION BY NON-LINEAR SPRING
    非線形バネによる大変形MEMSミラーを用いる露光装置及びデバイス製造方法 - 特許庁
  • MULTI-FUNCTIONAL TIMEPIECE HAVING SECTORIAL HAND MOVEMENT MECHANISM INCLUDING RETURN SPRING, AND SECTORIAL HAND MOVEMENT WHEEL TRAIN DEVICE
    戻しばねを含む扇形運針機構を有する多機能時計および扇形運針輪列装置 - 特許庁
  • During the steam-sterilizing, the closed state of the valve is held by the energization of the spring 25.
    水蒸気滅菌中は、コイルバネ25の付勢力により、通気弁の閉状態が保持される。 - 特許庁
  • To provide a bush appropriately adjusting torsional directional rigidity or spring constant.
    こじり方向の剛性すなわちばね定数を適宜調整することができるブッシュを提供すること。 - 特許庁
  • A back yoke (63B) of a voice coil motor is fixed to a head lift body (52A) by a flat spring member (66).
    ボイスコイルモータのバックヨーク(63B)は、板バネ部材(66)によりヘッドリフトボディ(52A)に固定される。 - 特許庁
  • This evaluation device 10 is provided with a device body 12, a torque mechanism 13, a spring mechanism 14 and the like.
    評価装置10は、装置本体12、トルク機構13、ばね機構14等を備えている。 - 特許庁
  • A coil spring 2 supporting the saddle P at a fixed height is mounted in the inside of a support pipe 1.
    サドルPを一定の高さに支持するコイルスプリング2を支持パイプ1の内部に装着する。 - 特許庁
  • Consequently, the lowering of the functions of the flow characteristics due to the radial deviation of the spring is improved.
    これにより、スプリングの径方向のズレ込みによる、流量特性の機能低下を改善した。 - 特許庁
  • The basic torsional deformation of a coil spring is adjusted by the rotation of the serration body 71.
    セレーション体71の回転によって巻バネ79の基底的な捻れ変形量を調整する。 - 特許庁
  • The poultry rearing method is for rearing poultry by feeding hot spring water.
    家禽類の飼育方法は、温泉水を与えて家禽類を飼育することを特徴とするものである。 - 特許庁
  • To allow accurately determining presence of abnormality of a return spring in an electronic throttle system.
    電子スロットル制御システムのリターンスプリングの異常の有無を精度良く判定できるようにする。 - 特許庁
  • The clamping nail 6a is supported against the slider 7 through an elastic means such as a spring 10 and others.
    クランプ爪6aは、スライダー7に対してスプリング10等の弾性手段を介して支持されている。 - 特許庁
  • To make freely settable the ejecting force of a disk tray with a simple spring occupying a small space.
    ディスクトレーのイジェクト力を、簡単で、小スペースのバネで自由に設定できるようにすること。 - 特許庁
  • The spring plate 16 and the cover plate 18 are made of a material having a large heat transfer coefficient.
    スプリングプレート16及びカバープレート18は、熱伝達率の大きい材料から形成される。 - 特許庁
  • Auxiliary compression and auxiliary tension are also included as the auxiliary load given to the weight 12 by the auxiliary spring 18.
    補助ばね18の重り12に対する予備荷重には、予備圧縮、予備引張りが含まれる。 - 特許庁
  • The lever member 22 and the reverse plate 25 are urged to the neutral position by a spring 23.
    また、レバー部材23およびリバースプレート25はスプリング23により中立位置に付勢されている。 - 特許庁
  • The coil spring member can be suitably formed in a conical shape with its different outer periphery diameters at both ends.
    コイル状バネ部材は、両端の外周径が異なる錐形状とすることも好適である。 - 特許庁
  • The metal blade 4 obtains a predetermined spring property in this notched and erected shape.
    このような切り起こし形状とすることにより、金属羽4は所定のバネ性を得ることができる。 - 特許庁
  • To provide a tape cartridge in which the deformation of a spring member for holding a leader member is prevented.
    リーダ部材を保持するばね部材の変形を防止するようにしたテープカートリッジを提供する。 - 特許庁
  • An acceleration sensor 2 is mounted through a coil spring 4 on a steam trap 1 as a vibration generator.
    振動発生体としてのスチームトラップ1にコイルばね4を介して加速度センサ2を取り付ける。 - 特許庁
  • A motor 1 comprises motor part bodies, such as brush 2, a coil 6, a brush holder 4, a spring 9, and the like.
    モータ1は、ブラシ2,コイル6,ブラシホルダー4,スプリング9などのモータ用部品本体を有する。 - 特許庁
  • To provide an air spring with damping without attaching an auxiliary tank and an oil damper.
    補助タンクや、オイルダンパを付設することなく、空気ばねに減衰を付与した空気ばねを提供する。 - 特許庁
  • For this purpose, a resin spring of a reversed U-shape extended from a rotation prevention frame is formed.
    その手段として、回転止め本体から延ばした逆U字型の樹脂ばねを形成する。 - 特許庁
  • The housing 12 accommodates a thrust force converting mechanism 9, an adjust nut 14, and a cam spring 23.
    ハウジング12内に、推力変換機構9と、アジャストナット14と、カムスプリング23とを収容する。 - 特許庁
  • Two heat sources of sunlight and geothermal heat (hot spring) are used for two heat exchangers as electric power sources.
    電力源に、太陽光と地熱(温泉)の二者熱源を二つの熱交換器を用いて。 - 特許庁
  • The coupling part 6a4 of the spring member is formed to be embedded in this protrusion 6b.
    この突起体6b内にばね部材6aの連結部6a4が埋め込み形成されている。 - 特許庁
  • The leaf spring 31 comprises a base 31a, a first inclined part 31b, a horizontal part 31c, and a second inclined part 31d.
    板ばね部31は、ベース部31aと第1傾斜部31bと水平部31cと第2傾斜部31dとよりなる。 - 特許庁
  • A spring 10 for pressurization for pressurizing the brush 2 in the direction of pressing is provided on the brush swing arm 3.
    ブラシ揺動アーム3にはブラシ2を押付方向に加圧する加圧用バネ10を設ける。 - 特許庁
  • A torsion coil spring 44 is mounted between the friction member 42 and the roll holding member 43.
    摩擦部材42とロール保持部材43との間には、ねじりコイルばね44が介装されている。 - 特許庁
  • SEISMIC ISOLATOR USING SPRING AND QUADRANGULAR-, PENTAGONAL-, HEXAGONAL-, HEPTAGONAL- AND OCTAGONAL-SHAPED SILL
    スプリングと四角形、五角形、六角形、七角形及び八角形の土台を使った免震装置。 - 特許庁
  • A tensile coil spring 9 is positioned across a portion extending between the governor lever 3 and the speed regulation lever 6.
    ガバナレバー3と速度調整レバー6とに亘って高速用引っ張りコイルバネ9を架け渡す。 - 特許庁
  • The body 12 has a torsion spring 3 for pressing the butterfly valve elements 2 in their closing directions.
    また、本体12には、バタフライ弁体2,2を閉じる方向に付勢するねじりばね3を有する。 - 特許庁
  • To provide technology improving durability of a coil spring in a cable type operating device.
    ケーブル式操作装置において、コイルバネの耐久性を向上することができる技術を提供する。 - 特許庁
  • A spring 27 for braking force generation is provided on the side of the travelling body frame 3a of the link 28.
    リンク28の走行体フレーム3a側に制動力発生用スプリング27を設ける。 - 特許庁
  • The spring member 20 facilitates relative movement between the pressure transducer 14 and the valve stem 12.
    スプリング部材20は、圧力変換器14と弁棒12との間の相対的移動を容易にする。 - 特許庁
<前へ 1 2 .... 224 225 226 227 228 229 230 231 232 .... 804 805 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.
  • 浜島書店 Catch a Wave
    Copyright © 1995-2026 Hamajima Shoten, Publishers. All rights reserved.