「Is Using」を含む例文一覧(49967)

<前へ 1 2 .... 520 521 522 523 524 525 526 527 528 .... 999 1000 次へ>
  • A thermistor 31 is disposed on the surface of the coil 22 located on the inner peripheral side of a stator by using a temperature detecting element holder 30.
    ステータの内周側に位置するコイル22の表面上に温度検出素子ホルダ30を用いてサーミスタ31が配設されている。 - 特許庁
  • The air containing layer is constructed using non-woven fabrics 14, 15 cut in nearly the same width as the width of the transmission path of the cable body 10.
    空気含有層は、ケーブル本体10の伝送路幅と略同幅に切断された不織布14,15を用いて構成されている。 - 特許庁
  • This is a solar cell power source that has power supply equipment, which generates power by sunshine using a solar cell array, wherein electricity is stored into the solar cell array and a solar cell capacitor-binding module array mounted there when the sun shines, and the electricity is discharged when there is no sunshine.
    日照により太陽電池アレイを用いて発電する電源装置を備えた太陽電池電源であって、太陽電池アレイと、そこに搭載された太陽電池セル・キャパシタ結合モジュールアレイに日照時、蓄電し日陰時に放電する。 - 特許庁
  • Using a rectangular ultrasonic vibrator 2, when the wavelength of underwater sound wave is defined as λ, the row direction is arranged at an interval of λ; the column direction is arranged at an interval of λ/2; and the received wave signal of twin beams is separated and detected by a FFT processing circuit 8.
    長方形の超音波振動子2を用いて、水中音波の波長をλとする時、行方向をλ間隔で配列し、また列方向をλ/2間隔で配列し、ツインビームの受波信号をFFT処理回路8で分離検出する。 - 特許庁
  • The resist 2 is exposed by using a gray scale mask 3 for determining a main shape which is designed to obtain a target shape of the resist 2 when characteristics of the resist used such as sensitivity characteristics is an average, and the resist 2 is developed (c).
    そして、使用するレジストの感度特性等の特性が平均値である場合に、目的とするレジスト2の形状が得られるように設計された主形状決定グレースケールマスク3を用いてレジスト2を感光させ、レジスト2を現像する(c)。 - 特許庁
  • First decision deciding whether the apparatus becomes an agravic state or not is performed as determination processing in which the apparatus is dropped or not, and second decision deciding whether the apparatus is a free fall state or not is performed using acceleration history information already stored in a storage part.
    装置が落下しているか否かの判定処理として、装置が無重力状態になったか否かを判断する第1判断と、記憶部に格納済みの加速度履歴情報を用いて、自由落下状態であるか否かの第2判断を行う。 - 特許庁
  • When the content data is decoded, whether or not a permission condition indicating that decoding of the content data is permitted is established is judged using a scan result of a data print sheet and identification information read from a data storage part of an identification certificate.
    コンテンツデータを復号するときに、データプリントシートのスキャン結果と、識別証のデータ記憶部から読み出された識別情報とを用いて、コンテンツデータの復号が許可されていることを示す許可条件が成立するか否かを判定する。 - 特許庁
  • When the compression part 2 is driven by the traveling engine 8 and the motor 3 is rotated by power from the traveling engine 8, a generated voltage by the motor is detected, and the failure of the motor is diagnosed by using the detected generated voltage.
    圧縮部2が走行用エンジン8によって駆動され、この走行用エンジン8からの動力によってモータ3が回転されている場合に、該モータの発電電圧を検出し、検出された発電電圧を利用してモータの故障を診断する。 - 特許庁
  • When the operation detection signal in response to the operation of the start lever or the like is outputted within the predetermined limit time from the point of time at which the feed detection signal is outputted, it is determined that a fraudulent action using a fraudulent implement or the like is conducted.
    投入検知信号が出力された時点から所定の制限時間以内に、スタートレバーなどの操作に応答した操作検知信号が出力されたときに、不正器具を使用するなどした不正行為が行われたと判定される。 - 特許庁
  • In the case that the value I of a current flowing in a circuit is kept constant by using a current path controlling circuit C, transconductance (gain) is decreased or increased when scale W/L of the transistor is decreased or increased, and IIP3 is increased or decreased.
    回路に流れる電流値Iを電流経路制御回路Cで一定に保つことにより、トランジスタの大きさW/Lが縮小または増大すると、トランスコンダクタンス(利得)が低下または上昇し、IIP3が増大または減少する。 - 特許庁
  • This epoxy resin composition is provided by using an aromatic amine resin expressed by formula (1) [wherein, R is H or the like; and (n) is a mean value and is 1<n≤5] as a curing agent and containing the epoxy resin of a phenol-aralkyl resin type in its components.
    下記式(1)(式中、Rは水素原子等を、nは平均値であり1<n≦5をそれぞれ表す。)で表される芳香族アミン樹脂を硬化剤とし、フェノール・アラルキル樹脂型のエポキシ樹脂を成分中に含有するエポキシ樹脂組成物。 - 特許庁
  • Namely, the rotating angle of the source image is accurately detected by using a statistic character that the mean value of the detection error, which is included when the rotating angle of the arbitrarily rotated object pattern is detected, is converged to a fixed value including '0'.
    即ち、任意に回転させた対象パターンの回転角度を検出した時に含まれる検出誤差の平均値が、0を含む一定値に収束するという統計的性質を用いて、原画像の回転角度を精度良く検出する。 - 特許庁
  • Thus, when the second casing is moved by sliding, the second operating unit is exposed and when the second casing is moved by rotating, the first operating unit is exposed, thereby using the operating unit easy to use in accordance with a direction of the display means.
    これにより、第2の筐体をスライド移動させると第2の操作部が露出され、第2の筐体を回転移動させると第1の操作部が露出され、表示手段の向きに対応した使いやすい操作部を使用することができる。 - 特許庁
  • Maximum intensity projection is performed about a diffusion emphasis image which is taken by using a nuclear-magnetic-resonance imaging device, and the obtained image is displayed in white to provide an image detection method which is effective for diagnosis of tumor.
    核磁気共鳴イメージング装置を用いて撮像された拡散強調画像について最大値投影法を行い、得られた画像を白黒反転させて画像を形成することにより、腫瘍の診断に有効な画像検出方法を提供する。 - 特許庁
  • At the oxidation step, water is injected into the reaction tube 11 containing the iron material 13, the gross flow rate of the generated hydrogen gas is read by using a gas mass flowmeter 28 and the oxidation step is changed over to the reduction step before water is injected excessively.
    酸化工程においては、鉄材13を含有する反応管11に水を注入し、ガスマスフローメータ28により発生する水素ガスの総流量を読み取り、水分が過剰に投入される手前で還元環境に切り替える。 - 特許庁
  • Further, the plurality of light emitting diodes 10 to 12 independently emit light without using a diffusion member which is used in conventional cases; the loss of light caused by the diffusion member is eliminated and unnecessary light is not emitted; thus the light emission efficiency is improved.
    しかも、従来例のように拡散部材を使わず且つ複数の発光ダイオード10〜12を各別に発光させるから、拡散部材による光の損失がなくなるとともに無駄な光が放射されないことで発光効率を高めることができる。 - 特許庁
  • When the unwrapped schedule is analyzed and whether there is any performable optimization schedule or not is judged, followed by the schedule optimization, the controller analyzes again using all the locked optimized value except one or more work time that is targeted in the maximum period.
    アンラップされたスケジュールが分析され、最適スケジュールが可能であるかを判定し、スケジュールが最適化されると、最大期間で目標とされる1又は複数の作業時間を除いて、ロックされた総ての最適化値で再度分析する。 - 特許庁
  • When a prescribed application is in an active state and there is an entry to that application, for example, retrieving processing is interrupted and while using the network line released by that interruption, a generated action is processed.
    検索処理は、例えば、所定のアプリケーションがアクティブな状態になったとき、そのアプリケーションに対して入力があったときなどに、中断され、その中断により開放されたネットワーク回線を用いて、発生したアクションに対する処理が行われる。 - 特許庁
  • Finally, an UV resin is sealed in the hollow section 406B by using a capillary phenomenon; and when it is successively subjected to ultraviolet irradiation, the core 406B' is solidified; and the optical waveguide 400 having the cladding section 406A and the core 406B' is obtained (Fig.4(f)).
    最後に、中空部406Bに毛管現象によりUV樹脂を封入し、引き続き紫外線照射を行えばコア部406B’が固化され、クラッド部406A及びコア部406B’を有する光導波路400が得られる(図4(f))。 - 特許庁
  • A statistical model which is generated by using text with a label as training data and is constituted so that probability data which shows a probability of applied optional text belonging to a predetermined set is outputted is taken as a sorting model.
    ラベルありテキストが訓練データとして用いられて生成された統計モデルであって、なおかつ、適用された任意のテキストが所定の集合に属する確率を表す確率データを出力するように構成されたものを分類モデルとする。 - 特許庁
  • More accurate pruning determination is performed by using the antecedents such as attributes other than accumulated weight of the hypothesis, for example, which node is reached, or which arc is passed, and the search error is less likely to occur than before.
    仮説の累積重み以外の属性、例えばどのノードに到達したか、どのアークを通ったか等の素性を用いることでより正確な枝刈判定を行うことができ、探索誤りの危険性を従来よりも小さくすることができる。 - 特許庁
  • The position of a movable stage is measured by the position measuring system, the movable stage is driven using information on measurement, and a measuring mark consisting of the out-of-movable-stage periodic pattern is detected by a detector which is partially disposed on the movable stage.
    可動ステージの位置を位置計測系を用いて計測し、その計測情報を用いて可動ステージを駆動するとともに、可動ステージ外の周期パターンから成る計測用マークを可動ステージに一部が配置された検出器を用いて検出する。 - 特許庁
  • To provide a method by which a silane coupling agent is separated from a silane coupling agent-containing solution without using considerable energy and without generating waste materials, and then the separated silane coupling agent is recovered and recycled and a solvent from which the silane coupling agent is removed, is recovered.
    多大なエネルギーを使用せず、かつ廃棄物を発生させることなく、シランカップリング剤を含む溶液からシランカップリング剤を分離し、回収して再生利用するとともに、シランカップリング剤が除去された溶媒を回収する方法を提供する。 - 特許庁
  • When the time domain encoding method is selected, the sound signal of each frame is encoded with vector quantization by using a first code book without converting a time domain signal, and signal quantization code index which is a result of the encoding is output.
    時間領域符号化方法が選択された場合には、フレームごとの音響信号を時間領域信号のまま第一コードブックを用いてベクトル量子化により符号化して、その符号化結果である信号量子化符号インデックスを出力する。 - 特許庁
  • During processing according to the application software, a decision is made whether a control processing using that control data is executed or not and if it is not executed, the control processing is not executed even if the control data has been handed over already.
    そして、アプリケーションソフトに従う処理の中で、当該制御データを用いた制御処理を実行するか否かが判断され、実行しないと判断した場合には、制御データが既に渡されているにもかかわらず、当該制御処理を実行しない。 - 特許庁
  • When the area of the profile is large or d_T-d_w is in the range near 0, a high-frequency component of a reconstitution function is adjusted to be controlled (step S9), and back projection is performed using the adjusted reconstitution function.
    プロファイル面積Sが大きい場合、または、d_T−d_wが0に近い範囲内にあるときは、再構成関数の高周波成分を抑制するように調整を行い(ステップS9)、調整後の再構成関数を用いてバックプロジェクションを実行する。 - 特許庁
  • If a nonconformity exceeding a predetermined threshold is obtained in this totalizing process, the totalizing process is ended; at the scanning position where the totalizing process has ended, the threshold is renewed using the nonconformity if the nonconformity is below the threshold.
    この累計処理において、所定のしきい値を越える不一致度が得られると累計処理は打ち切られるが、累計処理が終了した走査位置では、不一致度が前記しきい値を下回る場合にその不一致度によりしきい値が更新される。 - 特許庁
  • Certification text which is difficult to be forged and permits confirmation of correctness from only the public information is attached to the ciphertext and when the illicit ciphertext is inputted to the decryption oracle, the illicit ciphertext is rejected without using the secret information.
    暗号文に対して、偽造が困難であり、かつ、公開情報のみから正当性を確認できる証明文を添付し、不正な暗号文が復号化オラクルに入力された場合、秘密情報を用いることなく不正な暗号文を拒絶する。 - 特許庁
  • When the software is unregistered, when it is within the access code life ACL, a registration processing is performed on user authentication using the access code AC and in this case, a randomly generated check code CK is recorded in the license file and two register files.
    ソフトウェアが未登録の場合、アクセスコード寿命ACL内であれば、アクセスコードACを用いたユーザ認証のうえ登録処理が行われ、その際、ランダムに発生したチェックコードCKがライセンスファイルおよび2つのレジスターファイルに記録される。 - 特許庁
  • (b) When a photoresist film 20 is formed on the reflection metal film 11 and is subjected to resist development using a specified pattern, the exposed part of the photoresist 20 is removed with TMAH and the reflection metal film 11 under the removed part is simultaneously etched off.
    (b)反射金属膜11の上にフォトレジスト20を形成し、所定のパターンでレジストの現像を行う際に、TMAHによりフォトレジスト20の露光部分を除去するとともに、その除去部分の下側の反射金属膜11をエッチングする。 - 特許庁
  • A local oscillation amplifier 1 is constituted of a field effect transistor 4, its source is grounded at high frequency by using a capacitor 20, and its gate is connected with a resistor 7, whose one end is grounded and a resistor 8.
    局部発振増幅器1は電界効果型トランジスタ4で構成され、ソースは容量20で高周波的に接地され、ゲートは一端が接地された抵抗7と抵抗8が接続され、抵抗8の他端は電源供給端子19に接続される。 - 特許庁
  • When the quantization section is determined by a quantization determining section 112 but the number of the truncation required for the determination is not computed by a truncation-number gaining section 113, the number of the truncation is estimated, and the quantization section is determined by using the number of the truncation.
    その量子化区間は量子化決定部112で決定されるが、その決定に必要なトランケート数がトランケート数取得部113で算出されない場合には、トランケート数が推定され、それを用いて量子化区間が決定される。 - 特許庁
  • An ingot is cast from a molten metal melted by a cold crucible induction melting process, using the ingot, a consumable electrode is formed, thereafter, the consumable electrode is remelted by a vacuum arc remelting process, and a large-sized ingot is cast from the molten metal.
    コールドクルーシブル誘導溶解法により溶解した溶湯からインゴットを鋳造し、このインゴットを用いて消耗電極を形成した後、この消耗電極を真空アーク再溶解法により再溶解し、その溶湯から大型のインゴットを鋳造した。 - 特許庁
  • A culture system which is characterized in that at least a photocatalytic function material composed of photosemiconductor powder is arranged in a culture system for culturing fishes, shellfishes, etc., (for example a purification unit using the photocatalytic function material is incorporated into the culture system) is utilized.
    魚、貝などを養殖するための養殖システム中に、少なくとも、光半導体粉末からなる光触媒機能体を設置する(例えば光触媒機能体を利用する浄化ユニットが組み込む)ことを特徴とする養殖システムを利用する。 - 特許庁
  • The coil 21 is wound by the winding frame of the magnet wire 22, is removed from the winding frame after a winding process is completed, and is formed and treated by using epoxy varnish for sealing the mutual parts between the magnet wires 22, thus forming the coil 21 as a forming coil without bobbin.
    コイル21は、 マグネットワイヤ22の巻枠を用いての巻回. 巻回工程の完了後に巻枠から取外し,エポキシワニスを用いてマグネットワイヤ22の相互間を固着しての成形処理.により、ボビンレスの成形コイルとして形成される。 - 特許庁
  • A laser beam is radiated to a ceramic substrate using a CO_2 laser of an RF (Radio Frequency) excitation system under laser oscillation conditions that the power density is 15 to 60 W, pulse period is 1,000 to 4,000 μs, and pulse DUTY is 5 to 20%.
    RF励起方式のCO_2レーザーを用いるとともに、レーザー発振条件を、パワー密度15〜60W、パルス周期1000μsec〜4000μsec、パルスDUTY5%〜20%としてセラミック基板にレーザー光を照射する。 - 特許庁
  • To provide a cement composition which is obtained by using waste glass powder of which the effective utilization is not found out and prevents the conversion that is the defect of a calcium aluminate-based compound and also prevents the alkali silica reaction that is the defect of the waste glass.
    有効利用法が見出されていない廃ガラス粉末を利用し、カルシウムアルミネート系化合物の欠点であるコンバージョンを防止すると共に、廃ガラスの欠点であるアルカリシリカ反応の防止をもなし得るセメント組成物を提供する。 - 特許庁
  • This image forming method is characterized in that a latent image formed on a cylindrical electrophotographic photoreceptor whose cylindricity is 5 to 40 μm, is developed with a developer using the toner set so that the coefficient of variation of the shape coefficient of toner particle is ≤16%.
    円筒度5〜40μmの円筒状電子写真感光体上に形成された潜像をトナー粒子の形状係数の変動係数が16%以下であるトナーを用いた現像剤により現像することを特徴とする画像形成方法。 - 特許庁
  • A partial image in the image recognizing step is processed as coordinates information, and a partial image is extracted by using the coordinates information from entire ledge sheet image of higher gradation which is previously acquired in the client and is then transmitted over the network.
    本発明は、画像認識処理での部分イメージを座標情報として扱い、クライアントにおいて予め取得しておいた高階調の帳票全体イメージから座標情報を用いて部分イメージを切出してネットワークを介して送信する。 - 特許庁
  • A contact hole is formed in an interlayer film 80, a heat treatment is performed in a vacuum, at 1,000°C for one minute by using the RTA apparatus, the exposed surface of an n^+ type source region 40 is cleaned, and a source electrode 90 is formed inside the contact hole.
    層間膜80にコンタクトホールを形成し、RTA装置を用いて、1000℃、1分間の熱処理を真空中で行い、n^+型ソース領域40の露出された表面を清浄化し、コンタクトホール内にソース電極90を形成する。 - 特許庁
  • The first holder 31 is tilted by a prescribed quantity using a member for adjusting, after the adjustment of a correction quantity of astigmatism, the second holder 33 is rotated by the prescribed quantity, the correction direction of astigmatism is adjusted, the optimum correction of astigmatism is performed.
    調整用部材を用いて第1のホルダ31を所定量傾斜させ、非点収差の補正量を調整した後、第2のホルダ33を所定量回転させ、非点収差の補正方向を調整し、最適な非点収差補正を行う。 - 特許庁
  • When the loaded ink cartridge is the non-genuine one, a unit price per print is set higher than when the ink cartridge is the genuine one in the main body apparatus, whereby output using the non-genuine one is reflected in the lease charge.
    本体装置では、装着されたインクカートリッジが非純正品である場合は、純正品のインクカートリッジの場合よりも、プリント1枚あたりの単価を高く設定することで、非純正品を使用した出力をリース料金に反映させる。 - 特許庁
  • Since etching rate of the upper layer Au is higher, lateral etching rate of Au is also high when a multilayer film of Au/Pt is etched using an aqua regia based solution and a tapering angle larger than two times the film thickness of Pt is formed.
    上層のAuの方がエッチングレートが大きいことから、Au/Pt積層膜を王水系の溶液でエッチングした際、エッチングレートの速いAuの横方向へのエッチングレートも大きく、Ptの2倍膜厚よりもテーパー角度が大きく形成される。 - 特許庁
  • By using this kind of the specific phosphonic acid monoester compound, the compatibility with resin is improved and the metal ion is excellently dispersed in the resin and consequently spectroscopic characteristics is improved in the case the optical material is made to be the optical member made of resin.
    このような特定のホスホン酸モノエステル化合物を用いることにより、樹脂との相溶性が改善され、金属イオンを樹脂中に良好に分散させることができ、よって、樹脂製光学部材としたときの分光特性を向上できる。 - 特許庁
  • When the silicon carbide single crystal is grown by a sublimation recrystallization method using a seed crystal, a mask is provided on the seed crystal and then the silicon carbide single crystal is grown across the mask, thereby the high purity silicon carbide single crystal ingot is obtained.
    種結晶を用いた昇華再結晶法により炭化珪素単結晶を成長させる際に、種結晶上にマスクを施し、そのマスク越しに炭化珪素単結晶を成長させることにより高品質な炭化珪素単結晶インゴットを得る。 - 特許庁
  • Since the cushion property is obtained by the structure that the cushion material whose form is imparted mainly by the natural fibers is housed in the surface cover material, the need of using urethane foam which generates a harmful gas such as a cyanogen gas as the cushion material is eliminated.
    主として天然繊維により形態性が付与されたクッション材が表被材に収容された構造によりクッション性を得るようにしたので、クッション材としてシアンガス等の有害ガスを発生するウレタンフォームを使用する必要はない。 - 特許庁
  • Even when an invention is claimed using a term other than ‘a program,’ if it is obvious, by taking into consideration the common general knowledge as of the filing, that the invention for which a patent is sought is “a program” which specifies a multiple of functions performed by a computer, the invention shall be treated as “a program.”
    請求項の末尾が「プログラム」以外の用語であっても、出願時の技術常識を考慮すると、請求項に係る発明が、コンピュータが果たす複数の機能を特定する「プログラム」であることが明確な場合は、「プログラム」として扱う。 - 特許庁
  • An image signal is modulated in an LD modulator 10, a light beam is generated by controlling a laser beam generator (LD) 11 using an output signal of the LD modulator 10, a photosensitive body is scanned by said light beam, and an electrostatic latent image is formed on said photosensitive body.
    LD変調装置10にて画像信号を変調し、その出力信号によりレーザビーム発生装置(LD)11を制御して光ビームを発生し、この光ビームにより感光体を走査して、該感光体上に静電潜像を形成する。 - 特許庁
  • Furthermore, an external force is given to a transmission part 3 which is associatively connected to the grip part 2, the transmission part 3 is oscillated with respect to the fixed part 1 using a support part 4 as a center, and force acting in an elongation direction from the substrate 11 is transmitted to the grip part 2.
    また、把持部2に連係接続された伝達部3に外力を付与し、支持部4を中心として伝達部3を固定部1に対して揺動させ、基板11からの離隔方向に作用する力を把持部2に伝達する。 - 特許庁
  • With the method for fixing a component temporarily, a component is adhered using the composition to fix it temporarily, and after processing the temporarily fixed component, the processed component is soaked in hot water whose temperature is 90°C or lower and the cured material of the compsition is removed.
    又、前記組成物を用いて部材を接着仮固定し、該仮固定された部材を加工後、該加工された部材を90℃以下の温水に浸漬して、前記組成物の硬化体を取り外すことを特徴とする部材の仮固定方法。 - 特許庁
<前へ 1 2 .... 520 521 522 523 524 525 526 527 528 .... 999 1000 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.
  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.