「avoiding」を含む例文一覧(12507)

<前へ 1 2 .... 189 190 191 192 193 194 195 196 197 .... 250 251 次へ>
  • To provide a program, a method and a system for acquiring support information of software, with which support information for avoiding an error can be acquired without permitting a user side to perform special work, and to provide a recording medium.
    ユーザ側が特別な作業を行わずにエラー回避のためのサポート情報を取得することのできるソフトウェアのサポート情報取得プログラム、サポート情報取得方法およびサポート情報取得システム、並びに、記録媒体を提供すること。 - 特許庁
  • To provide a water-stream pulsation generating device having an inexpensive and compact constitution for generating pulsation in a water stream without wasting electric energy while avoiding the generation of noise caused by the vibration of a motor during generating the pulsation.
    電気エネルギーを消費することなく水流に脈動を発生させることができ、コストも安価で装置もコンパクトに構成でき、更に脈動発生に際してモータ振動等の騒音を発生させることのない水流の脈動発生装置を提供する。 - 特許庁
  • The top of the angular part 11 on the side of the main foot 1A ceases to be pressure-contact or collide with the V-shaped groove 12 by formation of the cut 14, and this iron core can prevent the deterioration of the insulation property, avoiding damages to the junction 4A.
    前記切欠き部14の形成により、中央主脚1A側のV字形状部11の頂点がV字形状溝12に圧接、衝突することがなくなり、接合部4Aの損傷を回避して絶縁特性の悪化を防ぐことができる。 - 特許庁
  • To provide a liquid droplet discharge apparatus capable of avoiding a state in which a water head difference between a liquid material in a relay tank and a liquid material located at the discharge opening of a discharge head cannot be appropriately maintained as the surface of the liquid material ripples.
    液状体の液面が波立つことで、中継タンク内の液状体と、吐出ヘッドの吐出口に位置する液状体との水頭差が適切に維持できなくなることを抑制することができる液滴吐出装置を提供する。 - 特許庁
  • To guide and support a switch piece so that it can slide to the right and left while avoiding interfering of the switch piece with a positioning key in a tape cartridge where a reference hole for positioning is opened adjacent to the sliding area of the switch piece for preventing erroneous erasing.
    位置決め用の基準穴が、誤消去防止用の切換えピースのスライド領域に隣接して開口してあるテープカートリッジにおいて、切換えピースを、これが位置決めピンと干渉するのを避けながら、左右スライドできるように案内支持する。 - 特許庁
  • To prevent the elapse of a long period of time until a level in a boiler is lowered to the normal ON-level of a feed water pump after a level in a steam and water separator is swollen upon initial sending of steam after starting a boiler and permit the avoiding of the continuation of a low level.
    ボイラの起動後の初期送気時に気水分離器の水面が盛り上がり、通常の給水ポンプのオンレベルとなる水位に下がるまで、時間が長く掛からないように、また低水位が続くのを回避できるようにすること。 - 特許庁
  • To provide a boom of a hydraulic excavator with a curved structure capable of improving its strength, extending its service life, reducing its weight, and attaining a small scale of a power unit such as an engine by avoiding stress concentration caused by deformation at a portion other than the surface of the boom, and its manufacturing method.
    ブームの面外変形による応力集中を避けて、ブームの強度向上、延命化、軽量化、エンジン等のパワーユニットの小規模化が達成できる湾曲部構造を有する油圧ショベルのブームとその製造方法を提供する。 - 特許庁
  • Further, for avoiding the erroneous output of the flow-rate of the powdery material caused by gas component and change of moisture during purging in a divided pipe with a powdery material flow-rate mask treating part 21, the mask treatment of the powdery material flow-rate for a fixed time during stopping and after starting the injection, is performed.
    さらに、21にて支管パージ中に気体成分および湿度変化等から誤って粉体流量が出力されることを避けるため、停止中および吹込み開始後の一定時間粉体流量のマスク処理を実施する。 - 特許庁
  • To provide a control device for a boiler capable of reducing the concentration of NOx generated in the boiler to a desired value by avoiding a situation wherein operation of a soot blower becomes a disturbance of a control system and properly setting an air supply amount to the boiler.
    本発明の目的は、スートブロワの作動が制御系の外乱となる状況を回避してボイラへの空気供給量を正しく設定してボイラで発生するNOx濃度を所望の値に低減可能にしたボイラの制御装置を提供する。 - 特許庁
  • Further, the width dimension of the side face of the receptacle 54 is not increased more than required and the optical signal transmission apparatus 12 is not upsized by avoiding the optical signal reception section 28 and the optical signal transmission section 26 from being arranged side by side.
    また、光信号受信部28と光信号送信部26とをレセプタクル54の同一側面に並べて配置しないことで、レセプタクル54の側面の幅寸法が必要以上に大きくならず、光信号伝送装置12が大型にならない。 - 特許庁
  • To switch a clock path automatically due to occurrence of a fault of a transmission line by avoiding a clock signal blocking state, to build up a loop synchronization network at a low cost with high reliability and to automatically switch the clock path in all the loop synchronization network.
    クロック信号閉鎖状態を回避して伝送路障害発生によるクロックパスの切り替えを自動的に行うと共に、低コストかつ高信頼性のループ同期網の構築を可能にし、かつ、全ループ同期網でクロックパスを自動的に切り替える。 - 特許庁
  • To enable a player to taste the mood of participating in fighting more by not only watching fighting and avoiding actions in the fighting part of a simulation game but reflecting the will and action of a player in the result of fighting to improve the interactive property.
    シミュレーションゲームの戦闘パートにて戦闘、回避行動をただ見ているのではなく、プレーヤーの意思行動を戦闘結果に反映させることでインタラクティブ性を高め、より戦闘に参加している気分をプレーヤーに味わってもらうことを可能とする。 - 特許庁
  • To provide a precast member for constructing, at a low cost, a structure harmonizing with natural scenery and contributing to the restoration of the natural environment by avoiding no sense of incongruity in a molding pattern imitating masonry work or the like even if a large number of the precast members are combined.
    多数の部材を組み合わせて構築しても、表面の石積み等を模擬する造形模様に違和感がなく、自然景観と融和し、自然環境の復元につなげられる構築物を構築するためのプレキャスト部材を低コストで提供する。 - 特許庁
  • To stably generate a lattice by avoiding a failure in tetrahedral lattice generation due to the deadlock for tetrahedral element cutting out in a method using an advancing front method that generates a tetrahedral lattice by three- dimensional Delaunay division.
    三次元のドローネ分割によって四面体格子を生成する、 アドバンシング・フロント法を用いた方法において、 四面体要素の切り出しに行き詰まることによる 四面体格子生成の失敗を回避し、安定に格子生成できるようにする。 - 特許庁
  • To provide an energy beam irradiator capable of deoxygenating an irradiation zone of an irradiation object by inhibiting gas from flowing into an electron beam generating section, reducing the capacity of a differential exhausting pump and avoiding scattering of an electron beam.
    電子線発生部へのガス流入を防止しつつ差動排気用ポンプにおける容量低減を図るとともに電子線の散乱を防止し、被照射体における照射領域の脱酸素化を図ることができるエネルギ線照射装置を提供する。 - 特許庁
  • Information on predicted risk including corrective measures (safety measures) for avoiding the risk against the work description specified by inputted information from a client 46 on the construction site is generated by a server 10 at a central office to be outputted to the client 46.
    工事現場クライアント46からの入力情報により特定された作業内容に対し危険を回避する是正措置(安全対策)を含む危険予知情報を本社サーバ10で生成して建設現場クライアント46に出力する。 - 特許庁
  • To supply a lubricating oil between a large end of a connecting rod and a crank pin while reducing a size and a weight of an engine by avoiding a load capacity reduction of a main bearing metal between a bearing of a crankcase and a crank journal.
    多気筒エンジンにおいて、クランクケースの軸受部およびクランクジャーナル間のメイン軸受メタルの負荷容量減少を回避して、エンジンの小型化および軽量化を図りつつ、コネクティングロッドの大端部およびクランクピン間に潤滑用のオイルを供給する。 - 特許庁
  • A lid 15 is fixed to a box shape vessel body 12 with an open upper end by way of an O-ring 13, twist locks 16 are provided to the upper corners of the vessel body 12 and buffers 17 are provided by avoiding the upper surfaces of the twist locks 16.
    上部が開口した箱状をなす容器本体12にOリング13を介して蓋15を固定可能とし、容器本体12の上角部にツイストロック16を設けると共に、ツイストロック16の上面に回避して緩衝体17を設ける。 - 特許庁
  • To provide an outer member for constant velocity universal joint excellent in a same axial degree and at the right angle degree between a shaft part and a cup part while avoiding as much as possible generating a core-shifting or an inclination between a punch and a die for forming the cup part at the forging-formation time.
    鍛造成形時に、カップ部成形用のパンチとダイとの間で芯ずれあるいは傾きが生じるのを極力避けて、軸部とカップ部との間の同軸度および直角度に優れた等速自在継手用の外方部材を提供する。 - 特許庁
  • To provide a belt guide structure of a vehicle capable of installing its retractor in a relatively free arrangement, and even when another vehicle mounting part exists between the retractor and an anchor, capable of avoiding an interference of the vehicle mounting part with a seat belt while the constitution remains simple.
    リトラクタを比較的自由に配設することができ、リトラクタとアンカとの間に他の車載部位が介在する場合でも当該車載部位とシートベルトとの干渉を簡易な構成で回避可能な車両のベルトガイド構造を提供する。 - 特許庁
  • There is an opening (p) in the long side section side parallel with the long side section in a position avoiding the planting hole opening section in the surface of the front sheet, and one or more bag bodies (8) communicating the inside to a space (s) between both front and back sheets is formed.
    更に、該表シートの表面の該植穴開口部を避けた位置には、該長辺部と平行で、該長辺部側に開口(p)を有し、かつ内部が該表裏のシート間の空間(s)に連通する一つ以上の袋体(8)が形成されている。 - 特許庁
  • To provide a spindle device capable of efficiently exhausting air supplied to a spindle bearing to the outside to lubricate a bearing, avoiding a rise of an abnormal temperature due to filling of heat, and rotating a spindle at a stable temperature.
    軸受潤滑のために主軸軸受に供給されるエアを効率良く外部に排気できて、熱のこもりによる異常温度上昇を回避することができ、安定した温度で主軸の回転を可能にできる主軸装置を提供する。 - 特許庁
  • To provide a method for sorting hen eggs, capable of avoiding the receiving of a hen egg having such a large major axis that can not be received in concavitys of a pack container, when the hen eggs graded for every weight class are each received in the pack container corresponding to the weight class, and to provide an apparatus for the same.
    重量区分毎のパック容器へ当該重量区分の鶏卵を収納するにあたって、パック容器の凹部に収納できないような長軸の長い鶏卵の収納を回避する選別方法及びその装置を提供する。 - 特許庁
  • To provide an electroacoustic transducer by avoiding an end of a terminal from being caught by a board or the like in the case of mounting the transducer to a board of various devices thereby obtaining a stable mount state and a stable function.
    各種機器の基板に実装する際に、端子の端が基板等に引っかかってしまうようなことをなくし、それによって、安定した実装状態及び安定した機能を得ることを可能にする電気音響変換器を提供すること。 - 特許庁
  • To provide a wiring structure for electric wires in an electric connection box and a wiring method in the connection box capable of avoiding laying a bundle of electric wires in the neighborhood of electric components as heat source which emits the heat having a relatively high temperature for a comparatively long period of time.
    比較的長い期間、比較的高い温度の熱を発する熱源となる電気部品の近傍に電線の束が通ることを回避するための、電線配索構造、および電気接続箱内での電線の配索方法を提供すること。 - 特許庁
  • To provide a method for supporting a sculptured surface reflection mirror for mostly eliminating influences by thermal deformation of a sculptured surface reflection mirror from the effective reflection range of the mirror and for avoiding substantial influences in the effective reflection range, moreover, in a display area, and to provide a sculptured surface reflection mirror using the above method.
    自由曲面反射ミラーの熱変形による影響をその有効反射範囲からほぼ外し、有効反射範囲さらには表示領域には実質的な影響が出ない様にする自由曲面反射ミラーの支持方法である。 - 特許庁
  • To provide a synchronization state detecting system for excluding instability of operations of post-stage circuits, by avoiding detecting operations of synchronization/out of synchronism from being repeated, even if the quality of a communication channel has deteriorated, when a synchronization state is detected.
    同期状態が検出されている場合に、通信回線品質が悪化しても、同期引込み/同期外れ検出動作を繰返すことがないようにして、後段の回路動作の不安定性を排除する同期状態検出方式を得る。 - 特許庁
  • To quickly carry out a comprehensive quality determination based on inspection data on the quality of a metal strip by reducing the load of a confirmation operation of the running distance of the metal strip, facilitating the input of the inspection data and avoiding the duplication of input jobs of the inspection data.
    金属帯の品質検査において、金属帯の走行距離の確認作業負荷を軽減し、検査データの入力を容易にし、かつ検査データ入力作業の重複を省き、検査データに基づく品質の総合判定を迅速に実施する。 - 特許庁
  • To provide a method of low-temperature thermal decomposition and a furnace for low-temperature thermal decomposition adapted to perform efficient low-temperature thermal decomposition of a waste material reliably avoiding a decomposition temperature at which a large amount of dioxin and/or NOx is produced without implementing any complicated heat management and without using a large amount of supplementary fuel.
    複雑な熱管理を行うことなく、しかも多量の補助燃料を使用することなく、ダイオキシンやNOxが大量に発生する分解温度を確実に回避して、廃棄物の効率的な低温熱分解を行う。 - 特許庁
  • To provide a rocking cam type engine variable valve gear for actualizing smooth operation of a link mechanism while reducing the rotating track range of the link mechanism, and for preventing the seizure by avoiding a pin portion link to excessively hit the thrust restricting face of an eccentric portion.
    揺動カム式のエンジンの可変動弁装置を、リンク機構の回転軌跡範囲が小さく、リンク機構の動作が円滑なものとし、且つ、ピン部リンクと偏心部側のスラスト規制面との間の過度な当たりをなくし、焼付きを防止できるようにする。 - 特許庁
  • When the detector 24 is mounted on the lateral section disposed at the upstream position relative to the rotational direction of the screw of the horizontal conveyor 8, the grain is more certainly prevented from directly contacting with the sensor 24 for bringing a larger advantage of avoiding any erroneous detection.
    ここで、横送りコンベア8のスクリュー回転方向の上手側となる方向の横側部にセンサ24を設けると、一層、吐出される穀粒がセンサ24に直接ふりかかりにくくなって、誤感知を防止する効果が一層高まる。 - 特許庁
  • To provide an inspection probe capable of avoiding disadvantages and extending useful life of a probe while reducing the production cost by giving a sure uniform contact between a sensor and an inner wall.
    本発明の目的は、センサーと内壁との間に確実な均一な接触を与えることによって、これらの欠点を回避し、かつ、同時に製造コストを減じながら、プローブの耐用寿命を延ばすことを可能にする検査プローブを提供することにある。 - 特許庁
  • To present an optimal route while reducing the amount of data transferred between a communications navigation terminal and a map-information providing communications center device, and avoiding an increase in the processing scale or device scale of the communications navigation terminal.
    通信ナビゲーション端末と地図情報提供通信センタ装置との間で送受信されるデータ量を低減すると共に通信ナビゲーション端末における処理規模或いは装置規模の増大を抑制しつつ、最適経路を提示できるようにする。 - 特許庁
  • To provide a steel member used as a coupling member between beams of a building or earthquake resisting walls for a high-rise building, which is capable of avoiding the occurrence of rupture of fixed end and of plastic bucking of anti-symmetric torsion accompanied with the earthquake.
    建物の梁や高層ビルの耐震壁同士の連結部材として用いられる鋼製部材であって地震発生に伴うその固定端の破壊および逆対称ねじり塑性座屈の発生を回避し得る鋼製部材を提供すること。 - 特許庁
  • To provide a reinforcing tape which has good adhesion to the back surface of a constituting member of a leather article and improves the fixing properties to this constituting member and also improves the working efficiency by avoiding adhering to the fingers of the fixing worker.
    革製品の構成部材における裏面に対しては良好な接着性を有して、この構成部材への取付け性を向上する一方、取付け作業者の指への付着を回避して、作業効率を改善する補強テープを提供する。 - 特許庁
  • To provide an electric wire in a novel structure capable of immediately identifying its position in darkness when collapsed or broken into a sagging condition in suffering disaster and avoiding the occurrence of miserable contact and electric shock.
    この発明は、災害時等で倒壊、断線し、地上へ垂れ下がり状となってしまった電線に対し、暗闇の中でもその位置が直ちに確認でき、悲惨な接触、感電事故等を未然に回避可能とする新規な構造からなる電線を提供する。 - 特許庁
  • Thus, the display drive devices 331, 332, 333 and a lens drive device 207 of the image pickup device 32 are positioned away from each other with the display devices 202, 203 in between, thereby effectively avoiding electronic wave interference generated in both the drive devices.
    これにより、表示駆動デバイス331・332・333と撮像デバイス32のレンズ駆動デバイス207とが表示デバイス202、203を挟んだ遠い位置となって、双方の駆動デバイスが発生する電子波干渉を効果的に回避できる。 - 特許庁
  • To provide a receiving device and an antenna which can reduce deterioration in characteristic due to a human body more than before while avoiding the influence of a noise by being applied to, for example, a mobile phone capable of receiving a digital radio broadcast etc.
    本発明は、受信装置及びアンテナに関し、例えばディジタルラジオ放送等を受信可能な携帯電話に適用して、ノイズの影響を回避しつつ、従来に比して人体による特性の劣化を低減することができるようにする。 - 特許庁
  • To provide a false tree by kitting an artificial garden tree having sufficient strength avoiding break even if being weathered by wind and rain in the open air so as to easily assemble at home, and making the kit suitable for distribution and sellable at hardware store or by online shopping.
    屋外で風雨に晒されても破損する事の無い、十分な強度を有する人工の庭木を、自宅で簡単に組み立てる事が出来る様にキット化し、流通に適しするようにして、ホームセンターやネット通販等で販売可能にする。 - 特許庁
  • To achieve long life of a photoreceptor by suppressing image flow from occurring while avoiding large size and cost increase of a power supply device and further suppressing wear of a photoreceptor surface even in an image forming apparatus having a low speed mode.
    低速モードを有する画像形成装置においても、電源装置の大型化やコストアップを回避しつつ、画像流れが発生するのを抑制することができ、しかも、感光体表面の摩耗を抑制して、感光体の長寿命化を図る。 - 特許庁
  • In this remote controller for the toilet washing device, an element part for transmitting an operation instruction signal to the toilet washing device is disposed at a position avoiding the hand of the toilet user to input an operation instruction, to be held in front of an object detection sensor.
    トイレ用洗浄装置用のリモコン装置において、トイレ用洗浄装置への作動指示信号を発信する素子部を、トイレ使用者が作動指示を入力する目的で物体検知用センサーの前にかざした手を避ける位置に配置した。 - 特許庁
  • To enable high speed data communication using a single series of pseudo noise codes per user while avoiding too a large circuit scale, and also to enable a good bit error rate characteristic even when the received signal is amplified nonlinearly.
    回路規模を余り大きくすることなく、1ユーザ当り1つの擬似雑音符号系列を用いて、高速なデータ通信を行うことが可能で、さらに受信信号が非線形増幅された場合でも、良好なビット誤り率特性を持つこと。 - 特許庁
  • To manufacture a shaped body for an optical sheet having an embossed layer with a concave-convex pattern formed by a roll forming method continuously at a low cost by avoiding a transfer defect resulting from a joint of a flat mold.
    ロール成形法により凹凸パターンが形成されたエンボス層を有する光学シート用成形体を製造する場合に、平板状金型の継ぎ目部に起因する転写欠陥を回避し、低コストで連続的に光学シート用成形体を製造する。 - 特許庁
  • Since the common ink chamber 12b is made in a manifold plate 12Y while avoiding positions corresponding to the caps 81 and 85, the common ink chamber 12a corresponding to the caps 81 and 85 is formed to have a thick wall thus realizing a structure withstanding the capping pressure.
    共通インク室12bは、キャップ81、85と対応する位置を避けてマニホールドプレート12Yに凹設されるため、キャップ81、85と対応する共通インク室12aの壁が厚く形成され、キャッピング時の圧力に耐え得る構造となる。 - 特許庁
  • At the same time, vias are made through a second layer of dielectric material having a standard dielectric constant to reach the metal line so that silicon nitride caps 20a-20d exist on the metal line thus avoiding via poisoning.
    同時に、この方法では、誘電率が標準的である誘電材料の第2の層を通過して金属線に至るようにバイアを形成し、金属線上にシリコン窒化物キャップ20a〜20dを存在させることにより、バイア・ポイズニングを回避する。 - 特許庁
  • To provide a power failure detector and a game machine therewith, capable of avoiding destruction or malfunctions in a reset IC due to the input voltage of the reset IC into a voltage input terminal out of its specified range, if AC power voltage fluctuates.
    AC電源電圧が変動した場合にリセットICの電圧入力端子への入力電圧が、その規格範囲を外れ、リセットICの破壊または誤動作するのを回避する停電検出装置およびそれを使用する遊技機を提供すること。 - 特許庁
  • To prevent a communication failure from occurring by avoiding the allocation of an IP address being the same as an IP address of network equipment even when the network equipment to which the IP address is allocated manually by a manager is connected to a network.
    管理者により手動でIPアドレスが割り当てられたネットワーク機器がネットワークに接続されている場合でも、そのネットワーク機器のIPアドレスと同一のIPアドレスの割り当てを回避して、通信障害の発生を防止することができるようにする。 - 特許庁
  • To provide an image processing apparatus, an image processing system and an image processing program capable of easily avoiding or recovering a failure by outputting candidate information for changing a condition in performing image processing in accordance with a factor of the failure.
    障害の原因に応じて画像処理を実行する際の条件を変更する候補情報を出力し、障害を簡便に回避又は復旧することができる画像処理装置、画像処理システム及び画像処理プログラムを提供する。 - 特許庁
  • To provide a light distribution control system for a lighting device for a vehicle capable of securely avoiding that glare is given to an oncoming car and a preceding car and satisfactorily ensuring driver's visual field at all times by selecting a proper mode carefully during running of the vehicle.
    車両の走行中、きめ細かく適切なモードを選択して、対向車及び先行車にグレアを与えることを確実に回避するとともに運転者の視野を常に良好に確保する車両用灯具の配光制御システムを提供する。 - 特許庁
  • To provide a new and useful file management system capable of performing proper management of a file while avoiding complication to the utmost by imparting a file usable for a user or a secrecy degree of the file as a level value, and associating them.
    利用者の利用可能ファイルやファイルの機密度をレベル値として与え、これらを関連づけることによって、複雑化を極力回避しつつファイルの適切な管理が行えるようにした新規有用なファイル管理システム等を提供する。 - 特許庁
<前へ 1 2 .... 189 190 191 192 193 194 195 196 197 .... 250 251 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.