「reference」を含む例文一覧(50000)

<前へ 1 2 .... 881 882 883 884 885 886 887 888 889 .... 999 1000 次へ>
  • CPU 11 reads a first conversion expression program by S2 to convert the time series of detection temperature data into the time series of a practical oscillation frequency f" of a reference clock signal S2, by using the first conversion expression.
    CPU11は、CPU11は、S2で、第1換算式のプログラムを読み出して、この第1換算式を用いて検出温度データの時系列を基準クロック信号S2の実際の発振周波数f”の時系列に変換する。 - 特許庁
  • The write time of the signal line can be shortened, since the signal line is precharged on the basis of the reference voltage selected according to the bit string of the higher 3 bits of the digital pixel data before the signal line is written on the substrate.
    信号線の書き込みを行う前に、デジタル画素データの上位3ビットのビット列に応じて選択された基準電圧に基づいて信号線のプリチャージを行うため、信号線の書き込み時間を短縮することができる。 - 特許庁
  • To provide a novel aging board capable of supporting semiconductor lasers of various standards, having superior heat dissipation efficiencies during the testing time, and capable of obtaining an accurate test result, without producing variations in a reference level relative to a laser receiving unit.
    各種規格の半導体レーザに対応可能で、試験時の放熱効率にも優れ、レーザ受光ユニットに対する基準面にばらつきが生じることなく正確な試験結果が得られる新規なエージングボードを提供する。 - 特許庁
  • When the developing unit is loaded, drive information as information about a toner composition change is obtained from a memory installed in the developing unit, and the reference current value is corrected using the idle-drive current value I_E1 and the drive information.
    そして、現像器が装着されたときに、現像器のメモリからトナーの組成の変更についての情報である駆動情報を取得し、空駆動電流値I_E1と駆動情報とを用いて、基準電流値を補正する。 - 特許庁
  • A recognition part 107 compares the feature quantity extracted by the feature quantity extraction part 106 with a reference feature quantity registered in a registration information holding part 108 to recognize the face image of the object person 100.
    認識部107は、特徴量抽出部106で抽出された特徴量を登録情報保持部108に登録された基準の特徴量と照合することにより認識対象者100の顔画像を認識する。 - 特許庁
  • In this case, the temperature of the cooling water at the cooling water exit is made a reference, and the temperature ΔT_out of the cooling water at the cooling water entrance can be determined so that the discharge water quantity from the fuel cell may be a prescribed quantity.
    この場合、冷却水出口における当該冷却水の温度を基準とし、燃料電池からの排水量が所定量となるように冷却水入口における当該冷却水の温度ΔT_outを決定することができる。 - 特許庁
  • The imaging apparatus characteristic correction data, the photographing information data and the scene discrimination index data are attached to a file header of the scene reference raw data as tag information, and the attached data file is recorded and stored in a recording medium of a storage device 16.
    シーン参照生データのファイルヘッダに撮像装置特性補正データ、撮影情報データ及びシーン判別指標データがタグ情報として添付され、添付済みのデータファイルが記憶デバイス16の記録メディアに記録、保存される。 - 特許庁
  • The response of a speed control operation means 1 is temporarily made high based on a deviation ΔV between the speed V of a motor 10 driving a car and its reference value V0 by an auxiliary speed control means 2 when an elevator starts running.
    エレベータの走行開始時に補助速度制御手段2により、かごを駆動するモータ10の速度Vとその速度基準値V0との速度偏差ΔVに基づいて、一時的に速度制御演算手段1の応答を高める。 - 特許庁
  • The operation determination part 17 outputs display change information of expanding or contracting, along a slide direction, the display area of the image concerned in a start position of the indication portion, when the slide range is the reference slide range or more.
    操作判別部17は、当該スライド範囲がその基準スライド範囲以上のとき、その指示箇所のスタート位置に係るリスト画像の表示エリアをスライド方向に拡張又は縮小表示変更情報を出力する。 - 特許庁
  • A distance G2 from the external terminal electrode 21 nearest to an end face 13a to the end face 13a is measured, if the measured distance G2 does not satisfy a predetermined reference value, the ceramic element body is screened and removed as a defective product.
    端面13aに最も近い外部端子電極21から端面13aまでの距離G2を測定し、測定された距離G2が所定の基準値を満たさない場合、そのセラミック素体を不良品として選別除去する。 - 特許庁
  • In an analog-to-digital conversion apparatus 100 of the present invention, an analog-to-digital converter (ADC) 10 is configured as a parallel type ADC wherein a plurality of comparators each for comparing potentials of an analog input signal and a reference signal are connected in parallel.
    本発明のアナログデジタル変換装置100において、アナログデジタル変換器10は、アナログ入力信号とリファレンス信号の電位を比較する比較器を複数個並列に接続した並列型のADCとして構成される。 - 特許庁
  • The difference between the sensor resistance value Rb in reference gas measurement and the sensor resistance value Rs in sample gas measurement depends on the smell component to be measured, and the influence of the background smell can be thus removed to measure a fine smell.
    参照ガス測定時のセンサ抵抗値Rbとサンプルガス測定時のセンサ抵抗値Rsの差は、測定対象のにおい成分によるものであり、バックグランドのにおいの影響を除去して、微妙なにおいを測定することができる。 - 特許庁
  • Based on the load on the car 13 detected by a load detection part 26, the reference pulse is corrected and stored in a position storage part 24 with the amount of the displacement of the car produced by the load on the car taken into account.
    その際、荷重検出部26にて検出された乗りかご13の積載荷重に基づいて、その積載荷重によって生じるかご位置のずれ分を考慮して基準パルスを補正してかご位置記憶部24に記憶する。 - 特許庁
  • Further, a second path to the script reference is supplied, inquiries 43 and 44 on the second path activate a script operation, an inquired value is supplied and the value is distributed 34 and 36 to an inquired network manager 12.
    さらに、スクリプト・リファレンスへの第2のパスが与えられ、この第2のパス上の照会43、44はスクリプト・オペレーションを活性化させ、照会された値を与え、照会したネットワーク・マネージャ12にその値を配信34、36する。 - 特許庁
  • A pixel interpolation unit 105 refers to the motion vector detected by the motion detection unit 104, and generates the chrominance data of the pixel to be interpolated, from the chrominance data in the reference range generated by the chrominance delay unit 103.
    画素補間部105は、動き検出部104によって検出された動きベクトルを参照して、色差遅延部103によって生成された参照範囲の色差データから補間対象の画素の色差データを生成する。 - 特許庁
  • A relation between a 2nd light quantity level P2 for recording and a reference voltage level Vref2 of a comparison means for the 2nd light quantity level P2 is beforehand determined at the manufacturing process not only for the high power range but also for the low power range.
    記録用の第2の光量レベルP2とこの第2の光量レベルP2用の比較手段の基準電圧レベルVref2との関係について製造工程で予め高パワー範囲だけでなく低パワー範囲についても求めておく。 - 特許庁
  • In a digital/analog converter, a fuse circuit including six fuses 12a-12f for generating current value adjusting control signals Sa-Sf, is provided in a specific reference unit current cell 10R among a plurality of unit current cells in a unit current cell group.
    単位電流セル群の複数の単位電流セルの内で特定の基準単位電流セル10Rに、電流値調整用の制御信号Sa〜Sfを生成する6個のヒューズ12a〜12を有するヒューズ回路を設ける。 - 特許庁
  • Attention is paid to a secondary code series and an alternative code series where the phase is shifted with a primary code series as a reference, and the phase shift is achieved by a matrix operation in matrix operation sections 120a, 120b.
    セカンダリーコード系列やオルタナティブコード系列は、プライマリコード系列を基準として、その位相をシフトしたものであることに着目し、その位相シフトを、行列演算部120a,120bにおける行列演算にて実現する。 - 特許庁
  • A voltage drop comparator 100 is provided for outputting an interrupt signal when a feedback voltage Vd of an output voltage of a DC-DC converter is lower than a voltage drop threshold (referred to as "Vref-ΔV") set lower than a reference voltage Vref.
    DC−DCコンバータの出力電圧の帰還電圧Vdが、基準電圧Vrefより低く設定された電圧低下しきい値(「Vref−ΔV」と表記)より低い場合に割込信号を出力する電圧低下比較器100を設ける。 - 特許庁
  • To provide a position detecting system capable of detecting a position of a natural ground excavator by measuring the amount of displacement of the central axis of the natural ground excavator with respect to a reference line set in the existing tunnel, and the natural ground excavator equipped with the system.
    既設トンネル内に設定された基準線に対する地山掘削機の中心軸のずれ量を測定して、地山掘削機の位置を検出可能な位置検出システム及びそのシステムを備えた地山掘削機を提供する。 - 特許庁
  • The relevant incident reference beam (RL) has its traveling direction changed into a reverse direction by the hologram element (40) regardless of its incident angle, follows the same optical path as the incoming path, and is applied again to the hologram recording medium (30).
    当該入射した参照光RLは、ホログラム素子40によって、入射角度に関わらずその進行方向を逆向きに変えられ、往路と同一の光路を通ってホログラム記録媒体30に再び照射される。 - 特許庁
  • The offset value generator 4 outputs an offset adjustment signal S4 indicating an offset adjustment value OF obtained by reference to an offset information storage register 5 based upon a combination of the bits b0 and b1 after the bits b0 and b1 are determined.
    オフセット値生成部4は、ビットb0,b1の決定後はビットb0,b1の組合せに基づき、オフセット情報格納レジスタ5を参照して得られるオフセット調整値OFを指示するオフセット調整信号S4を出力する。 - 特許庁
  • A translation determination part 114 gives a translation to an expression which appears in a translation object document of the first language in reference to second language expression extraction data extracted by the second language expression extraction part 150.
    訳語決定部114は、第1言語の翻訳対象文書に出現する表現に対して、第2言語表現抽出部150により抽出された第2言語表現抽出データ140を参照して訳語を付与する。 - 特許庁
  • An AV apparatus previously makes a connection table indicative of connection information with a connection partner before the occurrence of bus reset (S12) and executes processing for restoring connection (S28) with reference to that connection table (S22) after the occurrence of bus reset.
    AV機器は、バスリセット発生前の接続相手との接続情報を示す接続テーブルを予め作成しておき(S12)、バスリセットの発生後に、この接続テーブルを参照して(S22)、コネクションの復旧処理を実行する(S28)。 - 特許庁
  • To appropriately perform an image processing using an OB (optical black region) signal in a poststage as a reference without breaking by performing signal correction of a flaw defect in an optical black region in an image pickup section carefully and finely.
    本発明は、撮像部のオプチカルブラック領域のキズ欠陥を丁寧かつ綺麗に信号補正することにより、後段におけるOB信号を基準にした画像処理を破綻なく、かつ適切に実施できるようにすることを目的とする。 - 特許庁
  • To reduce detection of a deviation of a reference frequency by either one of radio systems or effect of AFC control on the other radio system in a radio equipment such as a portable telephone set loaded with a plurality of radio systems sharing an oscillator.
    発振子を共用する複数の無線システムが搭載された携帯電話機等の無線機に関し、何れかの無線システムによる基準周波数のずれの検出や、AFC制御に対する他の無線システムへの影響を軽減する。 - 特許庁
  • The interference of the object light and the reference light is caused on the photosensitive material at the incident angles calculated in S11 to 13, by which the Lippmann hologram is recorded (S15).
    ステップS15において、ステップS14において算出された物体光および参照光が、ステップS11〜S13において算出された入射角で感光材料上で干渉されて、感光材料にリップマン型ホログラムが記録される。 - 特許庁
  • Here the update means performs update of the weighted average by predetermined times after the shading data is held based on the image data of the reference whiteboard read by preceding to reading of document image in the storage means 505 as an initial value.
    ここで更新手段は,記憶手段505に初期値として原稿画像の読み取りに先行して読み取られる基準白板の画像データに基づくシェーディングデータが保持された後,所定回数だけ加重平均による更新を行う。 - 特許庁
  • A user terminal 110 executes a retrieval conditions input tool 111 on the basis of a sample video stored beforehand and generates a first media feature value (a correct answer feature value) 121 to be a reference for retrieving the media recognition site.
    ユーザ端末110は、予め記憶されたサンプル映像をもとにして、検索条件入力ツール111を実行し、メディア認識サイトを検索する基準となる第一のメディア特徴量(正解特徴量)121を作成する。 - 特許庁
  • A particle generation number/size report section 106 compares the maximum luminance value detected by the intra-area maximum luminance value detection section 102 with the reference value set by an input section 107 and determines the relative size of particles.
    パーティクル発生数/大きさ通知部106は、領域内最大輝度値検出部102が検出した最大輝度値を、入力部107によって設定された基準値と比較し、粒子の相対的な大きさを求める。 - 特許庁
  • A photograph print system 1 performs the setting of the center coordinates that are the reference position of various kinds of correction such as peripheral light intensity correction, chromatic aberration correction or distortion correction by use of an area setting part 33 and a center coordinate setting part 34.
    写真プリントシステム1では、周辺光量補正、色収差補正、歪み補正等の各種補正の基準位置となる中心座標の設定を、領域設定部33と中心座標設定部34を用いて行う。 - 特許庁
  • To provide a handing tool and a method of a chip-type electronic component which has positioning reference holes hardly abraded, accurately positions the chip-type electronic component, and also positions it by an image processing.
    位置決め基準孔が摩耗しにくく、チップ型電子部品の位置決めを正確に行うことができ、かつ、画像処理による位置決めも可能であるチップ型電子部品の取扱い治具やチップ型電子部品の取扱い方法などを提供する。 - 特許庁
  • A use difference determination section 109 compares a determination reference stored in a user definition information storage section 105 with information delivered from the reagent dispensation mechanism count calculation section 108 and displays a determination result on a display section 111.
    使用差判定部109は、ユーザ定義情報記憶部105に記憶された判断基準と、試薬分注機構回数算出部108から受け渡された情報を比較して、判定結果を、表示部111に表示する。 - 特許庁
  • A read-out unit reads out the reference information associated with the telephone number of the calling terminal from the calling user information memory, and reads out the address associated with the telephone number of the called terminal from the called user information memory.
    読出部は、発信端末の電話番号に関連付けられた参照情報を発信ユーザ情報記憶部から読み出し、着信端末の電話番号に関連付けられたアドレスを着信ユーザ情報記憶部から読み出す。 - 特許庁
  • To provide technique capable of maximizing storage efficiency of a system with registering data, which is located at a first storage location, for migration administration and with migrating a data stream, which is suitable for an other storage location, according to a predetermined reference.
    第1ストレージ・ロケーションに位置するデータを移動監督のために登録し、既定の基準にしたがって、別のストレージ・ロケーションに適したデータ・ストリームを移動させ、システムのストレージ効率を最大限高める技法を提供する。 - 特許庁
  • Namely, a reference signal for stabilizing an FMCW radar transmission signal and a carrier wave signal for road traffic communication are used in common using a carrier wave signal of the carrier wave signal generation means 13 for road traffic communication.
    つまり、FMCWレーダ送信信号の安定化のための基準信号と道路交通通信の搬送波信号とを、道路交通通信の搬送波信号発生手段13の搬送波信号を用いて共有化するようにする。 - 特許庁
  • The reference voltage V4 limits the contraction width of a first comparison signal D to an interval T3, and since the end and start of driving currents IL1, IL2 can be prevented for overlapping, drive efficiency of motor can be prevented from lowering.
    基準電圧V4は第1比較信号Dの縮小幅を期間T3に制限するものであり、駆動電流IL1,IL2の終端及び始端の重なりを防止でき、モータの駆動効率の低下を防止できる。 - 特許庁
  • For example, level values a to h of peripheral picture elements and a level value o of a target picture element are respectively inputted in eight comparators 11, and when the absolute value of the difference between the level values is smaller than a reference level θ, a value of '1' is outputted.
    例えば8個の比較器11にそれぞれ周囲画素のレベル値a〜hと注目画素のレベル値oとが入力され、それぞれのレベル値の差の絶対値が基準レベルθの値より小さいとき値“1”が出力される。 - 特許庁
  • A decrease amount of an actual storage capacity to the reference storage capacity of the NOx storage reduction catalyst 27 is obtained, and when the decrease amount is larger than an allowable amount, it is determined that the SOx capture amount has exceeded the upper limit SOx amount.
    NOx吸蔵還元触媒27の基準吸蔵容量に対する実際の吸蔵容量の減少量を求め、減少量が許容量よりも大きいときにSOx捕獲量が上限SOx量を越えたと判断する。 - 特許庁
  • Signal point particularizing sections 108, 208 particularize the signal point of the received signal projected to a point apart from an extension of a region for surrounding all reference points on the complex plane according to the multi-value modulation system by a prescribed distance.
    信号点特定部108,208は、多値変調方式に従う複素平面における全ての基準点を囲む領域の外延から所定距離以上の隔てられた箇所に投影された受信信号の信号点を特定する。 - 特許庁
  • The switching regulator 1X is provided with a zener diode 3, a power transistor 4, a predriver 5, a comparator 6, an oscillator (OSC) 7, a PWM controller 8, an output voltage adjusting internal resistor 9, an amplifier 11, and a reference voltage generating circuit 10.
    スイッチングレギュレータ1Xには、ツエナーダイオード3、パワートランジスタ4、プリドライバー5、コンパレータ6、発振器(OSC)7、PWMコントロール8、出力電圧調整内部抵抗9、アンプ11、基準電圧発生回路10が設けられている。 - 特許庁
  • A server associates information about the customer associated by the coupon ID in reference to the prospect customer DB, with the information about the customer to be registered in the customer DB when registering the personal information of the customer into the customer DB.
    サーバは、顧客DBに顧客の個人情報を登録する際、プロスペクト顧客DBを参照してクーポンIDによって関連付けられる顧客の情報と、顧客DBに登録される顧客の情報を関連付ける。 - 特許庁
  • To provide an image input/output device for comparing an object such as an object to be measured obtained from image pickup data with reference information related to the object, and for projecting information related to the comparison result to the object.
    撮像データから得られた被測定物などの被写体とその被写体に関する参照情報とを比較し、その比較結果に関連する情報を被写体に投影することができる画像入出力装置を提供すること。 - 特許庁
  • The detection means detects, based on the positional information from the servo region, the presence or absence of a shift recording which means recording by shifting from a reference in a radial direction on the first track in parallel with recording of the information on the first track.
    検出手段は、第1トラックへの情報の記録と並行して、第1トラック上での半径方向の基準に対してシフトして記録するシフト記録の有無をサーボ領域からの位置情報に基づいて検出する。 - 特許庁
  • During the diagnostic operation in case of earthquake after control operation in case of earthquake, when a measurement value by the data measurement part 12 is deviated from a first detection range set based on the abnormality reference values, it is determined that an abnormality occurs.
    そして、地震時管制運転後の地震時診断運転において、データ計測部12による測定値が、異常基準値を基準として設定された第1検出範囲から外れた場合に異常有りを判定する。 - 特許庁
  • To provide a recorder in which recording operation can be started in a short time without performing an operation for acquiring the reference position of a carriage even when a power supply, having turned off during recording operation, makes a transition from off state to on state.
    記録動作中にオフした電源がオフ状態からオン状態へと遷移した場合にも、キャリッジの基準位置取得動作を行うことなく、短時間で記録動作を開始することができる記録装置の提供を目的とする。 - 特許庁
  • And luciferases genes are transfected to each cell simultaneously with a DNA originated from HIV, a rough protein liquid extracted from each cell with the luciferases genes as a reference is diluted, and the amount of generation of p24 is measured in each weak diluted solution.
    また、ルシフェラーゼ遺伝子をHIV由来DNAと同時に各細胞にトランスフェクションさせ、ルシフェラーゼ活性を基準に各細胞から抽出した粗タンパク液を希釈し、各希釈液においてp24の生成量を測定する。 - 特許庁
  • A lock spring 34 in the reference block 2 moves the circular plug 15 down via the output member 21 and pressure oil in a release chamber 35 moves the circular plug 15 up via the output member 21.
    上記の基準ブロック2内のロックバネ34が上記の出力部材21を介して上記の環状プラグ15を下降させ、リリース室35の圧油が上記の出力部材21を介して上記の環状プラグ15を上昇させる。 - 特許庁
  • Also, the locus extracting means 7 extracts the locus of the movement of the finger of the operator by extracting an area including the reference point set inside his or her finger in the picture whose all pixel values are present within a specific range.
    また、軌跡抽出手段7は、画像中の手指の内側に設定された基準点を含み且つ全ての画素の値が規定範囲内にある領域を抽出することによって手指の動きの軌跡を抽出する。 - 特許庁
  • In the confirmation operation, the image reader 100 lights the original lighting lamp 109 to read a reference white board, reads image data stored in a memory of a shading correction circuit 104 and obtains its maximum value for each RGB (steps S701, S702).
    本動作においては、原稿照明ランプ109を点灯して基準白板を読み取り、シェーディング補正回路104のメモリに格納された画像データを読み出し、その最大値をRGB毎に求める(ステップS701,S702)。 - 特許庁
<前へ 1 2 .... 881 882 883 884 885 886 887 888 889 .... 999 1000 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.