「Is Using」を含む例文一覧(49967)

<前へ 1 2 .... 521 522 523 524 525 526 527 528 529 .... 999 1000 次へ>
  • A prescribed recognition process is practiced by using the barcode image stored in the memory to generate barcode information (step ST3), the generated barcode information is stored (step ST4), and the barcode information is transmitted, when a transmission button is pushed (step ST5).
    そして、メモリに記憶されたバーコード画像を用いて所定の認識処理を行ってバーコード情報を生成し(ステップST3)、生成したバーコード情報を記憶して(ステップST4)、送信ボタンが押圧されたときに、バーコード情報を送信する(ステップST5)。 - 特許庁
  • The prepared hole A in the work W is punched by using the punch die P, the V-shaped groove 41 is machined in the outer circumference of the prepared hole A, the prepared hole A is protruded to the V-shaped groove 41 side, and a flange F1 is formed to implement the burring.
    また、このパンチ金型Pを使用し、ワークWの下穴A加工を行い、該下穴Aの外周にV溝41加工を行った後、該下穴AをV溝41側へ突出成形してフランジF1を形成することによりバーリング加工を行う。 - 特許庁
  • To provide a door guard in which a case when a door is held at a precautionary place and a case when the door is closed as it is without holding the door at the precautionary place can be selected arbitrarily and used properly by an operating person when the door is opened up to the precautionary place by using the door guard.
    ドアガードを使用して用心位置まで開扉した際に、用心位置に扉を保持させる場合と用心位置に保持させずにそのまま閉扉する場合とを操作者が任意に選択して使い分けることができるドアガードの提供。 - 特許庁
  • Thus, information is shared, manual work is not needed at the time of SI object file extraction work, a checklist is automatically created for the SI object file, and the structure which does not cause omission at the time of SI by using it is provided.
    これにより、情報の共有化を実現し、さらにSI対象ファイル抽出作業時に手作業を発生させず、またSI対象ファイルについてチェックリストを自動生成し、これを用いることでSI時の漏れを発生させない仕組みを備える。 - 特許庁
  • To provide a driving device using a power transmission belt in which a belting slip sound easy to take place especially in cases where angular acceleration of a crank pulley is large is restrained and a belting slip sound generating in the moment when an air compressor is switched on is restrained.
    特にクランクプーリの角加速度の大きい場合において発生しやすいベルトスリップ音を抑制し、またA/Cにスイッチを入れた瞬間に発生するベルトスリップ音を抑制した伝動ベルトの駆動装置を提供することを目的とする。 - 特許庁
  • To provide an unsaturated transformer, where a voltage which is proportional to the current running through a primary winding is provided to a secondary winding and its configuration is simple, and that is small and inexpensive, and a power-supply device, a discharge lamp device and a compact self-ballasted discharge lamp using this.
    1次巻線に流れる電流に比例した電圧が2次巻線に得られて、構成が簡単で、小形かつ安価な不飽和形変圧器、これを用いた電源装置、放電ランプ装置および電球形放電ランプを提供する。 - 特許庁
  • In using the tacky adhesive label 10, the label is bent along the perforations 4 and the tacky adhesive surface of the tacky adhesive layer 2 is attached to the merchandise, by which the partial tacky adhesive label exposed with the tacky adhesive surface is formed and is attached in the form of the loop to the mechanism, etc.
    使用時には前記貼合用粘着ラベル10のを前記ミシン目4に沿って折り曲げて粘着剤層2の粘着面を貼合することにより粘着面が露呈した部分粘着ラベルを形成し、商品などにループ状に取りつける。 - 特許庁
  • A base material is laminated on the conductor pattern 12 produced, which is subjected to a press working process to the base material using a die heated to a temperature over the softening point of the base material, so that thermocompression bonding is established, followed by punching off of the contour, and thus the intended flexible print circuit harness is manufactured.
    形成した導体パターン12にベース材をラミネートし、ベース材の軟化点以上の温度に加熱した金型で導体パターンをベース材にプレス加工して熱圧着し、外形抜きを行いフレキシブルプリント回路ハーネスを製造する。 - 特許庁
  • To provide an image forming means by which the surface of a silver salt color film is scanned and exposed while carrying digital image information in beam light, the sharpness of an image is not damaged and color saturation is not lowered either, even when this film is processed by using a developer containing CD-3.
    デジタル画像情報をビーム光に 担持させて銀塩カラーフィルム上に走査露光し、これをCD−3含有現像液を用いて処理しても画像のしまりを損なわず、色彩度の低下も起こさない画像形成手段を提供すること。 - 特許庁
  • The deposition rate of the vapor deposition material can be controlled using the fact that the deposition rate is increased when pressure in the vacuum chamber 10 is lowered and the deposition rate is decreased when the pressure in the vacuum chamber 10 is raised.
    真空槽10内部の圧力を小さくすれば蒸着物質の蒸着速度は速くなり、真空槽10内部の圧力を大きくすれば蒸着物質の蒸着速度は遅くなるということを利用して蒸着速度を制御する。 - 特許庁
  • The dust accumulated in the duct 3 is discharged and recovered by using equipment 1 for recovering dust, which is provided with the duct 3, in which a dust-containing gas is made to flow, and a conveyer 5 which is arranged at the bottom of the duct 3 and used for conveying the dust accumulated in the duct 3 to the outside of the duct 3.
    ダストを含む気体が流れるダクト3と、ダクト3の底部に設置され、ダクト3に堆積したダストをダクト3の外へ搬送するコンベア5とを備えるダスト回収設備1を用い、ダクト3に堆積したダストを排出、回収する。 - 特許庁
  • The production method for a sintered compact is provided with a first stage where raw material powder is granulated by using a binder solution in which carburization agent powder is suspended, and a second stage where the granulated powder obtained by the first stage is compacted and sintered.
    本発明の焼結体の製造方法は、加炭剤粉末を懸濁させたバインダ溶液を用いて原料粉末を造粒する第1工程と、第1工程により得られた造粒粉末を成形し、焼結する第2工程と、を備える。 - 特許庁
  • A part of the input signal light is branched by the divider 12a, it is delayed by the delay time Δt by using a delay medium 14, it is received by a first photodetector 15a, and an input signal light intensity Pin is detected.
    入力した信号光の一部は、第1光分岐器12aにより分岐され、遅延媒体14により遅延時間Δtだけ遅延され、第1光検出器15aにより受光されて、入力信号光強度P_inが検出される。 - 特許庁
  • When a search character is inputted on the search main screen and execution of search is instructed, a search means 7 in the server 2 is called by using the search condition as an argument, and a search result is transmitted to the browser 5 to be displayed in a display part 4.
    そして、検索メイン画面上で、検索文字が入力され、検索の実行が指示されると、検索条件を引数として、サーバ2の検索手段7が呼び出され、検索結果がブラウザ5に送信されて、表示部4に表示される。 - 特許庁
  • During braking (S10) or when a throttle opening TVO is 0 (S9), noise intrusion judgement is correct in operation with noise intruding in Vwdl or Vwdr, a third detected value from Vwdl, Vwdr, and left and right driven wheel speed detected values Vwnl and Vwnr is used as VSP in S11, and VSP is calculated by using Vwnl and Vwnr.
    スロットル開度TVOが0の時(S9)、または制動中なら(S10)、Vwdl,Vwdrにノイズが混入する運転でノイズ混入判断が正しいから、S11でVwdl,Vwdrおよび左右従動輪速検出値Vwnl,Vwnrのうち、3番目の検出値をVSPとし、Vwnl,Vwnrを用いてVSPを算出する。 - 特許庁
  • For example, when a first stop button is operated, at the first reel stop control configuration determining unit, the first reel 9a is stopped by the kick-off control or the pull-in control is determined, and the first reel 9a is stopped by using the determined stop control.
    例えば、第1ストップボタンが操作されると、第1リール停止制御態様決定部では、第1リール9aを蹴飛ばし制御で行うか、引き込み制御で行うかを決定し、決定された停止制御を用いて第1リール9aを停止させる。 - 特許庁
  • Using a circular blank 27, a pulse area 55, for example, having a rectangular contour is prescribed, and a laser beam is moved along a predetermined tracing B, thus laser abrasion is performed, and a material is removed from the blank material so as to be a predetermined shape.
    円形ブランク27を用い、例えば矩形の輪郭をしたパルス領域55を規定して、レーザビームを所定の軌跡Bに沿って移動することによってレーザアブレーションが行われ、ブランク材から材料が除かれ所定の形状とされる。 - 特許庁
  • The hinge frame of an existing eyeglass frame is replaced with a screw 7 having a length capable of using this nut 3 with a horizontal hole, and a fastening degree of the screw is adjusted so that a temple 2 is moved smoothly, and the screw is doubly-locked and fixed by the nut 3 with the horizontal hole for removal of the accessory.
    既存の眼鏡フレームの丁番ネジを横穴付ナット3が使用可能な長さのネジ7に交換し、テンプル2がスムーズに動くようネジの締め具合を調整し、アクセサリー着脱用横穴付ナット3でダブルロックし固定する。 - 特許庁
  • To ensure wide communication with a high S/N ratio even if an antenna in which the aperture of an interrogator is small is used, the distance between the interrogator and a response unit is short, or the site is noisy and to communicated with a large number of response units using one interrogator.
    質問器の口径の小さいアンテナでも、質問器および応答器のアンテナ間が近距離でも、雑音の多い場所でも、交信面が広く、S/N比の良い交信を迅速に、可能にし、一つの質問器で多数の応答器と交信する。 - 特許庁
  • Even if a ball is not placed on the face by an erroneous shot, since the momentum of the ball is not large, shooting can be practiced using a fence such as curtain, and even if the fence is set near the area where swinging is practiced, performance of swinging can be checked.
    もし、ミスショットによってボールをフェースに重着できなくても、ボールの運動量が大きくないためカーテン程度の軽微な障壁で用を足すことができるし、障壁を近付けて設置してもショットの良否の判断に支障をきたすことはない。 - 特許庁
  • In this case, when decision of a trouble due to which a valve overlap amount is excessive is established (at step S18=Yes), the opening of an EGR valve is decreased to decrease an external HER amount, and an exhaust gas recirculation factor is reduced by using no VVT (at step S20).
    このとき、バルブオーバラップ量が過大となる故障の判断が成立すると(ステップS18=Yes)、EGRバルブ開度を引き下げて外部EGR量を減少し、VVTを用いることなく排気ガス還流率を低下させる(ステップS20)。 - 特許庁
  • On the side of the television 1, the received identification code is collated with each identification code previously registered on the side of the television 1 and when there is any code coincident as a result of collation, the user is certified so that the operation of the television 1 using the remote controller 2 is permitted thereafter.
    テレビ1側では受信した識別コードとテレビ1側に予め登録されている各識別コードとが照合されて、照合一致するものがあればユーザ認証されて、以降リモコン2を用いたテレビ1の操作が許可される。 - 特許庁
  • When the horizontal OB region is small, the beat noise is detected in the vertical OB region, and since the detected region is located in an upper part of the image, the beat noise in the object region (lower part of the image) is removed using the detected beat noise data.
    また、水平OB領域が小さい場合は、垂直OB領域でビートノイズを検出し、検出した領域が画像上部のため、検出したビートノイズデータを用いて画像データの被写体領域(画像下部)のビートノイズを除去する。 - 特許庁
  • A movable body 6 is installed on the top side of a coplanar line 3 formed on a substrate 2, and is driven by using the electrostatic attracting force so that position is varied to the direction in which a space between the moving body 6 and the substrate 2 is made bigger.
    基板2上に形成されたコプレーナー線路3の上方側に可動体6を配置し、可動体6と基板2との間隔が広がる方向に変位するよう静電引力を利用して可動体6を変位させる可動体駆動手段を設ける。 - 特許庁
  • A light source 8 using light emitting diodes 8a to 8c is provided inside a base 2, a translucent red globe 3 is mounted with the front part of the base 2 covered and further, a terminal part 4 to which a power wire from the outside is connected is integrally provided in the back of the base 2.
    ベース2の内部に発光ダイオード8a〜8cを用いた光源8を設け、ベース2の前部を覆って透光性の赤色グローブ3を装着し、更にベース2の背後に外部からの電源線を接続する端子部4を一体に設ける。 - 特許庁
  • The coating film is formed by filtering a coating material to be used by using a filter whose aperture part is ≤100 μm and applying the coating material on the surface of the elastic layer of the electrifying roll under environment where temperature is 0 to 30°C and humidity is ≤80%RH.
    該コート膜形成に使用する塗料を開口部が100μm以下のフィルターを使用して濾過処理し、更に温度0〜30℃、湿度80%RH以下の環境下で塗装して帯電ロールの弾性体層表面にコート膜を形成する。 - 特許庁
  • Displaying of measurement result is carried out by using a personal computer; and when displaying the measurement results, in response to the conditions that the buried object is grounded or is a hollow pipe and is not grounded, high and low levels are displayed in reverse to the condition, such that the levels of both conditions agree with each other in display.
    計測結果の表示は、埋設物体が接地されている或いは中空管の場合と、接地されていない場合とに応じて、どちらかを高低のレベルを反転させて行い、両者の場合のレベルの表示が一致するようにした。 - 特許庁
  • To provide a display device changing over stereoscopic images and plane images, which device is thin and small in size, is high in the speed of the changeover between the stereoscopic images and the plane images, is high in display quality, and is low in cost and a portable terminal system using the same.
    薄型且つ小型であり、立体画像表示と平面画像表示の切換が高速であり、表示品質が高く、低コストである立体画像平面画像切換表示装置及びこれを使用する携帯端末装置を提供する。 - 特許庁
  • To provide a cushioning member for packaging, which is highly recyclable, is more resistant to a degradation in shock eliminating properties than in the case of using an independent paper pipe as it is even if external force is applied, and can be more simply manufactured than a cushioning medium for packaging with a complicated form.
    リサイクル性が高く、独立した紙パイプをそのままの状態で用いた場合に比べて外力が加わっても衝撃緩衝性が低下しにくく、複雑な形状の包装用緩衝材に比べて簡単に製造できること。 - 特許庁
  • This embodiment is provided with a function of searching, by means of a search engine, a character string which is determined to be registered in a dictionary and is created by the player, that is a created character string, and a function of obtaining detail information using a given data base.
    本実施形態では、辞書に登録されていると判定されたプレーヤが作成した文字列、つまり作成文字列を、検索エンジンを用いて検索する機能、所与のデータベースを用いて詳細情報を取得できる機能を設ける。 - 特許庁
  • A winding is inserted into a partitioning space 225 by using a partitioning structure insulator 22 in order to solve the problem, the crossover is inserted into a groove 223, the wiring is easily optimized, and then, the insulator 22 is inserted into a stator core and fixed thereto.
    そうした目的のために間仕切り構造インシュレータ22を用い、間仕切り空間225に巻線部を挿入し、溝部223に渡り線を挿入して、簡易に配線の適正化を行った上で、インシュレータ22をステータコア内に挿入、固定する。 - 特許庁
  • For example, a timing signal for showing that a CM, or the like, which is not related directly to a program main part is being received is generated from management information, or the like, included in digital broadcasting waves, and a display content is changed by using the timing shown by the signal.
    例えば、デジタル放送波に含まれる管理情報等から、番組本編とは直接関係しないCM等を受信中であることを示すタイミング信号を生成し、この信号が示すタイミングを用いて、表示内容の変更を行う。 - 特許庁
  • The inspection apparatus captures the image of the base of a lead 32 by using a camera 13, the data of the captured image is converted into two-valued data and the two-valued data of the glossy surface of the lead 32 is created, and whether the semiconductor device 11 is a defective is determined though comparison with a reference value.
    前記した検査装置は、カメラ13によってリード32の底面を撮像し、撮像したデータを2値化してリード32の光沢面の2値化データを作成し、基準値と比較して半導体装置11の良否を判定する。 - 特許庁
  • An oxide layer 12 is grown on a board 10 and patterned using a first resist as a mask, a tunnel part 24 is etched to expose a part of the board 10 located under the tunnel part 24, an ion-implanted region 18 is formed inside the board 10 by implantation of nitrogen ions, and then the resist is removed.
    基板10上に酸化物層12を成長させ第1レジストでパターニングしてトンネル部24をエッチングして基板を露呈し、窒素イオンを注入して基板10にイオン注入領域18を形成した後レジストを除去する。 - 特許庁
  • The fibrous activated carbon with excellent adsorptivity is obtained using a fibrous activated carbon of which the specific surface area is 700-1,500 m^2/g, the total pore volume is 0.3-0.7 cc/g and the amount of functionality is 0.5 meq/g or less.
    比表面積700〜1,500m^2/g,全細孔容積0.3〜0.7cc/g,且つ表面酸性基量が0.5meq/g以下と官能基量が少ない繊維状活性炭を使用した際に、吸着性能が優れることを知見した。 - 特許庁
  • The method for removing the copper contained in the steel scraps, is performed as the followings that the copper-containing steel scrap is carburize-melted to produce molten iron for steel-making, and thereafter, the copper contained in this molten iron is removed by using sulfur-containing flux, and successively, the sulfur contained in the molten iron is removed.
    鋼屑中の銅の除去方法は、銅含有鋼屑を加炭溶解して製鋼用溶銑を製造し、その後、該溶銑に含まれる銅を硫黄含有フラックスを用いて除去し、次いで、溶銑に含まれる硫黄を除去する。 - 特許庁
  • To provide a resealable sealing bag using an adhesive tape in which the adhesive layer is not exposed to a surface but when the adhesive tape is hot-melt bonded to a predetermined position and then the tape is peeled, the adhesive layer having the same widhth as that of the hot-melt bond portion is exposed.
    粘着剤層が表面に露出せず、所定の部位に融着した後テープを剥離することにより、融着幅と等しい幅で粘着剤層が露出する粘着テープを用いた再密封可能な密封袋を提供する。 - 特許庁
  • A coating material is separated into a solution A containing a film-forming synthetic resin emulsion and a solution B containing a partially hydrolyzed condensate of ethylsilicate and an emulsifying agent, and immediately before using them, the solution B is emulsified into water and the emulsion is mixed with the solution A and the mixture is used for coating.
    塗料をフィルム形成性合成樹脂エマルションを含むA液と、エチルシリケート部分加水分解縮合物および乳化剤を含むB液とに分離し、使用直前にB液を水中に乳化し、A液と混合して塗装に用いる。 - 特許庁
  • A para-type wholly aromatic copolyamide having the following structural repeating units (1)and (2) in which the neutralization degree at the time of the completion of polymerization is 75-95 mol% and in which the polymer intrinsic viscosity (IV) is 5.0-7.0 is obtained, and a fiber is formed by using the polymer solution.
    重合終了時の中和度を75〜95モル%、およびポリマー固有粘度(IV)を5.0〜7.0として、下記(1)および(2)の構造反復単位を有するパラ型全芳香族コポリアミドを得、このポリマー溶液を用いて繊維を形成する。 - 特許庁
  • After performing segmentation in a card shape, when printing is performed to the thermosensitive recording layer 16 by using a thermosensitive printing testing device, red color is developed by low applied energy, black color is developed by high applied energy and printing quality is excellent.
    カード状に切り出した後、この感熱記録層16に感熱印字試験装置を使用して印字したところ、低い印加エネルギーでは赤発色が生じ、高い印加エネルギーでは黒発色を行うことができ、印字品質は良好であった。 - 特許庁
  • The upper layer portion (3) is selectively and anisotropically dry-etched using the masks 41 until the upper surface of the intermediate portion 2 is exposed, and then, the intermediate portion 2 is selectively etched until the upper surface of the lower layer portion 1 is exposed, and finally, the masks 41 are selectively etched.
    そして、マスク41を用いて中層部2の上面が出るまで上層部3を選択的かつ異方的にドライエッチングし、次に、下層部1の上面が出るまで中層部2を選択的にエッチングし、最後に、マスク41を選択的にエッチングする。 - 特許庁
  • Fingerprint information of a user permitted to utilize the information terminal for a domestic electrical appliance is registered, the registered fingerprint information is collated with inputted fingerprint information to perform authentication and if the authentication is made successful, control using the remote controller is validated.
    情報家電端末の利用が許可されている利用者の指紋情報を登録し、登録されている指紋情報と入力された指紋情報とを照合して認証を行い、この認証が成功したときにリモコン制御を有効にする。 - 特許庁
  • The filling method for low-temperature liquefied gas is provided, which is a method for filling low-temperature liquefied gas into a high pressure filling container, characterized in that low-temperature liquefied gas transporting piping is thermal insulating piping and gas is filled into the high pressure filling container using a pump.
    低温液化ガスを高圧充填容器に充填する方法において、低温液化ガス移送配管を断熱配管とし、ポンプを用いて高圧充填容器に充填することを特徴とする、低温液化ガスの充填方法を提供する。 - 特許庁
  • To provide an ink jet recording sheet wherein in an ink jet recording system using water base ink, a high quality ink jet image which is excellent in a color developing property and the sharpness of an image is obtained, the sheet after recording the image is little in waving and a high smooth feeling is provided.
    水性インクを用いるインクジェット記録方式において、画像の発色性、鮮明性に優れた高品質インクジェット画像が得られ、画像記録後シートの波打ちが少なく、高平滑感のあるインクジェット記録シートを提供すること。 - 特許庁
  • To provide a magnetic tape cassette using a friction sheet which is reduced in the friction generated between a magnetic tape and the friction sheet, is extremely little in the clipping of the sheet and the peeling of an antistatic agent with which the sheet is impregnated and is extremely excellent in durability and slidability.
    磁気テープとフリクションシートとの間に発生する摩擦が低減され、シートの削れやシートに含浸された帯電防止剤の剥がれが極めて少ない、耐久性、摺動性に優れたフリクションシートを使用する磁気テープカセットの提供。 - 特許庁
  • The universal tool box for construction is of as simple a structure as possible, namely, of a structure which is fault-free and does not occupy a large space, a polyethylene sheet 10 is connected with a Cremona rope 6, and is fixed to hexagon head bolts by using the elasticity of a plurality of crude rubber-made rings 9.
    極力構造を簡単にして、故障がなくスペースのとらない構造とし、ポリエチレン系シート10をクレモナロープ6で結合して、生ゴム9の伸縮を利用して六角ボルトに固定する工事用万能道具箱である。 - 特許庁
  • As a result, when it is determined that the face picture FP1 is in the bottom side and the composition discriminating means 30 discriminates that the entire picture P is the landscape composition, trimming is automatically executed using a trimming frame TG 10 of the portrait composition.
    その結果、顔画像FP1が地側にあると判別されたときであって、構図識別手段30において全体画像Pが横長構図であると識別されたとき、縦長構図のトリミング枠TG10を用いてトリミングが自動的に行われる。 - 特許庁
  • To provide an image forming method by which even when rapid processing is performed with a compact heat development apparatus using two heat plates, high image density is obtained, contamination in the heat development apparatus is avoided and excellent transportability of a film is ensured.
    本発明の目的は、2枚のヒートプレートを使用したコンパクトな熱現像装置を用いて迅速処理を行った場合でも画像濃度が高く、熱現像装置内の機内汚染、フィルムの搬送性に優れる画像形成方法を提供する。 - 特許庁
  • Since the valve element is pressed to the valve seat using the repulsion of the magnet, even if the motor-operated valve is miniaturized, the valve element can sufficiently be pressed to the valve seat when the valve element is rotated, a friction force is not generated and the load of the electric motor can be reduced.
    磁石の斥力を用いて弁体を弁座に押圧するため、電動弁を小型化しても弁体を弁座に十分に押圧することができ、弁体が回転する際に摩擦力が発生せず、電動モータの負荷を低減することができる。 - 特許庁
  • This electrophotographic transfer paper is formed so that the maximum value of the curl height of four corners measured by using a square test piece whose length of one side is about 10 cm on an absolutely dried basis is ≤ about 30 mm and the formation index thereof is ≥25.
    1辺の長さが10cmの正方形の試験片を使って測定した絶乾時の4つの角のカール高さの最大値が30mm以下であり、地合指数が25以上であることを特徴とする電子写真用転写紙。 - 特許庁
<前へ 1 2 .... 521 522 523 524 525 526 527 528 529 .... 999 1000 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.