The data is read from the RFID tag by using an exclusive RFID R/W 38 and an exclusive RFID R/W 46 at a perforation process and a winding process, then, the data is used for a production information check and a processing control. 穿孔工程,巻込工程では、専用のRFID R/W38とRFID R/W46とを用いてRFIDタグからデータを読み出し、製品情報のチェックや加工制御に利用する。 - 特許庁
Ar_2BR^1 (I), Ar_3B^-R^1-X^+ (II) [wherein, Ar is an aryl or heterocyclic ring group, which may be substituted; R^1 is an alkyl or an aralkyl, which may be substituted; and X^+ is a counter cation]. Ar_2BR^1…(I)Ar_3B^-R^1・X^+…(II)(式中、Arは、置換していてもよいアリール基または複素環基を表し、R^1は、置換していてもよいアルキル基またはアラルキル基を表し、X^+は、カウンターカチオンを表す。) - 特許庁
When there are no data recorded in a CD-R, identification information and data are recorded into the CD-R (steps 104, 114), and the identification information is stored in the device used in the recording (step 115). CD−Rにデータの記録がされていない場合には、識別情報と、データとをCD−Rに記録する(ステップ104、114)とともに、この記録に使用した機器に識別情報を保存する(ステップ115)。 - 特許庁
At the cold time of the internal combustion engine, the target air-fuel ratio R and L at warm time is corrected to R' and L' to be applied at the cold time so that the air-fuel ratio of exhaust gas supplied to the air-fuel ratio sensor becomes equal to the warm time. 内燃機関の冷間時、空燃比センサに供給される排気ガスの空燃比が温間時と等しくなるように、温間時の目標空燃比R,Lを冷間時に適用すべくR’,L’へと補正する。 - 特許庁
A work piece to be worked (a sheet material) is conveyed to a receiving bed R with the receiving surface of the receiving bed R pressurized with an air supplied by an air supply-and-drain part GS (a pressurizing portion included) through the hole TH. 気体給排部GS(加圧部を内蔵)により、孔THを通じて気体を供給して、受け台Rの受け面上を加圧状態にした状態で、この受け台Rに被加工物(シート材)を搬送する。 - 特許庁
If the container body 5 is equipped with a protrusive part 11 on its inner circumferential surface 2a, the swelling of the contained dust R is more effectively regulated by the protrusive part 11, making it possible to contain much more dust R. 更に、容器本体5の内周面2aに凸状部11を備えていると、該凸状部11にて、収容した塵Rの膨出をより効果的に規制して、更に多くの塵Rを収容することが可能になる。 - 特許庁
The required time T2' of the DVD used as calculation of the threshold is calculated from the ratio R stored in a RAM 9 and required time T1' of the CD which is actually measured with the ratio R of the required time as a fixed value. 閾値の計算として使用されるDVDの所要時間T2’を、所要時間の比率Rを固定値として、RAM9に記憶される比率Rと実測されたCDの所要時間T1’より算出する。 - 特許庁
A roller 12 or a truck to horizontally movably place the heavy weight 10 between an allowable operating radius region R at suspending the heavy weight and the rear region of the loading space beyond the region R is placed on the loading space 3. 荷台3上に、重量物10を重量物吊下時許容作業半径域Rと当該域Rを越えた荷台後部域との間で水平移動可能に載置するローラ12または台車を配置する。 - 特許庁
A side member 20 extending from the side face of the vehicle body to the longitudinal direction of the vehicle body comprises a hollow body portion 26 connected to a floor under R/F 24 and an axial crush member 28 connected to a bumper R/F 22. 車体側面において車体前後方向に延在するサイドメンバ20を、フロアアンダR/F24に連結する中空のボディ本体部26と、バンパR/F22に連結する軸圧壊部材28と、により構成する。 - 特許庁
In a radio communication apparatus 2 provided with a Bluetooth (BT) (R) communication part 26 and an SS radio communication part 27, a test pattern is transmitted from the BT(R) communication part 26 (step S2) and received by the SS radio communication part 27 (step S3). Bluetooth(BT)通信部26とSS無線通信部27が設けられた無線通信装置2において、BT通信部26からテストパターンを送信し(ステップS2)、SS無線通信部27により受信する(ステップS3)。 - 特許庁
In addition, when list data, etc. are inputted on a space on the CD-R image from a key board 13, the front data are rotated and converted in the reverse direction and are printed on the CD-R by means of an ink-jet printing mechanism 27. そして、CD−R画像上のスペースにキーボード13から目録データなどを入力すると、そのフォントデータが逆方向に回転変換されてインクジェット印字機構27によりCD−Rに印字される。 - 特許庁
An L/R system 20 including the L/R 5 controls speed, stop and start of the vehicle, and the HDRC 6 picks up the images before and after the start of traveling vehicle as a first image M1 and a second image M2. L/R5を含むL/Rシステム20は、車両の速度制御、停止制御、発進制御を行い、HDRC6は、先行車両の発進前後の画像を第1の画像M1、第2の画像M2として撮像する。 - 特許庁
The decoding part 15 extracts a modulus number (n) from a modulus number storage part 13, extracts first decoded information d1 from a first decoded information storage part 14, calculates R=C'^d1d2modn and outputs R via an output part 12. 復号部15は、法数記憶部13から法数nを、第1復号情報記憶部14から第1の復号情報d__1を取り出し、R=C’^d1d2 mod nを計算し、出力部12を介して、Rを出力する。 - 特許庁
Where, formula (1) is expressed by R^1-O-(AO)^p-X and in the formula, R^1 expresses a (metha)acryloyl group; O expresses oxygen atom; AO expresses a 2-4C oxyalkylene group; (p) expresses 1-200 and X expresses hydrogen atom or a 1-18C alkyl group. R^1−O−(AO)p−X (1)式中、R^1は(メタ)アクリロイル基、Oは酸素原子、AOは炭素数2〜4のオキシアルキレン基、pは1〜200の数、Xは水素原子又は炭素数1〜18のアルキル基を表す。 - 特許庁
A plurality of bolt penetrating holes 11b as extra-spaces are provided, which are left open to a crank chamber R, and a communication passage 21 leading to the crank chamber R is formed from one end of the oil in the oil storage chambers 11b and a place opposite thereto. クランク室Rに開放された複数の余空間としてのボルト貫通孔11bである、潤滑油の貯油室11bにおける一端と反対側箇所から、クランク室Rに通ずる連通路21を設ける。 - 特許庁
The voltage decrease (V0-V1) is divided by the current value I1 to find an internal resistance value R of the lead-acid battery, and the residual life of the battery is determined using the resistance value R to be displayed. そして、該電圧低下分(V_0−V_1)を前記電流値(I_1)で割り算をして、鉛蓄電池の内部抵抗値(R)を求め、該内部抵抗値(R)を用いて鉛蓄電池の残り寿命を判定して表示する。 - 特許庁
A region R under consideration is extracted from an image obtained by photographing the object, a standard point P1 is set in the image, and the position of the region R under consideration is stored as relative position information from the standard point P1. 被写体を撮影して得られた画像から注目領域Rを抽出し、画像中に基準点P1を設定して、注目領域Rの位置を基準点P1からの相対位置情報として記憶する。 - 特許庁
The polymer containing epoxy group is produced by polymerizing the ethylenic unsaturated bond of a compound expressed by formula (g) or formula (h) (R^9 is an ethylenic unsaturated group) or copolymerizing the above compound with one or more other compounds having ethylenic unsaturated bond. 式(g)又は式(h):{式中、R^9=エチレン性不飽和基}で表される化合物のエチレン性不飽和結合部分を重合、又は他の1種以上のエチレン性不飽和結合を持つ化合物と共重合させる。 - 特許庁
Specifically, an effective range is set with a given width Rw centered on an average value RAVE of right-to-left rolling wheel ratios R, and data on a right-to-left rolling wheel ratio R determined to be outside the effective range are screened out. 具体的には、転動輪左右比Rの平均値R_AVEを中心とした所定の幅Rwを有効範囲とし、求められた転動輪左右比Rが有効範囲外となる場合のデータを除去する。 - 特許庁
To prevent a distortion sound, that may be generated in a surround signal based on a difference signal L-R, from being generated when generating the surround signal regarding audio signals L, R of two channels obtained by decoding a compression signal. 圧縮信号をデコードして得られる2チャンネルのオーディオ信号L,Rについて、差信号L−Rによるサラウンド信号を生成するとき、該サラウンド信号に生じる可能性のある歪み音の発生の防止を図る。 - 特許庁
・Among R-Phrases in EU-Annex I, those related to sensitization are R42 (may cause sensitization by inhalation), R43 (may cause sensitization by skin contact) and R42/43 (may cause sensitization by inhalation and skin contact). ・感作性に関するEU-Annex I のR-Phrase として、R42(吸入により感作性を引き起こすことがある)、R43(皮膚接触により感作を引き起こすことがある)、R42/43(吸入及び皮膚接触により感作性を引き起こすことがある)がある。 - 経済産業省
In addition, for the purposes of investment, it is thought that investments in R&D to supplement lacks in technical resources (i.e., the aforementioned "home-base-augmentation" R&D) have increased, in addition torrid that exploits the local market. また、その投資目的も、現地市場開拓型の研究開発だけではなく、技術資源の不足を補完するための研究開発投資(前述のhome-base-augmenting型)の研究開発投資が増えていると考えられる。 - 経済産業省
In Japan, the results of the estimation for the major corporate classification of manufacturers and non-manufacturers showed the positive impact of non-R&D intellectual assets inherent in each company on the corporate performance except for non-manufacturers. 日本において製造業・非製造業といった大分類での推計結果では、各企業固有の非R&D知的資産の非製造業の企業パフォーマンスに対する影響を除いて、プラスの影響を与えている。 - 経済産業省
The US companies’ PR activities include setting up R&D bases in China, showing their long-term commitment to the China market, and providing scholarship for academically excellent university students. 米国企業は、例えば、中国にR&D拠点を設置することを、長期にわたる中国市場へのコミットメントの意思表示と位置づける、また、大学の優秀な学生に奨学金を与える等のPR上の工夫を行っている。 - 経済産業省
(Note 2) “R&D Site” herein shall refer to facilities needed to carry out R&D, such as industrialization through applied development, trials and product testing from advanced industrial technology in line with technological innovation.
"(注2)「研究開発拠点」とは、技術革新の進展に即応した高度な産業技術の研究から応用開発、試作、製品試験等による産業化等の研究開発を行うために必要な施設とします。 - 経済産業省
(Note 2) "R&D Site" herein shall refer to facilities needed to carry out R&D, such as industrialization through applied development, trials and product testing from advanced industrial technology in line with technological innovation. "(注2)「研究開発拠点」とは、技術革新の進展に即応した高度な産業技術の研究から応用開発、試作、製品試験等による産業化等の研究開発を行うために必要な施設とします。" - 経済産業省
Mitigation. Contribution of Working Group III to the Fourth Assessment Report of the Intergovernmental Panel on Climate Change, ed. B. Metz, O.R. Davidson, P.R. Bosch, R. Dave, L.A. Meyer (Cambridge, United Kingdom and New York, NY, USA: Cambridge University Press, 2007).
B. Metz、O.R. Davidson、P.R. Bosch、R. Dave、L.A. Meyer 編纂「気候変動に関する政府間パネル第4 次評価に関する報告(The Fourth Assessment Report of Governmental Panel on Climate Change)」へのワーキングループⅢの寄稿(英国ケンブリッジおよび米国ニューヨーク州ニューヨーク市:ケンブリッジ大学出版局、2007 年)。 - 経済産業省
(Note 2) “R&D Site” herein shall refer to facilities needed to carry out R&D, such as industrialization through applied development, trials and product testing from advanced industrial technology in line with technological innovation.
(注2)「研究開発拠点」とは、技術革新の進展に即応した高度な産業技術の研究から応用開発、試作、製品試験等による産業化等の研究開発を行うために必要な施設とします。 - 経済産業省
In FY2009, the number of joint R&D projects between universities and private corporations stood at 14,779, while that of R&D projects commissioned from private corporations to universities was 6,185. The number of university-launched venture businesses amounts to 2,027 on an accumulated total basis.
2009年度においては、大学等と民間企業との共同研究は1万4,779件、大学等における民間企業からの受託研究は6,185件が実施されており、大学発ベンチャー数は累計2,027社を数えている。 - 経済産業省
A reticule R is put in a reticule cassette C and kept in custody in a library 202, and the reticule R taken out by a transfer arm 207 is transferred from a position P1 to an position P2 by a carrier 208, and supplied to a reticule stage 209. レチクルRはレチクルカセットCに入れてライブラリ202に保管され、搬送アーム207によって取り出したレチクルRをキャリア208によって位置P_1 から位置P_2 へ運び、レチクルステージ209へ供給する。 - 特許庁
To precisely correct port wall surface adhesion fuel even if change of DI ratio r (0<r<1) and change of load occurs in an internal combustion engine provided with a cylinder injection injector and an intake air passage injection injector. 筒内噴射用インジェクタおよび吸気通路噴射用インジェクタを備えた内燃機関において、DI比率rの変化(0<r<1)や負荷の変化があっても、ポート壁面付着燃料を的確に補正する。 - 特許庁
A memory M2 includes a wireless communication execution condition table TB2 describing a correspondence among the battery voltage V, a communication term T2, the number of times of retry R, and transmit power W (low V to long T2, small R and small W). メモリM2に電池電圧Vと通信周期T2,リトライ回数R,送信電力Wとの対応(V低→T2長,R少,W小)を記した無線通信実行条件テーブルTB2を設ける。 - 特許庁
The substance to be fixed is brought into contact with a hydroxyalkylthiol expressed by general formula (1): HS-R-OH - (in the formula, R denotes a hydrocarbon group) to obtain the fixed substance with hydroxy group (OH group) combined on its surface. 被固定化物に、一般式(1)「HS−R−OH………(1)(式中、Rは炭化水素基を示す)」で表されるヒドロキシアルキルチオールを接触させて、表面に水酸基(OH基)が結合した処理被固定化物を得る。 - 特許庁
A through-hole 6 passing through parallel to a rail R is formed in a plurality of grade crossing plates laid along the direction of the rail R, and a fixed bar 7 forming threads on both ends is inserted in the through-hole 6. レールR方向に沿って敷かれた複数枚の踏切板1に、レールRと平行に貫通する貫通孔6を形成し、この貫通孔6に、両端にネジ山を形成した固定棒7を挿通する。 - 特許庁
The moving frame 10 retreats at a retreating speed the same or more than a feed speed of the feed conveyer 30, and the structural angles R, R, etc., on the feed conveyer 30 can be transferred by dispersing them within a loading width Wa of the rack 50. 移動フレーム10は、送りコンベヤ30の送り速度以上の後退速度により後退し、送りコンベヤ30上の形材R、R…をラック50の積載幅Wa 内に分散して移載することができる。 - 特許庁
The radius R can take an appropriate value between the value exceeding the radius (r) of the roundness formed by the corners of the bottom 84a of the coil slot 3 and the maximum value of almost half the width dimension Ws of the coil slot 3. 半径Rの値は、コイルスロット3の底部84aの隅部が持つ丸みの半径r値を越え、コイルスロット3の幅寸法Wsのほぼ1/2を最大値とする間の適宜の値をとることができる。 - 特許庁
A light source L makes a light irradiated along an optical path LW toward an exposure target surface R, and a shutter 10 blocks the light from the light source L to the exposure surface R midway of the optical path LW. 光源Lは、被露光面Rに対して光路LWに沿って光を照射しており、シャッター10は、上記光路LWの途中部において、光源Lから被露光面Rへの光を遮断している。 - 特許庁
From the viewpoint of the importance of such response to market needs as a means to increase profits in the Chinese market, the tendency for Japanese companies to expand their R&D activities in China are likely to continue in the foreseeable future. このような中国市場からの収益を拡大するための市場ニーズへの対応等の必要性の観点から、日本企業の中国におけるR&D活動の拡大傾向は、当面続くものと考えられる。 - 経済産業省
The composition for removing residues from microstructures comprises carbon dioxide, an additive for removing residues containing a fluoride represented by the chemical formula: NR^1R^2R^3R^4F (wherein, R^1, R^2, R^3 and R^4 are each independently H or an alkyl) and a compatibilizer for dissolving the additive in the carbon dioxide liquified under a high pressure. 微細構造体から残留物を除去するための組成物であって、二酸化炭素と、化学式NR^1R^2R^3R^4F(R^1、R^2、R^3およびR^4は、それぞれ独立して水素またはアルキル基を示す。)で示されるフッ化物を含む残留物除去用添加剤と、高圧下で液体状になっている前記二酸化炭素に前記添加剤を溶解させるための相溶化剤とを含むことを特徴とする残留物除去用組成物である。 - 特許庁
The compound of formula I is, for example, obtained by reacting a compound of formula II (L is an eliminable groupe) with a compound of the formula: R3-A-X. (A:置換基を有していてもよい低級アルキレン、アリーレン、ヘテロアリーレン又シクロアルキレン、X:NR^4、CONR^4、NR^4CO、O又はS、R^1、R^4:H、低級アルキル、−CO−低級アルキル又は−SO_2−低級アルキル、R^2:H、低級アルキル、ハロゲン、ハロゲンで置換された低級アルキル、−O−低級アルキル、−S−低級アルキル、−O−アリール、−O−低級アルキレン−アリール、−S−低級アルキレン−アリール、ニトロ又はシアノ基、R^3:−CO_2H、−CO_2−低級アルキル、−低級アルキレン−CO_2H、−低級アルキレン−CO_2−低級アルキル、−CONHOH、−CONHO−低級アルキル、−低級アルキレン−CONHOH、−NH_2、−(プロドラッグ化されたNH_2、) - 特許庁
The composition for removing a residue comprises an additive for removing the residue containing carbon dioxide, a fluoride expressed by the chemical formula NR^1R^2R^3R^4F (R^1, R^2, R^3 and R^4 are each hydrogen or an alkyl group), and a compatibilizing agent to dissolve the additive in the carbon dioxide liquefied under a high pressure. 微細構造体から残留物を除去するための組成物であって、二酸化炭素と、化学式NR^1R^2R^3R^4F(R^1、R^2、R^3およびR^4は、それぞれ独立して水素またはアルキル基を示す。)で示されるフッ化物を含む残留物除去用添加剤と、高圧下で液体状になっている前記二酸化炭素に前記添加剤を溶解させるための相溶化剤とを含むことを特徴とする残留物除去用組成物である。 - 特許庁
(R^4)_4-p-N^+-(R^5-OCO-R^6)_p X^-(2) (In the general formula (2), R^4 is a C1-C3 hydrocarbon group which can have a hydroxy group as a substituent and includes at least one C1-C3 hydrocarbon group having a hydroxy group when p is 2. (b)成分:下記一般式(2)で表される陽イオン界面活性剤 (R^4)_4-p−N^+−(R^5−OCO−R^6)_p X^- (2)〔式中、R^4は置換基としてヒドロキシ基を有していても良い炭素数1〜3の炭化水素基であるが、pが2の時はヒドロキシ基を有する炭素数1〜3の炭化水素基を少なくとも一つ含み、R^5は炭素数1〜3の2価の炭化水素基、R^6は炭素数15〜21の飽和炭化水素基、pは2又は3の数、X^-は陰イオン基を示す。 - 特許庁
The adhesive supply apparatus, which supplies an adhesive R curable by irradiation with ultraviolet rays, includes: a supply part 10 for linearly supplying the adhesive R to a workpiece S1; and an irradiation part 11 for irradiating ultraviolet rays having energy which is necessary for an adhesive to be cured at an interface of the adhesive R and the workpiece S1 together with supplying the adhesive R by the supply part 10. 紫外線の照射により硬化する接着剤Rを供給する接着剤供給装置において、ワークS1に対して線状に接着剤Rを供給する供給部10と、供給部10による接着剤Rの供給とともに、接着剤RにおけるワークS1との界面に対して、界面における接着剤が硬化するのに必要なエネルギーを有する紫外線を照射する照射部11と、を有する。 - 特許庁
The light source of the emission color is LEDs of the three primary colors (R-LED, G-LED, and B-LED). 発光色が三原色のLED(R−LED、G−LED、B−LED)を光源とする構成である。 - 特許庁
This lighting system ID is provided with the fluorescent lamp FL, a reflector R and a lighting circuit. 照明装置IDは、紫外線発光形蛍光ランプFL、反射体Rおよび点灯回路を具備している。 - 特許庁
LEDs of three colors R, G and B are driven with pulses to emit light, so that white electronic flash light is obtained. R,G,Bの3色のLEDをパルス駆動により発光させ、白色のストロボ光を得る構成である。 - 特許庁
In a selection shop established on a network, a sales Pokyara (R) selected by the owner of the selection shop is prepared. ネットワーク上に開設されているセレクトショップには、そのオーナーにより選択された売りぽキャラが用意されている。 - 特許庁
The magnetic flux of each pulse S and R are set in reverse direction, in order to extinguish the holding magnetic quantum. 各パルスS,Rは、保持した磁束量子を消滅可能なように磁束の向きが逆に設定されている。 - 特許庁
An aromatic carboxylic acid represented by formula (1) (X is H, R, Ph) and its acid chloride derivative and a method for producing the compounds are provided. 式(1)で表される芳香族カルボン酸およびその酸塩化物誘導体並びにそれらの製造方法。 - 特許庁
A similar position distribution calculation unit 126 calculates a distribution of the number of the similar positions by using the detection result r. 類似位置分布算出部126は、検出結果rを用いて、類似位置の数の分布を算出する。 - 特許庁